MSP430F2616TPM - 16MHz Mixed-Signal MCU | Texas Instruments
料号: MSP430F2616TPM ✓ 量产中MSP430F2616TPM 概述
An MSP430 mixed-signal microcontroller combines a low-power CPU with analog and digital peripherals on one device, allowing measurement, control, and communication functions to share a compact platform. The MSP430F2616 belongs to the MSP430F2xx family and supports low-power battery-powered designs where energy efficiency, fast wake-up behavior, and integrated conversion resources are important.
The MSP430F2616TPM operates at up to 16 MHz and provides 92KB of Flash plus 4KB of SRAM. Its integrated 12-bit ADC supports analog measurement, while two 12-bit DACs support programmable analog outputs. Four USCI modules provide serial connectivity, including I2C, SPI, and UART functions, and DMA assists with efficient peripheral data movement.
The device combines a 16-bit RISC CPU with 16-bit registers and a hardware multiplier, supporting efficient control-loop and signal-processing tasks. The manufacturer describes the MSP430 family architecture as optimized for extended battery life through multiple low-power operating modes. Integrated analog peripherals reduce the need for separate converters in instrument, sensor, and portable-control designs.
Typical applications include portable measurement instruments, battery-powered sensor nodes, industrial monitoring systems, low-power data loggers, and embedded control products. The combination of 92KB Flash, 4KB SRAM, 12-bit conversion capability, and serial interfaces supports designs that must acquire measurements, run control algorithms, and communicate with external systems.
When laying out the PCB, place the MCU power connections and decoupling capacitors according to the manufacturer datasheet guidance, and preserve the 64-LQFP footprint and exposed-pad requirements where applicable. Review the complete pin-description table before assigning analog inputs, communication pins, and supply connections. The exact pin names and alternate-function assignments should be taken from the MSP430F2616 datasheet.
This product page combines manufacturer specifications, package information, application guidance, and practical sourcing considerations for engineers evaluating the MSP430F2616TPM. It supports a faster selection process by presenting the MCU's memory, conversion, connectivity, and low-power characteristics together while directing detailed design decisions to the authoritative Texas Instruments documentation.
直接替换替代料: MSP430F2616TPM ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: MSP430F2616TPM (相同外形与封装尺寸) ——差异在于 Package, ADC Resolution, Flash Memory, Hardware Multiplier, SRAM.
MSP430F2616TPMR
✅ 直接替换📋 参考替代料(不在目录中)
MSP430F2616TPN
✅ 直接替换联系询价
查看数据手册 →MSP430F2616TPM 最大额定值与电气特性
| CPU Architecture | 16-bit RISC |
| Maximum CPU Frequency | 16 MHz |
| Flash Memory | 92 KB |
| SRAM | 4 KB |
| ADC Resolution | 12 bits |
| DAC Configuration | Dual 12-bit DAC |
| Serial Interfaces | I2C, SPI, UART |
| Hardware Multiplier | Yes |
| DMA | Yes |
| I/O Pins | Up to 64 |
| 封装 | 64-LQFP (10 x 10 mm) |
| 电源电压 | 2.5 V / 3.3 V |
| Low-Power Modes | 5 |
| Register Width | 16-bit |
| RoHS 状态 | unknown |
| REACH Status | unknown |
MSP430F2616TPM 64-lqfp (10 x 10 mm) 引脚配置指南
MSP430F2616TPM(64-lqfp (10 x 10 mm) 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: MSP430F2616TPM.
请参阅 数据手册 以查看完整引脚配置。
典型应用
MSP430F2616TPM 适用于 6 应用s: Portable Measurement Instruments, Battery-Powered Sensor Nodes, Industrial Monitoring Systems, Programmable Analog Control, Low-Power Data Loggers, Embedded Control and Communication Hub.
Portable Measurement Instruments
The MSP430F2616TPM suits portable meters and field instruments because its 16 MHz 16-bit RISC CPU can process acquired data while the integrated 12-bit ADC handles analog inputs. Its 92KB Flash accommodates firmware for calibration, filtering, and display control, while 4KB SRAM supports working buffers and communication state. The five low-power modes are valuable when the instrument spends much of its operating time between measurements or while awaiting a user action.
推荐
Battery-Powered Sensor Nodes
For battery-powered sensor nodes, the MSP430F2616TPM combines a low-power 16 MHz CPU with a 12-bit ADC, 4KB SRAM, and five operating modes. The ADC supports sensor conditioning and data acquisition, while I2C and SPI allow connection to external sensors, memory, or radio modules. The 92KB Flash capacity supports protocol stacks and local filtering without requiring a separate processor.
推荐
Industrial Monitoring Systems
The MSP430F2616TPM is appropriate for industrial monitoring equipment that must capture analog process values and communicate them to a controller. Its 12-bit ADC and dual 12-bit DACs support measurement and output functions, while UART, SPI, and I2C provide links to sensors, data loggers, and service interfaces. The 64-LQFP package offers a high pin count for discrete monitoring and control connections.
推荐
Programmable Analog Control
The dual 12-bit DACs make the MSP430F2616TPM useful in systems that require programmable analog references or control outputs in addition to ADC-based sensing. A 16 MHz CPU can execute control calculations and update outputs while the hardware multiplier supports efficient arithmetic operations. This mixed-signal arrangement can reduce board complexity compared with separate microcontroller and converter implementations.
推荐
Low-Power Data Loggers
In a low-power data logger, the MSP430F2616TPM can acquire sensor readings through its 12-bit ADC, store operating parameters in 92KB Flash, and use 4KB SRAM for active records and protocol buffers. The integrated USCI-based serial interfaces support configuration and data transfer, while DMA can improve data movement efficiency. Its low-power operating modes help reduce energy use during inactive logging intervals.
推荐
Embedded Control and Communication Hub
The MSP430F2616TPM can serve as a compact control hub for designs combining local analog measurement, programmable outputs, and external communications. Its 16-bit RISC core and hardware multiplier support efficient control logic, while I2C, SPI, UART, and DMA handle connected peripherals and data transfer. The 64-LQFP package provides ample I/O for status indicators, sensors, actuators, and interface routing.
推荐
推荐产品汇总
工程参考数据: MSP430F2616TPM ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | MSP430F2616TPMR | MSP430F2616 |
|---|---|---|---|
| Package | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| CPU Frequency | 16 MHz | 16 MHz | 16 MHz |
| Flash Memory | 92 KB | 92 KB | 92 KB |
| SRAM | 4 KB | 4 KB | 4 KB |
| ADC | 12-bit | 12-bit | 12-bit |
| DAC | Dual 12-bit | Dual 12-bit | Dual 12-bit |
| Serial Interfaces | I2C, SPI, UART | I2C, SPI, UART | I2C, SPI, UART |
| Special Features | DMA and hardware multiplier | DMA and hardware multiplier | DMA and hardware multiplier |
关键差异点
- Integrated mixed-signal resources (对比 General-purpose MCU without the same listed converter set)
- Memory capacity for embedded firmware (对比 Lower-memory 8-bit or small-memory mixed-signal MCU)
- Connectivity integrated in one package (对比 MCU requiring external serial interface devices)
设计说明
Use the manufacturer power-supply and decoupling recommendations for the 64-LQFP device. The MSP430F2616TPM supports 2.5 V or 3.3 V operation, so do not assume that both rails are interchangeable in every peripheral or board configuration. Place supply capacitors close to the relevant power pins and verify the allowed voltage and sequencing requirements in the datasheet before powering the device.
Keep the 64-LQFP footprint within the manufacturer land-pattern specification and maintain unobstructed thermal and soldering access around the package. Because the MCU combines analog converters, digital control, and multiple serial functions, route analog inputs away from fast digital switching nodes and provide a quiet return path. Check the exposed-pad treatment against the specific package drawing before release.
Do not select a replacement solely by the MSP430F2xx family name. Verify the exact memory size, ADC and DAC resources, USCI channel assignments, pin multiplexing, supply limits, and development-tool compatibility. The MSP430F2616TPMR is the closest ordering alternative identified here, while a cross-family MCU may require a PCB change, firmware revision, or peripheral redesign.
合规信息
The available product information does not provide a complete compliance statement for this orderable suffix. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals status with the manufacturer using the exact MSP430F2616TPM ordering information.