MAX391CSE+ - Precision Quad SPST Analog Switch | Analog Devices
MPN: MAX391CSE+ ✓ सक्रियMAX391CSE+ अवलोकन
An analog switch is an integrated semiconductor device that routes electrical signals between input and output terminals under digital control. The MAX391 belongs to the hierarchy analog switch → interface IC → semiconductor and is commonly used where a compact, low-power signal multiplexer must present low resistance and limited charge injection. Its four SPST channels provide independent routing rather than requiring one multiplexer to share a common terminal.
Key electrical characteristics include a 20 Ω typical on-resistance, guaranteed matching between channels, less than 2 Ω guaranteed on-resistance flatness over the signal range, maximum charge injection of 4 pC, and leakage below 2.5 nA at +85 °C. The manufacturer specifies ESD withstand above 2000 V by Method 3015.7, while power consumption remains below 1 µW. These characteristics support accurate acquisition, measurement, and control circuits where switch-induced error must remain small.
The MAX391 architecture uses complementary analog switches to provide normally closed operation and balanced switching behavior. Its specified on-resistance matching and flatness reduce gain variation between channels, while low charge injection limits timing errors when the device switches bipolar or high-impedance signals. The low-leakage specification is particularly useful in multiplexed measurement systems where off-state input current can create errors in high-impedance nodes.
Typical uses include battery-powered measurement systems, precision signal routers, automated test equipment, data acquisition modules, and industrial control interfaces. The +3 V to +15 V single-supply range supports modern low-voltage systems, while ±3 V to ±8 V dual-supply operation allows direct handling of bipolar signals without shifting the common-mode range. The 16-pin narrow SOIC package also simplifies assembly on conventional surface-mount PCB layouts.
When laying out a MAX391CSE+ circuit, keep analog input and output traces short, provide a stable ground reference, and place supply bypass capacitance close to the device. Consider the off-state leakage when the source impedance is high, because the specified 2.5 nA maximum at +85 °C can create an error comparable to several nanovolts across a megohm-scale source impedance. Use the manufacturer pin description and package drawing when making PCB assignments.
This product guide combines the MAX391CSE+ electrical characteristics, operating limits, package details, verified sourcing information, and practical design guidance. It also distinguishes true pin-compatible alternatives from functionally related devices, helping engineers evaluate replacement options without introducing a different footprint or unacceptable on-resistance change.
के लिए ड्रॉप-इन विकल्प MAX391CSE+ — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
MAX391CSE
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
MAX391ESE+
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
MAX391CSE+ Maximum Ratings और Electrical Characteristics
| Number of Channels | 4 channels |
| Switch Configuration | 4 × SPST, normally closed |
| Typical On-Resistance | 20 Ω |
| On-Resistance Flatness Over Signal Range | <2 Ω guaranteed |
| Maximum Charge Injection | 4 pC |
| Leakage Current at +85 °C | <2.5 nA |
| Single-Supply Operating Voltage | +3 V to +15 V |
| Dual-Supply Operating Voltage | ±3 V to ±8 V |
| Power Consumption | <1 µW |
| Electrostatic Discharge Withstand | >2000 V per Method 3015.7 |
| पैकेज | 16-pin narrow SOIC |
| पिन काउंट | 16 pins |
| माउंटिंग प्रकार | Surface mount |
MAX391CSE+ 16-pin narrow soic पिन कॉन्फ़िगरेशन गाइड
MAX391CSE+ (16-pin narrow soic पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: MAX391CSE+.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
MAX391CSE+ के लिए उपयुक्त है 6 अनुप्रयोगs: Battery-Powered Measurement Systems, Precision Data Acquisition, Automated Test Equipment, Industrial Control Interfaces, Precision Signal Routing, Low-Power Sensor Multiplexing.
Battery-Powered Measurement Systems
The MAX391CSE+ fits battery-powered measurement systems because its power consumption is below 1 µW and its single-supply operating range extends from +3 V to +15 V. Four normally closed SPST channels can route sensor, reference, or test signals without requiring a multiplexed common node. The 20 Ω typical on-resistance is suitable for moderate-impedance measurement paths, while the less-than-2.5 nA leakage specification at +85 °C helps limit error at high-impedance inputs. Use local supply bypassing and short analog traces to preserve the low-power, low-noise behavior expected from this precision interface IC.
अनुशंसित
Precision Data Acquisition
The MAX391CSE+ is appropriate for precision data-acquisition modules that route several sensor or conditioning outputs into a shared measurement chain. Its four independent normally closed SPST paths provide flexible signal isolation, and the 20 Ω typical on-resistance supports many low-to-moderate-impedance sensor interfaces. Guaranteed on-resistance flatness below 2 Ω over the signal range reduces level-dependent channel errors. When driving very high-impedance inputs, account for the specified off-state leakage below 2.5 nA at +85 °C and keep copper routing short to minimize capacitance and interference.
अनुशंसित
Automated Test Equipment
MAX391CSE+ switches are useful in automated test equipment for connecting test channels, programmable sources, and measurement resources. The 16-pin narrow SOIC package is easy to assemble on conventional test boards, while four independently controlled SPST switches simplify point-to-point routing. A 4 pC maximum charge injection supports repeatable control of timing-sensitive nodes, and the 20 Ω typical on-resistance is suitable for many low-frequency test paths. Keep switched signals away from high-speed control traces and use a single low-impedance ground reference to preserve measurement accuracy.
अनुशंसित
Industrial Control Interfaces
The MAX391CSE+ can route analog control and monitoring signals in industrial control interfaces because it supports both +3 V to +15 V single-supply systems and ±3 V to ±8 V bipolar systems. The bipolar configuration is useful when the switch must pass signals around ground without translating their voltage range. Its sub-1 µW power consumption is advantageous in distributed or low-power control modules, while four SPST channels provide independent selection paths. For long cable-adjacent traces, use guarding and a solid ground plane to reduce susceptibility to electrostatic discharge and switching noise.
अनुशंसित
Precision Signal Routing
The MAX391CSE+ is suited to precision signal-routing circuits that require low on-state resistance, consistent channel behavior, and low off-state leakage. Its 20 Ω typical on-resistance minimizes signal degradation in moderate-impedance paths, while guaranteed matching between channels helps preserve uniform system response. Normally closed operation can also support fail-safe routing when control logic is absent or held in a defined state. Designers should use short signal traces, avoid long stubs, and connect unused control pins according to the manufacturer pin-description table to prevent unintended switching states.
अनुशंसित
Low-Power Sensor Multiplexing
The MAX391CSE+ supports low-power sensor multiplexing where four signals must be connected selectively while keeping standby consumption below 1 µW. The +3 V minimum single-supply rating fits 3.3 V sensor systems, and the 16-pin narrow SOIC package supports compact surface-mount assemblies. Low leakage below 2.5 nA at +85 °C is particularly important when the multiplexer front end has high source impedance. Place bypass capacitance near the supply pins, maintain a continuous ground reference, and verify that the 20 Ω typical on-resistance is acceptable for the sensor output and acquisition input.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा MAX391CSE+ — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | MAX391CSE | MAX391ESE+ |
|---|---|---|---|
| Package | 16-pin narrow SOIC | 16-pin narrow SOIC | 16-pin narrow SOIC |
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Number of Channels | 4 channels | 4 channels | 4 channels |
| Switch Configuration | Quad SPST, normally closed | Quad SPST, normally closed | Quad SPST, normally closed |
| Ordering Designation | MAX391CSE+ | MAX391CSE | MAX391ESE+ |
मुख्य विशेषताएँ
- Lower on-resistance than the listed PS391CSE option (बनामPS391CSE)
- Four independently controlled precision channels (बनामPS391CSE)
- Operation from a single 3 V supply (बनामMAX391EUE+)
- Lower charge injection for precision switching (बनामPS391CSE)
डिज़ाइन नोट्स
Treat the 20 Ω typical on-resistance as part of the complete signal-path impedance. For a 100 Ω source, the switch can add 20% attenuation before considering receiver input impedance. For high-precision measurements, use the guaranteed on-resistance flatness below 2 Ω, calibrate the selected path where appropriate, and keep connector or cable resistance outside the switch measurement boundary.
Place the MAX391CSE+ close to the sources and destinations of the switched signals, and route the four analog channels away from digital control lines and fast clocking nets. Provide a low-impedance ground connection and local supply bypass capacitance. The device's below-1 µW power consumption does not eliminate the need for stable supply decoupling because switching transitions can still disturb sensitive analog nodes.
Do not assume that a shared 16-pin footprint makes every SPST switch interchangeable. PS391CSE is listed at 175 Ω versus the MAX391CSE+ typical value of 20 Ω, and MAX391EUE+ uses a TSSOP rather than the target narrow SOIC footprint. Confirm pin functions, control logic polarity, supply limits, leakage, charge injection, and on-resistance before approving any substitution.
For single-supply operation, remain within the specified +3 V to +15 V range. For bipolar operation, use the specified ±3 V to ±8 V range and observe the total voltage and absolute maximum limits in the manufacturer data sheet. Avoid using a supply combination that exceeds those limits even if the control inputs appear inactive.
अनुपालन जानकारी
The exact MAX391CSE+ compliance declarations are not stated in the manufacturer product-page excerpt. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals documentation with Analog Devices for the exact ordering code.