Analog Devices

MAX394CAP+ - Quad SPDT 35Ω Analog Switch | Analog Devices

MPN: MAX394CAP+ ✓ सक्रिय
5 V Vdss 35 Ω Rds(on) 20-SSOP Package
न्यूनतम ऑर्डर मात्रा: 1 |

MAX394CAP+ अवलोकन

The Analog Devices MAX394CAP+ is a low-voltage, quad SPDT CMOS analog switch with four independently selectable 2:1 channels, a 35 Ω on-resistance, and a 20-pin SSOP package. The device supports a 5 V supply, 130 ns maximum on-time, 75 ns maximum off-time, and 200 pA maximum off leakage. These characteristics make it suitable for routing low-voltage analog signals in test, measurement, communication, and industrial control systems.

A CMOS analog switch is a semiconductor device that uses MOSFETs to connect or disconnect signal paths under digital control. The MAX394 belongs to the broader analog switch and multiplexer hierarchy, which sits within interface ICs and semiconductor signal-routing components. Each SPDT channel can select one of two signal sources or route a common node to a selected destination, depending on the application and external connection arrangement.

The MAX394CAP+ provides four 2:1 switch circuits with a specified 35 Ω on-resistance. Its low-voltage operation is suitable for systems using 5 V-powered logic and low-level analog signals. The 130 ns on-time and 75 ns off-time provide fast transition behavior, while break-before-make operation helps prevent two switched paths from conducting simultaneously during changeover. The 200 pA off-leakage specification supports low-level measurement and sampling circuits.

The 20-SSOP package provides a compact surface-mount footprint for multiplexed analog routing. Because the package is not thermally exposed, board layout and ambient conditions remain important when multiple channels switch continuously. Signal integrity is influenced by source and load impedance, cable or trace capacitance, supply bypassing, and the timing of control signals. The device’s analog characteristics should therefore be evaluated together with the complete signal path rather than treated as isolated switch ratings.

Typical uses include multimeter and oscilloscope input routing, data-acquisition systems, communication-interface signal multiplexing, automated test equipment, and industrial measurement modules. The four channels can support parallel routing or switching functions, reducing the number of discrete relays or mechanical switch elements required on a compact instrument board. The device is also useful when a circuit must select between sensors, amplifiers, or external test signals.

Designers should place the supply bypass capacitor close to the device and route high-impedance signal traces away from switching-node outputs to minimize coupling. Control signals should meet the device’s input logic levels, and unused inputs should be connected to defined potentials rather than left floating. Confirm that source and load voltages remain within the device’s absolute maximum ratings and signal limits before finalizing the analog front end.

This page combines the MAX394CAP+ device specifications, sourcing guidance, functional comparison, and application-focused design notes to support faster component selection and PCB implementation. It also distinguishes exact drop-in interchangeability from merely similar analog switches, helping engineers preserve package, pinout, timing, and channel requirements during redesigns.

के लिए ड्रॉप-इन विकल्प MAX394CAP+ — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

MAX394CAP

✅ ड्रॉप-इन
📦 20-SSOP
Same 4-circuit 2:1 SPDT, 35 ohm and 20-SSOP configuration; MAX394CAP lacks the lead-free plus designation, 0% rated parameter difference

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

MAX394CAP+ Maximum Ratings और Electrical Characteristics

Number of Circuits 4 circuits
Multiplexer Configuration 2:1
Switch Configuration SPDT
On Resistance 35 Ω
सप्लाई वोल्टेज 5 V
Maximum On Time 130 ns
Maximum Off Time 75 ns
Maximum Off Leakage 200 pA
Switching Behavior Break-before-make
Technology CMOS
Product Type Low-voltage quad SPDT CMOS analog switch
Number of Terminals 20 terminals
पैकेज 20-SSOP
Package Code SSOP
Package Shape Rectangular
माउंटिंग प्रकार Surface mount
Package Width 5.30 mm
Package Body Length 0.209 inch
Temperature Grade Commercial

MAX394CAP+ 0.209 inch पिन कॉन्फ़िगरेशन गाइड

MAX394CAP+ (0.209 inch पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।

MAX394CAP+ के लिए 0.209 inch पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: MAX394CAP+.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

MAX394CAP+ के लिए उपयुक्त है 6 अनुप्रयोगs: Multimeter Signal Routing, Data Acquisition Multiplexing, Automated Test Equipment, Communication Signal Multiplexing, Industrial Sensor Selection, Oscilloscope Input Selection.

