STM32L4R7VIT6 - 120MHz Cortex-M4 MCU, 2MB Flash | STMicroelectronics
MPN: STM32L4R7VIT6 ✓ सक्रियSTM32L4R7VIT6 अवलोकन
A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces onto one package. In the product hierarchy, the STM32L4R7VIT6 is an Arm Cortex-M4 MCU within the STM32L4+ Series, combining general-purpose embedded processing with energy-conscious operation. Its 32-bit architecture makes it suitable for compact control systems that require more processing capability than an 8- or 16-bit MCU while retaining integrated flash, RAM, and peripheral resources.
The principal features of the STM32L4R7VIT6 include a 120 MHz Cortex-M4 core, 2 MB of embedded Flash, 640 KB of SRAM, and 83 GPIO. The Arm Cortex-M4 processor includes floating-point capability for control calculations, while the large SRAM supports data buffering and application state. USB OTG provides a USB interface for data exchange or device connectivity, and the DFSD peripheral supports dedicated flash-storage access.
Its operating-supply options include 1.8 V, 2.5 V, and 3.3 V rails, allowing integration with systems using common embedded voltage levels. The 100-LQFP package exposes a substantially larger pin count than small-outline packages, supporting numerous general-purpose and application-specific connections while remaining compatible with conventional leaded assembly methods. The STM32L4R7 family is positioned for connected, low-power embedded products where flash capacity, SRAM, USB, and digital I/O must coexist in one device.
Typical uses include industrial sensor controllers, portable measurement equipment, USB-connected data-acquisition units, DFSD-based data loggers, building automation endpoints, and compact control boards. The 83 available I/O can connect sensors, displays, communications transceivers, actuators, and discrete inputs without requiring a large number of external interface components.
Designers should plan the PCB around the 100-LQFP footprint, assign pins according to the manufacturer pin-description table, and preserve the required decoupling and routing geometry. The 1.8 V, 2.5 V, and 3.3 V supply options must be matched to the selected internal regulator and clock configuration. Firmware should also validate USB suspend behavior, DFSD timing, peripheral pin reassignment, and the memory map before production.
This product record combines the manufacturer's family overview with distributor technical summaries and organizes the information for engineering selection. It highlights the core, memory, package, interface, and supply information that determine whether the STM32L4R7VIT6 fits a connected embedded design.
के लिए ड्रॉप-इन विकल्प STM32L4R7VIT6 — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं STM32L4R7VIT6 (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package, Maximum Clock Frequency, Program Memory (Flash), VBAT Mode Current, RoHS Status.
STM32L4R7VIH6
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
STM32L4R9VIT6
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापितकीमत के लिए संपर्क करें
डेटाशीट देखें →STM32L4R5VIT6
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापितकीमत के लिए संपर्क करें
डेटाशीट देखें →STM32L4R5VIH6
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
STM32L4R9VIH6
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
STM32L4R7VIT6 Maximum Ratings और Electrical Characteristics
| Product Type | 32-bit ARM Cortex-M4 microcontroller |
| Processor Core | Arm Cortex-M4, 32 bit |
| Maximum CPU Frequency | 120 MHz |
| Flash Memory | 2 MB |
| Flash Organization | 2M × 8 bit |
| SRAM | 640 KB |
| Number of I/O | 83 GPIO |
| Operating Supply Voltage Options | 1.8 V, 2.5 V, or 3.3 V |
| USB Interface | USB OTG |
| Dedicated Flash Storage Interface | DFSD |
| FPU | Arm Cortex-M4 floating-point unit |
| पैकेज | 100-LQFP |
| Package Body Size | 14 mm × 14 mm |
| पिन काउंट | 100 pins |
| माउंटिंग स्टाइल | Tray |
| Series | STM32L4+ Series |
| RoHS स्थिति | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_qualified |
STM32L4R7VIT6 14 mm × 14 mm पिन कॉन्फ़िगरेशन गाइड
STM32L4R7VIT6 (14 mm × 14 mm पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: STM32L4R7VIT6.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
STM32L4R7VIT6 के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Sensor and Condition Monitoring, USB-Connected Measurement Equipment, DFSD Data Logging, Building Automation Endpoint, Portable Medical and Wellness Device, Compact Human-Machine Interface Controller.
Industrial Sensor and Condition Monitoring
The STM32L4R7VIT6 fits industrial monitoring controllers that must combine many sensor inputs with local processing and low-power behavior. Its 83 GPIO can connect digital sensors, alarm inputs, status indicators, and actuator outputs, while the 120 MHz Arm Cortex-M4 core supports filtering and control calculations. The 640 KB SRAM provides useful working space for sampled data and control state. Its 1.8 V, 2.5 V, or 3.3 V supply choices support multiple industrial board architectures. Design the analog front end separately, validate logic thresholds against the selected supply configuration, and use the manufacturer pin table when assigning communication and debug functions.
अनुशंसित
USB-Connected Measurement Equipment
The STM32L4R7VIT6 is suitable for USB-connected instruments that need more computation and memory than a basic microcontroller provides. USB OTG supports device communication, while the Cortex-M4 processor handles measurement control and data preparation. The 2 MB Flash can retain firmware, calibration tables, and configuration data, and 640 KB of SRAM can buffer samples before USB transfer. The 100-LQFP package also provides a broad selection of general-purpose and alternate-function pins for sensor interfaces, displays, and status controls. Firmware should implement USB enumeration, suspend and resume behavior, and a practical transfer-buffer strategy.
