TLV2451ID - 6V 220kHz Low-Power RRIO Op Amp | Texas Instruments
MPN: TLV2451ID ✓ 啟用中TLV2451ID 概覽
An operational amplifier is a voltage-controlled differential amplifier used to amplify, buffer, filter, or compare analog signals. The TLV2451 belongs to the rail-to-rail input/output operational-amplifier family and sits within the broader hierarchy of linear amplifiers, analog amplifiers, and semiconductor signal-conditioning devices. Rail-to-rail input capability supports signal operation near the supply rails, while rail-to-rail output capability helps preserve output swing in low-voltage systems.
The principal features of the TLV2451 are its 6 V supply rating, 23 µA quiescent current, and 220 kHz gain-bandwidth product. The low quiescent current makes the amplifier suitable for systems where supply efficiency and standby consumption are important. Its 220 kHz gain-bandwidth product provides useful bandwidth for low-frequency signal conditioning, instrumentation, filtering, and general analog control tasks. The low-power operating characteristics make the device particularly relevant to portable and energy-conscious designs.
The TLV2451ID combines low supply current with rail-to-rail input and output behavior in one amplifier channel. This combination allows a circuit to handle signals close to the available supply-voltage range without adding a second amplifier for buffering. Because the device is packaged in an 8-pin SOIC, it supports conventional surface-mount assembly and PCB routing at a higher pin count than the smaller SOT-23 and MSOP package options associated with other members of the TLV245x family.
Typical applications include low-power sensor conditioning, portable measurement systems, analog filtering, voltage buffering, threshold comparison, and low-energy industrial or embedded interfaces. In a sensor front end, the amplifier can provide gain while operating at low quiescent current. In a filter or buffer, its 220 kHz gain-bandwidth product is useful for signals that do not require high-speed operation.
Designers should evaluate the complete operating point, including supply voltage, output swing, load, noise, stability, and the desired closed-loop gain. Decoupling capacitors should be placed close to the supply pins, and unused inputs must be connected to a defined potential. Because rail-to-rail operation and output swing are distinct concerns, confirm the datasheet limits for the selected supply and load conditions.
This page organizes the key TLV2451ID characteristics, sourcing guidance, package information, and design considerations into a practical engineering reference. It also identifies confirmed related family members while clearly separating direct drop-in options from variants that do not provide enough evidence for unrestricted replacement.
直接替換替代品,適用於 TLV2451ID — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: TLV2451ID (相同外形與佔位) — 差異在於 Amplifier Type, Input Common-Mode Range, Output Swing.
TLV2451CDR
✅ 直接替換📋 參考替代品(不在目錄中)
TLV2451ID 最大額定值與電氣特性
| Amplifier Type | Single operational amplifier |
| 供應電壓 | 6 V |
| Gain-Bandwidth Product | 220 kHz |
| 靜態電流 | 23 µA per channel |
| Input Common-Mode Range | Rail-to-rail |
| Output Swing | Rail-to-rail |
| 封裝 | 8-pin SOIC |
| 安裝類型 | Surface mount |
| Number of Amplifiers | 1 |
| Product Category | General-purpose operational amplifier |
| Shutdown Capability | Available in the TLV245x family; TLV2451-specific status requires datasheet confirmation |
TLV2451ID 8-pin soic 腳位配置指南
TLV2451ID(8-pin soic 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: TLV2451ID.
請參閱 資料表 以查看完整腳位配置。
典型應用
TLV2451ID 適用於 6 應用s: Low-Power Sensor Signal Conditioning, Portable Analog Buffering, Low-Frequency Active Filtering, Industrial Threshold Detection, Battery-Powered Data Acquisition, Audio and Control-Signal Amplification.
Low-Power Sensor Signal Conditioning
The TLV2451ID fits sensor interfaces that need gain or buffering without imposing a high standing-current demand. Its 23 µA quiescent current is valuable in battery-powered measurement systems, while rail-to-rail input operation allows signals near the supply rails to be handled more effectively than with a fixed common-mode input amplifier. The 220 kHz gain-bandwidth product is suitable for common temperature, pressure, and slow-motion sensing signals. In implementation, connect the sensor output to the appropriate amplifier input, establish the required gain with feedback components, and verify the sensor output range against the amplifier's common-mode limits.
推薦
Portable Analog Buffering
TLV2451ID is suitable for buffering sensor, divider, or reference outputs in portable equipment where amplifier current contributes directly to battery life. Rail-to-rail input and output behavior preserves useful signal range in compact, low-voltage systems, and the 220 kHz gain-bandwidth product is more than adequate for many slow analog measurements. Its 23 µA quiescent current helps limit idle consumption. Place the amplifier in a voltage-follower configuration when source and sink capability rather than voltage gain is required, and confirm the output-current and capacitive-load limits for the intended source impedance.
推薦
Low-Frequency Active Filtering
The TLV2451ID can implement first-order and moderate-frequency active filters where the design does not require the bandwidth of a high-speed amplifier. Its 220 kHz gain-bandwidth product provides closed-loop bandwidth headroom for filtering tasks involving slow sensor signals, audio-band control loops, or low-frequency communications paths. The 23 µA quiescent current also benefits multi-stage filter designs by limiting the power penalty of each amplifier stage. Choose resistor and capacitor values around the desired cutoff, then check loop gain, phase margin, output swing, and capacitive-load stability using the manufacturer's test guidance.
推薦
Industrial Threshold Detection
TLV2451ID is appropriate for comparing a scaled sensor or control signal with a reference when low standby consumption and rail-to-rail input range are important. The 6 V device can operate within compact industrial-control signal chains, while the single-amplifier 8-SOIC package keeps the footprint practical for moderate-density boards. The 220 kHz gain-bandwidth product supports threshold signals that change slowly relative to the amplifier's bandwidth. In a comparator-like circuit, include hysteresis or filtering to prevent repeated switching, and verify output-level compatibility with the logic or relay circuit driven by the output.
推薦
Battery-Powered Data Acquisition
The TLV2451ID supports low-power data-acquisition front ends that measure analog quantities slowly enough for a 220 kHz gain-bandwidth product. Its 23 µA quiescent current reduces the amplifier's contribution to standby demand, and rail-to-rail input operation can make better use of the available sensor signal range in compact systems. Use the amplifier to condition outputs from resistive sensors, dividers, or transducers before conversion by an ADC. Select feedback resistors to manage bias-current error and output loading, and place local supply decoupling close to the amplifier to reduce supply noise and improve transient response.
推薦
Audio and Control-Signal Amplification
TLV2451ID can amplify low-level audio or control signals in compact, power-conscious circuits. Its rail-to-rail input and output operation is useful when signal levels approach the available supply range, and the 220 kHz gain-bandwidth product covers many audio and low-frequency control applications. The 23 µA quiescent current limits standing consumption in always-on equipment. Design the feedback network for the intended gain and bandwidth, maintain headroom for the required output peak level, and confirm that the selected operating point remains stable with the source impedance, load, and bypass capacitance used in the final layout.
推薦
推薦產品摘要
工程參考資料,適用於 TLV2451ID — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | TLV2451CDR |
|---|---|---|
| Package | 8-SOIC | 8-SOIC |
| Brand | Texas Instruments | Texas Instruments |
| Amplifier Type | Single operational amplifier | Single operational amplifier |
| Supply Voltage | 6 V | 6 V |
| Gain-Bandwidth Product | 220 kHz | 220 kHz |
| Quiescent Current | 23 µA per channel | 23 µA per channel |
| Input Common-Mode Range | Rail-to-rail | Rail-to-rail |
| Output Swing | Rail-to-rail | Rail-to-rail |
| Shipping Suffix | ID | CDR |
主要差異化特點
- Low quiescent current with useful gain-bandwidth performance (對比TLV2451CDR)
- Rail-to-rail input and output operation (對比TLV2451CDR)
- Compact single-amplifier implementation (對比TLV2451CDR)
設計說明
Place the supply-bypass capacitor as close as practical to the TLV2451ID power and ground pins, and route the return path without sharing long current paths with sensitive inputs. For an 8-SOIC layout, confirm the physical pin numbering and exposed functional differences from the manufacturer pin-description table before assigning signals. Keep feedback resistors close to the amplifier where practical to reduce parasitic pickup and sensitivity to board contamination.
The TLV2451ID's 23 µA quiescent current makes supply planning straightforward for low-power systems, but total current also includes output-current demand and input-bias effects. Do not treat the quiescent-current figure as maximum supply consumption. Check the datasheet output-current capability against the load and ensure the 6 V device is operated within its absolute maximum and common-mode limits.
Do not assume that rail-to-rail input operation permits every input voltage under every output condition; common-mode range, output swing, and gain are interdependent. Likewise, a 220 kHz gain-bandwidth product does not guarantee stable operation at every closed-loop gain or capacitive load. Use the manufacturer's recommended stability test conditions and verify the final design with the intended source impedance, load, bypass capacitor, and PCB layout.
Unused inputs must be connected to a defined potential rather than left floating. For low-level sensor interfaces, check input-bias-current effects and choose feedback resistors that balance bias-current cancellation against thermal noise and sensitivity to board leakage. Short signal traces, a quiet ground reference, and physical separation from switching nodes can prevent the low-power rail-to-rail stage from amplifying unwanted interference.
合規資訊
No explicit compliance declarations were identified for the exact TLV2451ID ordering code. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals status with the manufacturer before final regulatory qualification.