STMicroelectronics

STM32L063C8T6 - 32MHz Cortex-M0+ MCU | STMicroelectronics

MPN: STM32L063C8T6 ✓ सक्रिय
1.65 V to 3.6 V Vdss 48-LQFP (7 x 7 mm) Package 32 MHz Speed 64 KB (64K x 8) Memory
न्यूनतम ऑर्डर मात्रा: 1 |

STM32L063C8T6 अवलोकन

STMicroelectronics STM32L063C8T6 is an ultra-low-power 32-bit Arm Cortex-M0+ microcontroller operating at 32 MHz, with 64 KB of embedded Flash, 8 KB of SRAM, and USB 2.0 crystal-less connectivity in a 48-LQFP 7 x 7 mm package. It accepts a 1.65 V to 3.6 V supply voltage and supports operation from -40°C to +85°C, making it suited to compact, low-power embedded systems that need USB, moderate processing performance, and a conventional leaded surface-mount footprint.

An ultra-low-power microcontroller is a semiconductor device optimized to minimize energy consumption during active processing, standby operation, and wake-up transitions. The STM32L0 family belongs to the Arm Cortex-M microcontroller hierarchy and combines a general-purpose CPU core with embedded Flash, SRAM, analog and digital peripherals, clock control, communications interfaces, and low-power management in one integrated device.

Principal features include 64 KB of Flash organized as 64K x 8 bits, 8 KB of SRAM, and a 2 KB EEPROM indicated by the device specifications. The MCU provides a 32-bit Arm Cortex-M0+ core, a 12-bit ADC, USB 2.0 support, hardware AES capability, and LCD-oriented connectivity. These resources support compact USB-connected products while keeping the device useful for control, sensing, communications, and human-interface functions that do not require a higher-performance Cortex-M core.

The 32 MHz Cortex-M0+ architecture provides a balance between processing throughput and low-power operation. Embedded Flash permits firmware and data to reside within the same package, while 8 KB of SRAM supports stack space, working variables, USB buffers, and peripheral data handling. The 1.65 V to 3.6 V operating range supports integration into 3.3 V systems, although designers should not infer that every external peripheral can safely operate from the lower end of the supply range without checking individual device requirements.

Typical uses include industrial control modules, consumer accessories, motor-driver controllers, USB-connected sensing products, and OEM or EMS controller boards. The LQFP-48 package exposes more I/O than compact QFN alternatives and is easier to inspect or rework during prototype assembly. USB connectivity can simplify direct host or peripheral interfaces, while AES support is useful for devices handling protected control or communication data.

The primary design consideration is careful power and signal planning around a 3.3 V low-power system. Keep decoupling close to supply pins, route high-current USB and motor outputs away from sensitive analog inputs, and use the manufacturer pin-description and application guidance when assigning the 48 package pins. Prototype designs also benefit from exposed test points for debugging, bootloader access, and brownout behavior.

This product overview consolidates the manufacturer device description, distributor specifications, package information, sourcing constraints, replacement considerations, and practical integration guidance into a design-focused reference. It also highlights where engineers must verify pin assignments, electrical limits, and ordering information before releasing a PCB or changing the MCU in an existing design.

के लिए ड्रॉप-इन विकल्प STM32L063C8T6 — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं STM32L063C8T6 (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package, RoHS Status.

STMicroelectronics
Package: LQFP-48
RoHS Status: Compliant
इसके साथ तुलना करें STM32L063C8T6 →

STM32L063C8T7

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
📦 48-LQFP (7 x 7 mm)
Ordering-temperature suffix differs; nominal CPU frequency remains 32 MHz, Flash remains 64 KB, and SRAM remains 8 KB, for a 0 MHz and 0 KB nominal memory difference.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

STM32L053C8T6

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
STMicroelectronics
📦 48-LQFP (7 x 7 mm)
ARM Cortex-M0+ · 32 MHz · 64 KB · 8 KB · 1.8 V to 3.6 V · LQFP-48 · -40°C to +85°C · 12-bit, 16 channels

