TLV2451ID - 6V 220kHz Low-Power RRIO Op Amp | Texas Instruments
MPN: TLV2451ID ✓ सक्रियTLV2451ID अवलोकन
An operational amplifier is a voltage-controlled differential amplifier used to amplify, buffer, filter, or compare analog signals. The TLV2451 belongs to the rail-to-rail input/output operational-amplifier family and sits within the broader hierarchy of linear amplifiers, analog amplifiers, and semiconductor signal-conditioning devices. Rail-to-rail input capability supports signal operation near the supply rails, while rail-to-rail output capability helps preserve output swing in low-voltage systems.
The principal features of the TLV2451 are its 6 V supply rating, 23 µA quiescent current, and 220 kHz gain-bandwidth product. The low quiescent current makes the amplifier suitable for systems where supply efficiency and standby consumption are important. Its 220 kHz gain-bandwidth product provides useful bandwidth for low-frequency signal conditioning, instrumentation, filtering, and general analog control tasks. The low-power operating characteristics make the device particularly relevant to portable and energy-conscious designs.
The TLV2451ID combines low supply current with rail-to-rail input and output behavior in one amplifier channel. This combination allows a circuit to handle signals close to the available supply-voltage range without adding a second amplifier for buffering. Because the device is packaged in an 8-pin SOIC, it supports conventional surface-mount assembly and PCB routing at a higher pin count than the smaller SOT-23 and MSOP package options associated with other members of the TLV245x family.
Typical applications include low-power sensor conditioning, portable measurement systems, analog filtering, voltage buffering, threshold comparison, and low-energy industrial or embedded interfaces. In a sensor front end, the amplifier can provide gain while operating at low quiescent current. In a filter or buffer, its 220 kHz gain-bandwidth product is useful for signals that do not require high-speed operation.
Designers should evaluate the complete operating point, including supply voltage, output swing, load, noise, stability, and the desired closed-loop gain. Decoupling capacitors should be placed close to the supply pins, and unused inputs must be connected to a defined potential. Because rail-to-rail operation and output swing are distinct concerns, confirm the datasheet limits for the selected supply and load conditions.
This page organizes the key TLV2451ID characteristics, sourcing guidance, package information, and design considerations into a practical engineering reference. It also identifies confirmed related family members while clearly separating direct drop-in options from variants that do not provide enough evidence for unrestricted replacement.
के लिए ड्रॉप-इन विकल्प TLV2451ID — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं TLV2451ID (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Amplifier Type, Input Common-Mode Range, Output Swing.
TLV2451CDR
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
TLV2451ID Maximum Ratings और Electrical Characteristics
| Amplifier Type | Single operational amplifier |
| सप्लाई वोल्टेज | 6 V |
| Gain-Bandwidth Product | 220 kHz |
| क्वाइसेंट करंट | 23 µA per channel |
| Input Common-Mode Range | Rail-to-rail |
| Output Swing | Rail-to-rail |
| पैकेज | 8-pin SOIC |
| माउंटिंग प्रकार | Surface mount |
| Number of Amplifiers | 1 |
| Product Category | General-purpose operational amplifier |
| Shutdown Capability | Available in the TLV245x family; TLV2451-specific status requires datasheet confirmation |
TLV2451ID 8-pin soic पिन कॉन्फ़िगरेशन गाइड
TLV2451ID (8-pin soic पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: TLV2451ID.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
TLV2451ID के लिए उपयुक्त है 6 अनुप्रयोगs: Low-Power Sensor Signal Conditioning, Portable Analog Buffering, Low-Frequency Active Filtering, Industrial Threshold Detection, Battery-Powered Data Acquisition, Audio and Control-Signal Amplification.
Low-Power Sensor Signal Conditioning
The TLV2451ID fits sensor interfaces that need gain or buffering without imposing a high standing-current demand. Its 23 µA quiescent current is valuable in battery-powered measurement systems, while rail-to-rail input operation allows signals near the supply rails to be handled more effectively than with a fixed common-mode input amplifier. The 220 kHz gain-bandwidth product is suitable for common temperature, pressure, and slow-motion sensing signals. In implementation, connect the sensor output to the appropriate amplifier input, establish the required gain with feedback components, and verify the sensor output range against the amplifier's common-mode limits.
अनुशंसित
Portable Analog Buffering
TLV2451ID is suitable for buffering sensor, divider, or reference outputs in portable equipment where amplifier current contributes directly to battery life. Rail-to-rail input and output behavior preserves useful signal range in compact, low-voltage systems, and the 220 kHz gain-bandwidth product is more than adequate for many slow analog measurements. Its 23 µA quiescent current helps limit idle consumption. Place the amplifier in a voltage-follower configuration when source and sink capability rather than voltage gain is required, and confirm the output-current and capacitive-load limits for the intended source impedance.
अनुशंसित
Low-Frequency Active Filtering
The TLV2451ID can implement first-order and moderate-frequency active filters where the design does not require the bandwidth of a high-speed amplifier. Its 220 kHz gain-bandwidth product provides closed-loop bandwidth headroom for filtering tasks involving slow sensor signals, audio-band control loops, or low-frequency communications paths. The 23 µA quiescent current also benefits multi-stage filter designs by limiting the power penalty of each amplifier stage. Choose resistor and capacitor values around the desired cutoff, then check loop gain, phase margin, output swing, and capacitive-load stability using the manufacturer's test guidance.
अनुशंसित
Industrial Threshold Detection
TLV2451ID is appropriate for comparing a scaled sensor or control signal with a reference when low standby consumption and rail-to-rail input range are important. The 6 V device can operate within compact industrial-control signal chains, while the single-amplifier 8-SOIC package keeps the footprint practical for moderate-density boards. The 220 kHz gain-bandwidth product supports threshold signals that change slowly relative to the amplifier's bandwidth. In a comparator-like circuit, include hysteresis or filtering to prevent repeated switching, and verify output-level compatibility with the logic or relay circuit driven by the output.
अनुशंसित
Battery-Powered Data Acquisition
The TLV2451ID supports low-power data-acquisition front ends that measure analog quantities slowly enough for a 220 kHz gain-bandwidth product. Its 23 µA quiescent current reduces the amplifier's contribution to standby demand, and rail-to-rail input operation can make better use of the available sensor signal range in compact systems. Use the amplifier to condition outputs from resistive sensors, dividers, or transducers before conversion by an ADC. Select feedback resistors to manage bias-current error and output loading, and place local supply decoupling close to the amplifier to reduce supply noise and improve transient response.
अनुशंसित
Audio and Control-Signal Amplification
TLV2451ID can amplify low-level audio or control signals in compact, power-conscious circuits. Its rail-to-rail input and output operation is useful when signal levels approach the available supply range, and the 220 kHz gain-bandwidth product covers many audio and low-frequency control applications. The 23 µA quiescent current limits standing consumption in always-on equipment. Design the feedback network for the intended gain and bandwidth, maintain headroom for the required output peak level, and confirm that the selected operating point remains stable with the source impedance, load, and bypass capacitance used in the final layout.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा TLV2451ID — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | TLV2451CDR |
|---|---|---|
| Package | 8-SOIC | 8-SOIC |
| Brand | Texas Instruments | Texas Instruments |
| Amplifier Type | Single operational amplifier | Single operational amplifier |
| Supply Voltage | 6 V | 6 V |
| Gain-Bandwidth Product | 220 kHz | 220 kHz |
| Quiescent Current | 23 µA per channel | 23 µA per channel |
| Input Common-Mode Range | Rail-to-rail | Rail-to-rail |
| Output Swing | Rail-to-rail | Rail-to-rail |
| Shipping Suffix | ID | CDR |
मुख्य विशेषताएँ
- Low quiescent current with useful gain-bandwidth performance (बनामTLV2451CDR)
- Rail-to-rail input and output operation (बनामTLV2451CDR)
- Compact single-amplifier implementation (बनामTLV2451CDR)
डिज़ाइन नोट्स
Place the supply-bypass capacitor as close as practical to the TLV2451ID power and ground pins, and route the return path without sharing long current paths with sensitive inputs. For an 8-SOIC layout, confirm the physical pin numbering and exposed functional differences from the manufacturer pin-description table before assigning signals. Keep feedback resistors close to the amplifier where practical to reduce parasitic pickup and sensitivity to board contamination.
The TLV2451ID's 23 µA quiescent current makes supply planning straightforward for low-power systems, but total current also includes output-current demand and input-bias effects. Do not treat the quiescent-current figure as maximum supply consumption. Check the datasheet output-current capability against the load and ensure the 6 V device is operated within its absolute maximum and common-mode limits.
Do not assume that rail-to-rail input operation permits every input voltage under every output condition; common-mode range, output swing, and gain are interdependent. Likewise, a 220 kHz gain-bandwidth product does not guarantee stable operation at every closed-loop gain or capacitive load. Use the manufacturer's recommended stability test conditions and verify the final design with the intended source impedance, load, bypass capacitor, and PCB layout.
Unused inputs must be connected to a defined potential rather than left floating. For low-level sensor interfaces, check input-bias-current effects and choose feedback resistors that balance bias-current cancellation against thermal noise and sensitivity to board leakage. Short signal traces, a quiet ground reference, and physical separation from switching nodes can prevent the low-power rail-to-rail stage from amplifying unwanted interference.
अनुपालन जानकारी
No explicit compliance declarations were identified for the exact TLV2451ID ordering code. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals status with the manufacturer before final regulatory qualification.