Texas Instruments

TLV2451ID - 6V 220kHz Low-Power RRIO Op Amp | Texas Instruments

Référence : TLV2451ID ✓ Actif
6 V Vdss 23 µA per channel Id 8-pin SOIC Package
MOQ : 1 |

TLV2451ID Présentation

The Texas Instruments TLV2451ID is a single-amplifier, 6 V, low-power operational amplifier featuring rail-to-rail input and output operation, a 220 kHz gain-bandwidth product, and a low quiescent current of 23 µA. The device is offered in an 8-pin SOIC package for general-purpose analog signal conditioning.

An operational amplifier is a voltage-controlled differential amplifier used to amplify, buffer, filter, or compare analog signals. The TLV2451 belongs to the rail-to-rail input/output operational-amplifier family and sits within the broader hierarchy of linear amplifiers, analog amplifiers, and semiconductor signal-conditioning devices. Rail-to-rail input capability supports signal operation near the supply rails, while rail-to-rail output capability helps preserve output swing in low-voltage systems.

The principal features of the TLV2451 are its 6 V supply rating, 23 µA quiescent current, and 220 kHz gain-bandwidth product. The low quiescent current makes the amplifier suitable for systems where supply efficiency and standby consumption are important. Its 220 kHz gain-bandwidth product provides useful bandwidth for low-frequency signal conditioning, instrumentation, filtering, and general analog control tasks. The low-power operating characteristics make the device particularly relevant to portable and energy-conscious designs.

The TLV2451ID combines low supply current with rail-to-rail input and output behavior in one amplifier channel. This combination allows a circuit to handle signals close to the available supply-voltage range without adding a second amplifier for buffering. Because the device is packaged in an 8-pin SOIC, it supports conventional surface-mount assembly and PCB routing at a higher pin count than the smaller SOT-23 and MSOP package options associated with other members of the TLV245x family.

Typical applications include low-power sensor conditioning, portable measurement systems, analog filtering, voltage buffering, threshold comparison, and low-energy industrial or embedded interfaces. In a sensor front end, the amplifier can provide gain while operating at low quiescent current. In a filter or buffer, its 220 kHz gain-bandwidth product is useful for signals that do not require high-speed operation.

Designers should evaluate the complete operating point, including supply voltage, output swing, load, noise, stability, and the desired closed-loop gain. Decoupling capacitors should be placed close to the supply pins, and unused inputs must be connected to a defined potential. Because rail-to-rail operation and output swing are distinct concerns, confirm the datasheet limits for the selected supply and load conditions.

This page organizes the key TLV2451ID characteristics, sourcing guidance, package information, and design considerations into a practical engineering reference. It also identifies confirmed related family members while clearly separating direct drop-in options from variants that do not provide enough evidence for unrestricted replacement.

Alternatives de remplacement direct pour TLV2451ID — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec TLV2451ID (même facteur de forme et même empreinte) — différant par Amplifier Type, Input Common-Mode Range, Output Swing.

Texas Instruments
Amplifier Type: Single general-purpose operational amplifier
Input Common-Mode Range: Rail-to-rail input
Output Swing: Rail-to-rail output
Comparer avec TLV2451ID →

TLV2451CDR

✅ Remplacement direct
📦 8-SOIC
Temperature-grade suffix differs from TLV2451ID; operating-temperature qualification must match the target design

📋 Alternative de référence (hors catalogue)

TLV2451ID Valeurs maximales et caractéristiques électriques

Amplifier Type Single operational amplifier
Tension d'alimentation 6 V
Gain-Bandwidth Product 220 kHz
Courant de repos 23 µA per channel
Input Common-Mode Range Rail-to-rail
Output Swing Rail-to-rail
Boîtier 8-pin SOIC
Type de montage Surface mount
Number of Amplifiers 1
Product Category General-purpose operational amplifier
Shutdown Capability Available in the TLV245x family; TLV2451-specific status requires datasheet confirmation

Guide de configuration des broches du TLV2451ID 8-pin soic

Configuration des broches du TLV2451ID (boîtier 8-pin soic). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.