कीमत के लिए संपर्क करें

डेटाशीट देखें →

STM32L071C8T6

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
STMicroelectronics
📦 48-LQFP (7 x 7 mm)
Arm Cortex-M0+ (32-bit RISC) · 32 MHz · 64 KB (64K x 8) · 20 KB · 48-LQFP (7 x 7 mm) · 2.5 V / 3.3 V · STM32L0 access line (ultra-low-power) · 32-bit

कीमत के लिए संपर्क करें

डेटाशीट देखें →

STM32L151C8T6TR

✅ ड्रॉप-इन
📦 48-LQFP (7 x 7 mm)
STM32L1-family resources replace the STM32L0 configuration; the listed comparison identifies a 32-bit 64 KB MCU in 48-LQFP, with a 0 KB nominal Flash difference.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

STM32L063C8T6 Maximum Ratings और Electrical Characteristics

CPU Architecture Arm Cortex-M0+
CPU Bit Width 32 bit
Maximum CPU Frequency 32 MHz
Embedded Flash 64 KB (64K x 8)
SRAM 8 KB
EEPROM 2 KB
ADC Resolution 12 bit
ADC Architecture 12-bit ADC
Supply Voltage Range 1.65 V to 3.6 V
ऑपरेटिंग तापमान रेंज -40°C to +85°C
USB Version USB 2.0 crystal-less
Hardware Encryption AES
LCD Support LCD support
पैकेज 48-LQFP (7 x 7 mm)
Package Pin Count 48 pins
माउंटिंग प्रकार Surface mount
RoHS स्थिति RoHS

STM32L063C8T6 48 pins पिन कॉन्फ़िगरेशन गाइड

STM32L063C8T6 (48 pins पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।

STM32L063C8T6 के लिए 48 pins पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: STM32L063C8T6.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

STM32L063C8T6 के लिए उपयुक्त है 6 अनुप्रयोगs: USB-connected sensing devices, Industrial control modules, Motor-driver control electronics, Consumer USB accessories, Battery-operated embedded products, OEM and EMS controller boards.

🧩

USB-connected sensing devices

The STM32L063C8T6 fits compact USB sensors because it combines a 32 MHz Arm Cortex-M0+ core, 64 KB of Flash, 8 KB of SRAM, and USB 2.0 crystal-less connectivity in one 48-LQFP device. A sensor node can use the 12-bit ADC for analog measurements while the MCU handles configuration, data conditioning, and USB communication. The 1.65 V to 3.6 V operating range supports low-voltage designs, although the USB transceiver, connector, and powered sensors must share a carefully planned 3.3 V power architecture.

🏭

Industrial control modules

The STM32L063C8T6 is appropriate for small industrial controller modules requiring deterministic embedded control, local data processing, and flexible communications. Its 32 MHz Cortex-M0+ core and 64 KB of Flash are sufficient for supervisory logic, parameter handling, and protocol tasks, while the 12-bit ADC supports process-input acquisition. The -40°C to +85°C range provides useful environmental coverage for industrial equipment, but isolated signal interfaces, surge protection, grounding, and safe power-loss behavior must be designed separately.

⚡

Motor-driver control electronics

The STM32L063C8T6 can serve as the logic controller in a low-voltage motor-driver board. It can process position or current inputs, run motor-control state machines, and manage communications while an external bridge or power stage handles the motor current. The 32 MHz core provides useful control bandwidth, and 64 KB of Flash accommodates firmware for sequencing, calibration, and diagnostics. Motor traces must remain separated from sensitive ADC and clock paths, while the MCU requires stable local regulation and careful grounding.

📱

Consumer USB accessories

The STM32L063C8T6 is useful in compact consumer accessories that need USB connectivity without a high-performance application processor. A configuration tool, HID controller, interface adapter, or programmable accessory can use the 32 MHz Cortex-M0+ core and 8 KB of SRAM for protocol handling and local state. Its 1.65 V to 3.6 V supply range integrates readily into a 3.3 V design, while USB bus protection, connector mechanics, firmware updates, and electromagnetic compatibility remain board-level responsibilities.

🔋

Battery-operated embedded products

The STM32L063C8T6 belongs to an ultra-low-power MCU family and is suitable for battery-operated products that periodically wake to measure or communicate data. The 32 MHz Cortex-M0+ core handles active processing, while low-power operating modes can reduce consumption between events. With 64 KB of Flash and 8 KB of SRAM, the device can support compact control logic without external memory. Battery life still depends on the selected mode, wake-up source, sensor load, regulator efficiency, USB activity, and board leakage rather than on the MCU name alone.

🖥️

OEM and EMS controller boards

The STM32L063C8T6 suits OEM and EMS controller boards that require a stable, widely supported MCU architecture and inspectable LQFP assembly. Its 48-LQFP 7 x 7 mm package exposes 48 connections and avoids the rework complexity of a leadless QFN during low-volume manufacturing. The 64 KB of embedded Flash supports standalone firmware, and the 12-bit ADC and USB interface add useful control and connectivity options. Production designs should still verify the exact pin table, programming procedure, boot configuration, and assembly handling requirements.

What are the key specifications of STM32L063C8T6 that engineers should know?
The STM32L063C8T6 combines a 32 MHz Arm Cortex-M0+ core, 64 KB of Flash, 8 KB of SRAM, and USB 2.0 crystal-less connectivity. According to the STMicroelectronics device page, it operates from 1.65 V to 3.6 V, supports a -40°C to +85°C temperature range, and includes a 12-bit ADC and AES hardware capability. The device is packaged in a 48-LQFP 7 x 7 mm package for compact embedded, industrial, consumer, motor-control, and USB-connected designs.
What is the operating voltage of STM32L063C8T6?
The STM32L063C8T6 operates from 1.65 V to 3.6 V. According to the STMicroelectronics STM32L063x8 product page, this range supports low-voltage embedded systems where the MCU must combine USB connectivity with low-power operation. A 3.3 V supply is within the device range, but the complete circuit should be checked against each peripheral's voltage tolerance, decoupling requirements, and maximum operating frequency.
Where can I download the STM32L063C8T6 datasheet PDF?
The official STM32L063C8T6 documentation is available from the STMicroelectronics STM32L063C8 product page at https://www.st.com/en/microcontrollers-microprocessors/stm32l063c8.html. The manufacturer documentation is the authoritative source for the electrical characteristics, 48-pin assignment, memory map, clock tree, USB implementation, and recommended application circuitry. Use the pin-description and connection tables when assigning PCB functions or reviewing a design.
Where can I find the STM32L063C8T6 pinout?
The STM32L063C8T6 pinout is defined in the manufacturer documentation for the 48-LQFP 7 x 7 mm package. Because the complete pin description table is not reproduced on this page, use the STM32L063C8 datasheet and package drawing when assigning tracks. In particular, verify power, ground, reset, boot, debug, clock, USB, and peripheral multiplexing functions before releasing the PCB layout.
How much Flash and SRAM does the STM32L063C8T6 contain?
The STM32L063C8T6 provides 64 KB of embedded Flash, 8 KB of SRAM, and a 2 KB EEPROM. According to the STMicroelectronics product description and distributor specifications, the Flash is organized as 64K x 8 bits. This memory combination is suitable for compact control firmware, USB-connected peripherals, protocol handling, and applications that need to retain calibration or configuration information without adding a separate external memory device.
Is STM32L063C8T6 suitable for USB-connected embedded devices?
The STM32L063C8T6 is suitable for USB-connected embedded devices because it includes USB 2.0 crystal-less connectivity. According to the STMicroelectronics STM32L063x8 family description, the interface reduces the need for an external crystal when its operating conditions are satisfied. The MCU also offers 8 KB of SRAM and a 32 MHz Cortex-M0+ core, allowing firmware, USB data handling, and control functions to be consolidated in a 48-LQFP package.
What is the difference between STM32L063C8T6 and STM32L151C8T6TR?
The STM32L063C8T6 is the lower-power STM32L0-family choice, while the STM32L151C8T6TR belongs to the STM32L1 family and is intended to provide additional performance and resources for more demanding designs. Both are identified as 48-LQFP devices with 64 KB of Flash and a 32-bit architecture. Existing boards should still be checked for peripheral mapping, supply behavior, firmware support, and exact pin compatibility before substitution.
When should I choose STM32L063C8T6 over STM32L151C8T6TR?
Choose the STM32L063C8T6 when low-power operation, a 32 MHz Arm Cortex-M0+ core, USB connectivity, 64 KB of Flash, and a compact 48-LQFP footprint are the principal requirements. Choose the STM32L151C8T6TR when the design needs the additional capabilities of the STM32L1 family. According to the STMicroelectronics device pages, both families offer 64 KB of Flash, but they are positioned for different performance and resource requirements.
Is STM32L063C8T6 suitable for industrial control and motor-driver boards?
The STM32L063C8T6 is suitable for many industrial control, motor-driver, and OEM controller designs. Its -40°C to +85°C operating range, 1.65 V to 3.6 V supply range, 12-bit ADC, and 64 KB of Flash support compact sensing and control functions. For motor applications, the MCU can manage control logic and communications while external power stages handle the motor current, provided the board layout preserves signal and power integrity.
What is the best drop-in replacement for STM32L063C8T6?
The closest same-footprint STM32 alternatives are STM32L063C8T7, STM32L053C8T6, STM32L071C8T6, and STM32L151C8T6TR, but none should be treated as an automatic substitute without engineering review. Package size and nominal memory or clock similarities do not alone guarantee pin, peripheral, USB, bootloader, and firmware compatibility. Use the manufacturer datasheets to compare the complete 48-pin tables and confirm the ordering, supply, temperature, and software requirements.
Can STM32L063C8T7 replace STM32L063C8T6?
STM32L063C8T7 is the closest same-series candidate because it retains the STM32L063C8 architecture and 48-LQFP footprint while changing the ordering-temperature suffix. The nominal core frequency and Flash capacity remain aligned with the STM32L063C8T6. Confirm the exact temperature grade, pin multiplexing, USB configuration, and device marking in the STMicroelectronics ordering information before using it as a production replacement.
What is the best STMicroelectronics equivalent for STM32L063C8T6?
The best STMicroelectronics equivalent depends on which constraint must remain unchanged. STM32L063C8T7 is the closest same-series option, STM32L053C8T6 omits the USB feature, and STM32L071C8T6 represents a different STM32L0 resource configuration. According to the STM32L063x8 product family information, the target includes USB 2.0 crystal-less connectivity, making preservation of USB behavior a key requirement when selecting a replacement.
Where can I buy STM32L063C8T6 online?
Use the Request a Quote form on this page to request STM32L063C8T6 availability, current pricing, order quantity, and lead time. The manufacturer product page, authorized distribution listings, and the part-specific commerce links on this page can also confirm ordering information. Confirm the exact ordering code STM32L063C8T6, the 48-LQFP package, delivery format, and production quantity before placing an order.
What is the price of STM32L063C8T6?
The current unit price and available quantity should be requested through the Request a Quote form on this page. Market pricing can change with order size, inventory, package format, and delivery terms, so a static quotation may not represent the available configuration. Include the target ordering code STM32L063C8T6, required quantity, ship-to region, and preferred delivery format when requesting the current commercial offer.
What is the lead time and stock status for STM32L063C8T6?
Use the Request a Quote form on this page for current stock, minimum order quantity, production allocation, and lead time. The STMicroelectronics product page and the part-specific commerce links are appropriate places to verify ordering status, while a quotation confirms the date and quantity on which XAIPART can commit. Avoid assuming that general market availability means the exact STM32L063C8T6 ordering code and package format are immediately ready to ship.

के लिए इंजीनियरिंग संदर्भ डेटा STM32L063C8T6 — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the STM32L063C8T6 for compact, low-power products that need a 32 MHz Arm Cortex-M0+ core, 64 KB of Flash, 8 KB of SRAM, USB 2.0 crystal-less connectivity, a 12-bit ADC, and a 48-LQFP footprint. Select STM32L063C8T7 when its temperature ordering grade is acceptable and the same-series configuration is otherwise retained. Consider STM32L053C8T6 only when USB is unnecessary. Evaluate STM32L071C8T6 when its additional STM32L0 resources fit the design, and review STM32L151C8T6TR when the higher STM32L1 resource tier justifies a firmware and electrical review. For every substitution, compare the complete pin table, USB implementation, peripheral mapping, boot configuration, memory map, clock tree, temperature grade, and package drawing.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद STM32L063C8T7 STM32L053C8T6 STM32L071C8T6 STM32L151C8T6TR
Manufacturer STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Package 48-LQFP (7 x 7 mm) 48-LQFP (7 x 7 mm) 48-LQFP (7 x 7 mm) 48-LQFP (7 x 7 mm) 48-LQFP
CPU Architecture Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+
Maximum CPU Frequency 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz
Embedded Flash 64 KB 64 KB 64 KB 64 KB 64 KB
SRAM 8 KB 8 KB 8 KB 8 KB 8 KB
Supply Voltage Range 1.65 V to 3.6 V 1.65 V to 3.6 V 1.65 V to 3.6 V 1.65 V to 3.6 V 1.65 V to 3.6 V
USB Connectivity USB 2.0 crystal-less USB 2.0 crystal-less No USB 2.0 crystal-less connectivity USB connectivity requires configuration verification USB connectivity requires configuration verification
ADC Resolution 12 bit 12 bit 12 bit 12 bit 12 bit

मुख्य विशेषताएँ

  • Combines crystal-less USB with an ultra-low-power Cortex-M0+ platform (बनामSTM32L053C8T6)
  • Closest same-series ordering variant (बनामSTM32L063C8T7)
  • Lower-power family positioning for compact embedded systems (बनामSTM32L151C8T6TR)

डिज़ाइन नोट्स

Use the manufacturer supply recommendations for decoupling and regulator selection. Keep the MCU's local supply traces short, connect the required supply and ground pins directly to the planes, and avoid sharing narrow supply paths with motor, relay, or USB-switching loads. The stated 1.65 V to 3.6 V operating range is not permission to run every attached peripheral at 1.65 V; verify each component's electrical limits independently.

Route USB, clock, and reset signals with short paths and continuous reference planes, while separating motor-drive current paths from the 12-bit ADC and MCU ground pins. Place input bypass capacitors close to their corresponding package pins and provide accessible test pads for supply, ground, reset, boot mode, debug signals, and USB. The 48-LQFP footprint is inspectable, but a complete pin assignment must still be checked against the manufacturer package drawing.

Do not treat the STM32L0 family suffix or a matching 48-LQFP outline as proof of interchangeability. Before replacing the STM32L063C8T6, compare USB support, pin multiplexing, clock requirements, boot behavior, firmware device identifiers, peripheral instances, temperature grade, and supply limits. Changing to a different family can require firmware, bootloader, and hardware modifications even when the package drawing appears identical.

Preserve clean references for sensitive analog and digital signals, especially when the 12-bit ADC is used near switching or motor-control circuitry. Keep analog inputs away from high-current edges, use a continuous ground reference, and apply filtering according to the measured signal bandwidth rather than relying only on nominal ADC resolution. USB differential routing should follow the manufacturer's reference layout and connector recommendations.

अनुपालन जानकारी

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The component listing identifies RoHS status. Other compliance attributes and automotive qualification are not stated for this ordering code.

डेटा सत्यापन तिथि: 2026-11-14 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

STM32L063C8T6 datasheet STM32L063C8T6 pinout STM32L063C8T6 datasheet pdf STM32L063C8T6 specifications STM32L063C8T6 equivalent STM32L063C8T6 replacement STM32L063C8T6 price STM32L063C8T6 stock STMicroelectronics STM32L063C8T6 STM32L063C8T6 32MHz 64KB STM32L063C8T6 LQFP-48 STM32L063C8T6 USB microcontroller STM32L063C8T6 vs STM32L151C8T6TR

संबंधित कंपोनेंट्स और शब्द

STMicroelectronics STM32L063C8T6 STM32L063C8T7 STM32L053C8T6 STM32L071C8T6 STM32L151C8T6TR STM32L0 microcontroller Arm Cortex-M0+ 32-bit microcontroller ultra-low-power microcontroller embedded Flash SRAM EEPROM USB 2.0 crystal-less USB 12-bit ADC AES hardware encryption 48-LQFP LQFP package family surface mount 1.65 V to 3.6 V 32 MHz 64 KB Flash industrial control motor-driver controller
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें