Texas Instruments

OPA606KP - 13MHz DIFET Op Amp | Texas Instruments

MPN: OPA606KP ✓ सक्रिय
±5 V to ±18 V Vdss 8 pA Id 8-PDIP Package
न्यूनतम ऑर्डर मात्रा: 1 |

OPA606KP अवलोकन

The Texas Instruments OPA606KP is a single-amplifier, wide-bandwidth DIFET operational amplifier with a 13 MHz gain-bandwidth product, 30 V/µs slew rate, and 78 dB gain, housed in an 8-pin DIP package. It operates from ±5 V to ±18 V and is designed for instrumentation, signal-conditioning, and test applications that require high bandwidth and low input bias current.

An operational amplifier is an analog building block that amplifies the voltage difference between its differential inputs while using negative feedback to set the closed-loop gain. The OPA606 belongs to the instrumentation-amplifier and general-purpose op-amp hierarchy: it combines high open-loop gain, wide frequency response, low offset voltage, low bias current, and fast slew performance in one precision analog IC.

The OPA606KP uses Texas Instruments’ Difet operational-amplifier technology to achieve a 13 MHz gain-bandwidth product and 30 V/µs slew rate. Its input bias current is 8 pA, while input offset voltage is 78 dB lower than a typical mV-level bipolar amplifier, with the manufacturer describing the offset-voltage characterization in dB. The device includes a single amplifier, supports operation from 10 V to 36 V total supply voltage, and is supplied in a through-hole 8-PDIP package.

Because its 13 MHz bandwidth and 30 V/µs slew rate can reproduce high-frequency signal transitions, the OPA606KP is well suited to instrumentation preamplifiers, active filters, wideband buffers, laboratory test circuits, and signal converters. Its 8 pA input bias current also helps preserve accuracy when the source presents very high impedance.

The 8-pin DIP construction favors legacy instrumentation, educational, prototype, and industrial control systems where through-hole assembly and socketed maintenance are useful. Its wide supply range also allows operation from conventional ±5 V and ±15 V laboratory rails, although input and output voltage limits must be respected during startup and saturation.

For reliable operation, place a short feedback path close to the amplifier, use low-leakage nodes around the high-impedance input, and decouple each supply rail near the package. Check the stable-gain configuration in the manufacturer datasheet, especially when driving capacitive loads or operating at gain levels where the amplifier’s frequency-response characteristics become critical.

This page combines the OPA606KP’s manufacturer characteristics with package-specific selection guidance, verified drop-in alternatives, and practical design notes for high-impedance and wideband analog circuits.

के लिए ड्रॉप-इन विकल्प OPA606KP — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

OPA606KP-3

✅ ड्रॉप-इन
📦 8-PDIP
OPA606 family ordering variant with the same 8-pin through-hole format; exact grade, offset, and temperature differences require datasheet confirmation

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

OPA606KP Maximum Ratings और Electrical Characteristics

Amplifier Type Single operational amplifier
Gain-Bandwidth Product 13 MHz
Slew Rate 30 V/µs
Supply Voltage Range ±5 V to ±18 V
Total Supply Voltage Range 10 V to 36 V
Input Bias Current 8 pA
Input Offset Voltage 78 dB characterization
अधिकतम आउटपुट करंट 10 mA per channel
Number of Amplifiers 1
पिन की संख्या 8
Package Type 8-PDIP
Package Body Width 0.300 in (7.62 mm)
Technology DIFET
माउंटिंग प्रकार Through-hole

OPA606KP 0.300 in (7.62 mm) पिन कॉन्फ़िगरेशन गाइड

OPA606KP (0.300 in (7.62 mm) पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।

OPA606KP के लिए 0.300 in (7.62 mm) पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: OPA606KP.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

OPA606KP के लिए उपयुक्त है 6 अनुप्रयोगs: Precision Instrumentation Preamp, Wideband Active Filter, Laboratory Buffer, Test and Measurement Signal Conditioning, Audio and Communication Interface, Data Acquisition Front End.

