STM32L4R7VIT6 - 120MHz Cortex-M4 MCU, 2MB Flash | STMicroelectronics
MPN: STM32L4R7VIT6 ✓ Hoạt độngSTM32L4R7VIT6 Tóm tắt
A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces onto one package. In the product hierarchy, the STM32L4R7VIT6 is an Arm Cortex-M4 MCU within the STM32L4+ Series, combining general-purpose embedded processing with energy-conscious operation. Its 32-bit architecture makes it suitable for compact control systems that require more processing capability than an 8- or 16-bit MCU while retaining integrated flash, RAM, and peripheral resources.
The principal features of the STM32L4R7VIT6 include a 120 MHz Cortex-M4 core, 2 MB of embedded Flash, 640 KB of SRAM, and 83 GPIO. The Arm Cortex-M4 processor includes floating-point capability for control calculations, while the large SRAM supports data buffering and application state. USB OTG provides a USB interface for data exchange or device connectivity, and the DFSD peripheral supports dedicated flash-storage access.
Its operating-supply options include 1.8 V, 2.5 V, and 3.3 V rails, allowing integration with systems using common embedded voltage levels. The 100-LQFP package exposes a substantially larger pin count than small-outline packages, supporting numerous general-purpose and application-specific connections while remaining compatible with conventional leaded assembly methods. The STM32L4R7 family is positioned for connected, low-power embedded products where flash capacity, SRAM, USB, and digital I/O must coexist in one device.
Typical uses include industrial sensor controllers, portable measurement equipment, USB-connected data-acquisition units, DFSD-based data loggers, building automation endpoints, and compact control boards. The 83 available I/O can connect sensors, displays, communications transceivers, actuators, and discrete inputs without requiring a large number of external interface components.
Designers should plan the PCB around the 100-LQFP footprint, assign pins according to the manufacturer pin-description table, and preserve the required decoupling and routing geometry. The 1.8 V, 2.5 V, and 3.3 V supply options must be matched to the selected internal regulator and clock configuration. Firmware should also validate USB suspend behavior, DFSD timing, peripheral pin reassignment, and the memory map before production.
This product record combines the manufacturer's family overview with distributor technical summaries and organizes the information for engineering selection. It highlights the core, memory, package, interface, and supply information that determine whether the STM32L4R7VIT6 fits a connected embedded design.
Bộ thay thế dễ dàng lắp đặt cho STM32L4R7VIT6 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với STM32L4R7VIT6 (cùng hình factor và footprint) — khác nhau ở Package, Maximum Clock Frequency, Program Memory (Flash), VBAT Mode Current, RoHS Status.
STM32L4R7VIH6
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
STM32L4R9VIT6
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →STM32L4R5VIT6
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →STM32L4R5VIH6
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
STM32L4R9VIH6
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
STM32L4R7VIT6 Tỷ lệ tối đa & tính chất điện
| Product Type | 32-bit ARM Cortex-M4 microcontroller |
| Processor Core | Arm Cortex-M4, 32 bit |
| Maximum CPU Frequency | 120 MHz |
| Flash Memory | 2 MB |
| Flash Organization | 2M × 8 bit |
| SRAM | 640 KB |
| Number of I/O | 83 GPIO |
| Operating Supply Voltage Options | 1.8 V, 2.5 V, or 3.3 V |
| USB Interface | USB OTG |
| Dedicated Flash Storage Interface | DFSD |
| FPU | Arm Cortex-M4 floating-point unit |
| Hộp | 100-LQFP |
| Package Body Size | 14 mm × 14 mm |
| Số chân | 100 pins |
| Kiểu lắp đặt | Tray |
| Series | STM32L4+ Series |
| Trạng thái RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_qualified |
Hướng dẫn cấu hình chân STM32L4R7VIT6 14 mm × 14 mm
Cấu hình chân cho STM32L4R7VIT6 (14 mm × 14 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho STM32L4R7VIT6.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
STM32L4R7VIT6 phù hợp cho 6 Áp dụngs: Industrial Sensor and Condition Monitoring, USB-Connected Measurement Equipment, DFSD Data Logging, Building Automation Endpoint, Portable Medical and Wellness Device, Compact Human-Machine Interface Controller.
Industrial Sensor and Condition Monitoring
The STM32L4R7VIT6 fits industrial monitoring controllers that must combine many sensor inputs with local processing and low-power behavior. Its 83 GPIO can connect digital sensors, alarm inputs, status indicators, and actuator outputs, while the 120 MHz Arm Cortex-M4 core supports filtering and control calculations. The 640 KB SRAM provides useful working space for sampled data and control state. Its 1.8 V, 2.5 V, or 3.3 V supply choices support multiple industrial board architectures. Design the analog front end separately, validate logic thresholds against the selected supply configuration, and use the manufacturer pin table when assigning communication and debug functions.
Được đề xuất
USB-Connected Measurement Equipment
The STM32L4R7VIT6 is suitable for USB-connected instruments that need more computation and memory than a basic microcontroller provides. USB OTG supports device communication, while the Cortex-M4 processor handles measurement control and data preparation. The 2 MB Flash can retain firmware, calibration tables, and configuration data, and 640 KB of SRAM can buffer samples before USB transfer. The 100-LQFP package also provides a broad selection of general-purpose and alternate-function pins for sensor interfaces, displays, and status controls. Firmware should implement USB enumeration, suspend and resume behavior, and a practical transfer-buffer strategy.
Được đề xuất
DFSD Data Logging
The STM32L4R7VIT6 can serve as the controller in a local data-logging product that combines continuous sampling with dedicated flash-storage access. The DFSD interface provides a dedicated path for flash-storage data movement, while the 120 MHz Cortex-M4 core performs acquisition sequencing and data preparation. Internal Flash can hold firmware and configuration, and 640 KB of SRAM can support staging buffers before writes are committed to storage. A production design should include write-protect handling, power-loss recovery, wear management, and a mechanism for validating stored records. Storage-device electrical and timing requirements should follow the manufacturer guidance.
Được đề xuất
Building Automation Endpoint
The STM32L4R7VIT6 is appropriate for building-automation endpoints that consolidate sensing, local logic, and wired or wireless communication interfaces. Its 83 GPIO can handle digital inputs, relay outputs, and bus transceivers, while 640 KB of SRAM allows protocol buffering and application state. The low-power STM32L4+ platform is useful in equipment that spends substantial time idle between control updates. Choose the 1.8 V, 2.5 V, or 3.3 V operating option to match the board power architecture, and confirm alternate-function assignments in the pin table before routing communication signals. Production firmware should also include watchdog, brownout, and communication recovery behavior.
Được đề xuất
Portable Medical and Wellness Device
The STM32L4R7VIT6 can serve as the central controller in a portable wellness or diagnostic accessory that combines sensor acquisition, local processing, and USB connectivity. The Cortex-M4 floating-point capability supports numerical workloads, while 640 KB of SRAM is useful for signal buffers and application state. The 2 MB Flash capacity can hold control firmware and configuration information. Because medical designs can involve strict safety and regulatory requirements, this general-purpose MCU should be selected only after the complete electrical, lifecycle, and validation requirements are reviewed. Firmware should include sensor-data integrity checks, safe fault states, and controlled USB reconnection.
Được đề xuất
Compact Human-Machine Interface Controller
The STM32L4R7VIT6 fits compact controllers that combine a display interface, buttons, indicators, communications, and embedded control logic. Its 83 GPIO provides substantial connectivity for display commands, encoders, touch inputs, and status LEDs, while the 120 MHz core supports responsive interface updates. The internal 2 MB Flash and 640 KB SRAM reduce reliance on external memory for typical control products. Use the manufacturer alternate-function table to allocate pins for display, communication, and debug functions, and reserve adequate routing space for the 100-LQFP footprint. The final design should verify power sequencing, signal levels, and firmware timing against the selected display and communication interfaces.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho STM32L4R7VIT6 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này |
|---|---|
| Brand | STMicroelectronics |
| Package | 100-LQFP, 14 mm × 14 mm |
| Processor Core | Arm Cortex-M4, 32 bit |
| Maximum CPU Frequency | 120 MHz |
| Flash Memory | 2 MB |
| SRAM | 640 KB |
| Number of I/O | 83 GPIO |
| Operating Supply Voltage Options | 1.8 V, 2.5 V, or 3.3 V |
| USB Interface | USB OTG |
| Dedicated Flash Storage Interface | DFSD |
Bảo phân biệt quan trọng
- Large embedded memory for a compact controller (vsSTM32L4R5VIT6)
- Extensive integrated I/O (vsSTM32L4R7VIT6 in a 48-pin package)
- USB and dedicated flash-storage integration (vsSTM32L4R5VIT6)
Ghi chú thiết kế
The 100-LQFP package uses fine-pitch leads and requires a footprint that matches the manufacturer's mechanical drawing exactly. Confirm lead pitch, body size, exposed or thermal requirements, and courtyard clearance before PCB release. Place decoupling capacitors near the appropriate power pins, keep high-current return paths compact, and use the pin-description table to verify every routed signal and alternate function.
Choose the 1.8 V, 2.5 V, or 3.3 V operating configuration only after reviewing the complete electrical limits and internal regulator arrangement. Confirm supply tolerance, sequencing, input thresholds, and the relationship between the external supply, core voltage, and peripheral rails. Use brownout-safe firmware and define a predictable reset state so partially powered conditions cannot create unsafe outputs on connected equipment.
USB OTG and DFSD are the most timing-sensitive interfaces on this device. Route USB differential pairs as a controlled impedance pair with minimal vias and continuous return-path coverage, and keep the DFSD bus topology consistent with the storage-device requirements. Check package pin assignments for alternate functions, leave programming and debug access available, and verify that clock, USB, and storage-related routes are not coupled to noisy switching nodes.
Do not treat a related STM32L4 model as a drop-in substitute solely because it uses an LQFP package. The R5, R7, and R9 memory classes differ, and alternate functions, peripheral counts, clock limits, and firmware expectations can also change. When reconsidering the MCU, compare the complete pin-description table, electrical characteristics, memory requirements, and application firmware before approving a board change.
Thông tin tuân thủ
The exact MPN is not identified as an AEC-Q100 automotive-qualified variant. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not stated in the cited product summaries.