STMicroelectronics

STM8L101F2U6TR - 16MHz 4KB Flash Ultra-Low-Power MCU | STMicroelectronics

MPN: STM8L101F2U6TR ✓ सक्रिय
1.65 V to 3.6 V Vdss 0.3 µA Id 20-pin UFQFPN, 3 mm x 3 mm, 0.60 mm height Package 16 MHz Speed 4 KB (4K x 8) Memory
न्यूनतम ऑर्डर मात्रा: 1 |

STM8L101F2U6TR अवलोकन

The STMicroelectronics STM8L101F2U6TR is an 8-bit ultra-low-power microcontroller with a 16 MHz enhanced STM8 CPU core, 4 KB of Flash memory, and a 20-pin UFQFPN package measuring 3 mm by 3 mm. It is designed for compact, battery-operated products that need low standby current and a broad set of communication peripherals. The device includes 18 I/O ports and supports multifunction timers, comparators, USART, SPI, and I2C interfaces. According to the STM8L101x1 STM8L101x2 STM8L101x3 family description, the enhanced STM8 core delivers processing performance of up to 16 MIPS at 16 MHz while keeping the power requirements suitable for energy-limited embedded systems.

An ultra-low-power microcontroller is a type of embedded controller that minimizes energy use during idle, wait, and active-halt operating modes. The STM8L101 family belongs to the STM8L EnergyLite line of 8-bit microcontrollers, combining a compact architecture with low-power modes for applications such as wireless controls, sensor nodes, compact consumer equipment, and battery-powered accessories. The STM8L101F2U6TR operating voltage range is 1.65 V to 3.6 V, allowing operation from low-voltage energy-harvesting or single-cell-derived power rails when the rail regulation characteristics are suitable.

The STM8L101F2U6TR provides 4 KB of Flash program memory, an 8-bit instruction set, and a maximum clock speed of 16 MHz. The family also provides low-power operating characteristics, including Halt current of 0.3 µA and Active-halt current listed from 0.8 µA in the STM8L101x2 family documentation. Its communication resources include USART, SPI, and I2C, while multifunction timers and comparators support sensing, motor-control, and timing tasks without requiring additional discrete components.

The 20-pin UFQFPN package is only 3 mm by 3 mm with a stated height of 0.60 mm. This small footprint supports space-constrained designs, but exposed-pad thermal management and assembly process controls require attention. The 18 available I/O ports give designers access to digital interfaces, timers, serial functions, and analog comparator features in a modest pin count. The manufacturer family page identifies the STM8L101x2 as an active low-power MCU family with performance up to 16 MIPS at 16 MHz.

Typical uses for this part include low-power sensor interfaces, remote controls, battery-powered monitors, small serial-connected accessories, and embedded control blocks in compact consumer products. Its I2C and SPI interfaces allow connection to sensors and external transceivers, while USART provides a simple path to host controllers or service interfaces. The comparators and timers are useful for threshold detection, wake-up logic, and low-power event sequencing.

When laying out this device, place decoupling capacitors close to the supply and ground pins, route sensitive analog inputs away from switching nodes, and consult the pin-description and package-land-pattern sections of the manufacturer datasheet before assigning PCB tracks. This page combines the manufacturer family specifications with practical application guidance, alternative-selection notes, and interface-oriented design considerations for engineers evaluating the STM8L101F2U6TR.

के लिए ड्रॉप-इन विकल्प STM8L101F2U6TR — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

STM8L101F2U6ATR

✅ ड्रॉप-इन
📦 20-pin UFQFPN (3 mm x 3 mm)
Same STM8L101F2U6 device family and 4 KB Flash/16 MHz configuration; ordering suffix differs, which may change packing or qualification details

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

STM8L101F2U6A

✅ ड्रॉप-इन
📦 20-pin UFQFPN (3 mm x 3 mm)
Same STM8L101F2U6 family and 4 KB Flash/16 MHz configuration; ordering-code qualification must be confirmed against the manufacturer datasheet

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

STM8L101F2U6

✅ ड्रॉप-इन
📦 20-pin UFQFPN (3 mm x 3 mm)
Base ordering code of the same 4 KB Flash, 16 MHz STM8L101F2U6 device; packing and temperature details require confirmation

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

STM8L101F2U6TR Maximum Ratings और Electrical Characteristics

Product Type 8-bit ultra-low-power microcontroller
Series STM8L EnergyLite
अधिकतम क्लॉक फ़्रीक्वेंसी 16 MHz
Maximum Processing Performance 16 MIPS at 16 MHz
Flash Memory 4 KB (4K x 8)
Supply Voltage Range 1.65 V to 3.6 V
I/O Ports 18
पैकेज 20-pin UFQFPN, 3 mm x 3 mm, 0.60 mm height
माउंटिंग प्रकार Surface Mount
Halt Current 0.3 µA
Active-Halt Current 0.8 µA or higher, depending on operating condition
Serial Interfaces USART, SPI, I2C
Peripheral Support Multifunction timers and comparators
ऑपरेटिंग तापमान रेंज -40 °C to +85 °C
Architecture Enhanced STM8 8-bit CPU core
RoHS Compliance Compliant
लाइफसाइकिल स्थिति Active

STM8L101F2U6TR 20-pin ufqfpn, 3 mm x 3 mm, 0.60 mm height पिन कॉन्फ़िगरेशन गाइड

STM8L101F2U6TR (20-pin ufqfpn, 3 mm x 3 mm, 0.60 mm height पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।

STM8L101F2U6TR के लिए 20-pin ufqfpn, 3 mm x 3 mm, 0.60 mm height पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: STM8L101F2U6TR.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

STM8L101F2U6TR के लिए उपयुक्त है 6 अनुप्रयोगs: Battery-Powered Sensor Node, Wireless Remote Control, Compact Serial Monitoring Device, Battery-Powered Accessory Controller, Low-Power Threshold Detection, Small Industrial Control Module.

🧩

Battery-Powered Sensor Node

The STM8L101F2U6TR fits a compact sensor node that periodically wakes, measures a condition, and returns to a low-power state. Its 1.65 V to 3.6 V operating range supports low-voltage rails, while the 0.3 µA Halt current provides a useful starting point for battery-life calculations. I2C or SPI can connect digital sensors, and the comparators can perform threshold detection without waking the main processing path. Firmware should disable unused peripherals, select the lowest acceptable clock setting, and configure wake-up sources to achieve the intended duty cycle.

📱

Wireless Remote Control

In a compact wireless remote, the STM8L101F2U6TR can scan buttons, drive indicator LEDs, and manage a serial radio connection without requiring a larger controller. Its 18 I/O ports provide ample capacity for switches and status signals within a 3 mm by 3 mm package. USART offers a straightforward link to many radio transceivers, while SPI or I2C can serve higher-throughput or bus-oriented accessories. Low-power operation and wake-up interrupt handling are especially important because the device spends most of its life waiting for user input.

🏭

Compact Serial Monitoring Device

The STM8L101F2U6TR is suitable for a small monitoring module that gathers local sensor information and forwards status over a serial link. The USART provides a simple host or service interface, while I2C and SPI expand the available device connections. Its 16 MHz enhanced STM8 core provides up to 16 MIPS for protocol handling, and the low-power modes support installations where continuous full-rate processing is unnecessary. Designers should define buffering and timeout behavior so communication activity does not prevent the controller from reaching its intended low-power state.

📱

Battery-Powered Accessory Controller

For a wearable or compact consumer accessory, the STM8L101F2U6TR can manage buttons, status LEDs, charging-related control signals, and a short-range communications link. Its 3 mm by 3 mm UFQFPN package preserves board area in space-constrained products, and 18 I/O ports support both control and peripheral multiplexing. The 1.65 V minimum supply voltage is useful for compact power systems, although the complete battery, regulator, and load-switch arrangement must remain within the manufacturer electrical limits.

⚡

Low-Power Threshold Detection

The STM8L101F2U6TR can implement an always-available threshold-detection function using its integrated comparators and multifunction timers. A comparator can monitor a battery, sensor output, or control signal while the CPU remains in a low-power mode, reducing processing load and improving response time. The exact comparator and timer channels must be assigned from the manufacturer pin and peripheral tables. Firmware should configure the interrupt or wake-up path carefully to avoid nuisance wake-ups and unnecessary energy consumption.

🏭

Small Industrial Control Module

The STM8L101F2U6TR can serve as the local controller in a small industrial sensing module that interfaces to a parent system through USART. Its multifunction timers handle periodic sampling and output timing, while I2C or SPI connects to sensors, memory, or transceiver hardware. The -40 °C to +85 °C temperature range supports industrial environments when the board, power supply, and external components are appropriately rated. Use isolation, surge protection, and grounding practices at any interface that leaves the controlled enclosure.

What is the STM8L101F2U6TR?
The STM8L101F2U6TR is an 8-bit ultra-low-power microcontroller from STMicroelectronics with a 16 MHz maximum clock, 4 KB of Flash memory, and a 20-pin UFQFPN package. It provides USART, SPI, I2C, multifunction timers, comparators, and 18 I/O ports. According to the STM8L101x2 manufacturer family page, the enhanced STM8 core reaches up to 16 MIPS at 16 MHz, making the device suitable for compact, low-power embedded controls.
What is the operating voltage of the STM8L101F2U6TR?
The STM8L101F2U6TR operates from 1.65 V to 3.6 V. This low operating range supports energy-conscious designs using low-voltage supply rails, subject to the timing, flash-programming, and peripheral requirements described in the manufacturer datasheet. The Mouser product listing also identifies the device as an 8-bit low-power MCU rated for -40 °C to +85 °C operation.
How much Flash memory does the STM8L101F2U6TR have?
The STM8L101F2U6TR contains 4 KB of Flash memory organized as 4K x 8. The STM8L101x2 family supports multifunction timers, comparators, USART, SPI, and I2C alongside this program memory. Firmware capacity should be checked against the final application, bootloader requirements, and any application-specific data storage requirements before the device is selected for production.
What package does the STM8L101F2U6TR use?
The STM8L101F2U6TR is supplied in a 20-pin UFQFPN package measuring 3 mm by 3 mm with a stated height of 0.60 mm. The small land pattern is suitable for space-constrained products, but exposed-pad connection, paste stencil design, reflow profile, and assembly cleanliness should follow the manufacturer package recommendations. Use the package drawing and recommended footprint in the manufacturer datasheet for layout work.
Where can I download the STM8L101F2U6TR datasheet?
The official STM8L101F2 family page is the preferred starting point for the manufacturer datasheet and product resources. It identifies the STM8L101x1, STM8L101x2, and STM8L101x3 low-power family and its enhanced STM8 CPU core. The STM8L101F2U6TR-specific PDF is also indexed through the listed datasheet repositories. Use the pin table and electrical characteristics in the manufacturer document for final design sign-off.
Where is the pinout for the STM8L101F2U6TR?
The pin assignment is published in the pin-description table and package drawing of the STM8L101x2 family datasheet. The device uses a 20-pin UFQFPN package with 18 I/O ports, and several pins can serve multiple peripheral functions. Assign the physical PCB tracks from the manufacturer pin table rather than from a generic UFQFPN outline, because alternate functions and exposed-pad treatment determine the usable signal map.
What is the best drop-in replacement for the STM8L101F2U6TR?
The closest documented same-family replacement candidates are STM8L101F2U6ATR, STM8L101F2U6A, and STM8L101F2U6, but the published cross-reference information does not establish that every ordering code is a pin-to-pin drop-in replacement. Confirm the exact package, pin mapping, memory configuration, temperature grade, and tape-and-reel ordering requirements against the manufacturer datasheet before approving any substitution. The Request a Quote form on this page can help identify sourcing for these variants.
Can STM8L101F2U6ATR replace STM8L101F2U6TR?
STM8L101F2U6ATR is a closely related STM8L101F2U6 orderable variant, but the available listing does not explicitly state that it is a pin-to-pin drop-in replacement. Verify the package dimensions, exposed-pad layout, pin multiplexing, flash configuration, and temperature rating in the manufacturer documentation. If the electrical pin map matches, the change can often be handled as an ordering-code or packing-code review rather than a full PCB redesign.
What is the difference between STM8L101F2U6TR and STM8L101F2U6?
STM8L101F2U6TR and STM8L101F2U6 belong to the same STM8L101F2 family and are associated with the same 4 KB Flash, 16 MHz, low-voltage MCU configuration. The visible distinction is the ordering suffix, which can encode delivery or packing information. Before treating the base part as a drop-in option, confirm the package form, temperature grade, and packing method because those details affect PCB assembly and ordering.
When should I choose the STM8L101F2U6TR over another low-power MCU?
Choose the STM8L101F2U6TR when a design needs a very small 3 mm by 3 mm footprint, 16 MHz 8-bit processing, 4 KB of Flash, and the established STM8L101F2 peripheral set. Its 1.65 V to 3.6 V supply range and low Halt current are useful for battery-operated products. Select another controller when the application requires more memory, wider peripherals, higher performance, or a software ecosystem that is not based on STM8.
Is the STM8L101F2U6TR suitable for battery-powered sensor nodes?
The STM8L101F2U6TR is suitable for many battery-powered sensor-node designs because it combines a 1.65 V minimum operating voltage with low-power modes and a Halt current of 0.3 µA. Its I2C and SPI interfaces can connect to sensors, while comparators and timers can support threshold and wake-up functions. Actual battery life depends on the complete duty cycle, peripheral use, regulator losses, and sleep-mode configuration.
Is the STM8L101F2U6TR suitable for a remote control?
The STM8L101F2U6TR works well for a compact remote control requiring low standby consumption, several digital inputs, and serial communication. Its 18 I/O ports support buttons, indicator control, and interface signals, while USART, SPI, and I2C provide options for connecting a radio or external peripheral. The 3 mm by 3 mm package also helps meet the space constraints common in handheld accessories.
What are the key specifications engineers should know about the STM8L101F2U6TR?
The STM8L101F2U6TR combines a 16 MHz enhanced STM8 core, up to 16 MIPS performance, 4 KB of Flash, 18 I/O ports, and a 1.65 V to 3.6 V operating range. It also provides USART, SPI, I2C, multifunction timers, and comparators in a 20-pin, 3 mm by 3 mm UFQFPN package. The STMicroelectronics family page identifies the STM8L101x2 as a low-power family optimized for compact embedded designs.
What can replace the STM8L101F2U6TR in a design?
Replacement begins with STM8L101F2U6ATR, STM8L101F2U6A, or STM8L101F2U6 because these are the closest related ordering variants named in cross-reference listings. A genuine drop-in decision requires identical package geometry, pin multiplexing, memory size, peripheral behavior, voltage range, and temperature rating. Cross-brand MCUs should be treated as redesign candidates unless their documentation explicitly establishes pin-for-pin and software compatibility.
Where can I buy the STM8L101F2U6TR and check its current price and lead time?
Use the Request a Quote form on this page to request the current unit pricing, stock status, minimum order quantity, and lead time for the STM8L101F2U6TR. The manufacturer product page and the direct ST online-store listing are the appropriate references for orderable configuration and supply-chain information. Quote details can change with volume and availability, so request the current commercial terms for the exact ordering code.

के लिए इंजीनियरिंग संदर्भ डेटा STM8L101F2U6TR — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the STM8L101F2U6TR for a compact, low-voltage 8-bit design that needs 4 KB of Flash, 18 I/O ports, and a combination of USART, SPI, and I2C. Its 16 MHz core and low-power modes are appropriate for sensor nodes, remote controls, monitoring modules, and battery-operated accessories. Select STM8L101F2U6ATR when that ordering code matches the required qualification and packing configuration. Consider STM8L101F2U6A or STM8L101F2U6 for the base-family configuration after confirming temperature grade and delivery format. A different MCU family should be chosen when firmware needs more Flash, higher performance, or a different peripheral set; cross-brand parts are not automatically drop-in because register maps, interrupt behavior, and peripheral pin multiplexing can differ even when the package dimensions match.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद STM8L101F2U6ATR STM8L101F2U6A STM8L101F2U6
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Package 20-pin UFQFPN (3 mm x 3 mm) 20-pin UFQFPN (3 mm x 3 mm) 20-pin UFQFPN (3 mm x 3 mm) 20-pin UFQFPN (3 mm x 3 mm)
Maximum Clock Frequency 16 MHz 16 MHz 16 MHz 16 MHz
Flash Memory 4 KB 4 KB 4 KB 4 KB
Supply Voltage Range 1.65 V to 3.6 V 1.65 V to 3.6 V 1.65 V to 3.6 V 1.65 V to 3.6 V
I/O Ports 18 18 18 18
Serial Interfaces USART, SPI, I2C USART, SPI, I2C USART, SPI, I2C USART, SPI, I2C
Halt Current 0.3 µA 0.3 µA 0.3 µA 0.3 µA

मुख्य विशेषताएँ

  • Very compact 3 mm by 3 mm package with 18 I/O ports (बनामSTM8L101F2U6)
  • Low-voltage operation with multiple low-power modes (बनामSTM8L101F2U6A)
  • Complete connectivity for compact embedded products (बनामSTM8L101F2U6ATR)

डिज़ाइन नोट्स

Budget the complete sleep-mode current rather than the 0.3 µA Halt figure alone. Estimated: supply leakage, pull-up resistors, peripheral state, regulator quiescent current, and periodic wake-ups are added to the MCU contribution. Use the device's low-power modes as intended and remove external pull networks where they prevent the required operating state. Confirm the final battery-life calculation with measured current on the assembled product.

Place the supply bypass capacitor as close as practical to the device's power and ground connections, and follow the manufacturer decoupling recommendations in the application information. The 3 mm by 3 mm UFQFPN footprint is small, so component placement and the exposed-pad connection must be planned together. Validate the land pattern, paste volume, and reflow profile before releasing the PCB assembly drawings.

Assign pins from the manufacturer pin-description table because the 18 I/O ports provide alternate functions that can limit simultaneous peripheral use. Keep I2C and SPI routing short, provide a continuous ground reference, and position pull-up or termination networks near the relevant driver or receiver. Route exposed-pad thermal current into a low-impedance copper plane to avoid a local temperature rise during brief active processing.

अनुपालन जानकारी

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The STM8L101F2U6TR listing identifies RoHS-compliant construction and an active lifecycle status. AEC-Q100 qualification, REACH status, lead-free construction, halogen-free construction, and conflict-minerals reporting were not confirmed.

डेटा सत्यापन तिथि: 2026-11-15 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

STM8L101F2U6TR STM8L101F2U6TR datasheet STM8L101F2U6TR datasheet pdf STM8L101F2U6TR pinout STM8L101F2U6TR specifications STM8L101F2U6TR equivalent STM8L101F2U6TR replacement STM8L101F2U6TR footprint STM8L101F2U6TR price STMicroelectronics STM8L101F2U6TR STM8L101F2U6TR 16MHz 4KB Flash STM8L101F2U6TR battery powered

संबंधित कंपोनेंट्स और शब्द

STMicroelectronics STM8L101F2U6TR STM8L101F2U6ATR STM8L101F2U6A STM8L101F2U6 STM8L101x2 STM8L EnergyLite 8-bit microcontroller embedded microcontroller ultra-low-power MCU enhanced STM8 CPU core 16 MIPS 16 MHz 4 KB Flash UFQFPN-20 QFN package family surface-mount package 3 mm x 3 mm footprint USART SPI I2C multifunction timer comparator Halt mode Active-halt mode battery-powered sensor node RoHS
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें