MAX391CSE+ - Precision Quad SPST Analog Switch | Analog Devices
MPN: MAX391CSE+ ✓ AktifMAX391CSE+ Ringkasan
An analog switch is an integrated semiconductor device that routes electrical signals between input and output terminals under digital control. The MAX391 belongs to the hierarchy analog switch → interface IC → semiconductor and is commonly used where a compact, low-power signal multiplexer must present low resistance and limited charge injection. Its four SPST channels provide independent routing rather than requiring one multiplexer to share a common terminal.
Key electrical characteristics include a 20 Ω typical on-resistance, guaranteed matching between channels, less than 2 Ω guaranteed on-resistance flatness over the signal range, maximum charge injection of 4 pC, and leakage below 2.5 nA at +85 °C. The manufacturer specifies ESD withstand above 2000 V by Method 3015.7, while power consumption remains below 1 µW. These characteristics support accurate acquisition, measurement, and control circuits where switch-induced error must remain small.
The MAX391 architecture uses complementary analog switches to provide normally closed operation and balanced switching behavior. Its specified on-resistance matching and flatness reduce gain variation between channels, while low charge injection limits timing errors when the device switches bipolar or high-impedance signals. The low-leakage specification is particularly useful in multiplexed measurement systems where off-state input current can create errors in high-impedance nodes.
Typical uses include battery-powered measurement systems, precision signal routers, automated test equipment, data acquisition modules, and industrial control interfaces. The +3 V to +15 V single-supply range supports modern low-voltage systems, while ±3 V to ±8 V dual-supply operation allows direct handling of bipolar signals without shifting the common-mode range. The 16-pin narrow SOIC package also simplifies assembly on conventional surface-mount PCB layouts.
When laying out a MAX391CSE+ circuit, keep analog input and output traces short, provide a stable ground reference, and place supply bypass capacitance close to the device. Consider the off-state leakage when the source impedance is high, because the specified 2.5 nA maximum at +85 °C can create an error comparable to several nanovolts across a megohm-scale source impedance. Use the manufacturer pin description and package drawing when making PCB assignments.
This product guide combines the MAX391CSE+ electrical characteristics, operating limits, package details, verified sourcing information, and practical design guidance. It also distinguishes true pin-compatible alternatives from functionally related devices, helping engineers evaluate replacement options without introducing a different footprint or unacceptable on-resistance change.
Pilihan pengganti yang segera untuk MAX391CSE+ — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
MAX391CSE
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
MAX391ESE+
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
MAX391CSE+ Penilaian maksimum & Ciri-ciri Elektrik
| Number of Channels | 4 channels |
| Switch Configuration | 4 × SPST, normally closed |
| Typical On-Resistance | 20 Ω |
| On-Resistance Flatness Over Signal Range | <2 Ω guaranteed |
| Maximum Charge Injection | 4 pC |
| Leakage Current at +85 °C | <2.5 nA |
| Single-Supply Operating Voltage | +3 V to +15 V |
| Dual-Supply Operating Voltage | ±3 V to ±8 V |
| Power Consumption | <1 µW |
| Electrostatic Discharge Withstand | >2000 V per Method 3015.7 |
| Kemasan | 16-pin narrow SOIC |
| Kiraan Pin | 16 pins |
| Jenis Pemasangan | Surface mount |
Panduan Konfigurasi Pin MAX391CSE+ 16-pin narrow soic
Konfigurasi pin untuk MAX391CSE+ (16-pin narrow soic pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.
Tiada data garisan pin yang diperoleh untuk MAX391CSE+.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
MAX391CSE+ patut untuk 6 aplikasis: Battery-Powered Measurement Systems, Precision Data Acquisition, Automated Test Equipment, Industrial Control Interfaces, Precision Signal Routing, Low-Power Sensor Multiplexing.
Battery-Powered Measurement Systems
The MAX391CSE+ fits battery-powered measurement systems because its power consumption is below 1 µW and its single-supply operating range extends from +3 V to +15 V. Four normally closed SPST channels can route sensor, reference, or test signals without requiring a multiplexed common node. The 20 Ω typical on-resistance is suitable for moderate-impedance measurement paths, while the less-than-2.5 nA leakage specification at +85 °C helps limit error at high-impedance inputs. Use local supply bypassing and short analog traces to preserve the low-power, low-noise behavior expected from this precision interface IC.
Disebarkan
Precision Data Acquisition
The MAX391CSE+ is appropriate for precision data-acquisition modules that route several sensor or conditioning outputs into a shared measurement chain. Its four independent normally closed SPST paths provide flexible signal isolation, and the 20 Ω typical on-resistance supports many low-to-moderate-impedance sensor interfaces. Guaranteed on-resistance flatness below 2 Ω over the signal range reduces level-dependent channel errors. When driving very high-impedance inputs, account for the specified off-state leakage below 2.5 nA at +85 °C and keep copper routing short to minimize capacitance and interference.
