STM32L063C8T6 - 32MHz Cortex-M0+ MCU | STMicroelectronics
MPN: STM32L063C8T6 ✓ AktifSTM32L063C8T6 Genel Bakış
An ultra-low-power microcontroller is a semiconductor device optimized to minimize energy consumption during active processing, standby operation, and wake-up transitions. The STM32L0 family belongs to the Arm Cortex-M microcontroller hierarchy and combines a general-purpose CPU core with embedded Flash, SRAM, analog and digital peripherals, clock control, communications interfaces, and low-power management in one integrated device.
Principal features include 64 KB of Flash organized as 64K x 8 bits, 8 KB of SRAM, and a 2 KB EEPROM indicated by the device specifications. The MCU provides a 32-bit Arm Cortex-M0+ core, a 12-bit ADC, USB 2.0 support, hardware AES capability, and LCD-oriented connectivity. These resources support compact USB-connected products while keeping the device useful for control, sensing, communications, and human-interface functions that do not require a higher-performance Cortex-M core.
The 32 MHz Cortex-M0+ architecture provides a balance between processing throughput and low-power operation. Embedded Flash permits firmware and data to reside within the same package, while 8 KB of SRAM supports stack space, working variables, USB buffers, and peripheral data handling. The 1.65 V to 3.6 V operating range supports integration into 3.3 V systems, although designers should not infer that every external peripheral can safely operate from the lower end of the supply range without checking individual device requirements.
Typical uses include industrial control modules, consumer accessories, motor-driver controllers, USB-connected sensing products, and OEM or EMS controller boards. The LQFP-48 package exposes more I/O than compact QFN alternatives and is easier to inspect or rework during prototype assembly. USB connectivity can simplify direct host or peripheral interfaces, while AES support is useful for devices handling protected control or communication data.
The primary design consideration is careful power and signal planning around a 3.3 V low-power system. Keep decoupling close to supply pins, route high-current USB and motor outputs away from sensitive analog inputs, and use the manufacturer pin-description and application guidance when assigning the 48 package pins. Prototype designs also benefit from exposed test points for debugging, bootloader access, and brownout behavior.
This product overview consolidates the manufacturer device description, distributor specifications, package information, sourcing constraints, replacement considerations, and practical integration guidance into a design-focused reference. It also highlights where engineers must verify pin assignments, electrical limits, and ordering information before releasing a PCB or changing the MCU in an existing design.
Drop-in alternatifler için STM32L063C8T6 — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller STM32L063C8T6 (aynı form faktörü ve ayağa oturma) — farklı olan Package, RoHS Status.
STM32L063C8T7
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
STM32L053C8T6
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →STM32L071C8T6
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →STM32L151C8T6TR
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
STM32L063C8T6 Maksimum Değerlendirmeler & Elektriksel Özellikler
| CPU Architecture | Arm Cortex-M0+ |
| CPU Bit Width | 32 bit |
| Maximum CPU Frequency | 32 MHz |
| Embedded Flash | 64 KB (64K x 8) |
| SRAM | 8 KB |
| EEPROM | 2 KB |
| ADC Resolution | 12 bit |
| ADC Architecture | 12-bit ADC |
| Supply Voltage Range | 1.65 V to 3.6 V |
| İşletim Sıcaklığı Aralığı | -40°C to +85°C |
| USB Version | USB 2.0 crystal-less |
| Hardware Encryption | AES |
| LCD Support | LCD support |
| Paket | 48-LQFP (7 x 7 mm) |
| Package Pin Count | 48 pins |
| Montaj Türü | Surface mount |
| RoHS Durumu | RoHS |
STM32L063C8T6 48 pins Pin Yapısı Kılavuzu
STM32L063C8T6 (48 pins paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: STM32L063C8T6.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
STM32L063C8T6 için uygundur 6 uygulamas: USB-connected sensing devices, Industrial control modules, Motor-driver control electronics, Consumer USB accessories, Battery-operated embedded products, OEM and EMS controller boards.
USB-connected sensing devices
The STM32L063C8T6 fits compact USB sensors because it combines a 32 MHz Arm Cortex-M0+ core, 64 KB of Flash, 8 KB of SRAM, and USB 2.0 crystal-less connectivity in one 48-LQFP device. A sensor node can use the 12-bit ADC for analog measurements while the MCU handles configuration, data conditioning, and USB communication. The 1.65 V to 3.6 V operating range supports low-voltage designs, although the USB transceiver, connector, and powered sensors must share a carefully planned 3.3 V power architecture.
Önerilen
Industrial control modules
The STM32L063C8T6 is appropriate for small industrial controller modules requiring deterministic embedded control, local data processing, and flexible communications. Its 32 MHz Cortex-M0+ core and 64 KB of Flash are sufficient for supervisory logic, parameter handling, and protocol tasks, while the 12-bit ADC supports process-input acquisition. The -40°C to +85°C range provides useful environmental coverage for industrial equipment, but isolated signal interfaces, surge protection, grounding, and safe power-loss behavior must be designed separately.
