Texas Instruments

MSP430F2616TPM - 16MHz Mixed-Signal MCU | Texas Instruments

MPN: MSP430F2616TPM ✓ सक्रिय
2.5 V / 3.3 V Vdss 64-LQFP (10 x 10 mm) Package 16 MHz Speed 92 KB Memory
न्यूनतम ऑर्डर मात्रा: 1 |

MSP430F2616TPM अवलोकन

The Texas Instruments MSP430F2616TPM is a 16 MHz mixed-signal microcontroller with 92KB Flash, 4KB SRAM, a 12-bit ADC, dual 12-bit DACs, I2C, SPI, UART, a hardware multiplier, DMA, and up to 64 I/O pins in a 64-LQFP package. Its 16-bit RISC architecture and five low-power modes are designed for portable measurement and embedded control systems.

An MSP430 mixed-signal microcontroller combines a low-power CPU with analog and digital peripherals on one device, allowing measurement, control, and communication functions to share a compact platform. The MSP430F2616 belongs to the MSP430F2xx family and supports low-power battery-powered designs where energy efficiency, fast wake-up behavior, and integrated conversion resources are important.

The MSP430F2616TPM operates at up to 16 MHz and provides 92KB of Flash plus 4KB of SRAM. Its integrated 12-bit ADC supports analog measurement, while two 12-bit DACs support programmable analog outputs. Four USCI modules provide serial connectivity, including I2C, SPI, and UART functions, and DMA assists with efficient peripheral data movement.

The device combines a 16-bit RISC CPU with 16-bit registers and a hardware multiplier, supporting efficient control-loop and signal-processing tasks. The manufacturer describes the MSP430 family architecture as optimized for extended battery life through multiple low-power operating modes. Integrated analog peripherals reduce the need for separate converters in instrument, sensor, and portable-control designs.

Typical applications include portable measurement instruments, battery-powered sensor nodes, industrial monitoring systems, low-power data loggers, and embedded control products. The combination of 92KB Flash, 4KB SRAM, 12-bit conversion capability, and serial interfaces supports designs that must acquire measurements, run control algorithms, and communicate with external systems.

When laying out the PCB, place the MCU power connections and decoupling capacitors according to the manufacturer datasheet guidance, and preserve the 64-LQFP footprint and exposed-pad requirements where applicable. Review the complete pin-description table before assigning analog inputs, communication pins, and supply connections. The exact pin names and alternate-function assignments should be taken from the MSP430F2616 datasheet.

This product page combines manufacturer specifications, package information, application guidance, and practical sourcing considerations for engineers evaluating the MSP430F2616TPM. It supports a faster selection process by presenting the MCU's memory, conversion, connectivity, and low-power characteristics together while directing detailed design decisions to the authoritative Texas Instruments documentation.

के लिए ड्रॉप-इन विकल्प MSP430F2616TPM — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं MSP430F2616TPM (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package, ADC Resolution, Flash Memory, Hardware Multiplier, SRAM.

Texas Instruments
Package: 80-pin LQFP, 12 x 12 mm
ADC Resolution: 12 bit
Hardware Multiplier: Present
इसके साथ तुलना करें MSP430F2616TPM →
Texas Instruments
Package: 64-LQFP (10 mm x 10 mm)
Flash Memory: 116 KB (116K x 8 + 256 bytes)
SRAM: 8 KB
इसके साथ तुलना करें MSP430F2616TPM →

MSP430F2616TPMR

✅ ड्रॉप-इन
📦 64-LQFP (10 x 10 mm)
Same MSP430F2616 device and 64-LQFP package; ordering suffix changes from TPM to TPMR, with no quantified electrical difference stated in the available listing

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

MSP430F2616TPN

✅ ड्रॉप-इन
Texas Instruments
📦 64-LQFP (10 x 10 mm)
16-bit RISC · 16 MHz · 92 KB · 4 KB · 12 bit · 12 bit · 2 channels · I2C, SPI, and UART

कीमत के लिए संपर्क करें

डेटाशीट देखें →

MSP430F2616TPM Maximum Ratings और Electrical Characteristics

CPU Architecture 16-bit RISC
Maximum CPU Frequency 16 MHz
Flash Memory 92 KB
SRAM 4 KB
ADC Resolution 12 bits
DAC Configuration Dual 12-bit DAC
Serial Interfaces I2C, SPI, UART
Hardware Multiplier Yes
DMA Yes
I/O Pins Up to 64
पैकेज 64-LQFP (10 x 10 mm)
सप्लाई वोल्टेज 2.5 V / 3.3 V
Low-Power Modes 5
Register Width 16-bit
RoHS स्थिति unknown
REACH Status unknown

