TUSB1310ZAY - 5Gbps USB 3.0 Transceiver | Texas Instruments
料号: TUSB1310ZAY ✓ 量产中TUSB1310ZAY 概述
A USB 3.0 SuperSpeed transceiver is the interface device that converts between a host or device controller and the physical USB data path. It belongs to the USB interface IC hierarchy, connects to digital logic through PIPE3 or ULPI, and handles the high-speed physical signaling required by the USB 3.0 protocol. The TUSB1310 therefore sits between a USB link-layer controller and the external connector, power, clock, and signal-routing network.
The principal documented features are one USB 3.0 transceiver port, a 5.0-Gbps operating speed, support for both PIPE3 and ULPI controller interfaces, and operation from either a crystal oscillator or an external reference clock. Its four documented reference-clock choices allow the system designer to select a clock appropriate to the controller ecosystem. The device can also provide a clock to the USB link-layer controller, reducing the number of separate clocking arrangements considered in a reference design.
The TUSB1310ZAY uses a 175-NFBGA package, identified by the ordering code as a 12 x 12 mm device. This dense ball-grid arrangement is intended for compact systems requiring numerous high-speed connections. Placement is a signal-integrity-critical task because USB 3.0 differential pairs demand short, length-matched routing, appropriate reference planes, and carefully controlled return paths. The transceiver’s interface selection also affects host-versus-device implementation and determines how the controller-facing pins are connected.
Typical applications include USB 3.0 docking stations, high-speed data-transfer products, storage systems, test equipment, and embedded computing platforms that use a USB link-layer controller. The transceiver can suit designs requiring either PIPE3 connectivity for parallel controller integration or ULPI connectivity for a compact register-oriented interface. It is particularly relevant where a system needs one USB 3.0 port and a selectable reference-clock arrangement rather than a multi-port hub transceiver.
When designing around the TUSB1310ZAY, verify the complete pin configuration, electrical limits, crystal or reference-clock requirements, and decoupling recommendations in the manufacturer datasheet before releasing PCB artwork. High-speed differential routing should be validated against the controller and connector reference designs because package placement, via transitions, layer stackup, and clock jitter can materially affect signal integrity.
This page organizes the documented TUSB1310ZAY capabilities, package information, interface options, engineering applications, and confirmed same-package alternatives. It also highlights where a manufacturer data sheet must remain the controlling reference for pin assignment, compliance, environmental limits, and layout implementation.
直接替换替代料: TUSB1310ZAY ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: TUSB1310ZAY (相同外形与封装尺寸) ——差异在于 Clock Source, Product Type.
TUSB1310AZAY
✅ 直接替换联系询价
查看数据手册 →TUSB1310ZAY 规格参数
| Product Type | USB 3.0 SuperSpeed physical-layer transceiver |
| Number of Ports | 1 transceiver port |
| Maximum Data Rate | 5.0 Gbps |
| USB Generation | USB 3.0 |
| Controller Interface | PIPE3 and ULPI |
| Clock Source | Single crystal or external reference clock |
| Selectable Reference Clock Frequencies | 20, 25, 30, and 40 MHz |
| Clock Output to USB Link-Layer Controller | Supported |
| Package Type | 175-NFBGA |
| Package Dimensions | 12 x 12 mm |
| Ball Count | 175 balls |
| 安装类型 | Surface mount |
TUSB1310ZAY 12 x 12 mm 引脚配置指南
TUSB1310ZAY(12 x 12 mm 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: TUSB1310ZAY.
请参阅 数据手册 以查看完整引脚配置。
典型应用
TUSB1310ZAY 适用于 6 应用s: USB 3.0 Docking Stations, High-Speed Data Transfer Products, USB Storage Gateways, Embedded USB 3.0 Controllers, USB Test and Measurement Equipment, USB-C to Legacy USB 3.0 Bridges.
USB 3.0 Docking Stations
The TUSB1310ZAY fits a single-port SuperSpeed section of a docking station when the design uses a compatible USB link-layer controller with either PIPE3 or ULPI connectivity. Its 5.0-Gbps transceiver rate supports USB 3.0 data paths, while selectable 20, 25, 30, and 40 MHz reference-clock frequencies support multiple controller clock arrangements. Using a dedicated single-port transceiver can simplify the division of labor between a host controller and downstream hub circuitry. The principal engineering constraint is USB 3.0 signal integrity: short differential routes, solid reference planes, and symmetrical connector transitions should follow the manufacturer’s reference layout.
推荐
High-Speed Data Transfer Products
A product that moves data between a host and USB 3.0 storage can use the TUSB1310ZAY as the physical-layer element between a USB controller and the external connector. The device’s documented 5.0-Gbps maximum rate and PIPE3 or ULPI interface options make it suitable for controller-based architectures where the link layer and physical layer are separate devices. System-level throughput still depends on the controller, firmware, storage, connector, and cable path. High-speed differential routing should be treated as a controlled-impedance design and checked for loss and crosstalk with the complete board stackup.
推荐
USB Storage Gateways
The TUSB1310ZAY can provide the SuperSpeed physical connection in a storage gateway or protocol-conversion appliance that separates USB link-layer control from physical signaling. Its one-port, 5.0-Gbps configuration is appropriate for a single upstream or downstream USB 3.0 path, while PIPE3 and ULPI allow the board designer to align the interface with the selected controller. Reference-clock selection is especially important in multi-function gateways because clock architecture affects component count and synchronization. Use the manufacturer data manual to confirm clock jitter, startup, and application-circuit requirements before layout release.
推荐
Embedded USB 3.0 Controllers
The TUSB1310ZAY is appropriate for embedded systems that use a dedicated USB link-layer controller and require a separate 5.0-Gbps SuperSpeed physical layer. PIPE3 offers a parallel controller-oriented connection for systems designed around that interface, while ULPI offers a compact register-oriented option. The transceiver accepts a crystal or external reference clock and documents 20, 25, 30, and 40 MHz choices, allowing the design to follow the controller ecosystem. Because the package is a 175-NFBGA, placement and escape-routing quality are central to achieving reliable high-speed operation.
推荐
USB Test and Measurement Equipment
The TUSB1310ZAY can be used in test equipment that requires a controllable USB 3.0 SuperSpeed interface alongside a separate link-layer controller. Its documented 5.0-Gbps rate, selectable reference-clock frequencies, and PIPE3 or ULPI connectivity support laboratory systems that must exercise USB 3.0 physical behavior. The transceiver’s ability to provide a clock to the link-layer controller can simplify clock distribution in a multi-board instrument. Measurement accuracy will depend on test-path losses, connector launch geometry, return loss, and whether the implemented clock meets the controller and transceiver timing requirements.
推荐
USB-C to Legacy USB 3.0 Bridges
The TUSB1310ZAY can support a bridge design in which a USB-C-facing implementation connects to a USB 3.0 controller and physical-layer section. The PIPE3 interface can suit controller arrangements optimized for parallel throughput, while ULPI can suit designs that prioritize a compact register interface. The bridge must coordinate lane orientation, controller behavior, connector configuration, power roles, and protocol translation. The transceiver itself supplies the 5.0-Gbps physical layer rather than handling USB protocol conversion, so a controller and appropriate Type-C port controller or multiplexer remain necessary for the complete bridge function.
推荐
推荐产品汇总
工程参考数据: TUSB1310ZAY ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | TUSB1310AZAY |
|---|---|---|
| Package | 175-NFBGA (12 x 12 mm) | 175-NFBGA (12 x 12 mm) |
| Brand | Texas Instruments | Texas Instruments |
| Product Type | USB 3.0 SuperSpeed transceiver | USB 3.0 SuperSpeed transceiver |
| Number of Transceiver Ports | 1 | 1 |
关键差异点
- Combines two controller interfaces in one transceiver (对比 TUSB1310AZAY)
- Supports four documented reference-clock selections (对比 TUSB1310AZAY)
- Can supply a clock to the USB link-layer controller (对比 TUSB1310AZAY)
设计说明
Treat the USB 3.0 differential paths as controlled-impedance, length-sensitive interconnects. Follow the Texas Instruments TUSB1310 reference layout for ball escape order, connector and package alignment, via transitions, and return-path continuity. Keep the transceiver, crystal or clock source, and decoupling network close together, and avoid forcing USB traces through plane splits or poorly referenced vias. Full-stackup simulation and signal-integrity validation should include the selected connector launch and enclosure or cable environment.
Do not assume that a matching package and USB data rate prove that an alternative ordering code is a drop-in replacement. Compare every assigned ball, supply rail, signal type, clock input, clock output, control signal, and documented electrical limit against the released schematic. For TUSB1310ZAY and TUSB1310AZAY, the available records establish the same 175-NFBGA package and USB 3.0 transceiver class, but the remaining ordering-code differences require confirmation from the manufacturer documentation before substitution.
Use the power topology, supply rails, and decoupling configuration specified in the manufacturer data manual. Place low-inductance ceramic bypass capacitors immediately at the appropriate power and ground balls, provide the documented bulk capacitance, and keep high-current return paths away from sensitive clock and differential-signal regions. Validate steady-state and transient current against the selected USB operating mode. The exact rail voltage and capacitor values are not stated in the product listing and must not be inferred from generic USB designs.
Select the crystal or external clock according to the supported 20, 25, 30, or 40 MHz reference frequencies, and verify tolerance, jitter, startup time, load capacitance, and drive level against the data manual. Keep the clock path short and isolate it from noisy switching nodes. If the transceiver supplies a clock to the link-layer controller, analyze both devices’ input and output requirements together, including edge rate, return loss, and the possibility of clock-loop or shared-impedance problems.
合规信息
The manufacturer product page and distributor listings do not explicitly state RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification status for this ordering code. AEC-Q100 is not applicable unless a specifically qualified ordering option is selected.