TUSB1310ZAY - 5Gbps USB 3.0 Transceiver | Texas Instruments
MPN: TUSB1310ZAY ✓ सक्रियTUSB1310ZAY अवलोकन
A USB 3.0 SuperSpeed transceiver is the interface device that converts between a host or device controller and the physical USB data path. It belongs to the USB interface IC hierarchy, connects to digital logic through PIPE3 or ULPI, and handles the high-speed physical signaling required by the USB 3.0 protocol. The TUSB1310 therefore sits between a USB link-layer controller and the external connector, power, clock, and signal-routing network.
The principal documented features are one USB 3.0 transceiver port, a 5.0-Gbps operating speed, support for both PIPE3 and ULPI controller interfaces, and operation from either a crystal oscillator or an external reference clock. Its four documented reference-clock choices allow the system designer to select a clock appropriate to the controller ecosystem. The device can also provide a clock to the USB link-layer controller, reducing the number of separate clocking arrangements considered in a reference design.
The TUSB1310ZAY uses a 175-NFBGA package, identified by the ordering code as a 12 x 12 mm device. This dense ball-grid arrangement is intended for compact systems requiring numerous high-speed connections. Placement is a signal-integrity-critical task because USB 3.0 differential pairs demand short, length-matched routing, appropriate reference planes, and carefully controlled return paths. The transceiver’s interface selection also affects host-versus-device implementation and determines how the controller-facing pins are connected.
Typical applications include USB 3.0 docking stations, high-speed data-transfer products, storage systems, test equipment, and embedded computing platforms that use a USB link-layer controller. The transceiver can suit designs requiring either PIPE3 connectivity for parallel controller integration or ULPI connectivity for a compact register-oriented interface. It is particularly relevant where a system needs one USB 3.0 port and a selectable reference-clock arrangement rather than a multi-port hub transceiver.
When designing around the TUSB1310ZAY, verify the complete pin configuration, electrical limits, crystal or reference-clock requirements, and decoupling recommendations in the manufacturer datasheet before releasing PCB artwork. High-speed differential routing should be validated against the controller and connector reference designs because package placement, via transitions, layer stackup, and clock jitter can materially affect signal integrity.
This page organizes the documented TUSB1310ZAY capabilities, package information, interface options, engineering applications, and confirmed same-package alternatives. It also highlights where a manufacturer data sheet must remain the controlling reference for pin assignment, compliance, environmental limits, and layout implementation.
के लिए ड्रॉप-इन विकल्प TUSB1310ZAY — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं TUSB1310ZAY (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Clock Source, Product Type.
TUSB1310AZAY
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →TUSB1310ZAY विशेषताएं
| Product Type | USB 3.0 SuperSpeed physical-layer transceiver |
| Number of Ports | 1 transceiver port |
| Maximum Data Rate | 5.0 Gbps |
| USB Generation | USB 3.0 |
| Controller Interface | PIPE3 and ULPI |
| Clock Source | Single crystal or external reference clock |
| Selectable Reference Clock Frequencies | 20, 25, 30, and 40 MHz |
| Clock Output to USB Link-Layer Controller | Supported |
| Package Type | 175-NFBGA |
| Package Dimensions | 12 x 12 mm |
| Ball Count | 175 balls |
| माउंटिंग प्रकार | Surface mount |
TUSB1310ZAY 12 x 12 mm पिन कॉन्फ़िगरेशन गाइड
TUSB1310ZAY (12 x 12 mm पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: TUSB1310ZAY.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
TUSB1310ZAY के लिए उपयुक्त है 6 अनुप्रयोगs: USB 3.0 Docking Stations, High-Speed Data Transfer Products, USB Storage Gateways, Embedded USB 3.0 Controllers, USB Test and Measurement Equipment, USB-C to Legacy USB 3.0 Bridges.
USB 3.0 Docking Stations
The TUSB1310ZAY fits a single-port SuperSpeed section of a docking station when the design uses a compatible USB link-layer controller with either PIPE3 or ULPI connectivity. Its 5.0-Gbps transceiver rate supports USB 3.0 data paths, while selectable 20, 25, 30, and 40 MHz reference-clock frequencies support multiple controller clock arrangements. Using a dedicated single-port transceiver can simplify the division of labor between a host controller and downstream hub circuitry. The principal engineering constraint is USB 3.0 signal integrity: short differential routes, solid reference planes, and symmetrical connector transitions should follow the manufacturer’s reference layout.
अनुशंसित
High-Speed Data Transfer Products
A product that moves data between a host and USB 3.0 storage can use the TUSB1310ZAY as the physical-layer element between a USB controller and the external connector. The device’s documented 5.0-Gbps maximum rate and PIPE3 or ULPI interface options make it suitable for controller-based architectures where the link layer and physical layer are separate devices. System-level throughput still depends on the controller, firmware, storage, connector, and cable path. High-speed differential routing should be treated as a controlled-impedance design and checked for loss and crosstalk with the complete board stackup.
अनुशंसित
USB Storage Gateways
The TUSB1310ZAY can provide the SuperSpeed physical connection in a storage gateway or protocol-conversion appliance that separates USB link-layer control from physical signaling. Its one-port, 5.0-Gbps configuration is appropriate for a single upstream or downstream USB 3.0 path, while PIPE3 and ULPI allow the board designer to align the interface with the selected controller. Reference-clock selection is especially important in multi-function gateways because clock architecture affects component count and synchronization. Use the manufacturer data manual to confirm clock jitter, startup, and application-circuit requirements before layout release.
अनुशंसित
Embedded USB 3.0 Controllers
The TUSB1310ZAY is appropriate for embedded systems that use a dedicated USB link-layer controller and require a separate 5.0-Gbps SuperSpeed physical layer. PIPE3 offers a parallel controller-oriented connection for systems designed around that interface, while ULPI offers a compact register-oriented option. The transceiver accepts a crystal or external reference clock and documents 20, 25, 30, and 40 MHz choices, allowing the design to follow the controller ecosystem. Because the package is a 175-NFBGA, placement and escape-routing quality are central to achieving reliable high-speed operation.
अनुशंसित
USB Test and Measurement Equipment
The TUSB1310ZAY can be used in test equipment that requires a controllable USB 3.0 SuperSpeed interface alongside a separate link-layer controller. Its documented 5.0-Gbps rate, selectable reference-clock frequencies, and PIPE3 or ULPI connectivity support laboratory systems that must exercise USB 3.0 physical behavior. The transceiver’s ability to provide a clock to the link-layer controller can simplify clock distribution in a multi-board instrument. Measurement accuracy will depend on test-path losses, connector launch geometry, return loss, and whether the implemented clock meets the controller and transceiver timing requirements.
अनुशंसित
USB-C to Legacy USB 3.0 Bridges
The TUSB1310ZAY can support a bridge design in which a USB-C-facing implementation connects to a USB 3.0 controller and physical-layer section. The PIPE3 interface can suit controller arrangements optimized for parallel throughput, while ULPI can suit designs that prioritize a compact register interface. The bridge must coordinate lane orientation, controller behavior, connector configuration, power roles, and protocol translation. The transceiver itself supplies the 5.0-Gbps physical layer rather than handling USB protocol conversion, so a controller and appropriate Type-C port controller or multiplexer remain necessary for the complete bridge function.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा TUSB1310ZAY — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | TUSB1310AZAY |
|---|---|---|
| Package | 175-NFBGA (12 x 12 mm) | 175-NFBGA (12 x 12 mm) |
| Brand | Texas Instruments | Texas Instruments |
| Product Type | USB 3.0 SuperSpeed transceiver | USB 3.0 SuperSpeed transceiver |
| Number of Transceiver Ports | 1 | 1 |
मुख्य विशेषताएँ
- Combines two controller interfaces in one transceiver (बनामTUSB1310AZAY)
- Supports four documented reference-clock selections (बनामTUSB1310AZAY)
- Can supply a clock to the USB link-layer controller (बनामTUSB1310AZAY)
डिज़ाइन नोट्स
Treat the USB 3.0 differential paths as controlled-impedance, length-sensitive interconnects. Follow the Texas Instruments TUSB1310 reference layout for ball escape order, connector and package alignment, via transitions, and return-path continuity. Keep the transceiver, crystal or clock source, and decoupling network close together, and avoid forcing USB traces through plane splits or poorly referenced vias. Full-stackup simulation and signal-integrity validation should include the selected connector launch and enclosure or cable environment.
Do not assume that a matching package and USB data rate prove that an alternative ordering code is a drop-in replacement. Compare every assigned ball, supply rail, signal type, clock input, clock output, control signal, and documented electrical limit against the released schematic. For TUSB1310ZAY and TUSB1310AZAY, the available records establish the same 175-NFBGA package and USB 3.0 transceiver class, but the remaining ordering-code differences require confirmation from the manufacturer documentation before substitution.
Use the power topology, supply rails, and decoupling configuration specified in the manufacturer data manual. Place low-inductance ceramic bypass capacitors immediately at the appropriate power and ground balls, provide the documented bulk capacitance, and keep high-current return paths away from sensitive clock and differential-signal regions. Validate steady-state and transient current against the selected USB operating mode. The exact rail voltage and capacitor values are not stated in the product listing and must not be inferred from generic USB designs.
Select the crystal or external clock according to the supported 20, 25, 30, or 40 MHz reference frequencies, and verify tolerance, jitter, startup time, load capacitance, and drive level against the data manual. Keep the clock path short and isolate it from noisy switching nodes. If the transceiver supplies a clock to the link-layer controller, analyze both devices’ input and output requirements together, including edge rate, return loss, and the possibility of clock-loop or shared-impedance problems.
अनुपालन जानकारी
The manufacturer product page and distributor listings do not explicitly state RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification status for this ordering code. AEC-Q100 is not applicable unless a specifically qualified ordering option is selected.