Disebarkan
Automated Test Equipment
MAX391CSE+ switches are useful in automated test equipment for connecting test channels, programmable sources, and measurement resources. The 16-pin narrow SOIC package is easy to assemble on conventional test boards, while four independently controlled SPST switches simplify point-to-point routing. A 4 pC maximum charge injection supports repeatable control of timing-sensitive nodes, and the 20 Ω typical on-resistance is suitable for many low-frequency test paths. Keep switched signals away from high-speed control traces and use a single low-impedance ground reference to preserve measurement accuracy.
Disebarkan
Industrial Control Interfaces
The MAX391CSE+ can route analog control and monitoring signals in industrial control interfaces because it supports both +3 V to +15 V single-supply systems and ±3 V to ±8 V bipolar systems. The bipolar configuration is useful when the switch must pass signals around ground without translating their voltage range. Its sub-1 µW power consumption is advantageous in distributed or low-power control modules, while four SPST channels provide independent selection paths. For long cable-adjacent traces, use guarding and a solid ground plane to reduce susceptibility to electrostatic discharge and switching noise.
Disebarkan
Precision Signal Routing
The MAX391CSE+ is suited to precision signal-routing circuits that require low on-state resistance, consistent channel behavior, and low off-state leakage. Its 20 Ω typical on-resistance minimizes signal degradation in moderate-impedance paths, while guaranteed matching between channels helps preserve uniform system response. Normally closed operation can also support fail-safe routing when control logic is absent or held in a defined state. Designers should use short signal traces, avoid long stubs, and connect unused control pins according to the manufacturer pin-description table to prevent unintended switching states.
Disebarkan
Low-Power Sensor Multiplexing
The MAX391CSE+ supports low-power sensor multiplexing where four signals must be connected selectively while keeping standby consumption below 1 µW. The +3 V minimum single-supply rating fits 3.3 V sensor systems, and the 16-pin narrow SOIC package supports compact surface-mount assemblies. Low leakage below 2.5 nA at +85 °C is particularly important when the multiplexer front end has high source impedance. Place bypass capacitance near the supply pins, maintain a continuous ground reference, and verify that the 20 Ω typical on-resistance is acceptable for the sensor output and acquisition input.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk MAX391CSE+ — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | MAX391CSE | MAX391ESE+ |
|---|---|---|---|
| Package | 16-pin narrow SOIC | 16-pin narrow SOIC | 16-pin narrow SOIC |
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Number of Channels | 4 channels | 4 channels | 4 channels |
| Switch Configuration | Quad SPST, normally closed | Quad SPST, normally closed | Quad SPST, normally closed |
| Ordering Designation | MAX391CSE+ | MAX391CSE | MAX391ESE+ |
Penyeberangsung Jelas
- Lower on-resistance than the listed PS391CSE option (vsPS391CSE)
- Four independently controlled precision channels (vsPS391CSE)
- Operation from a single 3 V supply (vsMAX391EUE+)
- Lower charge injection for precision switching (vsPS391CSE)
Catatan Desain
Treat the 20 Ω typical on-resistance as part of the complete signal-path impedance. For a 100 Ω source, the switch can add 20% attenuation before considering receiver input impedance. For high-precision measurements, use the guaranteed on-resistance flatness below 2 Ω, calibrate the selected path where appropriate, and keep connector or cable resistance outside the switch measurement boundary.
Place the MAX391CSE+ close to the sources and destinations of the switched signals, and route the four analog channels away from digital control lines and fast clocking nets. Provide a low-impedance ground connection and local supply bypass capacitance. The device's below-1 µW power consumption does not eliminate the need for stable supply decoupling because switching transitions can still disturb sensitive analog nodes.
Do not assume that a shared 16-pin footprint makes every SPST switch interchangeable. PS391CSE is listed at 175 Ω versus the MAX391CSE+ typical value of 20 Ω, and MAX391EUE+ uses a TSSOP rather than the target narrow SOIC footprint. Confirm pin functions, control logic polarity, supply limits, leakage, charge injection, and on-resistance before approving any substitution.
For single-supply operation, remain within the specified +3 V to +15 V range. For bipolar operation, use the specified ±3 V to ±8 V range and observe the total voltage and absolute maximum limits in the manufacturer data sheet. Avoid using a supply combination that exceeds those limits even if the control inputs appear inactive.
Maklumat Kesediaan
The exact MAX391CSE+ compliance declarations are not stated in the manufacturer product-page excerpt. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals documentation with Analog Devices for the exact ordering code.