अनुशंसित
DFSD Data Logging
The STM32L4R7VIT6 can serve as the controller in a local data-logging product that combines continuous sampling with dedicated flash-storage access. The DFSD interface provides a dedicated path for flash-storage data movement, while the 120 MHz Cortex-M4 core performs acquisition sequencing and data preparation. Internal Flash can hold firmware and configuration, and 640 KB of SRAM can support staging buffers before writes are committed to storage. A production design should include write-protect handling, power-loss recovery, wear management, and a mechanism for validating stored records. Storage-device electrical and timing requirements should follow the manufacturer guidance.
अनुशंसित
Building Automation Endpoint
The STM32L4R7VIT6 is appropriate for building-automation endpoints that consolidate sensing, local logic, and wired or wireless communication interfaces. Its 83 GPIO can handle digital inputs, relay outputs, and bus transceivers, while 640 KB of SRAM allows protocol buffering and application state. The low-power STM32L4+ platform is useful in equipment that spends substantial time idle between control updates. Choose the 1.8 V, 2.5 V, or 3.3 V operating option to match the board power architecture, and confirm alternate-function assignments in the pin table before routing communication signals. Production firmware should also include watchdog, brownout, and communication recovery behavior.
अनुशंसित
Portable Medical and Wellness Device
The STM32L4R7VIT6 can serve as the central controller in a portable wellness or diagnostic accessory that combines sensor acquisition, local processing, and USB connectivity. The Cortex-M4 floating-point capability supports numerical workloads, while 640 KB of SRAM is useful for signal buffers and application state. The 2 MB Flash capacity can hold control firmware and configuration information. Because medical designs can involve strict safety and regulatory requirements, this general-purpose MCU should be selected only after the complete electrical, lifecycle, and validation requirements are reviewed. Firmware should include sensor-data integrity checks, safe fault states, and controlled USB reconnection.
अनुशंसित
Compact Human-Machine Interface Controller
The STM32L4R7VIT6 fits compact controllers that combine a display interface, buttons, indicators, communications, and embedded control logic. Its 83 GPIO provides substantial connectivity for display commands, encoders, touch inputs, and status LEDs, while the 120 MHz core supports responsive interface updates. The internal 2 MB Flash and 640 KB SRAM reduce reliance on external memory for typical control products. Use the manufacturer alternate-function table to allocate pins for display, communication, and debug functions, and reserve adequate routing space for the 100-LQFP footprint. The final design should verify power sequencing, signal levels, and firmware timing against the selected display and communication interfaces.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा STM32L4R7VIT6 — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद |
|---|---|
| Brand | STMicroelectronics |
| Package | 100-LQFP, 14 mm × 14 mm |
| Processor Core | Arm Cortex-M4, 32 bit |
| Maximum CPU Frequency | 120 MHz |
| Flash Memory | 2 MB |
| SRAM | 640 KB |
| Number of I/O | 83 GPIO |
| Operating Supply Voltage Options | 1.8 V, 2.5 V, or 3.3 V |
| USB Interface | USB OTG |
| Dedicated Flash Storage Interface | DFSD |
मुख्य विशेषताएँ
- Large embedded memory for a compact controller (बनामSTM32L4R5VIT6)
- Extensive integrated I/O (बनामSTM32L4R7VIT6 in a 48-pin package)
- USB and dedicated flash-storage integration (बनामSTM32L4R5VIT6)
डिज़ाइन नोट्स
The 100-LQFP package uses fine-pitch leads and requires a footprint that matches the manufacturer's mechanical drawing exactly. Confirm lead pitch, body size, exposed or thermal requirements, and courtyard clearance before PCB release. Place decoupling capacitors near the appropriate power pins, keep high-current return paths compact, and use the pin-description table to verify every routed signal and alternate function.
Choose the 1.8 V, 2.5 V, or 3.3 V operating configuration only after reviewing the complete electrical limits and internal regulator arrangement. Confirm supply tolerance, sequencing, input thresholds, and the relationship between the external supply, core voltage, and peripheral rails. Use brownout-safe firmware and define a predictable reset state so partially powered conditions cannot create unsafe outputs on connected equipment.
USB OTG and DFSD are the most timing-sensitive interfaces on this device. Route USB differential pairs as a controlled impedance pair with minimal vias and continuous return-path coverage, and keep the DFSD bus topology consistent with the storage-device requirements. Check package pin assignments for alternate functions, leave programming and debug access available, and verify that clock, USB, and storage-related routes are not coupled to noisy switching nodes.
Do not treat a related STM32L4 model as a drop-in substitute solely because it uses an LQFP package. The R5, R7, and R9 memory classes differ, and alternate functions, peripheral counts, clock limits, and firmware expectations can also change. When reconsidering the MCU, compare the complete pin-description table, electrical characteristics, memory requirements, and application firmware before approving a board change.
अनुपालन जानकारी
The exact MPN is not identified as an AEC-Q100 automotive-qualified variant. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not stated in the cited product summaries.