MCP3422A5-E/MS - 18-Bit I2C ADC | Microchip Technology
MPN: MCP3422A5-E/MS ✓ 啟用中MCP3422A5-E/MS 概覽
An ADC is a data-conversion IC that transforms an analog voltage into a numeric value for processing, measurement, logging, or control. The MCP3422 belongs to the broader ADC hierarchy and specifically uses a delta-sigma conversion architecture. Its differential or single-ended input architecture, onboard voltage reference, and serial I2C interface reduce the number of external signal-conditioning and communications components required in compact embedded designs.
The principal feature of the MCP3422A5-E/MS is its 18-bit resolution. Resolution determines the number of discrete codes available across the converter range, making the device suitable for sensors that produce small voltage changes. Its 8-pin MSOP construction supports compact PCB layouts, while the I2C interface allows the converter to share a two-wire bus with a microcontroller or other compatible peripherals.
The delta-sigma architecture emphasizes resolution and noise performance for low-frequency signals rather than high-speed waveform capture. The approximately 4 samples per second operating rate shown in the product listing makes repeated readings practical for temperature, pressure, chemical, and other slowly changing sensor measurements. Designers should use the manufacturer pin-description table when assigning analog inputs, reference connections, ground returns, and I2C signals to PCB tracks.
Typical uses include industrial process monitoring, environmental sensing, laboratory instrumentation, and portable equipment that records slowly varying analog quantities. Differential measurement can help reject common-mode noise when the sensor is referenced to a remote or noisy ground. Single-channel operation is also useful where one transducer must be measured with minimum analog front-end complexity.
The main design consideration is digital-noise coupling. Place the analog input traces away from switching nodes and route a quiet ground return beneath or alongside the measurement path. Confirm the selected conversion rate, input range, reference behavior, and capacitor requirements in the manufacturer datasheet before finalizing filtering, gain, and sampling timing.
This page consolidates the verified product identity, package information, sourcing path, family drop-in options, and practical ADC design guidance. It also organizes the selection trade-offs among MCP3422 conversion-rate variants and separates verified product facts from parameters that require an engineering review.
直接替換替代品,適用於 MCP3422A5-E/MS — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: MCP3422A5-E/MS (相同外形與佔位) — 差異在於 Resolution, Differential Input Range, Digital Interface, Input Architecture, Package.
MCP3422A6-E/MS
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →MCP3422A2-E/MS
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →MCP3422A1-E/MS
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →MCP3422A0-E/MS
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →MCP3422A7T-E/MS
✅ 直接替換📋 參考替代品(不在目錄中)
MCP3422A5-E/MS 最大額定值與電氣特性
| Converter Type | 1 sigma-delta ADC |
| 解析度 | 18 bit |
| Input Architecture | 2 analog inputs |
| Conversion Rate | Approximately 4 samples per second |
| Digital Interface | I2C |
| Internal Reference | On-board voltage reference |
| 封裝 | 8-MSOP |
| Package Pin Count | 8 pins |
| Package Width | 3.00 mm |
| Package Length | 0.118 inch |
| 安裝類型 | Surface mount |
| Product Type | Multichannel 18-bit delta-sigma ADC |
| Signal Interface | 2-wire serial I2C |
| 生命週期狀態 | Active |
MCP3422A5-E/MS 0.118 inch 腳位配置指南
MCP3422A5-E/MS(0.118 inch 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: MCP3422A5-E/MS.
請參閱 資料表 以查看完整腳位配置。
典型應用
MCP3422A5-E/MS 適用於 6 應用s: Industrial Process Monitoring, Environmental Sensor Acquisition, Laboratory Measurement Instrumentation, Battery-Powered Portable Instruments, Automotive Sensor Interface, Precision Control Feedback.
Industrial Process Monitoring
The MCP3422A5-E/MS fits industrial process monitoring where a pressure, level, or chemical sensor changes more slowly than the approximately 4 samples per second acquisition rate. Its 18-bit conversion resolution preserves fine measurement detail, while two analog inputs support a compact multi-sensor arrangement. Place the converter behind the transmitter or sensor front end, use the I2C interface to transfer results to a controller, and isolate analog traces from motor and relay switching paths. Differential input wiring can reduce common-mode disturbance when the sensor ground is not perfectly quiet, although gain, input range, and filtering must be confirmed in the manufacturer datasheet.
推薦
Environmental Sensor Acquisition
The MCP3422A5-E/MS is appropriate for temperature, humidity, gas, and light sensors whose analog output evolves gradually. An 18-bit ADC provides a high nominal code count, allowing small sensor-voltage changes to be represented more finely than with a lower-resolution converter. The two-input arrangement can monitor a sensing element and a reference or auxiliary channel when the manufacturer configuration permits it. Use local filtering to suppress broadband noise, maintain a low-impedance source at the converter inputs, and read the I2C results on a schedule matched to the sensor’s physical response time rather than the converter’s maximum conversion capability.
