STM32L4R7VIT6 - 120MHz Cortex-M4 MCU, 2MB Flash | STMicroelectronics
MPN: STM32L4R7VIT6 ✓ 啟用中STM32L4R7VIT6 概覽
A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces onto one package. In the product hierarchy, the STM32L4R7VIT6 is an Arm Cortex-M4 MCU within the STM32L4+ Series, combining general-purpose embedded processing with energy-conscious operation. Its 32-bit architecture makes it suitable for compact control systems that require more processing capability than an 8- or 16-bit MCU while retaining integrated flash, RAM, and peripheral resources.
The principal features of the STM32L4R7VIT6 include a 120 MHz Cortex-M4 core, 2 MB of embedded Flash, 640 KB of SRAM, and 83 GPIO. The Arm Cortex-M4 processor includes floating-point capability for control calculations, while the large SRAM supports data buffering and application state. USB OTG provides a USB interface for data exchange or device connectivity, and the DFSD peripheral supports dedicated flash-storage access.
Its operating-supply options include 1.8 V, 2.5 V, and 3.3 V rails, allowing integration with systems using common embedded voltage levels. The 100-LQFP package exposes a substantially larger pin count than small-outline packages, supporting numerous general-purpose and application-specific connections while remaining compatible with conventional leaded assembly methods. The STM32L4R7 family is positioned for connected, low-power embedded products where flash capacity, SRAM, USB, and digital I/O must coexist in one device.
Typical uses include industrial sensor controllers, portable measurement equipment, USB-connected data-acquisition units, DFSD-based data loggers, building automation endpoints, and compact control boards. The 83 available I/O can connect sensors, displays, communications transceivers, actuators, and discrete inputs without requiring a large number of external interface components.
Designers should plan the PCB around the 100-LQFP footprint, assign pins according to the manufacturer pin-description table, and preserve the required decoupling and routing geometry. The 1.8 V, 2.5 V, and 3.3 V supply options must be matched to the selected internal regulator and clock configuration. Firmware should also validate USB suspend behavior, DFSD timing, peripheral pin reassignment, and the memory map before production.
This product record combines the manufacturer's family overview with distributor technical summaries and organizes the information for engineering selection. It highlights the core, memory, package, interface, and supply information that determine whether the STM32L4R7VIT6 fits a connected embedded design.
直接替換替代品,適用於 STM32L4R7VIT6 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: STM32L4R7VIT6 (相同外形與佔位) — 差異在於 Package, Maximum Clock Frequency, Program Memory (Flash), VBAT Mode Current, RoHS Status.
STM32L4R7VIH6
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
STM32L4R9VIT6
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →STM32L4R5VIT6
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →STM32L4R5VIH6
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
STM32L4R9VIH6
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
STM32L4R7VIT6 最大額定值與電氣特性
| Product Type | 32-bit ARM Cortex-M4 microcontroller |
| Processor Core | Arm Cortex-M4, 32 bit |
| Maximum CPU Frequency | 120 MHz |
| Flash Memory | 2 MB |
| Flash Organization | 2M × 8 bit |
| SRAM | 640 KB |
| Number of I/O | 83 GPIO |
| Operating Supply Voltage Options | 1.8 V, 2.5 V, or 3.3 V |
| USB Interface | USB OTG |
| Dedicated Flash Storage Interface | DFSD |
| FPU | Arm Cortex-M4 floating-point unit |
| 封裝 | 100-LQFP |
| Package Body Size | 14 mm × 14 mm |
| 腳位數 | 100 pins |
| 安裝方式 | Tray |
| Series | STM32L4+ Series |
| RoHS 狀態 | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_qualified |
STM32L4R7VIT6 14 mm × 14 mm 腳位配置指南
STM32L4R7VIT6(14 mm × 14 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: STM32L4R7VIT6.
請參閱 資料表 以查看完整腳位配置。
典型應用
STM32L4R7VIT6 適用於 6 應用s: Industrial Sensor and Condition Monitoring, USB-Connected Measurement Equipment, DFSD Data Logging, Building Automation Endpoint, Portable Medical and Wellness Device, Compact Human-Machine Interface Controller.
Industrial Sensor and Condition Monitoring
The STM32L4R7VIT6 fits industrial monitoring controllers that must combine many sensor inputs with local processing and low-power behavior. Its 83 GPIO can connect digital sensors, alarm inputs, status indicators, and actuator outputs, while the 120 MHz Arm Cortex-M4 core supports filtering and control calculations. The 640 KB SRAM provides useful working space for sampled data and control state. Its 1.8 V, 2.5 V, or 3.3 V supply choices support multiple industrial board architectures. Design the analog front end separately, validate logic thresholds against the selected supply configuration, and use the manufacturer pin table when assigning communication and debug functions.
推薦
USB-Connected Measurement Equipment
The STM32L4R7VIT6 is suitable for USB-connected instruments that need more computation and memory than a basic microcontroller provides. USB OTG supports device communication, while the Cortex-M4 processor handles measurement control and data preparation. The 2 MB Flash can retain firmware, calibration tables, and configuration data, and 640 KB of SRAM can buffer samples before USB transfer. The 100-LQFP package also provides a broad selection of general-purpose and alternate-function pins for sensor interfaces, displays, and status controls. Firmware should implement USB enumeration, suspend and resume behavior, and a practical transfer-buffer strategy.
推薦
DFSD Data Logging
The STM32L4R7VIT6 can serve as the controller in a local data-logging product that combines continuous sampling with dedicated flash-storage access. The DFSD interface provides a dedicated path for flash-storage data movement, while the 120 MHz Cortex-M4 core performs acquisition sequencing and data preparation. Internal Flash can hold firmware and configuration, and 640 KB of SRAM can support staging buffers before writes are committed to storage. A production design should include write-protect handling, power-loss recovery, wear management, and a mechanism for validating stored records. Storage-device electrical and timing requirements should follow the manufacturer guidance.
推薦
Building Automation Endpoint
The STM32L4R7VIT6 is appropriate for building-automation endpoints that consolidate sensing, local logic, and wired or wireless communication interfaces. Its 83 GPIO can handle digital inputs, relay outputs, and bus transceivers, while 640 KB of SRAM allows protocol buffering and application state. The low-power STM32L4+ platform is useful in equipment that spends substantial time idle between control updates. Choose the 1.8 V, 2.5 V, or 3.3 V operating option to match the board power architecture, and confirm alternate-function assignments in the pin table before routing communication signals. Production firmware should also include watchdog, brownout, and communication recovery behavior.
推薦
Portable Medical and Wellness Device
The STM32L4R7VIT6 can serve as the central controller in a portable wellness or diagnostic accessory that combines sensor acquisition, local processing, and USB connectivity. The Cortex-M4 floating-point capability supports numerical workloads, while 640 KB of SRAM is useful for signal buffers and application state. The 2 MB Flash capacity can hold control firmware and configuration information. Because medical designs can involve strict safety and regulatory requirements, this general-purpose MCU should be selected only after the complete electrical, lifecycle, and validation requirements are reviewed. Firmware should include sensor-data integrity checks, safe fault states, and controlled USB reconnection.
推薦
Compact Human-Machine Interface Controller
The STM32L4R7VIT6 fits compact controllers that combine a display interface, buttons, indicators, communications, and embedded control logic. Its 83 GPIO provides substantial connectivity for display commands, encoders, touch inputs, and status LEDs, while the 120 MHz core supports responsive interface updates. The internal 2 MB Flash and 640 KB SRAM reduce reliance on external memory for typical control products. Use the manufacturer alternate-function table to allocate pins for display, communication, and debug functions, and reserve adequate routing space for the 100-LQFP footprint. The final design should verify power sequencing, signal levels, and firmware timing against the selected display and communication interfaces.
推薦
推薦產品摘要
工程參考資料,適用於 STM32L4R7VIT6 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 |
|---|---|
| Brand | STMicroelectronics |
| Package | 100-LQFP, 14 mm × 14 mm |
| Processor Core | Arm Cortex-M4, 32 bit |
| Maximum CPU Frequency | 120 MHz |
| Flash Memory | 2 MB |
| SRAM | 640 KB |
| Number of I/O | 83 GPIO |
| Operating Supply Voltage Options | 1.8 V, 2.5 V, or 3.3 V |
| USB Interface | USB OTG |
| Dedicated Flash Storage Interface | DFSD |
主要差異化特點
- Large embedded memory for a compact controller (對比STM32L4R5VIT6)
- Extensive integrated I/O (對比STM32L4R7VIT6 in a 48-pin package)
- USB and dedicated flash-storage integration (對比STM32L4R5VIT6)
設計說明
The 100-LQFP package uses fine-pitch leads and requires a footprint that matches the manufacturer's mechanical drawing exactly. Confirm lead pitch, body size, exposed or thermal requirements, and courtyard clearance before PCB release. Place decoupling capacitors near the appropriate power pins, keep high-current return paths compact, and use the pin-description table to verify every routed signal and alternate function.
Choose the 1.8 V, 2.5 V, or 3.3 V operating configuration only after reviewing the complete electrical limits and internal regulator arrangement. Confirm supply tolerance, sequencing, input thresholds, and the relationship between the external supply, core voltage, and peripheral rails. Use brownout-safe firmware and define a predictable reset state so partially powered conditions cannot create unsafe outputs on connected equipment.
USB OTG and DFSD are the most timing-sensitive interfaces on this device. Route USB differential pairs as a controlled impedance pair with minimal vias and continuous return-path coverage, and keep the DFSD bus topology consistent with the storage-device requirements. Check package pin assignments for alternate functions, leave programming and debug access available, and verify that clock, USB, and storage-related routes are not coupled to noisy switching nodes.
Do not treat a related STM32L4 model as a drop-in substitute solely because it uses an LQFP package. The R5, R7, and R9 memory classes differ, and alternate functions, peripheral counts, clock limits, and firmware expectations can also change. When reconsidering the MCU, compare the complete pin-description table, electrical characteristics, memory requirements, and application firmware before approving a board change.
合規資訊
The exact MPN is not identified as an AEC-Q100 automotive-qualified variant. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not stated in the cited product summaries.