🔧

Multimeter Signal Routing

The MAX394CAP+ can route measurement signals among multiple input paths in a digital multimeter or handheld tester. Its four 2:1 channels provide compact SPDT routing, while 35 Ω on-resistance limits insertion loss and 200 pA off leakage helps preserve high-impedance measurements when a path is disconnected. The 130 ns on-time and 75 ns off-time support rapid range and function selection. Place the device near the measurement input so switched-node traces remain short, and account for the switch resistance when interpreting high-impedance readings.

🖥️

Data Acquisition Multiplexing

The MAX394CAP+ is suitable for multiplexing sensor, amplifier, or test signals in a compact data-acquisition module. Each of its four 2:1 channels can select a signal path without requiring a separate mechanical relay. The 35 Ω resistance is practical for many low-impedance source networks, and the 75 ns off-time plus 130 ns on-time permit fast acquisition sequencing. Validate the source impedance, input capacitance, and settling time together because switching speed alone does not determine whether the selected node reaches an accurate measurement.

🏭

Automated Test Equipment

The MAX394CAP+ helps automate signal routing in test systems by selecting among DUT pins, fixtures, references, or injected signals. Four independently controlled SPDT channels reduce the amount of board space needed for discrete switching hardware. Its break-before-make behavior helps prevent unintended path overlap during changeover, while 35 Ω on-resistance and 200 pA leakage support low-level test paths. Designers should terminate unused switch inputs, keep control traces away from sensitive analog nodes, and verify that source and load voltages remain within the device ratings.

🌐

Communication Signal Multiplexing

The MAX394CAP+ can multiplex low-voltage communication or control signals when a compact board needs selectable routes among multiple nodes. Its CMOS implementation and low 200 pA off leakage reduce interference between disconnected paths, while four channels provide parallel routing opportunities. The 35 Ω resistance may require correction when driving a high-impedance or capacitive load. Keep traces short, provide a local supply bypass capacitor, and use defined logic levels to ensure reliable control transitions at the operating temperature.

🏭

Industrial Sensor Selection

The MAX394CAP+ can select among multiple industrial sensor outputs before amplification or digitization. Four 2:1 SPDT circuits allow several sensor channels to share downstream conditioning hardware, while the low off leakage of 200 pA limits coupling into inactive inputs. The 35 Ω on-resistance can add to the source impedance and should be included in sensor-range calculations. Protect external sensor wiring from transients, maintain common ground quality, and verify the maximum switch voltage before connecting field-sourced signals.

📺

Oscilloscope Input Selection

The MAX394CAP+ can select test signals or input channels in a compact oscilloscope frontend. Its four 2:1 channels offer more routing density than individual mechanical selectors, and the 130 ns maximum on-time is short for many low-frequency measurement paths. The 35 Ω on-resistance and associated capacitance can alter probe loading and edge shape, so the complete input network should be characterized. Locate the device close to the protected input node and maintain short, guarded traces to minimize pickup and switching crosstalk.

अनुशंसित उत्पादों का सारांश

MAX394CAP Same-family low-voltage quad SPDT routing device उपयोग में: Multimeter Signal Routing, Data Acquisition Multiplexing, Automated Test Equipment, Industrial Sensor Selection, Oscilloscope Input Selection MAX3221IPWR Texas Instruments उपयोग में: Communication Signal Multiplexing
What is the MAX394CAP+ used for?
The MAX394CAP+ is a low-voltage quad SPDT CMOS analog switch used to route low-level analog signals under digital control. It contains four 2:1 switching circuits with 35 Ω on-resistance, 130 ns maximum on-time, 75 ns maximum off-time, and 200 pA maximum off leakage. According to the Analog Devices MAX394 product information, its four channels are intended for signal-routing applications where multiple sources or destinations must be selected electronically.
How many switch channels and pins does the MAX394CAP+ have?
The MAX394CAP+ contains four independent 2:1 SPDT switch circuits and has 20 package terminals. It is offered in a 20-SSOP surface-mount package measuring 0.209 inch by 5.30 mm in body dimensions. The four-channel arrangement allows a compact analog-routing circuit to replace multiple discrete switching elements, while the 20-pin footprint provides separate control and signal connections.
What is the on-resistance and switching speed of the MAX394CAP+?
The MAX394CAP+ has a specified on-resistance of 35 Ω, a maximum on-time of 130 ns, and a maximum off-time of 75 ns. These values make it suitable for routing signals in moderate-speed measurement and test systems. Analog Devices identifies the device as a low-voltage quad SPDT CMOS analog switch, and its break-before-make behavior prevents direct overlap during a transition.
Where can I download the MAX394CAP+ datasheet PDF?
The official MAX394CAP+ datasheet and supporting product information are available from Analog Devices on the MAX394 product page at https://www.analog.com/en/products/max394.html. Use the datasheet section of that page to locate the manufacturer PDF. The product page is the best starting point because it connects the exact MAX394 family documentation with the manufacturer’s technical support and product resources.
Where can I find the MAX394CAP+ pinout?
The MAX394CAP+ pinout is found in the pin configuration and truth-table sections of the Analog Devices MAX394 manufacturer datasheet. The component uses a 20-SSOP package with 20 terminals, so the package drawing and terminal table must be consulted together. Assign PCB tracks using the manufacturer’s numbered package diagram rather than relying on a generic SSOP footprint.
Where can I buy the MAX394CAP+ online?
The MAX394CAP+ can be requested through the Request a Quote form on this XAIPART page, which provides the appropriate route for current availability, quantity, and lead-time confirmation. The manufacturer product page and distributor records can also be used to verify the exact MPN and 20-SSOP configuration before committing the part to a bill of materials.
What is the price of the MAX394CAP+?
The current unit price and volume breaks for the MAX394CAP+ are available through the Request a Quote form on this page. Pricing can vary with order quantity, production allocation, and package configuration, so an up-to-date quotation is more useful than a static catalog figure. Confirm that the quote identifies the exact MAX394CAP+ ordering code and the required 20-SSOP package.
What is the lead time for the MAX394CAP+?
The current lead time for the MAX394CAP+ should be confirmed through the Request a Quote form on this page. Lead time can change with order size, inventory position, and production scheduling, particularly when a complete quantity and target delivery date are provided. The Analog Devices MAX394 product page is also useful for confirming whether the MAX394 family remains the active product path.
Is the MAX394CAP+ in stock?
Current stock for the MAX394CAP+ should be requested through the Request a Quote form on this page. Distributor listings can change rapidly and may represent different quantities, package codes, or order conditions, so a confirmed quotation is the appropriate source for allocation. Specify your required quantity, date code preference, and destination country when requesting the quote.
MAX394CAP+ vs MAX394CAP - which is the better choice?
MAX394CAP+ is the lead-free ordering designation associated with the MAX394 product family, while MAX394CAP is the non-plus ordering code. Both identify the same 4-circuit, 2:1 SPDT, 35 Ω, 20-SSOP switching function. For new RoHS-controlled production designs, MAX394CAP+ is normally the appropriate designation, subject to the ordering information and package markings in the manufacturer documentation.
What is the difference between MAX394CAP+ and MAX394?
MAX394 is the base family designation, while MAX394CAP+ identifies a specific package and ordering configuration within that family. The verified MAX394CAP+ listing specifies four 2:1 SPDT circuits, 35 Ω on-resistance, and a 20-SSOP package. Engineers should compare the full ordering codes and manufacturer pin configuration rather than treating MAX394 as a complete package-qualified orderable part.
When should I choose MAX394CAP+ instead of MAX394CAP?
Choose MAX394CAP+ when the purchasing system requires the plus-designated lead-free ordering code for the MAX394 family. The functional switch characteristics remain four 2:1 SPDT channels with 35 Ω on-resistance in a 20-SSOP package. Choose MAX394CAP only when legacy inventory, an approved bill of materials, or a formal manufacturer ordering record specifically requires that suffix.
Is the MAX394CAP+ suitable for a low-voltage measurement circuit?
The MAX394CAP+ is suitable for many low-voltage measurement circuits because it provides four low-voltage 2:1 SPDT channels, 35 Ω on-resistance, and 200 pA maximum off leakage. Its 130 ns on-time and 75 ns off-time support reasonably fast routing. Suitability still depends on signal amplitude, source impedance, capacitance, leakage requirements, and whether the selected logic levels match the control interface.
What can replace the MAX394CAP+?
The MAX394CAP itself is the closest identified drop-in alternative because it has the same four-channel 2:1 SPDT, 35 Ω, 20-SSOP configuration; the principal difference is the lead-free plus designation. No additional pin-compatible cross-brand replacement was established without a verifiable manufacturer pinout and matched electrical specification. Before substituting another manufacturer’s switch, confirm all 20 pins, control logic, on-resistance, leakage, timing, and absolute maximum ratings.
Is there a Maxim equivalent for the MAX394CAP+?
The MAX394CAP+ is itself a Maxim Integrated product now represented under Analog Devices following the Maxim and Analog Devices combination. MAX394CAP provides the closest same-family ordering option with the same 4-channel, 2:1 SPDT, 35 Ω, and 20-SSOP configuration, although it does not carry the plus designation. Use the Analog Devices MAX394 product page as the authoritative family reference.
What are the key specifications of MAX394CAP+ that engineers should know?
The key MAX394CAP+ specifications are four 2:1 SPDT channels, 35 Ω on-resistance, 5 V supply operation, 130 ns maximum on-time, 75 ns maximum off-time, and 200 pA maximum off leakage. The device uses a 20-SSOP surface-mount package and provides break-before-make switching. These figures define its core signal-routing speed, impedance, leakage, logic-supply, and PCB-footprint requirements.