推薦
Laboratory Measurement Instrumentation
The MCP3422A5-E/MS can serve as the analog measurement front end in a compact laboratory instrument when the input changes slowly enough for approximately 4 samples per second operation. Its 18-bit resolution, I2C interface, and onboard reference reduce the number of separate digital-interface and reference components required around the converter. For bench measurements, decouple the supply close to the device, keep the analog return path short, and establish the input gain before the converter range. Verify the selected gain mode, offset behavior, conversion timing, and source-impedance limits in the manufacturer datasheet, since those parameters determine whether additional buffering or filtering is required.
推薦
Battery-Powered Portable Instruments
The MCP3422A5-E/MS supports compact, battery-powered measurement products that periodically sample a sensor rather than continuously capture a waveform. Two analog inputs can reduce the number of separate converters needed in a multichannel instrument, and the I2C bus permits shared communication with a low-power controller. The exact operating current and voltage range are not stated in the verified product summary, so battery sizing must use the manufacturer electrical characteristics rather than assumptions. Confirm sleep or conversion strategy, logic-level compatibility, and reference behavior to preserve the intended measurement accuracy between updates.
推薦
Automotive Sensor Interface
MCP3422A7T-E/MS is the automotive-oriented option within the MCP3422 family, while the MCP3422A5-E/MS provides the approximately 4 samples per second conversion profile. Both use the 8-MSOP format and 18-bit ADC architecture, making the family useful for slow-changing vehicle sensors when the exact qualification and electrical requirements match the system. An automotive design must verify the selected suffix’s qualification, temperature range, supply limits, and EMC requirements in the manufacturer documentation. Do not use the standard A5 device for an automotive requirement unless the specific ordering code is explicitly listed for that grade.
推薦
Precision Control Feedback
The MCP3422A5-E/MS can close a slow control loop by measuring an analog feedback voltage and delivering the result through I2C to a controller. Its 18-bit nominal resolution is useful when the control action depends on small error signals rather than only the absolute process value. Keep the feedback trace short, use a dedicated analog ground return, and place any input filter close to the device to minimize pickup. Because the MCP3422A5 conversion rate is approximately 4 samples per second, confirm that this update interval satisfies the control dynamics. If the process changes faster, select another MCP3422 rate suffix and revalidate loop stability and acquisition latency.
推薦
推薦產品摘要
工程參考資料,適用於 MCP3422A5-E/MS — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MCP3422A6-E/MS | MCP3422A2-E/MS | MCP3422A1-E/MS | MCP3422A0-E/MS | MCP3422A7T-E/MS |
|---|---|---|---|---|---|---|
| Package | 8-MSOP | 8-MSOP | 8-MSOP | 8-MSOP | 8-MSOP | 8-MSOP |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| ADC Resolution | 18 bit | 18 bit | 18 bit | 18 bit | 18 bit | 18 bit |
| Conversion Architecture | Sigma-delta | Sigma-delta | Sigma-delta | Sigma-delta | Sigma-delta | Sigma-delta |
| Digital Interface | I2C | I2C | I2C | I2C | I2C | I2C |
| Onboard Reference | Yes | Yes | Yes | Yes | Yes | Yes |
| Ordering/Packing Option | E/MS | E/MS | E/MS | E/MS | E/MS | T-E/MS |
| Number of Pins | 8 pins | 8 pins | 8 pins | 8 pins | 8 pins | 8 pins |
主要差異化特點
- Balanced resolution and acquisition rate for slow-changing measurements (對比MCP3422A2-E/MS)
- Two analog inputs in a compact converter (對比MCP3422A0-E/MS)
- Integrated I2C communication and onboard reference (對比MCP3422A7T-E/MS)
設計說明
Route the analog input nets directly to the converter and keep them away from I2C clock traces, switching inductors, and relay return paths. Use a continuous analog-ground reference beneath the measurement section and connect it according to the manufacturer grounding guidance. The MCP3422A5-E/MS resolves low-level signals, so small ground offsets or common-mode pickup can materially affect the useful measurement result even when the nominal resolution is 18 bit.
Place input filtering components near the MCP3422A5-E/MS pins and calculate their values from the sensor impedance, permitted settling time, and the approximately 4 samples per second acquisition rate. A differential input arrangement can improve rejection of common-mode noise, but both input pins must be driven within their allowed common-mode range. Confirm gain, input voltage range, source impedance, and digital filter behavior in the manufacturer datasheet before selecting the final network.
Do not treat the 18-bit nominal resolution as guaranteed system accuracy. Onboard-reference tolerance, analog noise, PCB leakage, sensor excitation variation, and filtering all contribute to the final error budget. Establish the required uncertainty before choosing gain and averaging settings, then verify the complete measurement chain. The family’s different suffix codes also change conversion timing, so replacing an A5 device with another rate option requires a fresh timing and noise review.
合規資訊
RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations are not stated in the verified product data. AEC-Q100 is recorded as not applicable for the standard MCP3422A5-E/MS; the automotive-oriented family suffix requires separate qualification review.