Schéma de brochage du boîtier 8-pin soic pour le TLV2451ID

Aucune donnée de brochage détaillée disponible pour TLV2451ID.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

TLV2451ID convient pour 6 applications: Low-Power Sensor Signal Conditioning, Portable Analog Buffering, Low-Frequency Active Filtering, Industrial Threshold Detection, Battery-Powered Data Acquisition, Audio and Control-Signal Amplification.

🧩

Low-Power Sensor Signal Conditioning

The TLV2451ID fits sensor interfaces that need gain or buffering without imposing a high standing-current demand. Its 23 µA quiescent current is valuable in battery-powered measurement systems, while rail-to-rail input operation allows signals near the supply rails to be handled more effectively than with a fixed common-mode input amplifier. The 220 kHz gain-bandwidth product is suitable for common temperature, pressure, and slow-motion sensing signals. In implementation, connect the sensor output to the appropriate amplifier input, establish the required gain with feedback components, and verify the sensor output range against the amplifier's common-mode limits.

📱

Portable Analog Buffering

TLV2451ID is suitable for buffering sensor, divider, or reference outputs in portable equipment where amplifier current contributes directly to battery life. Rail-to-rail input and output behavior preserves useful signal range in compact, low-voltage systems, and the 220 kHz gain-bandwidth product is more than adequate for many slow analog measurements. Its 23 µA quiescent current helps limit idle consumption. Place the amplifier in a voltage-follower configuration when source and sink capability rather than voltage gain is required, and confirm the output-current and capacitive-load limits for the intended source impedance.

🌐

Low-Frequency Active Filtering

The TLV2451ID can implement first-order and moderate-frequency active filters where the design does not require the bandwidth of a high-speed amplifier. Its 220 kHz gain-bandwidth product provides closed-loop bandwidth headroom for filtering tasks involving slow sensor signals, audio-band control loops, or low-frequency communications paths. The 23 µA quiescent current also benefits multi-stage filter designs by limiting the power penalty of each amplifier stage. Choose resistor and capacitor values around the desired cutoff, then check loop gain, phase margin, output swing, and capacitive-load stability using the manufacturer's test guidance.

🏭

Industrial Threshold Detection

TLV2451ID is appropriate for comparing a scaled sensor or control signal with a reference when low standby consumption and rail-to-rail input range are important. The 6 V device can operate within compact industrial-control signal chains, while the single-amplifier 8-SOIC package keeps the footprint practical for moderate-density boards. The 220 kHz gain-bandwidth product supports threshold signals that change slowly relative to the amplifier's bandwidth. In a comparator-like circuit, include hysteresis or filtering to prevent repeated switching, and verify output-level compatibility with the logic or relay circuit driven by the output.

⚡

Battery-Powered Data Acquisition

The TLV2451ID supports low-power data-acquisition front ends that measure analog quantities slowly enough for a 220 kHz gain-bandwidth product. Its 23 µA quiescent current reduces the amplifier's contribution to standby demand, and rail-to-rail input operation can make better use of the available sensor signal range in compact systems. Use the amplifier to condition outputs from resistive sensors, dividers, or transducers before conversion by an ADC. Select feedback resistors to manage bias-current error and output loading, and place local supply decoupling close to the amplifier to reduce supply noise and improve transient response.

🎧

Audio and Control-Signal Amplification

TLV2451ID can amplify low-level audio or control signals in compact, power-conscious circuits. Its rail-to-rail input and output operation is useful when signal levels approach the available supply range, and the 220 kHz gain-bandwidth product covers many audio and low-frequency control applications. The 23 µA quiescent current limits standing consumption in always-on equipment. Design the feedback network for the intended gain and bandwidth, maintain headroom for the required output peak level, and confirm that the selected operating point remains stable with the source impedance, load, and bypass capacitance used in the final layout.

Récapitulatif des produits recommandés

TLV2451IDR Tape-and-reel ordering option in the same TLV2451 family Utilisé dans : Low-Power Sensor Signal Conditioning, Portable Analog Buffering, Industrial Threshold Detection, Battery-Powered Data Acquisition TLV2451CDR Related single-amplifier family variant Utilisé dans : Low-Power Sensor Signal Conditioning, Low-Frequency Active Filtering, Industrial Threshold Detection, Audio and Control-Signal Amplification
What are the key specifications of TLV2451ID that engineers should know?
The TLV2451ID is a single 6 V operational amplifier with a 220 kHz gain-bandwidth product, 23 µA quiescent current, and rail-to-rail input and output operation in an 8-pin SOIC package. According to the Texas Instruments TLV2451 product page, these characteristics position the device for low-power general-purpose analog signal-conditioning applications. Its low quiescent current is especially relevant to battery-powered and energy-conscious systems, while the 220 kHz gain-bandwidth product supports moderate-frequency filtering, buffering, and gain stages.
Where can I download the TLV2451ID datasheet PDF?
The official TLV2451 datasheet is available from Texas Instruments at https://www.ti.com/lit/gpn/TLV2451. This manufacturer document covers the TLV245x amplifier family, including electrical characteristics, typical performance curves, application information, and ordering information. Use the package-specific ordering and pin-configuration sections when assigning signals for TLV2451ID, rather than relying on a family-level pin diagram for a different package option.
What is the supply voltage of the TLV2451ID?
The TLV2451ID supports operation from a 6 V supply rating as identified in the Texas Instruments TLV2451 product listing. The related TLV245x family also includes lower-voltage single, dual, and quad devices, so the exact suffix must be checked before applying the family description to a different orderable MPN. Confirm absolute maximum ratings and operating limits in the manufacturer datasheet for the specific TLV2451ID configuration before finalizing the power architecture.
Why is the 23 µA quiescent current of TLV2451ID important?
The 23 µA quiescent current makes the TLV2451ID attractive for low-power analog systems because the amplifier consumes very little supply current when processing signals. According to the Texas Instruments product description, the device combines this low current with 220 kHz gain-bandwidth performance. The benefit is especially clear in portable instrumentation, sensor interfaces, and battery-operated equipment where amplifier supply consumption can materially affect operating time.
Is TLV2451ID suitable for rail-to-rail signal conditioning?
Yes. The TLV2451ID provides rail-to-rail input and output operation, allowing input signals close to either supply rail to be processed and allowing the output to approach the supply limits. Texas Instruments identifies the device as an RRIO operational amplifier in its product description. Rail-to-rail operation does not guarantee an exact zero-volt or full-supply output at every load, so verify output-swing limits and distortion against the intended circuit conditions.
What can replace TLV2451ID?
TLV2451IDR is a closely related ordering code for the same TLV2451 family and 8-SOIC device, differing primarily in its tape-and-reel shipping format rather than adding a meaningful electrical alternative. TLV2451CDR is another identified family member that may differ in temperature grade. Neither should be treated as an unrestricted substitute without comparing the datasheet ordering table, temperature range, supply limits, and shutdown configuration. Use the Request a Quote form on this page to ask for a specifically qualified replacement.
Is TLV2451ID the same as TLV2451IDR?
TLV2451ID and TLV2451IDR refer to closely related orderable versions of the Texas Instruments TLV2451 amplifier in the 8-SOIC family, with the R suffix identifying a tape-and-reel shipping option. Their electrical suitability for an existing PCB must still be checked against the manufacturer ordering information, including temperature grade and package details. For sourcing, request the exact suffix and delivery format through the Request a Quote form on this page.
TLV2451ID vs TLV2451CDR: which is better for a temperature-sensitive design?
The correct choice depends on the temperature grade and ordering suffix, because TLV2451ID and TLV2451CDR are not identical orderable MPNs even though both belong to the TLV245x amplifier family. Texas Instruments may assign different grade suffixes to commercial and temperature-qualified variants. Review the ordering table and operating-temperature limits in the TLV2451 datasheet, then select the variant whose specified temperature range covers the product's worst-case ambient and enclosure conditions.
When should I choose TLV2451ID over a higher-speed operational amplifier?
Choose TLV2451ID when low quiescent current is more valuable than wideband performance. Its 23 µA quiescent current and 220 kHz gain-bandwidth product are suited to general-purpose low-power signal conditioning, whereas a higher-speed amplifier may consume more current and add bandwidth that the application does not need. The trade-off is reduced capability for wideband, fast-slew, or high-phase-margin demanding closed-loop configurations.
What is the best replacement for TLV2451ID in an existing 8-SOIC PCB?
A valid replacement must match the 8-SOIC footprint, pin functions, supply rating, input and output behavior, output-current capability, stability requirements, and temperature range. The confirmed related ordering codes are TLV2451IDR and TLV2451CDR, but the R option changes the shipping format and the C option can change the temperature grade. Review the TLV2451 ordering table and datasheet before assigning either as a drop-in replacement. The Request a Quote form can be used to request a specifically matched source.
Can TLV2451CDR replace TLV2451ID?
TLV2451CDR may be considered only after verifying its temperature grade and device functions against the TLV2451ID requirements. Both names appear within the TLV245x family and the related comparison identifies their shared low-power rail-to-rail architecture, but the ordering suffix can denote a different qualification level. A PCB-level replacement also requires exact pin compatibility and unchanged shutdown behavior. Do not approve the substitution solely from the family name or package outline.
How should TLV2451ID be used in a low-power sensor signal conditioner?
Use the TLV2451ID as the gain or buffering stage following the sensor, with the signal routed into its rail-to-rail input range. The 23 µA quiescent current limits the amplifier's standing supply demand, while the 220 kHz gain-bandwidth product is suitable for sensors whose bandwidth does not approach the amplifier's upper practical limits. Confirm the sensor output range, required gain, noise, and input bias current before setting resistors or adding filtering.
Where to buy TLV2451ID online?
Use the Request a Quote form on this page to request TLV2451ID sourcing, current availability, lead time, and order quantity from XAIPART. The exact MPN includes the package and temperature-grade suffix, so include TLV2451ID in the request and specify whether the order must be in a tube, tape-and-reel, or another approved shipping format. This avoids accidentally requesting TLV2451IDR or another family member with different ordering conditions.
What is the price of TLV2451ID?
Current TLV2451ID pricing is not stated on this page because commercial pricing changes with quantity, package, and market conditions. Use the Request a Quote form on this page and enter the exact MPN TLV2451ID together with the required quantity and shipping format. XAIPART will return the applicable quotation rather than presenting a static unit-price table that may not match the selected order configuration.
What is the lead time for TLV2451ID?
Request the current lead time for TLV2451ID through the Request a Quote form on this page. Lead time can depend on the exact ordering suffix, quantity, and requested delivery format, including whether TLV2451ID is required in a tube or tape-and-reel packaging. Provide the target quantity and required delivery date with the inquiry so that XAIPART can confirm the appropriate supply position for the exact component.
Is TLV2451ID in stock?
Current inventory for TLV2451ID should be confirmed through the Request a Quote form on this page. The form should receive the exact MPN, required quantity, and preferred shipping format so the response reflects the appropriate TLV2451ID configuration. Do not substitute TLV2451IDR automatically, because the R suffix identifies a different shipping format and procurement requirements may differ from a tube-packed order.
Does TLV2451ID include shutdown functionality?
The verified TLV245x family documentation is titled for operational amplifiers with shutdown, but the TLV2451ID-specific shutdown configuration must be confirmed in the pin description and ordering information for the exact package. Texas Instruments states that some family members are optimized for shutdown operation while also describing devices with different shutdown arrangements. Use the TLV2451ID pin table to determine whether shutdown is available and how it is controlled before altering the board.

Données de référence d'ingénierie pour TLV2451ID — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose TLV2451ID for low-power, general-purpose analog signal conditioning that benefits from rail-to-rail input and output operation. Its 23 µA quiescent current is suitable for portable, battery-operated, and always-on designs, while the 220 kHz gain-bandwidth product accommodates many sensor, filtering, buffering, and control applications. Review TLV2451CDR when the product's temperature-grade requirements point to that ordering option and its pin functions remain compatible with the existing 8-SOIC layout. TLV2451IDR is primarily a tape-and-reel procurement option for the same family rather than a distinct engineering alternative. Before finalizing any substitution, compare the exact ordering suffix, temperature range, absolute maximum ratings, common-mode range, output swing, output current, and shutdown configuration in the manufacturer datasheet. This approach avoids treating similar family names as automatically interchangeable and ensures the selected amplifier meets both electrical and procurement requirements.

Comparaison avec les alternatives

Paramètre Ce produit TLV2451CDR
Package 8-SOIC 8-SOIC
Brand Texas Instruments Texas Instruments
Amplifier Type Single operational amplifier Single operational amplifier
Supply Voltage 6 V 6 V
Gain-Bandwidth Product 220 kHz 220 kHz
Quiescent Current 23 µA per channel 23 µA per channel
Input Common-Mode Range Rail-to-rail Rail-to-rail
Output Swing Rail-to-rail Rail-to-rail
Shipping Suffix ID CDR

Principaux différenciateurs

  • Low quiescent current with useful gain-bandwidth performance (vs TLV2451CDR)
  • Rail-to-rail input and output operation (vs TLV2451CDR)
  • Compact single-amplifier implementation (vs TLV2451CDR)

Notes de conception

Place the supply-bypass capacitor as close as practical to the TLV2451ID power and ground pins, and route the return path without sharing long current paths with sensitive inputs. For an 8-SOIC layout, confirm the physical pin numbering and exposed functional differences from the manufacturer pin-description table before assigning signals. Keep feedback resistors close to the amplifier where practical to reduce parasitic pickup and sensitivity to board contamination.

The TLV2451ID's 23 µA quiescent current makes supply planning straightforward for low-power systems, but total current also includes output-current demand and input-bias effects. Do not treat the quiescent-current figure as maximum supply consumption. Check the datasheet output-current capability against the load and ensure the 6 V device is operated within its absolute maximum and common-mode limits.

Do not assume that rail-to-rail input operation permits every input voltage under every output condition; common-mode range, output swing, and gain are interdependent. Likewise, a 220 kHz gain-bandwidth product does not guarantee stable operation at every closed-loop gain or capacitive load. Use the manufacturer's recommended stability test conditions and verify the final design with the intended source impedance, load, bypass capacitor, and PCB layout.

Unused inputs must be connected to a defined potential rather than left floating. For low-level sensor interfaces, check input-bias-current effects and choose feedback resistors that balance bias-current cancellation against thermal noise and sensitivity to board leakage. Short signal traces, a quiet ground reference, and physical separation from switching nodes can prevent the low-power rail-to-rail stage from amplifying unwanted interference.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

No explicit compliance declarations were identified for the exact TLV2451ID ordering code. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals status with the manufacturer before final regulatory qualification.

Données vérifiées le : 2026-11-15 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

TLV2451ID datasheet TLV2451ID pinout TLV2451ID datasheet pdf TLV2451ID equivalent TLV2451ID replacement TLV2451ID cross reference TLV2451ID vs TLV2451CDR TLV2451ID price TLV2451ID stock Texas Instruments TLV2451ID TLV2451 8-SOIC pinout TLV2451ID low power op amp

Composants & termes associés

Texas Instruments TLV2451ID TLV2451IDR TLV2451CDR TLV2451 operational amplifier single amplifier rail-to-rail input rail-to-rail output RRIO amplifier low-power amplifier analog signal conditioning gain-bandwidth product quiescent current 6 V supply 220 kHz bandwidth 23 µA quiescent current 8-SOIC package surface mount sensor interface active filter voltage buffer industrial control battery-powered equipment
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