के लिए इंजीनियरिंग संदर्भ डेटा MAX394CAP+ — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose MAX394CAP+ when implementing a compact, low-voltage analog-routing circuit that requires four 2:1 SPDT channels in a 20-SSOP package and whose purchasing specification calls for the plus-designated lead-free code. Its 35 Ω on-resistance, 130 ns maximum on-time, 75 ns maximum off-time, and 200 pA maximum off leakage make it appropriate for many measurement, test, communication, and sensor-selection circuits. Choose MAX394CAP when an approved legacy BOM or formal ordering record requires the non-plus code; the electrical configuration is the same. Do not substitute a generic analog switch solely because its channel count and package resemble the MAX394. Verify the 20-pin assignment, control logic, voltage ratings, on-resistance, leakage, switching time, and break-before-make behavior. The primary design trade-off is that the 35 Ω path resistance can affect high-impedance sources, while the 130 ns/75 ns timing does not by itself guarantee complete settling in a capacitive node.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद MAX394CAP
Brand Analog Devices Analog Devices
Package 20-SSOP 20-SSOP
Number of Circuits 4 circuits 4 circuits
Multiplexer Configuration 2:1 2:1
Switch Configuration SPDT SPDT
On Resistance 35 Ω 35 Ω
Maximum On Time 130 ns 130 ns
Maximum Off Time 75 ns 75 ns
Maximum Off Leakage 200 pA 200 pA
Supply Voltage 5 V 5 V
Switching Behavior Break-before-make Break-before-make
Ordering Designation Plus-designated lead-free ordering code Ordering code without plus suffix

मुख्य विशेषताएँ

  • Four routing channels in one compact package (बनामMAX394CAP)
  • Lead-free ordering designation (बनामMAX394CAP)
  • Fast transition performance for compact analog routing (बनामMAX394CAP)

डिज़ाइन नोट्स

Treat the 35 Ω on-resistance as part of the complete source-to-load network. It can produce a measurable voltage division with the source impedance and interact with switch capacitance to slow edges. For high-impedance sensors or long cables, use an amplifier with low input capacitance or redesign the interface so the MAX394CAP+ switches a signal that tolerates its resistance and capacitance.

Place the device close to the routed signal nodes and keep switched-node traces short. Route high-impedance analog paths away from digital control traces and switching outputs, and use a ground plane that provides a low-impedance return path. When four channels switch simultaneously, check whether crosstalk between channels is acceptable for the signal bandwidth and source impedance.

Do not treat the MAX394CAP and MAX394CAP+ ordering codes as separate electrical designs without checking the manufacturer ordering table. Both provide the same four-channel 2:1 SPDT function in 20-SSOP, but purchasing requirements may distinguish the plus designation. Also ensure all unused inputs are tied to a defined potential and that control signals meet the specified logic levels.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The MAX394CAP+ ordering designation includes a plus suffix commonly associated with lead-free versions, but no explicit RoHS, REACH, halogen-free, or conflict-minerals statement was established from the manufacturer documentation. AEC-Q100 is not applicable because this product is not an automotive-qualified device.

डेटा सत्यापन तिथि: 2026-11-14 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

MAX394CAP+ datasheet MAX394CAP+ datasheet pdf MAX394CAP+ pinout MAX394CAP+ specifications MAX394CAP+ equivalent MAX394CAP+ replacement MAX394CAP+ cross reference MAX394CAP+ vs MAX394CAP MAX394CAP+ 20-SSOP MAX394CAP+ analog switch Analog Devices MAX394CAP+ MAX394CAP+ price MAX394CAP+ stock where to buy MAX394CAP+

संबंधित कंपोनेंट्स और शब्द

Analog Devices MAX394CAP+ MAX394CAP MAX394 MAX3221IPWR analog switch SPDT switch 2:1 multiplexer CMOS analog switch interface IC signal routing on-resistance off leakage break-before-make 20-SSOP SSOP package family surface-mount package SMD low-voltage circuit test and measurement data acquisition industrial sensor selection automated test equipment communication interface multiplexer
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें