MCP3426A7-E/MS - 16-Bit Dual-Channel ADC | Microchip
MPN: MCP3426A7-E/MS ✓ सक्रियMCP3426A7-E/MS अवलोकन
A delta-sigma ADC is an analog-to-digital converter category that uses oversampling and digital filtering to trade conversion speed for high resolution and noise performance. The MCP3426 belongs to the ADC and DAC hierarchy within integrated circuits, where it converts continuously varying analog voltages into digital values for measurement, control, monitoring, and data-acquisition systems.
The principal features of the MCP3426A7-E/MS include 16-bit resolution, two differential input channels, a 15 SPS conversion rate, and a 2.048 V onboard reference. Its differential input architecture supports common-mode rejection, while the 2.7 V to 5.5 V supply range accommodates both 3.3 V and 5 V systems. The I2C interface reduces the number of connections required for communicating conversion results with a host controller.
Technically, the converter combines a delta-sigma modulator with internal digital filtering to suppress high-frequency noise and achieve fine resolution. The internal reference establishes a differential input range of ±2.048 V when the reference is used. Conversion speed is intentionally modest at 15 SPS, allowing the device to focus on accuracy and noise rejection rather than high-bandwidth acquisition.
Typical uses include industrial process monitoring, sensor instrumentation, battery-operated measurement instruments, environmental logging, laboratory data acquisition, and low-frequency pressure or temperature sensing. The dual-channel configuration allows two related analog quantities to be measured while retaining a compact 8-pin footprint.
Designers should place input and reference components close to the device, keep analog traces away from switching-node and digital clock paths, and verify the input voltage against the selected gain and reference configuration. The 15 SPS conversion rate must also be considered when designing closed-loop controls or sampling waveforms that contain significant high-frequency content.
This product page combines the manufacturer’s device description, distributor specifications, package information, application guidance, and a clearly qualified drop-in comparison. It also identifies the measurement, interface, layout, and performance constraints that determine whether this low-speed precision ADC fits a particular sensor or control design.
के लिए ड्रॉप-इन विकल्प MCP3426A7-E/MS — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
MCP3426A7T-E/MS
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
MCP3426A7-E/MS Maximum Ratings और Electrical Characteristics
| रेज़ोल्यूशन | 16 bit |
| Analog Input Channels | 2 channels |
| Input Architecture | Differential inputs |
| Conversion Technology | 1-channel-per-input delta-sigma architecture |
| Maximum Conversion Rate | 15 samples per second |
| Supply Voltage Range | 2.7 V to 5.5 V |
| Nominal Supply Voltage | 3.3 V or 5 V |
| Onboard Reference Voltage | 2.048 V |
| Differential Input Range | ±2.048 V |
| Digital Interface | I2C |
| ऑपरेटिंग तापमान रेंज | -40 °C to +125 °C |
| पैकेज | 8-pin MSOP |
| माउंटिंग प्रकार | Surface mount |
| RoHS स्थिति | Compliant |
MCP3426A7-E/MS 8-pin msop पिन कॉन्फ़िगरेशन गाइड
MCP3426A7-E/MS (8-pin msop पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: MCP3426A7-E/MS.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
MCP3426A7-E/MS के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Temperature Sensing, Pressure Transducer Acquisition, Battery Monitoring and Portable Instruments, Environmental Monitoring, Laboratory Data Acquisition, Process Control and Monitoring.
Industrial Temperature Sensing
The MCP3426A7-E/MS fits industrial temperature measurement because it combines 16-bit resolution with two differential input channels and a 15 SPS conversion rate. One channel can monitor a precision thermistor or RTD bridge while the other tracks a reference or compensation signal. According to the Microchip MCP3426 datasheet, differential operation improves rejection of common-mode disturbance, while the onboard 2.048 V reference supports a defined ±2.048 V measurement range. Design the bridge and front-end network to keep both differential inputs within the selected gain’s permitted range, and allow time between conversions when calculating control-loop update rates.
अनुशंसित
Pressure Transducer Acquisition
The MCP3426A7-E/MS is appropriate for low-speed pressure transducer acquisition where differential excitation and measurement improve signal integrity. Its 16-bit delta-sigma converter can resolve small bridge outputs, and the dual-channel architecture can acquire the sensor signal alongside a temperature, supply, or calibration reference. According to the Microchip manufacturer product page, the converter supports differential inputs and an onboard 2.048 V reference. Use an instrumentation-amplifier or application-specific front end when transducer excitation and common-mode voltage exceed the ADC input limits, and verify the 15 SPS update rate against the pressure dynamics of the mechanical system.
अनुशंसित
Battery Monitoring and Portable Instruments
The MCP3426A7-E/MS suits portable battery-powered instruments because its 2.7 V to 5.5 V supply range accommodates 3.3 V and 5 V systems, while the 15 SPS rate matches slowly varying battery and current measurements. The 16-bit resolution provides ample code density for monitoring pack voltage, load current, and a second analog quantity through differential inputs. According to the Microchip MCP3426 datasheet, the converter supports an I2C host interface and an onboard 2.048 V reference. Account for reference and front-end offsets during calibration, and disable or reduce conversion activity when longer battery life is more important than continuous measurements.
अनुशंसित
Environmental Monitoring
The MCP3426A7-E/MS can digitize slow environmental signals such as humidity, carbon dioxide, soil moisture, or light levels when the sensor outputs are conditioned to the ADC input range. Two differential channels allow simultaneous measurement of an active sensor and a reference channel used for drift compensation. According to the Microchip MCP3426 product page, the device provides 16-bit resolution, differential inputs, and an onboard 2.048 V reference. Its 15 SPS conversion rate is appropriate for environmental trends rather than rapid transients, while the I2C interface supports connection to a low-power monitoring controller. Protect external inputs from moisture and electrostatic discharge according to the enclosure and circuit requirements.
अनुशंसित
Laboratory Data Acquisition
The MCP3426A7-E/MS provides useful precision in a laboratory measurement front end when signals change slowly and high resolution matters more than high throughput. The two differential channels can acquire a conditioned transducer output and a calibration or diagnostic input, while 16-bit resolution reduces quantization error in the recorded results. According to the Microchip MCP3426 datasheet, operation from 2.7 V to 5.5 V and communication through I2C simplify integration with laboratory controllers. Keep analog input traces short and away from digital and switching signals, and use a low-noise reference strategy when absolute measurement uncertainty must be controlled across multiple temperature conditions.
अनुशंसित
Process Control and Monitoring
The MCP3426A7-E/MS can monitor slow process variables such as tank level, flow proxies, heater resistance, and supply rails in industrial control systems. Differential inputs help reject shared ground and common-mode disturbances when the sensors are connected through a balanced interface, while the two-channel capability supports a measurement plus reference arrangement. According to the Microchip MCP3426 datasheet, the converter achieves 16-bit resolution at up to 15 SPS and uses I2C for controller communication. Confirm that the process control loop can operate at this update rate, and design input protection and filtering to withstand industrial transients without degrading measurement accuracy.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा MCP3426A7-E/MS — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | MCP3426A7T-E/MS |
|---|---|---|
| Package | 8-pin MSOP | 8-pin MSOP |
| Brand | Microchip Technology | Microchip Technology |
| ADC Resolution | 16 bit | 16 bit |
| Analog Input Channels | 2 channels | 2 channels |
| Conversion Rate | 15 samples per second | 15 samples per second |
| Supply Voltage Range | 2.7 V to 5.5 V | 2.7 V to 5.5 V |
| Digital Interface | I2C | I2C |
| Conversion Technology | Delta-sigma | Delta-sigma |
| Input Configuration | Differential inputs | Differential inputs |
| Onboard Reference | 2.048 V | 2.048 V |
मुख्य विशेषताएँ
- High resolution combined with a slow conversion rate (बनामMCP3426A7T-E/MS)
- Two differential channels in an 8-pin MSOP (बनामMCP3426A7T-E/MS)
- Integrated 2.048 V reference (बनामMCP3426A7T-E/MS)
डिज़ाइन नोट्स
Route the two differential input channels as short, closely matched pairs and keep them away from I2C clock traces, switching nodes, and high-current return paths. Place input filtering and protection components near the ADC pins rather than near the sensors, where long analog traces could increase susceptibility to coupling. Provide a quiet ground return for the analog section and use the package and datasheet pin assignments when defining the PCB footprint.
Decouple the 2.7 V to 5.5 V supply close to the device with the capacitance and ESR requirements stated in the manufacturer datasheet. Keep analog and digital return currents separated as far as the board construction permits, and avoid sharing a narrow return segment with switching converters or relay drivers. Confirm that supply ripple and noise remain within the ADC’s allowable limits because they can otherwise degrade conversion accuracy and apparent resolution.
Do not treat a 16-bit resolution figure as guaranteed end-to-end accuracy. Overall error also includes reference error, gain error, offset, input noise, front-end errors, and quantization. Check whether the measurement signal can remain within the input limits for the selected gain and reference, and confirm that the 15 SPS conversion rate satisfies the application’s timing. The -40 °C to +125 °C operating range also requires component-level thermal verification in the final assembly.
Use anti-alias filtering tailored to the 15 SPS conversion rate so that out-of-band noise is attenuated before reaching the delta-sigma modulator. For slowly varying sensors, a modest RC network may be adequate, but resistance and capacitor selection must preserve differential channel matching and settle after each conversion. Verify the complete input path with the intended source impedance because long sensor wiring can introduce leakage, pickup, and unbalanced filtering.
अनुपालन जानकारी
RoHS compliance is identified by the component listing. REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer or current material declaration.