Microchip Technology

MCP3422A5-E/MS - 18-Bit I2C ADC | Microchip Technology

MPN: MCP3422A5-E/MS ✓ सक्रिय
8-MSOP Package
न्यूनतम ऑर्डर मात्रा: 1 |

MCP3422A5-E/MS अवलोकन

The Microchip Technology MCP3422A5-E/MS is an 18-bit, two-input sigma-delta analog-to-digital converter with an I2C interface and an on-board reference, packaged in an 8-MSOP. It converts analog input voltages into high-resolution digital measurements for low-speed sensing systems. The manufacturer identifies the device as a 1 sigma-delta ADC, while distributor listings describe the family as a multichannel converter with approximately 4 samples per second operation.

An ADC is a data-conversion IC that transforms an analog voltage into a numeric value for processing, measurement, logging, or control. The MCP3422 belongs to the broader ADC hierarchy and specifically uses a delta-sigma conversion architecture. Its differential or single-ended input architecture, onboard voltage reference, and serial I2C interface reduce the number of external signal-conditioning and communications components required in compact embedded designs.

The principal feature of the MCP3422A5-E/MS is its 18-bit resolution. Resolution determines the number of discrete codes available across the converter range, making the device suitable for sensors that produce small voltage changes. Its 8-pin MSOP construction supports compact PCB layouts, while the I2C interface allows the converter to share a two-wire bus with a microcontroller or other compatible peripherals.

The delta-sigma architecture emphasizes resolution and noise performance for low-frequency signals rather than high-speed waveform capture. The approximately 4 samples per second operating rate shown in the product listing makes repeated readings practical for temperature, pressure, chemical, and other slowly changing sensor measurements. Designers should use the manufacturer pin-description table when assigning analog inputs, reference connections, ground returns, and I2C signals to PCB tracks.

Typical uses include industrial process monitoring, environmental sensing, laboratory instrumentation, and portable equipment that records slowly varying analog quantities. Differential measurement can help reject common-mode noise when the sensor is referenced to a remote or noisy ground. Single-channel operation is also useful where one transducer must be measured with minimum analog front-end complexity.

The main design consideration is digital-noise coupling. Place the analog input traces away from switching nodes and route a quiet ground return beneath or alongside the measurement path. Confirm the selected conversion rate, input range, reference behavior, and capacitor requirements in the manufacturer datasheet before finalizing filtering, gain, and sampling timing.

This page consolidates the verified product identity, package information, sourcing path, family drop-in options, and practical ADC design guidance. It also organizes the selection trade-offs among MCP3422 conversion-rate variants and separates verified product facts from parameters that require an engineering review.

के लिए ड्रॉप-इन विकल्प MCP3422A5-E/MS — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं MCP3422A5-E/MS (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Resolution, Differential Input Range, Digital Interface, Input Architecture, Package.

Microchip Technology
Resolution: Up to 18 bits
Differential Input Range: ±2.048 V
Input Architecture: 2 differential inputs
Microchip Technology
Resolution: 18 bits
Differential Input Range: Plus or minus 2.048 V
Digital Interface: Two-wire I2C-compatible serial interface
Microchip Technology
Differential Input Range: +/-2.048 V
Microchip Technology
Resolution: 18 bits
Differential Input Range: ±2.048 V
Digital Interface: I²C

MCP3422A6-E/MS

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
Microchip Technology
📦 8-MSOP
18 bits · 2 inputs · Differential · Delta-sigma (ΣΔ) · 3.75 Hz · 2.7 V to 5.5 V · 2.048 V · ±2.048 V

कीमत के लिए संपर्क करें

डेटाशीट देखें →

MCP3422A2-E/MS

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
Microchip Technology
📦 8-MSOP
18-bit delta-sigma ADC · 18 bit · 2 differential inputs · 3.75 kSPS · 2.7 V to 5.5 V · 2.048 V · +/-2.048 V · Integrated, programmable

कीमत के लिए संपर्क करें

डेटाशीट देखें →

MCP3422A1-E/MS

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
Microchip Technology
📦 8-MSOP
18 bits · 2 channels · Differential · Delta-sigma (Delta-Sigma) · 4 samples per second · 2.048 V · Plus or minus 2.048 V · 2.7 V to 5.5 V

कीमत के लिए संपर्क करें

डेटाशीट देखें →

MCP3422A0-E/MS

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
Microchip Technology
📦 8-MSOP
Delta-sigma (ΔΣ) · Up to 18 bits · 2 channels · 2 differential inputs · 3.75 samples/s · 2.7 V to 5.5 V · 145 µA · 2.048 V

कीमत के लिए संपर्क करें

डेटाशीट देखें →

MCP3422A7T-E/MS

✅ ड्रॉप-इन
📦 8-MSOP
Same 18-bit, 8-MSOP MCP3422 function set and 8-pin footprint; A7T differs in conversion-rate code and reel packing from A5-E/MS.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

MCP3422A5-E/MS Maximum Ratings और Electrical Characteristics

Converter Type 1 sigma-delta ADC
रेज़ोल्यूशन 18 bit
Input Architecture 2 analog inputs
Conversion Rate Approximately 4 samples per second
Digital Interface I2C
Internal Reference On-board voltage reference
पैकेज 8-MSOP
Package Pin Count 8 pins
Package Width 3.00 mm
Package Length 0.118 inch
माउंटिंग प्रकार Surface mount
Product Type Multichannel 18-bit delta-sigma ADC
Signal Interface 2-wire serial I2C
लाइफसाइकिल स्थिति Active

MCP3422A5-E/MS 0.118 inch पिन कॉन्फ़िगरेशन गाइड

MCP3422A5-E/MS (0.118 inch पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।

MCP3422A5-E/MS के लिए 0.118 inch पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: MCP3422A5-E/MS.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

MCP3422A5-E/MS के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Process Monitoring, Environmental Sensor Acquisition, Laboratory Measurement Instrumentation, Battery-Powered Portable Instruments, Automotive Sensor Interface, Precision Control Feedback.

🏭

Industrial Process Monitoring

The MCP3422A5-E/MS fits industrial process monitoring where a pressure, level, or chemical sensor changes more slowly than the approximately 4 samples per second acquisition rate. Its 18-bit conversion resolution preserves fine measurement detail, while two analog inputs support a compact multi-sensor arrangement. Place the converter behind the transmitter or sensor front end, use the I2C interface to transfer results to a controller, and isolate analog traces from motor and relay switching paths. Differential input wiring can reduce common-mode disturbance when the sensor ground is not perfectly quiet, although gain, input range, and filtering must be confirmed in the manufacturer datasheet.

🧩

Environmental Sensor Acquisition

The MCP3422A5-E/MS is appropriate for temperature, humidity, gas, and light sensors whose analog output evolves gradually. An 18-bit ADC provides a high nominal code count, allowing small sensor-voltage changes to be represented more finely than with a lower-resolution converter. The two-input arrangement can monitor a sensing element and a reference or auxiliary channel when the manufacturer configuration permits it. Use local filtering to suppress broadband noise, maintain a low-impedance source at the converter inputs, and read the I2C results on a schedule matched to the sensor’s physical response time rather than the converter’s maximum conversion capability.

🔧

Laboratory Measurement Instrumentation

The MCP3422A5-E/MS can serve as the analog measurement front end in a compact laboratory instrument when the input changes slowly enough for approximately 4 samples per second operation. Its 18-bit resolution, I2C interface, and onboard reference reduce the number of separate digital-interface and reference components required around the converter. For bench measurements, decouple the supply close to the device, keep the analog return path short, and establish the input gain before the converter range. Verify the selected gain mode, offset behavior, conversion timing, and source-impedance limits in the manufacturer datasheet, since those parameters determine whether additional buffering or filtering is required.

📱

Battery-Powered Portable Instruments

The MCP3422A5-E/MS supports compact, battery-powered measurement products that periodically sample a sensor rather than continuously capture a waveform. Two analog inputs can reduce the number of separate converters needed in a multichannel instrument, and the I2C bus permits shared communication with a low-power controller. The exact operating current and voltage range are not stated in the verified product summary, so battery sizing must use the manufacturer electrical characteristics rather than assumptions. Confirm sleep or conversion strategy, logic-level compatibility, and reference behavior to preserve the intended measurement accuracy between updates.

🚗

Automotive Sensor Interface

MCP3422A7T-E/MS is the automotive-oriented option within the MCP3422 family, while the MCP3422A5-E/MS provides the approximately 4 samples per second conversion profile. Both use the 8-MSOP format and 18-bit ADC architecture, making the family useful for slow-changing vehicle sensors when the exact qualification and electrical requirements match the system. An automotive design must verify the selected suffix’s qualification, temperature range, supply limits, and EMC requirements in the manufacturer documentation. Do not use the standard A5 device for an automotive requirement unless the specific ordering code is explicitly listed for that grade.

⚡

Precision Control Feedback

The MCP3422A5-E/MS can close a slow control loop by measuring an analog feedback voltage and delivering the result through I2C to a controller. Its 18-bit nominal resolution is useful when the control action depends on small error signals rather than only the absolute process value. Keep the feedback trace short, use a dedicated analog ground return, and place any input filter close to the device to minimize pickup. Because the MCP3422A5 conversion rate is approximately 4 samples per second, confirm that this update interval satisfies the control dynamics. If the process changes faster, select another MCP3422 rate suffix and revalidate loop stability and acquisition latency.

What is the MCP3422A5-E/MS?
The MCP3422A5-E/MS is an 18-bit, two-input sigma-delta analog-to-digital converter with an I2C interface and onboard reference. According to the Microchip Technology product information, it is an 8-MSOP device intended for high-resolution measurement of low-frequency analog signals. The approximately 4 samples per second conversion rate shown in the product listing makes it most appropriate for sensors whose values change slowly rather than for high-speed waveform capture.
What are the key specifications of MCP3422A5-E/MS that engineers should know?
The MCP3422A5-E/MS combines 18-bit resolution, two analog inputs, delta-sigma conversion, an I2C digital interface, and an onboard reference in an 8-MSOP package. Distributor product information identifies the MCP3422 family as a multichannel ADC with approximately 4 samples per second operation. Confirm the supply voltage, input range, electrical noise, and temperature limits in the manufacturer datasheet before final component qualification.
Where can I download the MCP3422A5-E/MS datasheet PDF?
The MCP3422A5-E/MS datasheet is available through the product’s datasheet listing on AllDataSheet, which identifies the document as the Microchip MCP3422 datasheet for the 18-bit, multichannel delta-sigma ADC. Use the manufacturer pin-description and electrical-characteristics tables when finalizing the design. The linked document should be reviewed alongside the exact ordering code MCP3422A5-E/MS and its 8-MSOP package configuration.
Where can I find the MCP3422A5-E/MS pinout?
The MCP3422A5-E/MS pinout is documented in the manufacturer pin-description table for the 8-MSOP package. The verified product information confirms an eight-pin MSOP but does not enumerate the individual pin functions, so consult the official MCP3422 datasheet before wiring analog inputs, supply pins, ground, and I2C signals. Do not infer pin assignments from the package drawing alone because exposed functions such as analog inputs and reference connections require device-specific verification.
Is MCP3422A5-E/MS suitable for low-speed sensor measurement?
Yes, the MCP3422A5-E/MS is well matched to slow-changing sensor signals because it provides 18-bit resolution at an approximately 4 samples per second conversion rate. It can support temperature, pressure, chemical, and process measurements where the signal changes gradually and high absolute resolution is more useful than rapid sampling. The actual usable accuracy also depends on reference stability, analog filtering, source impedance, and correct differential or single-ended wiring.
MCP3422A5-E/MS vs MCP3422A2T-E/MS — which conversion speed should I choose?
Choose the MCP3422A5-E/MS when the measurement can be sampled at approximately 4 samples per second; the MCP3422A2T-E/MS belongs to the faster MCP3422 family. Both devices are identified as 18-bit, 8-MSOP converters with I2C connectivity, but the conversion-rate suffix changes the acquisition time. Verify the exact timing, gain, and noise specifications for each device before using one as a drop-in substitute.
When should I choose MCP3422A5-E/MS over MCP3422A6-E/MS?
Choose the MCP3422A5-E/MS when approximately 4 samples per second is sufficient and you want the higher-rate member of the MCP3422 family. The MCP3422A6-E/MS is another 8-pin, 18-bit family member intended for a different conversion-rate option. The practical decision is acquisition time versus signal bandwidth: select the variant that completes each conversion within the measurement update interval while retaining the required resolution and noise performance.
What is the best drop-in replacement for MCP3422A5-E/MS?
The closest same-family drop-in choices are MCP3422A6-E/MS and MCP3422A2-E/MS because they use the same 8-MSOP format and preserve the MCP3422 function set. They are not performance-identical: the A5 provides approximately 4 samples per second, while the other suffix codes select different conversion rates. Confirm electrical limits, gain settings, timing, and application accuracy in the manufacturer datasheet before approving a replacement.
What can replace MCP3422A5-E/MS?
MCP3422A6-E/MS, MCP3422A2-E/MS, MCP3422A1-E/MS, MCP3422A0-E/MS, and MCP3422A7T-E/MS are the closest available family alternatives for an 8-MSOP MCP3422 design. Their key engineering difference is the conversion-rate suffix, not the physical interface. Treat them as design-checked drop-in candidates rather than automatically equivalent devices because acquisition timing and noise behavior change between suffix options.
Is MCP3422A5-E/MS the same as MCP3422A5T-E/MS?
MCP3422A5-E/MS and MCP3422A5T-E/MS identify the same MCP3422A5 18-bit ADC family configuration, but the ordering suffix indicates a different packing or shipment option. The E/MS product is listed as 8-MSOP, while MCP3422A5T-E/MS appears as a separate listing. Check reel orientation, quantity, moisture-protection requirements, and BOM labeling before treating the two ordering codes as interchangeable manufacturing items.
Where can I buy MCP3422A5-E/MS online?
Use the Request a Quote form on this page to request MCP3422A5-E/MS pricing, stock confirmation, minimum order quantity, and current lead time. The manufacturer has the device listed as active, and the exact 8-MSOP ordering code has authorized distribution listings. A written quote is the appropriate route when current availability, allocation, and production-volume pricing must be confirmed for the assembled device.
What is the price of MCP3422A5-E/MS?
The current price for MCP3422A5-E/MS should be requested through the Request a Quote form on this page. The available listing identifies the exact MPN and package, but its unit price is a standalone figure rather than a quantity-break schedule. The platform therefore does not publish a static tier table. Submit the required quantity, reel packaging needs, and delivery destination with the quote request to receive an actionable commercial response.
What is the lead time and stock status for MCP3422A5-E/MS?
Current stock and lead time for MCP3422A5-E/MS should be confirmed through the Request a Quote form on this page. Microchip Technology lists the part as active, and distributor results show the exact device available, but those listings do not establish a production lead-time commitment. Include your required quantity, date code preference, and shipment destination so the quotation can reflect an accurate fulfillment plan.
Is MCP3422A5-E/MS in stock?
The MCP3422A5-E/MS is shown as available in current product listings and Microchip Technology identifies it as active. Nevertheless, the amount available for your shipment should be confirmed through the Request a Quote form on this page, especially for production quantities. This avoids treating a general listing indication as a guaranteed stock allocation and allows quantity, packaging, and delivery requirements to be checked together.
How should I design the PCB layout for MCP3422A5-E/MS?
Keep the analog input path short, isolate it from switching-node traces, and provide a quiet return path between the sensor ground and the converter ground. Place filtering and input-network components close to the relevant MCP3422A5-E/MS pins, and route the I2C connections away from high-current switching paths. The verified listing confirms the 8-MSOP format but does not provide a complete layout, so use the manufacturer datasheet for pin-specific placement and grounding guidance.
What is the best Microchip alternative for MCP3422A5-E/MS?
The best Microchip alternatives are the other MCP3422 suffix options in the same 8-MSOP family, particularly MCP3422A6-E/MS or MCP3422A2-E/MS when their conversion rates fit the application. MCP3422A6-E/MS favors a lower update rate, while MCP3422A2-E/MS favors faster acquisition. Verify the manufacturer datasheet for timing, noise, gain, and electrical limits before treating either as a direct replacement.

के लिए इंजीनियरिंग संदर्भ डेटा MCP3422A5-E/MS — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose MCP3422A5-E/MS when the design needs an 18-bit sigma-delta ADC with two analog inputs, I2C communication, an onboard reference, and approximately 4 samples per second acquisition. This profile suits temperature, pressure, chemical, environmental, and slow feedback measurements where fine numerical resolution matters more than rapid sampling. Choose MCP3422A6-E/MS when a slower family conversion-rate option is preferable, or MCP3422A2-E/MS when faster acquisition is required; both should be checked against conversion timing and noise. MCP3422A1-E/MS and MCP3422A0-E/MS remain same-family drop-in candidates for designs whose update requirements and accuracy targets differ. MCP3422A7T-E/MS is the relevant family option when an automotive designation is required. Because every candidate uses the 8-MSOP format, PCB placement can be retained, but the suffix-code change still requires electrical, timing, qualification, and packing review before approval.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद MCP3422A6-E/MS MCP3422A2-E/MS MCP3422A1-E/MS MCP3422A0-E/MS MCP3422A7T-E/MS
Package 8-MSOP 8-MSOP 8-MSOP 8-MSOP 8-MSOP 8-MSOP
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
ADC Resolution 18 bit 18 bit 18 bit 18 bit 18 bit 18 bit
Conversion Architecture Sigma-delta Sigma-delta Sigma-delta Sigma-delta Sigma-delta Sigma-delta
Digital Interface I2C I2C I2C I2C I2C I2C
Onboard Reference Yes Yes Yes Yes Yes Yes
Ordering/Packing Option E/MS E/MS E/MS E/MS E/MS T-E/MS
Number of Pins 8 pins 8 pins 8 pins 8 pins 8 pins 8 pins

मुख्य विशेषताएँ

  • Balanced resolution and acquisition rate for slow-changing measurements (बनामMCP3422A2-E/MS)
  • Two analog inputs in a compact converter (बनामMCP3422A0-E/MS)
  • Integrated I2C communication and onboard reference (बनामMCP3422A7T-E/MS)

डिज़ाइन नोट्स

Route the analog input nets directly to the converter and keep them away from I2C clock traces, switching inductors, and relay return paths. Use a continuous analog-ground reference beneath the measurement section and connect it according to the manufacturer grounding guidance. The MCP3422A5-E/MS resolves low-level signals, so small ground offsets or common-mode pickup can materially affect the useful measurement result even when the nominal resolution is 18 bit.

Place input filtering components near the MCP3422A5-E/MS pins and calculate their values from the sensor impedance, permitted settling time, and the approximately 4 samples per second acquisition rate. A differential input arrangement can improve rejection of common-mode noise, but both input pins must be driven within their allowed common-mode range. Confirm gain, input voltage range, source impedance, and digital filter behavior in the manufacturer datasheet before selecting the final network.

Do not treat the 18-bit nominal resolution as guaranteed system accuracy. Onboard-reference tolerance, analog noise, PCB leakage, sensor excitation variation, and filtering all contribute to the final error budget. Establish the required uncertainty before choosing gain and averaging settings, then verify the complete measurement chain. The family’s different suffix codes also change conversion timing, so replacing an A5 device with another rate option requires a fresh timing and noise review.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations are not stated in the verified product data. AEC-Q100 is recorded as not applicable for the standard MCP3422A5-E/MS; the automotive-oriented family suffix requires separate qualification review.

डेटा सत्यापन तिथि: 2026-11-20 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

MCP3422A5-E/MS datasheet MCP3422A5-E/MS pinout MCP3422A5-E/MS datasheet pdf MCP3422A5-E/MS specifications MCP3422A5-E/MS price MCP3422A5-E/MS equivalent MCP3422A5-E/MS replacement MCP3422A5-E/MS cross reference MCP3422A5-E/MS vs MCP3422A2-E/MS MCP3422A5-E/MS 8-MSOP Microchip MCP3422A5-E/MS MCP3422A5-E/MS sensor measurement

संबंधित कंपोनेंट्स और शब्द

Microchip Technology MCP3422A5-E/MS MCP3422A6-E/MS MCP3422A2-E/MS MCP3422A1-E/MS MCP3422A0-E/MS MCP3422A7T-E/MS MCP3422A5T-E/MS analog-to-digital converter ADC delta-sigma ADC sigma-delta converter I2C interface onboard voltage reference 18-bit resolution 8-MSOP MSOP family surface-mount package industrial process monitoring environmental sensing laboratory instrumentation automotive sensor interface precision control feedback
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें