MAX394CAP+ - Quad SPDT 35Ω Analog Switch | Analog Devices
MPN: MAX394CAP+ ✓ 啟用中MAX394CAP+ 概覽
A CMOS analog switch is a semiconductor device that uses MOSFETs to connect or disconnect signal paths under digital control. The MAX394 belongs to the broader analog switch and multiplexer hierarchy, which sits within interface ICs and semiconductor signal-routing components. Each SPDT channel can select one of two signal sources or route a common node to a selected destination, depending on the application and external connection arrangement.
The MAX394CAP+ provides four 2:1 switch circuits with a specified 35 Ω on-resistance. Its low-voltage operation is suitable for systems using 5 V-powered logic and low-level analog signals. The 130 ns on-time and 75 ns off-time provide fast transition behavior, while break-before-make operation helps prevent two switched paths from conducting simultaneously during changeover. The 200 pA off-leakage specification supports low-level measurement and sampling circuits.
The 20-SSOP package provides a compact surface-mount footprint for multiplexed analog routing. Because the package is not thermally exposed, board layout and ambient conditions remain important when multiple channels switch continuously. Signal integrity is influenced by source and load impedance, cable or trace capacitance, supply bypassing, and the timing of control signals. The device’s analog characteristics should therefore be evaluated together with the complete signal path rather than treated as isolated switch ratings.
Typical uses include multimeter and oscilloscope input routing, data-acquisition systems, communication-interface signal multiplexing, automated test equipment, and industrial measurement modules. The four channels can support parallel routing or switching functions, reducing the number of discrete relays or mechanical switch elements required on a compact instrument board. The device is also useful when a circuit must select between sensors, amplifiers, or external test signals.
Designers should place the supply bypass capacitor close to the device and route high-impedance signal traces away from switching-node outputs to minimize coupling. Control signals should meet the device’s input logic levels, and unused inputs should be connected to defined potentials rather than left floating. Confirm that source and load voltages remain within the device’s absolute maximum ratings and signal limits before finalizing the analog front end.
This page combines the MAX394CAP+ device specifications, sourcing guidance, functional comparison, and application-focused design notes to support faster component selection and PCB implementation. It also distinguishes exact drop-in interchangeability from merely similar analog switches, helping engineers preserve package, pinout, timing, and channel requirements during redesigns.
直接替換替代品,適用於 MAX394CAP+ — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
MAX394CAP
✅ 直接替換📋 參考替代品(不在目錄中)
MAX394CAP+ 最大額定值與電氣特性
| Number of Circuits | 4 circuits |
| Multiplexer Configuration | 2:1 |
| Switch Configuration | SPDT |
| On Resistance | 35 Ω |
| 供應電壓 | 5 V |
| Maximum On Time | 130 ns |
| Maximum Off Time | 75 ns |
| Maximum Off Leakage | 200 pA |
| Switching Behavior | Break-before-make |
| Technology | CMOS |
| Product Type | Low-voltage quad SPDT CMOS analog switch |
| Number of Terminals | 20 terminals |
| 封裝 | 20-SSOP |
| Package Code | SSOP |
| Package Shape | Rectangular |
| 安裝類型 | Surface mount |
| Package Width | 5.30 mm |
| Package Body Length | 0.209 inch |
| Temperature Grade | Commercial |
MAX394CAP+ 0.209 inch 腳位配置指南
MAX394CAP+(0.209 inch 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: MAX394CAP+.
請參閱 資料表 以查看完整腳位配置。
典型應用
MAX394CAP+ 適用於 6 應用s: Multimeter Signal Routing, Data Acquisition Multiplexing, Automated Test Equipment, Communication Signal Multiplexing, Industrial Sensor Selection, Oscilloscope Input Selection.
Multimeter Signal Routing
The MAX394CAP+ can route measurement signals among multiple input paths in a digital multimeter or handheld tester. Its four 2:1 channels provide compact SPDT routing, while 35 Ω on-resistance limits insertion loss and 200 pA off leakage helps preserve high-impedance measurements when a path is disconnected. The 130 ns on-time and 75 ns off-time support rapid range and function selection. Place the device near the measurement input so switched-node traces remain short, and account for the switch resistance when interpreting high-impedance readings.
推薦
Data Acquisition Multiplexing
The MAX394CAP+ is suitable for multiplexing sensor, amplifier, or test signals in a compact data-acquisition module. Each of its four 2:1 channels can select a signal path without requiring a separate mechanical relay. The 35 Ω resistance is practical for many low-impedance source networks, and the 75 ns off-time plus 130 ns on-time permit fast acquisition sequencing. Validate the source impedance, input capacitance, and settling time together because switching speed alone does not determine whether the selected node reaches an accurate measurement.
推薦
Automated Test Equipment
The MAX394CAP+ helps automate signal routing in test systems by selecting among DUT pins, fixtures, references, or injected signals. Four independently controlled SPDT channels reduce the amount of board space needed for discrete switching hardware. Its break-before-make behavior helps prevent unintended path overlap during changeover, while 35 Ω on-resistance and 200 pA leakage support low-level test paths. Designers should terminate unused switch inputs, keep control traces away from sensitive analog nodes, and verify that source and load voltages remain within the device ratings.
推薦
Communication Signal Multiplexing
The MAX394CAP+ can multiplex low-voltage communication or control signals when a compact board needs selectable routes among multiple nodes. Its CMOS implementation and low 200 pA off leakage reduce interference between disconnected paths, while four channels provide parallel routing opportunities. The 35 Ω resistance may require correction when driving a high-impedance or capacitive load. Keep traces short, provide a local supply bypass capacitor, and use defined logic levels to ensure reliable control transitions at the operating temperature.
推薦
Industrial Sensor Selection
The MAX394CAP+ can select among multiple industrial sensor outputs before amplification or digitization. Four 2:1 SPDT circuits allow several sensor channels to share downstream conditioning hardware, while the low off leakage of 200 pA limits coupling into inactive inputs. The 35 Ω on-resistance can add to the source impedance and should be included in sensor-range calculations. Protect external sensor wiring from transients, maintain common ground quality, and verify the maximum switch voltage before connecting field-sourced signals.
推薦
Oscilloscope Input Selection
The MAX394CAP+ can select test signals or input channels in a compact oscilloscope frontend. Its four 2:1 channels offer more routing density than individual mechanical selectors, and the 130 ns maximum on-time is short for many low-frequency measurement paths. The 35 Ω on-resistance and associated capacitance can alter probe loading and edge shape, so the complete input network should be characterized. Locate the device close to the protected input node and maintain short, guarded traces to minimize pickup and switching crosstalk.
推薦
推薦產品摘要
工程參考資料,適用於 MAX394CAP+ — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MAX394CAP |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Package | 20-SSOP | 20-SSOP |
| Number of Circuits | 4 circuits | 4 circuits |
| Multiplexer Configuration | 2:1 | 2:1 |
| Switch Configuration | SPDT | SPDT |
| On Resistance | 35 Ω | 35 Ω |
| Maximum On Time | 130 ns | 130 ns |
| Maximum Off Time | 75 ns | 75 ns |
| Maximum Off Leakage | 200 pA | 200 pA |
| Supply Voltage | 5 V | 5 V |
| Switching Behavior | Break-before-make | Break-before-make |
| Ordering Designation | Plus-designated lead-free ordering code | Ordering code without plus suffix |
主要差異化特點
- Four routing channels in one compact package (對比MAX394CAP)
- Lead-free ordering designation (對比MAX394CAP)
- Fast transition performance for compact analog routing (對比MAX394CAP)
設計說明
Treat the 35 Ω on-resistance as part of the complete source-to-load network. It can produce a measurable voltage division with the source impedance and interact with switch capacitance to slow edges. For high-impedance sensors or long cables, use an amplifier with low input capacitance or redesign the interface so the MAX394CAP+ switches a signal that tolerates its resistance and capacitance.
Place the device close to the routed signal nodes and keep switched-node traces short. Route high-impedance analog paths away from digital control traces and switching outputs, and use a ground plane that provides a low-impedance return path. When four channels switch simultaneously, check whether crosstalk between channels is acceptable for the signal bandwidth and source impedance.
Do not treat the MAX394CAP and MAX394CAP+ ordering codes as separate electrical designs without checking the manufacturer ordering table. Both provide the same four-channel 2:1 SPDT function in 20-SSOP, but purchasing requirements may distinguish the plus designation. Also ensure all unused inputs are tied to a defined potential and that control signals meet the specified logic levels.
合規資訊
The MAX394CAP+ ordering designation includes a plus suffix commonly associated with lead-free versions, but no explicit RoHS, REACH, halogen-free, or conflict-minerals statement was established from the manufacturer documentation. AEC-Q100 is not applicable because this product is not an automotive-qualified device.