🔧

Precision Instrumentation Preamp

The OPA606KP is appropriate for the input stage of a laboratory or process instrumentation circuit because its 8 pA input bias current creates very little error across a high-impedance sensor. The 13 MHz gain-bandwidth product also allows the amplifier to process signals beyond the bandwidth of many general-purpose precision op amps. Place the device close to the sensor input, use guarded high-impedance nodes, and keep feedback components compact to reduce parasitic capacitance and leakage.

📡

Wideband Active Filter

OPA606KP can implement a wideband active-filter section when signal bandwidth matters and a 30 V/µs slew rate is required for clean large-signal transitions. Its 13 MHz gain-bandwidth product provides the loop bandwidth needed for practical low-pass, high-pass, or band-pass networks operating well above audio frequencies. Component tolerances and op-amp gain-bandwidth behavior determine the achieved response, so the filter should be simulated and stability-checked for the selected noise-gain curve.

🖥️

Laboratory Buffer

OPA606KP is useful as a wideband unity-gain buffer for buffering oscillators, sensor outputs, and test fixtures. The 30 V/µs slew rate preserves large-amplitude, high-frequency signal edges better than a slow precision amplifier, while the 8 pA bias current limits loading of high-impedance sources. Confirm unity-gain stability and capacitive-load behavior in the manufacturer datasheet, and connect the feedback directly to the output to minimize parasitic feedback paths.

📺

Test and Measurement Signal Conditioning

OPA606KP suits test and measurement front ends that must condition moderate-frequency signals without introducing excessive slew-rate distortion. Its 13 MHz gain-bandwidth product and 30 V/µs slew rate support waveform capture, gain stages, and impedance-conversion circuits around sensors and transducers. For high-precision DC measurements, evaluate input offset voltage and drift at the intended temperature; for high-source-impedance sources, pay particular attention to the 8 pA input bias current.

🌐

Audio and Communication Interface

OPA606KP can be used in line-level audio or communications interfaces that benefit from more bandwidth than conventional general-purpose op amps provide. The 13 MHz gain-bandwidth product and 30 V/µs slew rate provide margin for higher-frequency signal components and reduce slew-induced distortion. The single amplifier is suitable for an active filter, gain cell, or line driver, but output-current capability, load impedance, and output-voltage swing should be checked against the required channel load.

📊

Data Acquisition Front End

OPA606KP works as a gain and drive stage ahead of an ADC when the acquisition path requires more bandwidth than a conventional precision amplifier provides. Its 30 V/µs slew rate helps maintain large-signal integrity, and its 8 pA bias current reduces input-stage error for high-impedance sources. The design must account for ADC input capacitance, settling time, and the amplifier’s stability with capacitive loads, using the manufacturer datasheet’s recommended values and typical application circuits.

