MSP430F2616TPM - 16MHz Mixed-Signal MCU | Texas Instruments
N.º da peça: MSP430F2616TPM ✓ AtivoMSP430F2616TPM Visão geral
An MSP430 mixed-signal microcontroller combines a low-power CPU with analog and digital peripherals on one device, allowing measurement, control, and communication functions to share a compact platform. The MSP430F2616 belongs to the MSP430F2xx family and supports low-power battery-powered designs where energy efficiency, fast wake-up behavior, and integrated conversion resources are important.
The MSP430F2616TPM operates at up to 16 MHz and provides 92KB of Flash plus 4KB of SRAM. Its integrated 12-bit ADC supports analog measurement, while two 12-bit DACs support programmable analog outputs. Four USCI modules provide serial connectivity, including I2C, SPI, and UART functions, and DMA assists with efficient peripheral data movement.
The device combines a 16-bit RISC CPU with 16-bit registers and a hardware multiplier, supporting efficient control-loop and signal-processing tasks. The manufacturer describes the MSP430 family architecture as optimized for extended battery life through multiple low-power operating modes. Integrated analog peripherals reduce the need for separate converters in instrument, sensor, and portable-control designs.
Typical applications include portable measurement instruments, battery-powered sensor nodes, industrial monitoring systems, low-power data loggers, and embedded control products. The combination of 92KB Flash, 4KB SRAM, 12-bit conversion capability, and serial interfaces supports designs that must acquire measurements, run control algorithms, and communicate with external systems.
When laying out the PCB, place the MCU power connections and decoupling capacitors according to the manufacturer datasheet guidance, and preserve the 64-LQFP footprint and exposed-pad requirements where applicable. Review the complete pin-description table before assigning analog inputs, communication pins, and supply connections. The exact pin names and alternate-function assignments should be taken from the MSP430F2616 datasheet.
This product page combines manufacturer specifications, package information, application guidance, and practical sourcing considerations for engineers evaluating the MSP430F2616TPM. It supports a faster selection process by presenting the MCU's memory, conversion, connectivity, and low-power characteristics together while directing detailed design decisions to the authoritative Texas Instruments documentation.
Alternativas drop-in para MSP430F2616TPM — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com MSP430F2616TPM (mesmo formato e footprint) — diferindo em Package, ADC Resolution, Flash Memory, Hardware Multiplier, SRAM.
MSP430F2616TPMR
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
MSP430F2616TPN
✅ Drop-InConsulte o preço
Ver ficha técnica →MSP430F2616TPM Classificações máximas e características elétricas
| CPU Architecture | 16-bit RISC |
| Maximum CPU Frequency | 16 MHz |
| Flash Memory | 92 KB |
| SRAM | 4 KB |
| ADC Resolution | 12 bits |
| DAC Configuration | Dual 12-bit DAC |
| Serial Interfaces | I2C, SPI, UART |
| Hardware Multiplier | Yes |
| DMA | Yes |
| I/O Pins | Up to 64 |
| Encapsulamento | 64-LQFP (10 x 10 mm) |
| Tensão de alimentação | 2.5 V / 3.3 V |
| Low-Power Modes | 5 |
| Register Width | 16-bit |
| Status RoHS | unknown |
| REACH Status | unknown |
Guia de Configuração de Pinos do MSP430F2616TPM 64-lqfp (10 x 10 mm)
Configuração de pinos para MSP430F2616TPM (pacote 64-lqfp (10 x 10 mm)). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para MSP430F2616TPM.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
MSP430F2616TPM é adequado para 6 aplicaçãos: Portable Measurement Instruments, Battery-Powered Sensor Nodes, Industrial Monitoring Systems, Programmable Analog Control, Low-Power Data Loggers, Embedded Control and Communication Hub.
Portable Measurement Instruments
The MSP430F2616TPM suits portable meters and field instruments because its 16 MHz 16-bit RISC CPU can process acquired data while the integrated 12-bit ADC handles analog inputs. Its 92KB Flash accommodates firmware for calibration, filtering, and display control, while 4KB SRAM supports working buffers and communication state. The five low-power modes are valuable when the instrument spends much of its operating time between measurements or while awaiting a user action.
Recomendado
Battery-Powered Sensor Nodes
For battery-powered sensor nodes, the MSP430F2616TPM combines a low-power 16 MHz CPU with a 12-bit ADC, 4KB SRAM, and five operating modes. The ADC supports sensor conditioning and data acquisition, while I2C and SPI allow connection to external sensors, memory, or radio modules. The 92KB Flash capacity supports protocol stacks and local filtering without requiring a separate processor.
Recomendado
Industrial Monitoring Systems
The MSP430F2616TPM is appropriate for industrial monitoring equipment that must capture analog process values and communicate them to a controller. Its 12-bit ADC and dual 12-bit DACs support measurement and output functions, while UART, SPI, and I2C provide links to sensors, data loggers, and service interfaces. The 64-LQFP package offers a high pin count for discrete monitoring and control connections.
Recomendado
Programmable Analog Control
The dual 12-bit DACs make the MSP430F2616TPM useful in systems that require programmable analog references or control outputs in addition to ADC-based sensing. A 16 MHz CPU can execute control calculations and update outputs while the hardware multiplier supports efficient arithmetic operations. This mixed-signal arrangement can reduce board complexity compared with separate microcontroller and converter implementations.
Recomendado
Low-Power Data Loggers
In a low-power data logger, the MSP430F2616TPM can acquire sensor readings through its 12-bit ADC, store operating parameters in 92KB Flash, and use 4KB SRAM for active records and protocol buffers. The integrated USCI-based serial interfaces support configuration and data transfer, while DMA can improve data movement efficiency. Its low-power operating modes help reduce energy use during inactive logging intervals.
Recomendado
Embedded Control and Communication Hub
The MSP430F2616TPM can serve as a compact control hub for designs combining local analog measurement, programmable outputs, and external communications. Its 16-bit RISC core and hardware multiplier support efficient control logic, while I2C, SPI, UART, and DMA handle connected peripherals and data transfer. The 64-LQFP package provides ample I/O for status indicators, sensors, actuators, and interface routing.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para MSP430F2616TPM — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | MSP430F2616TPMR | MSP430F2616 |
|---|---|---|---|
| Package | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| CPU Frequency | 16 MHz | 16 MHz | 16 MHz |
| Flash Memory | 92 KB | 92 KB | 92 KB |
| SRAM | 4 KB | 4 KB | 4 KB |
| ADC | 12-bit | 12-bit | 12-bit |
| DAC | Dual 12-bit | Dual 12-bit | Dual 12-bit |
| Serial Interfaces | I2C, SPI, UART | I2C, SPI, UART | I2C, SPI, UART |
| Special Features | DMA and hardware multiplier | DMA and hardware multiplier | DMA and hardware multiplier |
Principais diferenciais
- Integrated mixed-signal resources (vs General-purpose MCU without the same listed converter set)
- Memory capacity for embedded firmware (vs Lower-memory 8-bit or small-memory mixed-signal MCU)
- Connectivity integrated in one package (vs MCU requiring external serial interface devices)
Notas de projeto
Use the manufacturer power-supply and decoupling recommendations for the 64-LQFP device. The MSP430F2616TPM supports 2.5 V or 3.3 V operation, so do not assume that both rails are interchangeable in every peripheral or board configuration. Place supply capacitors close to the relevant power pins and verify the allowed voltage and sequencing requirements in the datasheet before powering the device.
Keep the 64-LQFP footprint within the manufacturer land-pattern specification and maintain unobstructed thermal and soldering access around the package. Because the MCU combines analog converters, digital control, and multiple serial functions, route analog inputs away from fast digital switching nodes and provide a quiet return path. Check the exposed-pad treatment against the specific package drawing before release.
Do not select a replacement solely by the MSP430F2xx family name. Verify the exact memory size, ADC and DAC resources, USCI channel assignments, pin multiplexing, supply limits, and development-tool compatibility. The MSP430F2616TPMR is the closest ordering alternative identified here, while a cross-family MCU may require a PCB change, firmware revision, or peripheral redesign.
Informações de conformidade
The available product information does not provide a complete compliance statement for this orderable suffix. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals status with the manufacturer using the exact MSP430F2616TPM ordering information.