Önerilen
Motor-driver control electronics
The STM32L063C8T6 can serve as the logic controller in a low-voltage motor-driver board. It can process position or current inputs, run motor-control state machines, and manage communications while an external bridge or power stage handles the motor current. The 32 MHz core provides useful control bandwidth, and 64 KB of Flash accommodates firmware for sequencing, calibration, and diagnostics. Motor traces must remain separated from sensitive ADC and clock paths, while the MCU requires stable local regulation and careful grounding.
Önerilen
Consumer USB accessories
The STM32L063C8T6 is useful in compact consumer accessories that need USB connectivity without a high-performance application processor. A configuration tool, HID controller, interface adapter, or programmable accessory can use the 32 MHz Cortex-M0+ core and 8 KB of SRAM for protocol handling and local state. Its 1.65 V to 3.6 V supply range integrates readily into a 3.3 V design, while USB bus protection, connector mechanics, firmware updates, and electromagnetic compatibility remain board-level responsibilities.
Önerilen
Battery-operated embedded products
The STM32L063C8T6 belongs to an ultra-low-power MCU family and is suitable for battery-operated products that periodically wake to measure or communicate data. The 32 MHz Cortex-M0+ core handles active processing, while low-power operating modes can reduce consumption between events. With 64 KB of Flash and 8 KB of SRAM, the device can support compact control logic without external memory. Battery life still depends on the selected mode, wake-up source, sensor load, regulator efficiency, USB activity, and board leakage rather than on the MCU name alone.
Önerilen
OEM and EMS controller boards
The STM32L063C8T6 suits OEM and EMS controller boards that require a stable, widely supported MCU architecture and inspectable LQFP assembly. Its 48-LQFP 7 x 7 mm package exposes 48 connections and avoids the rework complexity of a leadless QFN during low-volume manufacturing. The 64 KB of embedded Flash supports standalone firmware, and the 12-bit ADC and USB interface add useful control and connectivity options. Production designs should still verify the exact pin table, programming procedure, boot configuration, and assembly handling requirements.
Önerilen
Mühendislik referans verileri: STM32L063C8T6 — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | STM32L063C8T7 | STM32L053C8T6 | STM32L071C8T6 | STM32L151C8T6TR |
|---|---|---|---|---|---|
| Manufacturer | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) | 48-LQFP |
| CPU Architecture | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Embedded Flash | 64 KB | 64 KB | 64 KB | 64 KB | 64 KB |
| SRAM | 8 KB | 8 KB | 8 KB | 8 KB | 8 KB |
| Supply Voltage Range | 1.65 V to 3.6 V | 1.65 V to 3.6 V | 1.65 V to 3.6 V | 1.65 V to 3.6 V | 1.65 V to 3.6 V |
| USB Connectivity | USB 2.0 crystal-less | USB 2.0 crystal-less | No USB 2.0 crystal-less connectivity | USB connectivity requires configuration verification | USB connectivity requires configuration verification |
| ADC Resolution | 12 bit | 12 bit | 12 bit | 12 bit | 12 bit |
Ana Farklılayıcılar
- Combines crystal-less USB with an ultra-low-power Cortex-M0+ platform (karşılaştırma:STM32L053C8T6)
- Closest same-series ordering variant (karşılaştırma:STM32L063C8T7)
- Lower-power family positioning for compact embedded systems (karşılaştırma:STM32L151C8T6TR)
Tasarım Notları
Use the manufacturer supply recommendations for decoupling and regulator selection. Keep the MCU's local supply traces short, connect the required supply and ground pins directly to the planes, and avoid sharing narrow supply paths with motor, relay, or USB-switching loads. The stated 1.65 V to 3.6 V operating range is not permission to run every attached peripheral at 1.65 V; verify each component's electrical limits independently.
Route USB, clock, and reset signals with short paths and continuous reference planes, while separating motor-drive current paths from the 12-bit ADC and MCU ground pins. Place input bypass capacitors close to their corresponding package pins and provide accessible test pads for supply, ground, reset, boot mode, debug signals, and USB. The 48-LQFP footprint is inspectable, but a complete pin assignment must still be checked against the manufacturer package drawing.
Do not treat the STM32L0 family suffix or a matching 48-LQFP outline as proof of interchangeability. Before replacing the STM32L063C8T6, compare USB support, pin multiplexing, clock requirements, boot behavior, firmware device identifiers, peripheral instances, temperature grade, and supply limits. Changing to a different family can require firmware, bootloader, and hardware modifications even when the package drawing appears identical.
Preserve clean references for sensitive analog and digital signals, especially when the 12-bit ADC is used near switching or motor-control circuitry. Keep analog inputs away from high-current edges, use a continuous ground reference, and apply filtering according to the measured signal bandwidth rather than relying only on nominal ADC resolution. USB differential routing should follow the manufacturer's reference layout and connector recommendations.
Uyumluluk Bilgisi
The component listing identifies RoHS status. Other compliance attributes and automotive qualification are not stated for this ordering code.