MSP430F2616TPM 64-lqfp (10 x 10 mm) पिन कॉन्फ़िगरेशन गाइड

MSP430F2616TPM (64-lqfp (10 x 10 mm) पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।

MSP430F2616TPM के लिए 64-lqfp (10 x 10 mm) पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: MSP430F2616TPM.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

MSP430F2616TPM के लिए उपयुक्त है 6 अनुप्रयोगs: Portable Measurement Instruments, Battery-Powered Sensor Nodes, Industrial Monitoring Systems, Programmable Analog Control, Low-Power Data Loggers, Embedded Control and Communication Hub.

🔧

Portable Measurement Instruments

The MSP430F2616TPM suits portable meters and field instruments because its 16 MHz 16-bit RISC CPU can process acquired data while the integrated 12-bit ADC handles analog inputs. Its 92KB Flash accommodates firmware for calibration, filtering, and display control, while 4KB SRAM supports working buffers and communication state. The five low-power modes are valuable when the instrument spends much of its operating time between measurements or while awaiting a user action.

🧩

Battery-Powered Sensor Nodes

For battery-powered sensor nodes, the MSP430F2616TPM combines a low-power 16 MHz CPU with a 12-bit ADC, 4KB SRAM, and five operating modes. The ADC supports sensor conditioning and data acquisition, while I2C and SPI allow connection to external sensors, memory, or radio modules. The 92KB Flash capacity supports protocol stacks and local filtering without requiring a separate processor.

🏭

Industrial Monitoring Systems

The MSP430F2616TPM is appropriate for industrial monitoring equipment that must capture analog process values and communicate them to a controller. Its 12-bit ADC and dual 12-bit DACs support measurement and output functions, while UART, SPI, and I2C provide links to sensors, data loggers, and service interfaces. The 64-LQFP package offers a high pin count for discrete monitoring and control connections.

⚡

Programmable Analog Control

The dual 12-bit DACs make the MSP430F2616TPM useful in systems that require programmable analog references or control outputs in addition to ADC-based sensing. A 16 MHz CPU can execute control calculations and update outputs while the hardware multiplier supports efficient arithmetic operations. This mixed-signal arrangement can reduce board complexity compared with separate microcontroller and converter implementations.

🖥️

Low-Power Data Loggers

In a low-power data logger, the MSP430F2616TPM can acquire sensor readings through its 12-bit ADC, store operating parameters in 92KB Flash, and use 4KB SRAM for active records and protocol buffers. The integrated USCI-based serial interfaces support configuration and data transfer, while DMA can improve data movement efficiency. Its low-power operating modes help reduce energy use during inactive logging intervals.

🌐

Embedded Control and Communication Hub

The MSP430F2616TPM can serve as a compact control hub for designs combining local analog measurement, programmable outputs, and external communications. Its 16-bit RISC core and hardware multiplier support efficient control logic, while I2C, SPI, UART, and DMA handle connected peripherals and data transfer. The 64-LQFP package provides ample I/O for status indicators, sensors, actuators, and interface routing.

अनुशंसित उत्पादों का सारांश

MSP430F2616TPM Texas Instruments उपयोग में: Portable Measurement Instruments, Battery-Powered Sensor Nodes, Industrial Monitoring Systems, Programmable Analog Control, Low-Power Data Loggers, Embedded Control and Communication Hub MSP430F2616TPMR Same-device ordering alternative उपयोग में: Portable Measurement Instruments, Industrial Monitoring Systems, Low-Power Data Loggers MSP430F2616 Family configuration उपयोग में: Battery-Powered Sensor Nodes, Programmable Analog Control, Embedded Control and Communication Hub
What is the operating voltage of MSP430F2616TPM?
The MSP430F2616TPM operates from a 2.5 V or 3.3 V supply. According to the Texas Instruments product page, the device is a mixed-signal microcontroller designed around the MSP430F2xx architecture. Confirm the operating limits and decoupling requirements against the manufacturer datasheet before applying the part to a new board.
How much memory does the MSP430F2616TPM have?
The MSP430F2616TPM provides 92KB of Flash memory and 4KB of SRAM. The Texas Instruments product page identifies the part as a 16 MHz MCU with 92KB Flash and 4KB SRAM. Use Flash for firmware and constants, and plan RAM carefully when combining communication buffers, stack usage, and data acquisition.
Does the MSP430F2616TPM include ADC and DAC peripherals?
Yes. The MSP430F2616TPM includes a 12-bit ADC and dual 12-bit DACs according to the manufacturer product information. These integrated converters make the device suitable for analog measurement and programmable output systems. The datasheet should be used for channel counts, reference options, timing, and analog pin assignments.
Which serial interfaces does the MSP430F2616TPM support?
The MSP430F2616TPM supports I2C, SPI, and UART through its USCI modules. The manufacturer describes the device as having serial connectivity for embedded systems and portable measurement products. Pin multiplexing and the number of independently usable channels depend on the package and device configuration, so verify assignments in the pin-description table.
What is the clock speed of the MSP430F2616TPM?
The MSP430F2616TPM operates at up to 16 MHz. Its 16-bit RISC CPU uses 16-bit registers and includes a hardware multiplier, allowing efficient control and measurement processing without requiring a separate digital accelerator. Actual timing depends on the clock source, clock divider settings, flash wait states, and the selected low-power mode.
What package does the MSP430F2616TPM use?
The MSP430F2616TPM is supplied in a 64-LQFP package measuring 10 x 10 mm. The package provides up to 64 I/O pins for the mixed-signal peripheral set. Use the manufacturer package drawing and land-pattern information to confirm pad dimensions, exposed-pad requirements, and PCB manufacturing rules.
Where can I download the MSP430F2616TPM datasheet?
The MSP430F2616 datasheet can be accessed through the Texas Instruments MSP430F2616 product page at https://www.ti.com/product/MSP430F2616. The same page provides product parameters, ordering information, and support resources. Use the MSP430F2616TPM part-details page to confirm the exact orderable suffix and package.
Where can I find the MSP430F2616TPM pinout?
The MSP430F2616TPM pinout is published in the pin-description and package sections of the Texas Instruments MSP430F2616 datasheet. The manufacturer product page links to that documentation and provides part-specific ordering information. For PCB design, use the exact 64-LQFP pin numbers rather than a generic MSP430 diagram because alternate functions vary by device.
Is the MSP430F2616TPM suitable for battery-powered measurement?
Yes. The MSP430F2616TPM is designed for portable measurement applications and includes five low-power operating modes. Its 16-bit RISC architecture, integrated 12-bit ADC, dual 12-bit DACs, and low-power design can support instrumentation that must balance measurement performance with battery life. The exact sleep current and wake-up timing should be taken from the manufacturer datasheet.
What is the best drop-in replacement for MSP430F2616TPM?
The MSP430F2616TPMR is the directly identified same-package replacement in the available ordering information, using the same 64-LQFP device family. A replacement should also be checked for memory, analog peripherals, pin multiplexing, and firmware compatibility. Use the Request a Quote form on this page to confirm exact suffix availability and current lead time.
What can replace the MSP430F2616TPM?
The MSP430F2616TPMR is a documented ordering variant that retains the MSP430F2616 device identity and 64-LQFP package. Other processors may provide similar functions, but a true drop-in replacement requires matching pinout, electrical limits, peripheral assignments, and software support. The manufacturer ordering and datasheet information should control the final substitution decision.
MSP430F2616TPM vs MSP430F2616TPMR - which is better?
The two orderable identifiers refer to the same MSP430F2616TPM device family and 64-LQFP package, but their packaging or order-code treatment differs. Choose the suffix that matches the assembly process, labeling, and supply requirements of the finished product. Review the manufacturer part-details page and current quotation response before ordering.
When should I choose the MSP430F2616TPM over another low-power MCU?
Choose the MSP430F2616TPM when the design needs a 16 MHz 16-bit RISC core, 92KB Flash, 4KB SRAM, integrated 12-bit ADC and dual DAC, and I2C, SPI, and UART connectivity in a 64-LQFP package. Its five low-power modes are useful for portable measurement. Compare these requirements with the alternative device's memory, converter resources, package, and toolchain before selecting a substitute.
Is MSP430F2616TPM the same as MSP430F2616?
MSP430F2616TPM is the orderable MSP430F2616 configuration with the TPM package suffix. The family description identifies the MSP430F2616 as a 16 MHz MCU with 92KB Flash, 4KB SRAM, a 12-bit ADC, dual 12-bit DACs, serial interfaces, DMA, and a hardware multiplier. The exact mechanical and ordering details are defined by the TPM suffix.
What are the key specifications engineers should know about MSP430F2616TPM?
The MSP430F2616TPM combines a 16 MHz 16-bit RISC CPU, 92KB Flash, 4KB SRAM, a 12-bit ADC, dual 12-bit DACs, I2C, SPI, UART, DMA, a hardware multiplier, and up to 64 I/O pins in a 64-LQFP package. According to Texas Instruments product information, it also provides five low-power modes for portable measurement and battery-powered embedded systems.
Where can I buy MSP430F2616TPM and check its lead time?
The MSP430F2616TPM can be requested through the Request a Quote form on this page. The form is the appropriate route for checking the exact suffix, current commercial terms, stock status, and production lead time without relying on a static price. For technical confirmation, use the Texas Instruments product page and datasheet.

के लिए इंजीनियरिंग संदर्भ डेटा MSP430F2616TPM — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the MSP430F2616TPM when your design requires a 16 MHz 16-bit RISC MCU with 92KB Flash, 4KB SRAM, a 12-bit ADC, dual 12-bit DACs, I2C, SPI, UART, DMA, and a 64-LQFP package. It is particularly suitable for portable instruments, battery-powered sensor nodes, data loggers, and industrial monitoring systems where low-power modes and integrated analog conversion matter. Choose the MSP430F2616TPMR when that ordering suffix better matches the required supply or assembly format while retaining the same device family and package. Treat other MSP430 devices as alternatives only after checking pin multiplexing, peripheral availability, memory, and firmware compatibility. A processor from a different architecture may require a new PCB, different toolchain, and a complete software port, so it should be selected as a redesign rather than a drop-in replacement.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद MSP430F2616TPMR MSP430F2616
Package 64-LQFP (10 x 10 mm) 64-LQFP (10 x 10 mm) 64-LQFP (10 x 10 mm)
Brand Texas Instruments Texas Instruments Texas Instruments
CPU Frequency 16 MHz 16 MHz 16 MHz
Flash Memory 92 KB 92 KB 92 KB
SRAM 4 KB 4 KB 4 KB
ADC 12-bit 12-bit 12-bit
DAC Dual 12-bit Dual 12-bit Dual 12-bit
Serial Interfaces I2C, SPI, UART I2C, SPI, UART I2C, SPI, UART
Special Features DMA and hardware multiplier DMA and hardware multiplier DMA and hardware multiplier

मुख्य विशेषताएँ

  • Integrated mixed-signal resources (बनामGeneral-purpose MCU without the same listed converter set)
  • Memory capacity for embedded firmware (बनामLower-memory 8-bit or small-memory mixed-signal MCU)
  • Connectivity integrated in one package (बनामMCU requiring external serial interface devices)

डिज़ाइन नोट्स

Use the manufacturer power-supply and decoupling recommendations for the 64-LQFP device. The MSP430F2616TPM supports 2.5 V or 3.3 V operation, so do not assume that both rails are interchangeable in every peripheral or board configuration. Place supply capacitors close to the relevant power pins and verify the allowed voltage and sequencing requirements in the datasheet before powering the device.

Keep the 64-LQFP footprint within the manufacturer land-pattern specification and maintain unobstructed thermal and soldering access around the package. Because the MCU combines analog converters, digital control, and multiple serial functions, route analog inputs away from fast digital switching nodes and provide a quiet return path. Check the exposed-pad treatment against the specific package drawing before release.

Do not select a replacement solely by the MSP430F2xx family name. Verify the exact memory size, ADC and DAC resources, USCI channel assignments, pin multiplexing, supply limits, and development-tool compatibility. The MSP430F2616TPMR is the closest ordering alternative identified here, while a cross-family MCU may require a PCB change, firmware revision, or peripheral redesign.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The available product information does not provide a complete compliance statement for this orderable suffix. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals status with the manufacturer using the exact MSP430F2616TPM ordering information.

डेटा सत्यापन तिथि: 2026-11-20 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

MSP430F2616TPM datasheet MSP430F2616TPM pinout MSP430F2616TPM datasheet pdf MSP430F2616TPM equivalent MSP430F2616TPM replacement MSP430F2616TPM cross reference MSP430F2616TPM vs MSP430F2616TPMR MSP430F2616TPM price MSP430F2616TPM stock Texas Instruments MSP430F2616TPM MSP430F2616 16MHz microcontroller MSP430F2616 12-bit ADC DAC MSP430F2616 64-LQFP MSP430F2616 battery powered measurement

संबंधित कंपोनेंट्स और शब्द

Texas Instruments MSP430F2616TPM MSP430F2616TPMR MSP430F2616 MSP430F2xx mixed-signal microcontroller 16-bit RISC CPU 16-bit registers microcontroller semiconductor embedded control low-power mode portable measurement battery-powered sensor node 12-bit ADC dual 12-bit DAC I2C SPI UART USCI DMA hardware multiplier 92KB Flash 4KB SRAM 64-LQFP package surface-mount package
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें