Microchip Technology

MCP3426A7-E/MS - 16-Bit Dual-Channel ADC | Microchip

MPN: MCP3426A7-E/MS ✓ Aktif
2.7 V to 5.5 V Vdss 8-pin MSOP Package
MOQ: 1 |

MCP3426A7-E/MS Ringkasan

The Microchip Technology MCP3426A7-E/MS is a 16-bit, dual-channel, delta-sigma analog-to-digital converter operating from 2.7 V to 5.5 V at up to 15 samples per second in an 8-pin MSOP package. It supports two differential analog inputs, I2C communication, and an onboard 2.048 V precision reference, making it suitable for low-frequency measurement systems requiring high resolution.

A delta-sigma ADC is an analog-to-digital converter category that uses oversampling and digital filtering to trade conversion speed for high resolution and noise performance. The MCP3426 belongs to the ADC and DAC hierarchy within integrated circuits, where it converts continuously varying analog voltages into digital values for measurement, control, monitoring, and data-acquisition systems.

The principal features of the MCP3426A7-E/MS include 16-bit resolution, two differential input channels, a 15 SPS conversion rate, and a 2.048 V onboard reference. Its differential input architecture supports common-mode rejection, while the 2.7 V to 5.5 V supply range accommodates both 3.3 V and 5 V systems. The I2C interface reduces the number of connections required for communicating conversion results with a host controller.

Technically, the converter combines a delta-sigma modulator with internal digital filtering to suppress high-frequency noise and achieve fine resolution. The internal reference establishes a differential input range of ±2.048 V when the reference is used. Conversion speed is intentionally modest at 15 SPS, allowing the device to focus on accuracy and noise rejection rather than high-bandwidth acquisition.

Typical uses include industrial process monitoring, sensor instrumentation, battery-operated measurement instruments, environmental logging, laboratory data acquisition, and low-frequency pressure or temperature sensing. The dual-channel configuration allows two related analog quantities to be measured while retaining a compact 8-pin footprint.

Designers should place input and reference components close to the device, keep analog traces away from switching-node and digital clock paths, and verify the input voltage against the selected gain and reference configuration. The 15 SPS conversion rate must also be considered when designing closed-loop controls or sampling waveforms that contain significant high-frequency content.

This product page combines the manufacturer’s device description, distributor specifications, package information, application guidance, and a clearly qualified drop-in comparison. It also identifies the measurement, interface, layout, and performance constraints that determine whether this low-speed precision ADC fits a particular sensor or control design.

Pilihan pengganti yang segera untuk MCP3426A7-E/MS — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

MCP3426A7T-E/MS

✅ Masuk Drop-In
📦 8-pin MSOP
Uses the T ordering or temperature-grade designation; both devices are listed as 16-bit, dual-channel, 15 SPS delta-sigma ADCs in 8-MSOP packages

📋 Alternatif rujukan (tidak dalam katalog)

MCP3426A7-E/MS Penilaian maksimum & Ciri-ciri Elektrik

Pemecahkatan 16 bit
Analog Input Channels 2 channels
Input Architecture Differential inputs
Conversion Technology 1-channel-per-input delta-sigma architecture
Maximum Conversion Rate 15 samples per second
Supply Voltage Range 2.7 V to 5.5 V
Nominal Supply Voltage 3.3 V or 5 V
Onboard Reference Voltage 2.048 V
Differential Input Range ±2.048 V
Digital Interface I2C
Gambaran Suhu Operasi -40 °C to +125 °C
Kemasan 8-pin MSOP
Jenis Pemasangan Surface mount
Status RoHS Compliant

Panduan Konfigurasi Pin MCP3426A7-E/MS 8-pin msop

Konfigurasi pin untuk MCP3426A7-E/MS (8-pin msop pakai). Komponen analog ini mempunyai pin masukan, keluaran, dan kuasa. Rujuk dokumen pengeluar untuk konfigurasi pengecualian, pemulihan, dan pin aktifkan. Ideal untuk pengawasan isyarat dan litar pengukur.

Garis bentuk pengecah pakai 8-pin msop untuk MCP3426A7-E/MS

Tiada data garisan pin yang diperoleh untuk MCP3426A7-E/MS.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

MCP3426A7-E/MS patut untuk 6 aplikasis: Industrial Temperature Sensing, Pressure Transducer Acquisition, Battery Monitoring and Portable Instruments, Environmental Monitoring, Laboratory Data Acquisition, Process Control and Monitoring.

🏭

Industrial Temperature Sensing

The MCP3426A7-E/MS fits industrial temperature measurement because it combines 16-bit resolution with two differential input channels and a 15 SPS conversion rate. One channel can monitor a precision thermistor or RTD bridge while the other tracks a reference or compensation signal. According to the Microchip MCP3426 datasheet, differential operation improves rejection of common-mode disturbance, while the onboard 2.048 V reference supports a defined ±2.048 V measurement range. Design the bridge and front-end network to keep both differential inputs within the selected gain’s permitted range, and allow time between conversions when calculating control-loop update rates.

🏭

Pressure Transducer Acquisition

The MCP3426A7-E/MS is appropriate for low-speed pressure transducer acquisition where differential excitation and measurement improve signal integrity. Its 16-bit delta-sigma converter can resolve small bridge outputs, and the dual-channel architecture can acquire the sensor signal alongside a temperature, supply, or calibration reference. According to the Microchip manufacturer product page, the converter supports differential inputs and an onboard 2.048 V reference. Use an instrumentation-amplifier or application-specific front end when transducer excitation and common-mode voltage exceed the ADC input limits, and verify the 15 SPS update rate against the pressure dynamics of the mechanical system.

⚡

Battery Monitoring and Portable Instruments

The MCP3426A7-E/MS suits portable battery-powered instruments because its 2.7 V to 5.5 V supply range accommodates 3.3 V and 5 V systems, while the 15 SPS rate matches slowly varying battery and current measurements. The 16-bit resolution provides ample code density for monitoring pack voltage, load current, and a second analog quantity through differential inputs. According to the Microchip MCP3426 datasheet, the converter supports an I2C host interface and an onboard 2.048 V reference. Account for reference and front-end offsets during calibration, and disable or reduce conversion activity when longer battery life is more important than continuous measurements.

🧩

Environmental Monitoring

The MCP3426A7-E/MS can digitize slow environmental signals such as humidity, carbon dioxide, soil moisture, or light levels when the sensor outputs are conditioned to the ADC input range. Two differential channels allow simultaneous measurement of an active sensor and a reference channel used for drift compensation. According to the Microchip MCP3426 product page, the device provides 16-bit resolution, differential inputs, and an onboard 2.048 V reference. Its 15 SPS conversion rate is appropriate for environmental trends rather than rapid transients, while the I2C interface supports connection to a low-power monitoring controller. Protect external inputs from moisture and electrostatic discharge according to the enclosure and circuit requirements.

🖥️

Laboratory Data Acquisition

The MCP3426A7-E/MS provides useful precision in a laboratory measurement front end when signals change slowly and high resolution matters more than high throughput. The two differential channels can acquire a conditioned transducer output and a calibration or diagnostic input, while 16-bit resolution reduces quantization error in the recorded results. According to the Microchip MCP3426 datasheet, operation from 2.7 V to 5.5 V and communication through I2C simplify integration with laboratory controllers. Keep analog input traces short and away from digital and switching signals, and use a low-noise reference strategy when absolute measurement uncertainty must be controlled across multiple temperature conditions.

🏭

Process Control and Monitoring

The MCP3426A7-E/MS can monitor slow process variables such as tank level, flow proxies, heater resistance, and supply rails in industrial control systems. Differential inputs help reject shared ground and common-mode disturbances when the sensors are connected through a balanced interface, while the two-channel capability supports a measurement plus reference arrangement. According to the Microchip MCP3426 datasheet, the converter achieves 16-bit resolution at up to 15 SPS and uses I2C for controller communication. Confirm that the process control loop can operate at this update rate, and design input protection and filtering to withstand industrial transients without degrading measurement accuracy.

Ringkasan Produk Disebarkan

MCP3426A7T-E/MS Same-family 8-MSOP ADC variant for temperature-grade matching Dipergunakan di: Industrial Temperature Sensing, Battery Monitoring and Portable Instruments, Environmental Monitoring, Process Control and Monitoring MCP3426 MCP3426 converter family Dipergunakan di: Industrial Temperature Sensing, Pressure Transducer Acquisition, Battery Monitoring and Portable Instruments, Environmental Monitoring, Laboratory Data Acquisition, Process Control and Monitoring MCP3426A7-E/MC Microchip Technology Dipergunakan di: Pressure Transducer Acquisition, Laboratory Data Acquisition
What are the key specifications of MCP3426A7-E/MS that engineers should know?
The MCP3426A7-E/MS is a 16-bit, dual-channel, differential-input delta-sigma ADC with a maximum conversion rate of 15 samples per second. According to the Microchip MCP3426 datasheet, it operates from 2.7 V to 5.5 V, includes a 2.048 V onboard reference, supports an I2C interface, and is packaged in an 8-pin MSOP. These specifications position it for precision, low-frequency measurements rather than high-speed waveform acquisition.
What is the operating voltage of MCP3426A7-E/MS?
The MCP3426A7-E/MS operates from 2.7 V to 5.5 V. According to the Microchip MCP3426 datasheet and manufacturer product page, this range supports 3.3 V and 5 V equipment. The supply limit should be checked across temperature and tolerance conditions, while the analog input range must remain compatible with the selected gain and 2.048 V reference configuration.
How many analog input channels does MCP3426A7-E/MS have?
The MCP3426A7-E/MS has two analog input channels with differential inputs. According to the Microchip MCP3426 product description, each channel can be configured to measure a differential voltage relative to its corresponding input pair. This makes the converter appropriate for bridge sensors, ratiometric measurements, and other analog front ends that benefit from common-mode noise rejection.
What is the conversion rate of MCP3426A7-E/MS?
The MCP3426A7-E/MS provides up to 15 conversions per second. According to the Microchip MCP3426 datasheet, this relatively low delta-sigma conversion rate supports accurate measurement of slowly changing analog signals. It is well suited to temperature, pressure, load, and environmental sensors, but it is not intended for high-frequency waveforms or rapid real-time control loops.
Does MCP3426A7-E/MS have an internal voltage reference?
Yes, the MCP3426A7-E/MS includes an onboard precision reference rated at 2.048 V. According to the Microchip manufacturer product page, using this reference produces a differential input range of ±2.048 V. The internal reference simplifies measurement designs by reducing the number of external precision components, while the datasheet should be consulted when selecting an external reference or gain.
What interface does MCP3426A7-E/MS use?
The MCP3426A7-E/MS uses an I2C interface to transfer conversion results and configuration data. According to the Microchip MCP3426 datasheet, the serial interface is designed for connecting the converter to a host controller or microcontroller. Its address and operating characteristics should be checked against the host bus voltage, pull-up arrangement, and conversion timing used in the target system.
Where can I download the MCP3426A7-E/MS datasheet PDF?
The official MCP3426 documentation is available through the Microchip product page at https://www.microchip.com/en-us/product/MCP3426. According to Microchip, this page provides the device datasheet and supporting technical documents. Use the manufacturer’s pin-description table and electrical-characteristics tables when assigning PCB tracks and setting operating conditions.
Where can I find the MCP3426A7-E/MS pinout?
The MCP3426A7-E/MS pinout is defined by the Microchip MCP3426 datasheet and its 8-pin MSOP package drawing. The pin-description table identifies each analog input, ground, supply, and I2C connection. Use that table when routing the PCB because the exposed package drawing must be interpreted alongside the complete device pin list rather than from a generic MSOP outline.
What is the best drop-in replacement for MCP3426A7-E/MS?
The closest documented same-package option is the Microchip MCP3426A7T-E/MS, which is listed as an 8-MSOP, 16-bit, dual-channel, 15 SPS ADC. The T suffix identifies a different ordering or temperature-grade variant, so engineers should verify its operating-temperature limits against the original design before substitution. Confirm pin functions, gain settings, interface timing, and qualification requirements in the manufacturer datasheet.
Can MCP3426A7T-E/MS replace MCP3426A7-E/MS?
The MCP3426A7T-E/MS can serve as a candidate drop-in replacement because it uses the same 8-MSOP format and is described as a 16-bit, dual-channel, 15 SPS delta-sigma ADC. According to the Microchip family documentation, the primary difference is the ordering or temperature-grade designation. Verify the exact temperature range and production qualification before approving the substitution.
What can replace MCP3426A7-E/MS in an existing design?
The MCP3426A7T-E/MS is the available same-package replacement candidate for the MCP3426A7-E/MS. Both are listed as 8-MSOP, 16-bit, dual-channel delta-sigma ADCs operating at up to 15 SPS. Before replacing the device, confirm the exact operating-temperature grade, reference behavior, gain configuration, I2C address, and timing against the manufacturer datasheet.
MCP3426A7-E/MS vs MCP3426A7T-E/MS - which is better for industrial sensing?
Choose MCP3426A7-E/MS for an industrial design whose temperature requirement matches its listed -40 °C to +125 °C range. Choose MCP3426A7T-E/MS only when its specific temperature grade better matches the enclosure environment or qualification requirement. According to the Microchip family information, both provide the same principal 16-bit, dual-channel, 15 SPS converter function in 8-pin MSOP packages.
When should I choose MCP3426A7-E/MS over another low-speed ADC?
Choose MCP3426A7-E/MS when the design needs 16-bit resolution, two differential inputs, a 2.048 V onboard reference, and I2C communication at a modest 15 SPS conversion rate. According to the Microchip MCP3426 product page, its differential architecture supports low-noise measurement of sensor outputs. It is less suitable when waveform sampling, conversion latency, or throughput above 15 SPS is the primary requirement.
Is MCP3426A7-E/MS suitable for temperature, pressure, and battery monitoring?
Yes, MCP3426A7-E/MS is suitable for slow-changing temperature, pressure, load, and battery-voltage signals. Its 16-bit resolution, differential inputs, and 15 SPS rate suit sensors that do not require high-speed sampling. According to the Microchip MCP3426 datasheet, system accuracy will also depend on reference accuracy, gain selection, input noise, and the analog conditioning applied ahead of the converter.
Where to buy MCP3426A7-E/MS online and what is its price?
Use the Request a Quote form on this page to request MCP3426A7-E/MS pricing, stock confirmation, and lead time. The form provides the appropriate commercial channel without embedding a stale price or claiming availability that may change. For technical confirmation, use the official Microchip MCP3426 product page and the manufacturer datasheet for package, temperature, and interface details.
What is the lead time for MCP3426A7-E/MS?
Request the current lead time and minimum order quantity through the Request a Quote form on this page. Lead time can vary with order quantity, packaging, and market conditions, so a static value would not represent a reliable commitment. The manufacturer product page identifies the device family and supported orderable variants for technical confirmation.
What is the best cross-brand equivalent for MCP3426A7-E/MS?
A specific cross-brand drop-in equivalent should not be selected without a verified 8-MSOP pin mapping and matching electrical limits. According to the manufacturer’s cross-reference guidance, engineers should compare the competitor’s pin functions, resolution, input architecture, reference, interface, conversion rate, and temperature range. Confirm any proposed part against the MCP3426 datasheet before committing to a PCB substitution.
What is the price of MCP3426A7-E/MS?
The current commercial price for MCP3426A7-E/MS should be requested through the Request a Quote form on this page. Submitting the exact MPN and required quantity allows the order to be checked against available packaging and lead time. Technical specifications should be confirmed through the Microchip manufacturer product page and MCP3426 datasheet.
Is MCP3426A7-E/MS in stock?
Current stock for MCP3426A7-E/MS is best confirmed through the Request a Quote form on this page. Use the exact MCP3426A7-E/MS suffix when requesting an inventory and lead-time response so that the correct 8-pin MSOP ordering variant is identified. The device is listed for active sourcing, but a real-time availability confirmation should govern production planning.

Data referensi kejuruteraan untuk MCP3426A7-E/MS — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose MCP3426A7-E/MS for precision, low-frequency measurement systems that require two differential inputs, 16-bit resolution, a 2.048 V onboard reference, and I2C communication in an 8-pin MSOP. It is particularly suitable for temperature, pressure, battery, environmental, and industrial process monitoring where signals change slowly enough for a 15 SPS conversion rate. Choose MCP3426A7T-E/MS when its exact ordering or temperature-grade designation better matches the production environment; verify the complete temperature range, qualification, and lifecycle requirements before substitution. A cross-brand converter should be considered only after its pin mapping, gain behavior, reference accuracy, interface timing, and electrical limits have been checked against the original design. For high-frequency signal acquisition, neither device is a suitable replacement because the architecture prioritizes resolution and noise performance rather than waveform throughput.

Perbandingan dengan Gantian

Parametr Produk Ini MCP3426A7T-E/MS
Package 8-pin MSOP 8-pin MSOP
Brand Microchip Technology Microchip Technology
ADC Resolution 16 bit 16 bit
Analog Input Channels 2 channels 2 channels
Conversion Rate 15 samples per second 15 samples per second
Supply Voltage Range 2.7 V to 5.5 V 2.7 V to 5.5 V
Digital Interface I2C I2C
Conversion Technology Delta-sigma Delta-sigma
Input Configuration Differential inputs Differential inputs
Onboard Reference 2.048 V 2.048 V

Penyeberangsung Jelas

  • High resolution combined with a slow conversion rate (vsMCP3426A7T-E/MS)
  • Two differential channels in an 8-pin MSOP (vsMCP3426A7T-E/MS)
  • Integrated 2.048 V reference (vsMCP3426A7T-E/MS)

Catatan Desain

Route the two differential input channels as short, closely matched pairs and keep them away from I2C clock traces, switching nodes, and high-current return paths. Place input filtering and protection components near the ADC pins rather than near the sensors, where long analog traces could increase susceptibility to coupling. Provide a quiet ground return for the analog section and use the package and datasheet pin assignments when defining the PCB footprint.

Decouple the 2.7 V to 5.5 V supply close to the device with the capacitance and ESR requirements stated in the manufacturer datasheet. Keep analog and digital return currents separated as far as the board construction permits, and avoid sharing a narrow return segment with switching converters or relay drivers. Confirm that supply ripple and noise remain within the ADC’s allowable limits because they can otherwise degrade conversion accuracy and apparent resolution.

Do not treat a 16-bit resolution figure as guaranteed end-to-end accuracy. Overall error also includes reference error, gain error, offset, input noise, front-end errors, and quantization. Check whether the measurement signal can remain within the input limits for the selected gain and reference, and confirm that the 15 SPS conversion rate satisfies the application’s timing. The -40 °C to +125 °C operating range also requires component-level thermal verification in the final assembly.

Use anti-alias filtering tailored to the 15 SPS conversion rate so that out-of-band noise is attenuated before reaching the delta-sigma modulator. For slowly varying sensors, a modest RC network may be adequate, but resistance and capacitor selection must preserve differential channel matching and settle after each conversion. Verify the complete input path with the intended source impedance because long sensor wiring can introduce leakage, pickup, and unbalanced filtering.

Maklumat Kesediaan

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

RoHS compliance is identified by the component listing. REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer or current material declaration.

Data disahkan pada: 2026-11-15 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

MCP3426A7-E/MS datasheet MCP3426A7-E/MS pinout MCP3426A7-E/MS datasheet pdf MCP3426A7-E/MS specifications Microchip MCP3426A7-E/MS MCP3426A7-E/MS equivalent MCP3426A7-E/MS replacement MCP3426A7-E/MS cross reference MCP3426A7-E/MS vs MCP3426A7T-E/MS MCP3426A7-E/MS price MCP3426A7-E/MS stock MCP3426A7-E/MS 16 bit ADC MCP3426A7-E/MS MSOP pinout MCP3426A7-E/MS sensor application

Komponen dan Tanda berkaitan

Microchip Technology MCP3426A7-E/MS MCP3426A7T-E/MS MCP3426A7-E/MC MCP3426 analog-to-digital converter ADC delta-sigma ADC precision ADC integrated circuit semiconductor differential input 16-bit resolution 15 SPS conversion rate 2.048 V reference I2C 8-pin MSOP MSOP package family surface-mount package RoHS REACH AEC-Q100 industrial sensor measurement battery monitoring process control
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