DG409DY+T - Dual 4:1 CMOS Analog Multiplexer | Analog Devices
MPN: DG409DY+T ✓ सक्रियDG409DY+T अवलोकन
An analog multiplexer is an interface IC that connects one selected source channel to a common destination while electrically isolating the unselected channels. In the product hierarchy, the DG409 belongs to analog switches and multiplexers, interface ICs, and semiconductor signal-routing devices. A differential 4:1 configuration is especially useful when a system must preserve two related signal paths, such as the positive and negative sides of a differential measurement or communication channel.
The DG409 series provides two 4:1 circuits, a 100 ohm on-resistance, and improved operation as a pin-compatible upgrade for the industry-standard DG408 and DG409 devices. According to the Analog Devices DG409 documentation, the family is intended for audio-signal routing, communication systems, data acquisition, guidance and control systems, sample-and-hold circuits, and test equipment. These applications benefit from centralized selection of one of four differential sources without requiring a separate switch for every signal pair.
Internally, the DG409 uses CMOS analog switching to control the selected paths. The two address inputs associated with each multiplexer determine which of the four differential channels is connected to the common outputs. Because the device combines address-controlled routing with a 16-pin SOIC footprint, it simplifies board layouts where multiple instrument or communication channels must be scanned through a shared analog front end.
Typical uses include multiplexers in automated test systems, differential signal acquisition modules, communication-channel selectors, sample-and-hold circuits, audio routing networks, and industrial control or guidance systems. The differential architecture reduces the number of external routing components compared with handling each polarity as an unrelated single-ended signal, while the integrated two-circuit count supports two simultaneous selection functions.
PCB design should preserve the manufacturer's pinout and decoupling guidance, keep analog traces short, and provide an adequate ground return around the mux. Verify that signal amplitudes remain inside the device's electrical limits and that downstream loads do not exceed the specified switch characteristics. Because the on-resistance contributes directly to signal loss and noise, sensitive acquisition paths should account for the 100 ohm switch impedance during gain and bandwidth planning.
This page combines the confirmed family and ordering details with practical routing guidance, pin-compatible alternatives, package comparisons, and design notes. The alternatives are separated by functional equivalence and manufacturing source so engineers can identify a board-compatible replacement without confusing it with a device that merely provides similar multiplexing functionality.
के लिए ड्रॉप-इन विकल्प DG409DY+T — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं DG409DY+T (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Multiplexer Configuration, Package, Mounting Type.
DG409DY-T1-E3
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
DG409DY-T1
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
DG409DYZ-T
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
DG409DY-T
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
ADG409BRZ
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
DG409DY+T विशेषताएं
| Multiplexer Configuration | Dual 4:1 differential |
| Number of Circuits | 2 circuits |
| On-Resistance | 100 ohm |
| पिन की संख्या | 16 pins |
| पैकेज | 16-pin narrow SOIC |
| माउंटिंग प्रकार | Surface mount |
| Process Technology | CMOS |
| Product Family | DG409 improved analog multiplexer series |
| Product Status | Production |
| Order Code | T tape-and-reel packaging |
| Differential Channel Count | 4 differential channels per circuit |
| Common Output Count | 2 common outputs for the dual configuration |
| Pin Compatibility | Pin-compatible with industry-standard DG408 and DG409 devices |
DG409DY+T 16-pin narrow soic पिन कॉन्फ़िगरेशन गाइड
DG409DY+T (16-pin narrow soic पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: DG409DY+T.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
DG409DY+T के लिए उपयुक्त है 6 अनुप्रयोगs: Differential Data Acquisition, Automated Test Equipment, Sample-and-Hold Signal Routing, Audio Signal Routing, Communication Channel Selection, Guidance and Control Systems.
Differential Data Acquisition
The DG409DY+T suits data-acquisition front ends that must route two related signal conductors together. Each of its two independent 4:1 sections selects one of four differential inputs and connects that pair to the common outputs. With a documented 100 ohm on-resistance, the switch can sit close to the sensor or conditioning stage to avoid adding long analog traces after selection. Designers should include the switch impedance in the ADC input model, check the selected source’s settling behavior, and preserve a low-impedance reference return to minimize conversion error.
अनुशंसित
Automated Test Equipment
The DG409DY+T can reduce the number of discrete switches in automated test equipment by selecting among four differential sources with two integrated circuits. Its two 4:1 circuits allow separate measurement paths to share a common instrument front end, while the 16-pin narrow SOIC package supports compact, high-density routing. The 100 ohm series resistance must be checked against the instrument input impedance, and the address controls should be timed so that acquisition begins only after the selected channel has settled. Ground-plane continuity and short analog traces are particularly important around sensitive test nodes.
अनुशंसित
Sample-and-Hold Signal Routing
The DG409DY+T is applicable to sample-and-hold systems requiring selection of one of several differential source channels before a shared sampling stage. Its dual 4:1 organization permits two selected paths to serve different sampling or conditioning functions. Because the documented on-resistance is 100 ohm, it contributes to source impedance, capacitor charging time, and thermal noise. The circuit should therefore account for the complete switch-and-hold network when setting acquisition time and accuracy rather than evaluating the sample-and-hold capacitor alone.
अनुशंसित
Audio Signal Routing
The DG409DY+T can route differential audio-source pairs within a communication or audio system by assigning one of four inputs to each common output. The dual architecture supports two routing sections in one 16-pin SOIC package and reduces board area compared with discrete switching networks. The 100 ohm on-resistance may be acceptable for many line-level routing tasks but should be compared with the load impedance to avoid excessive attenuation. Keep the analog path compact, maintain continuous ground references, and confirm that the selected source amplitude remains within the mux’s analog signal limits.
अनुशंसित
Communication Channel Selection
The DG409DY+T is appropriate for communication systems that must choose among multiple differential channels using a shared downstream circuit. Two independent 4:1 sections allow the same multiplexer family to support more than one signal pair, while the 16-pin SOIC package simplifies routing to the communications front end. Designers should validate logic thresholds, supply sequencing, channel transition behavior, and the 100 ohm switch resistance against the receiver or converter input. Keep digital address lines away from sensitive analog nodes to reduce coupling during channel changes.
अनुशंसित
Guidance and Control Systems
The DG409DY+T can select differential sensor or feedback paths in guidance and control systems where multiple inputs feed a common processing channel. Its two 4:1 circuits provide compact routing for two functions, and the documented pin-compatible DG409 footprint supports reuse of established analog boards. Control-loop stability should be evaluated with the 100 ohm switch resistance included in the system transfer function. Practical layouts should use an uninterrupted ground plane, short output routes, and stable bypass connections to minimize switching transients and control-signal corruption.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा DG409DY+T — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | DG409DY-T1-E3 | DG409DY-T1 | DG409DYZ-T | DG409DY-T | ADG409BRZ |
|---|---|---|---|---|---|---|
| Brand | Analog Devices | Vishay Intertechnology | Vishay Intertechnology | Renesas Electronics | Renesas Electronics | Analog Devices |
| Package | 16-pin narrow SOIC | 16-pin narrow SOIC | 16-pin narrow SOIC | 16-pin narrow SOIC | 16-pin narrow SOIC | 16-pin narrow SOIC |
| Multiplexer Configuration | Dual 4:1 differential | Dual 4:1 differential | Dual 4:1 differential | Dual 4:1 differential | Dual 4:1 differential | Dual 4:1 differential |
| Number of Circuits | 2 circuits | 2 circuits | 2 circuits | 2 circuits | 2 circuits | 2 circuits |
| Number of Pins | 16 pins | 16 pins | 16 pins | 16 pins | 16 pins | 16 pins |
| Technology | CMOS | CMOS analog multiplexer | DG409 CMOS family | DG409 CMOS family | DG409 CMOS family | CMOS analog multiplexer |
| Pin Compatibility | Pin-compatible upgrade for industry-standard DG408 and DG409 devices | DG409-family 16-SOIC footprint | DG409-family 16-SOIC footprint | DG409-family 16-SOIC footprint | DG409-family 16-SOIC footprint | Related 4-channel differential mux |
| Primary Applications | Audio routing, communications, data acquisition, guidance and control, sample-and-hold, and test equipment | Analog signal routing and channel selection | Analog signal routing and channel selection | Analog signal routing and channel selection | Analog signal routing and channel selection | Differential signal routing |
मुख्य विशेषताएँ
- Combines two differential selectors in one package (बनामDG409DY-T1-E3)
- Same documented 100 ohm switching impedance (बनामDG409DY-T1-E3)
- Exact 16-SOIC footprint continuity (बनामADG409BRZ)
- Production family positioning (बनामDG409DY-T)
डिज़ाइन नोट्स
Include the documented 100 ohm on-resistance in the complete source-to-destination model. Together with the signal source impedance and ADC or receiver input impedance, it creates an attenuation divider, while its Johnson-noise contribution can matter in high-gain measurement paths. Also account for parasitic capacitance when estimating channel settling after an address change.
Place the mux close to the shared analog destination so that the selected channel travels over a short trace. Maintain a continuous ground plane beneath and around the device, return analog currents directly to the system reference, and avoid routing the 100 ohm switch output through long copper traces. The 16-pin SOIC footprint should follow the manufacturer land pattern exactly.
Separate the address-control traces from sensitive analog inputs and outputs, particularly when several muxes share a connector or converter. Use a low-impedance ground reference and place the required bypass capacitors at the power pins according to the Analog Devices DG409 guidance. Ensure control transitions do not coincide with acquisition windows when switch settling could affect accuracy.
Do not treat the DG409DY+T as a single-ended mux merely because it uses a 16-pin package. Each functional section selects one of four differential pairs, and its positive and negative terminals must be assigned according to the manufacturer pin diagram. Verify supply voltage, logic thresholds, analog signal limits, temperature grade, and qualification before substituting another order code.
अनुपालन जानकारी
The device is an industrial/communications interface IC rather than an automotive-qualified product, but no specific RoHS, REACH, lead-free, or halogen-free declaration was confirmed.