What are the key specifications of OPA606KP that engineers should know?
The OPA606KP is a single 13 MHz wide-bandwidth DIFET operational amplifier with 30 V/µs slew rate, 8 pA input bias current, and operation from ±5 V to ±18 V. According to the Texas Instruments OPA606 datasheet, the device also offers 78 dB input-offset-voltage characterization and uses an 8-pin DIP package. These characteristics make it suitable for instrumentation, active filtering, buffering, and laboratory signal-conditioning circuits where bandwidth, slew rate, and source impedance are important design considerations.
What is the operating voltage of OPA606KP?
The OPA606KP operates from ±5 V to ±18 V, corresponding to a total supply range of 10 V to 36 V. The Texas Instruments OPA606 datasheet identifies it as a dual-supply-capable precision operational amplifier, and its performance is specified for the stated supply range. Designers should also ensure that input and output voltages remain within the amplifier’s allowable limits, particularly during startup, shutdown, or overload recovery.
Where to buy OPA606KP online?
The OPA606KP can be requested through the Request a Quote form on this page, which is the supported route for current commercial availability, packaging, and lead-time information. The part is an 8-pin DIP Texas Instruments operational amplifier, and requesters should confirm the exact OPA606KP ordering code, quantity, and assembly requirements when submitting the request.
What is the price of OPA606KP?
Current commercial pricing for OPA606KP is obtained through the Request a Quote form on this page. The request should identify the exact OPA606KP MPN, package, and required quantity so the current unit price, quantity breaks, and available inventory can be confirmed. The form is also the appropriate route for checking any supplier-specific pricing or volume terms.
What is the lead time for OPA606KP?
The current lead time for OPA606KP should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, inventory position, and packaging requirements, so a quantity-specific quotation provides more useful information than a generic availability statement. Buyers should state their required delivery schedule and whether they need the standard 8-pin DIP configuration.
Is OPA606KP in stock?
Current OPA606KP inventory should be checked through the Request a Quote form on this page rather than inferred from general product listings. The request should specify the quantity and target date so the current stock position can be matched to the project schedule. This approach also allows the buyer to identify whether an alternate assembly or delivery plan is appropriate if the requested quantity is unavailable.
OPA606KP vs OPA606KM - which is better for a wideband circuit?
OPA606KM is the better fit when its slightly faster ratings are meaningful, because the comparison reports 12.5 MHz gain-bandwidth product and 33 V/µs slew rate versus 12 MHz and 30 V/µs for OPA606KP. However, the package and ordering code must also match the existing PCB before substitution. The OPA606KP remains preferable when its exact 8-pin DIP configuration and documented operating characteristics are required.
What is the difference between OPA606KP and OPA606KM?
OPA606KP is specified at 12 MHz gain-bandwidth product and 30 V/µs slew rate, while OPA606KM is listed at 12.5 MHz and 33 V/µs. The difference is approximately 4.2% in gain-bandwidth product and 10% in slew rate, favoring OPA606KM marginally for bandwidth-limited designs. Pin compatibility, package, supply requirements, and input/output bias must also be checked before treating the devices as interchangeable.
When should I choose OPA606KP over OPA606KM?
Choose OPA606KP when the design uses the 8-pin DIP footprint or requires the exact ordering code and its specified 12 MHz gain-bandwidth product and 30 V/µs slew rate. OPA606KM offers a slightly higher 12.5 MHz bandwidth and 33 V/µs slew rate, but those small improvements may not justify a footprint change. The decisive criteria should be PCB compatibility, rail configuration, stability requirements, and available operating temperature grade.
Is OPA606KP suitable for high-impedance instrumentation?
OPA606KP is suitable for high-impedance instrumentation because its input bias current is 8 pA, which minimizes the voltage error produced when bias current flows through a high source impedance. The Texas Instruments OPA606 datasheet also identifies wide-bandwidth DIFET operation. PCB cleanliness and guarding remain important because board leakage can become significant when the source impedance is extremely high.
What is the best drop-in replacement for OPA606KP?
OPA606KP-3 is the closest identified same-brand drop-in candidate because it belongs to the OPA606 family and retains the 8-pin through-hole format used by OPA606KP. Its exact pinout, grade, and operating limits must be confirmed against the manufacturer datasheet before production use. OPA606KM should not be called a drop-in replacement unless the PCB footprint, pin arrangement, and supply requirements have been verified.
Can OPA606KP-3 replace OPA606KP?
OPA606KP-3 may replace OPA606KP when its 8-pin DIP pinout and electrical limits match the installed circuit, but those details must be confirmed from the manufacturer documentation before substitution. The identified family relationship supports investigating it as a same-brand drop-in option. A valid replacement also needs equivalent supply range, offset behavior, bias current, bandwidth, slew rate, and operating temperature coverage.
Where to download the OPA606KP datasheet PDF?
The OPA606KP datasheet PDF can be downloaded from the Texas Instruments OPA606 document linked on this page, and a manufacturer-hosted copy is also available through the Mouser datasheet address. The document covers the wide-bandwidth DIFET operational amplifier, electrical characteristics, pin configuration, typical applications, and package information. Use the OPA606KP-specific ordering information when applying limits to the DIP variant.
Where can I find the OPA606KP pinout?
The OPA606KP pin assignment is shown in the pin-configuration section of the Texas Instruments OPA606 datasheet. The device uses an 8-pin DIP package, so engineers should verify the exact pin numbers for offset null, inputs, supply rails, output, and compensation before wiring a replacement board. Do not infer pin functions from another amplifier family solely because it also has eight pins.
What is the best cross-brand equivalent for OPA606KP?
The cross-brand OPA606 alternatives identified by the available cross-reference information do not include a part number and package-level electrical data sufficient to prove a drop-in fit. Consequently, no cross-brand equivalent is listed as guaranteed here. An engineer should use the Texas Instruments cross-reference process or the manufacturer datasheet, then require confirmation of the 8-pin footprint, pinout, ±5 V to ±18 V supply operation, bandwidth, slew rate, offset, bias current, and temperature grade.

के लिए इंजीनियरिंग संदर्भ डेटा OPA606KP — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose OPA606KP for legacy through-hole instrumentation, active-filter, buffering, and signal-conditioning designs that need substantially more bandwidth and slew rate than a general-purpose op amp. Its 8 pA input bias current is especially useful with high-impedance sources, while the 13 MHz gain-bandwidth product and 30 V/µs slew rate provide useful signal-integrity margin. OPA606KP-3 is the only clearly identified same-brand family candidate with the same 8-pin through-hole format, but its exact grade and electrical characteristics require confirmation before substitution. OPA606KM may suit a redesign when its slightly higher bandwidth and slew rate are valuable, but it should not be treated as a confirmed drop-in replacement without verifying the footprint and pinout. For low-frequency precision-only designs, a lower-bandwidth general-purpose amplifier may be more appropriate if its input bias current and offset behavior satisfy the source impedance and accuracy requirements.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद OPA606KP-3
Brand Texas Instruments Texas Instruments
Package 8-PDIP 8-PDIP
Amplifier Type Single operational amplifier Single operational amplifier

मुख्य विशेषताएँ

  • Wide-bandwidth performance in a legacy DIP package (बनामOPA606KP-3)
  • Low input bias current supports high-impedance sources (बनामOPA606KM)
  • Higher slew rate preserves large-signal transitions (बनामOPA606KM)

डिज़ाइन नोट्स

Keep the op-amp input, feedback, and gain-setting networks compact. The 8 pA input bias current of the OPA606KP can support high-impedance sources, but PCB contamination and leakage across a sensitive input may still dominate the total error. Use a guarded or well-cleaned input area, avoid long exposed traces, and connect the feedback return directly to the amplifier output to minimize parasitic coupling.

The OPA606KP supports ±5 V to ±18 V operation, giving a 10 V to 36 V total supply range. Decouple each supply rail close to the package with a suitable high-frequency bypass capacitor, and keep the power and ground return paths short. Verify actual input and output swing because rail-adjacent signals, startup behavior, and overload conditions can reduce the usable output range even when the total supply voltage is within specification.

Do not substitute an eight-pin amplifier solely by package count. OPA606KM has slightly different published bandwidth and slew-rate values, and the cross-reference information does not establish that its footprint and pinout match the installed 8-PDIP. Before replacement, compare the power pins, offset-null pins, input pins, output, feedback topology, supply range, stability, and operating temperature requirements from the manufacturer datasheet.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

Compliance status was not established by the cited component pages. AEC-Q100 is marked not applicable because OPA606KP is a general-purpose analog amplifier rather than an automotive-qualified device.

डेटा सत्यापन तिथि: 2026-11-14 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

OPA606KP datasheet OPA606KP pinout OPA606KP datasheet pdf OPA606KP specifications OPA606KP 13MHz OPA606KP 30V/us OPA606KP 8-pin DIP OPA606KP equivalent OPA606KP replacement OPA606KP vs OPA606KM Texas Instruments OPA606KP OPA606KP price OPA606KP application circuit

संबंधित कंपोनेंट्स और शब्द

Texas Instruments OPA606KP OPA606KP-3 OPA606KM operational amplifier instrumentation amplifier precision analog IC DIFET semiconductor gain-bandwidth product slew rate input bias current input offset voltage 8-PDIP DIP package family through-hole package surface-mount alternative active filter signal conditioning laboratory instrumentation high-impedance source data acquisition wideband buffer negative feedback
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें