Texas Instruments

TUSB1310ZAY - 5Gbps USB 3.0 Transceiver | Texas Instruments

Артикул: TUSB1310ZAY ✓ Активен
175-NFBGA Package Single crystal or external reference clock Speed
MOQ: 1 |

TUSB1310ZAY Обзор

The Texas Instruments TUSB1310ZAY is a single-port, 5.0-Gbps USB 3.0 SuperSpeed physical-layer transceiver with PIPE3 and ULPI interfaces, packaged in a 175-ball NFBGA measuring 12 x 12 mm. It accepts a single crystal or external reference clock and can supply a clock to a USB link-layer controller. According to the manufacturer product page, selectable reference-clock frequencies include 20, 25, 30, and 40 MHz, supporting integration into USB 3.0 systems that require a consolidated physical-layer and controller-interface solution.

A USB 3.0 SuperSpeed transceiver is the interface device that converts between a host or device controller and the physical USB data path. It belongs to the USB interface IC hierarchy, connects to digital logic through PIPE3 or ULPI, and handles the high-speed physical signaling required by the USB 3.0 protocol. The TUSB1310 therefore sits between a USB link-layer controller and the external connector, power, clock, and signal-routing network.

The principal documented features are one USB 3.0 transceiver port, a 5.0-Gbps operating speed, support for both PIPE3 and ULPI controller interfaces, and operation from either a crystal oscillator or an external reference clock. Its four documented reference-clock choices allow the system designer to select a clock appropriate to the controller ecosystem. The device can also provide a clock to the USB link-layer controller, reducing the number of separate clocking arrangements considered in a reference design.

The TUSB1310ZAY uses a 175-NFBGA package, identified by the ordering code as a 12 x 12 mm device. This dense ball-grid arrangement is intended for compact systems requiring numerous high-speed connections. Placement is a signal-integrity-critical task because USB 3.0 differential pairs demand short, length-matched routing, appropriate reference planes, and carefully controlled return paths. The transceiver’s interface selection also affects host-versus-device implementation and determines how the controller-facing pins are connected.

Typical applications include USB 3.0 docking stations, high-speed data-transfer products, storage systems, test equipment, and embedded computing platforms that use a USB link-layer controller. The transceiver can suit designs requiring either PIPE3 connectivity for parallel controller integration or ULPI connectivity for a compact register-oriented interface. It is particularly relevant where a system needs one USB 3.0 port and a selectable reference-clock arrangement rather than a multi-port hub transceiver.

When designing around the TUSB1310ZAY, verify the complete pin configuration, electrical limits, crystal or reference-clock requirements, and decoupling recommendations in the manufacturer datasheet before releasing PCB artwork. High-speed differential routing should be validated against the controller and connector reference designs because package placement, via transitions, layer stackup, and clock jitter can materially affect signal integrity.

This page organizes the documented TUSB1310ZAY capabilities, package information, interface options, engineering applications, and confirmed same-package alternatives. It also highlights where a manufacturer data sheet must remain the controlling reference for pin assignment, compliance, environmental limits, and layout implementation.

Аналоги без доработки для TUSB1310ZAY — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с TUSB1310ZAY (тот же форм-фактор и посадочное место) — отличается по Clock Source, Product Type.

Texas Instruments
Clock Source: Crystal or external reference clock
Product Type: Single-port SuperSpeed USB 3.0 physical-layer transceiver
Сравнить с TUSB1310ZAY →

TUSB1310AZAY

✅ Прямая замена
Texas Instruments
📦 175-NFBGA (12x12)
Single-port SuperSpeed USB 3.0 physical-layer transceiver · USB 3.0 · 5.0 Gbps · 1 port · PIPE and ULPI · 20, 25, 30, and 40 MHz · Crystal or external reference clock · Provided to the USB controller

Уточнить цену

Открыть даташит →

TUSB1310ZAY Характеристики

Product Type USB 3.0 SuperSpeed physical-layer transceiver
Number of Ports 1 transceiver port
Maximum Data Rate 5.0 Gbps
USB Generation USB 3.0
Controller Interface PIPE3 and ULPI
Clock Source Single crystal or external reference clock
Selectable Reference Clock Frequencies 20, 25, 30, and 40 MHz
Clock Output to USB Link-Layer Controller Supported
Package Type 175-NFBGA
Package Dimensions 12 x 12 mm
Ball Count 175 balls
Тип монтажа Surface mount

Руководство по цоколевке TUSB1310ZAY в корпусе 12 x 12 mm

Цоколевка для TUSB1310ZAY (корпус 12 x 12 mm). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.

Схема цоколевки корпуса 12 x 12 mm для TUSB1310ZAY

Нет подробных данных о распиновке для TUSB1310ZAY.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

TUSB1310ZAY подходит для 6 применениеs: USB 3.0 Docking Stations, High-Speed Data Transfer Products, USB Storage Gateways, Embedded USB 3.0 Controllers, USB Test and Measurement Equipment, USB-C to Legacy USB 3.0 Bridges.

🖥️

USB 3.0 Docking Stations

The TUSB1310ZAY fits a single-port SuperSpeed section of a docking station when the design uses a compatible USB link-layer controller with either PIPE3 or ULPI connectivity. Its 5.0-Gbps transceiver rate supports USB 3.0 data paths, while selectable 20, 25, 30, and 40 MHz reference-clock frequencies support multiple controller clock arrangements. Using a dedicated single-port transceiver can simplify the division of labor between a host controller and downstream hub circuitry. The principal engineering constraint is USB 3.0 signal integrity: short differential routes, solid reference planes, and symmetrical connector transitions should follow the manufacturer’s reference layout.

💾

High-Speed Data Transfer Products

A product that moves data between a host and USB 3.0 storage can use the TUSB1310ZAY as the physical-layer element between a USB controller and the external connector. The device’s documented 5.0-Gbps maximum rate and PIPE3 or ULPI interface options make it suitable for controller-based architectures where the link layer and physical layer are separate devices. System-level throughput still depends on the controller, firmware, storage, connector, and cable path. High-speed differential routing should be treated as a controlled-impedance design and checked for loss and crosstalk with the complete board stackup.

🖥️

USB Storage Gateways

The TUSB1310ZAY can provide the SuperSpeed physical connection in a storage gateway or protocol-conversion appliance that separates USB link-layer control from physical signaling. Its one-port, 5.0-Gbps configuration is appropriate for a single upstream or downstream USB 3.0 path, while PIPE3 and ULPI allow the board designer to align the interface with the selected controller. Reference-clock selection is especially important in multi-function gateways because clock architecture affects component count and synchronization. Use the manufacturer data manual to confirm clock jitter, startup, and application-circuit requirements before layout release.

🔧

Embedded USB 3.0 Controllers

The TUSB1310ZAY is appropriate for embedded systems that use a dedicated USB link-layer controller and require a separate 5.0-Gbps SuperSpeed physical layer. PIPE3 offers a parallel controller-oriented connection for systems designed around that interface, while ULPI offers a compact register-oriented option. The transceiver accepts a crystal or external reference clock and documents 20, 25, 30, and 40 MHz choices, allowing the design to follow the controller ecosystem. Because the package is a 175-NFBGA, placement and escape-routing quality are central to achieving reliable high-speed operation.

📺

USB Test and Measurement Equipment

The TUSB1310ZAY can be used in test equipment that requires a controllable USB 3.0 SuperSpeed interface alongside a separate link-layer controller. Its documented 5.0-Gbps rate, selectable reference-clock frequencies, and PIPE3 or ULPI connectivity support laboratory systems that must exercise USB 3.0 physical behavior. The transceiver’s ability to provide a clock to the link-layer controller can simplify clock distribution in a multi-board instrument. Measurement accuracy will depend on test-path losses, connector launch geometry, return loss, and whether the implemented clock meets the controller and transceiver timing requirements.

🔌

USB-C to Legacy USB 3.0 Bridges

The TUSB1310ZAY can support a bridge design in which a USB-C-facing implementation connects to a USB 3.0 controller and physical-layer section. The PIPE3 interface can suit controller arrangements optimized for parallel throughput, while ULPI can suit designs that prioritize a compact register interface. The bridge must coordinate lane orientation, controller behavior, connector configuration, power roles, and protocol translation. The transceiver itself supplies the 5.0-Gbps physical layer rather than handling USB protocol conversion, so a controller and appropriate Type-C port controller or multiplexer remain necessary for the complete bridge function.

What is the TUSB1310ZAY?
The TUSB1310ZAY is a single-port, 5.0-Gbps USB 3.0 SuperSpeed physical-layer transceiver from Texas Instruments. According to the manufacturer product page, it provides both PIPE3 and ULPI interfaces, operates from a single crystal or external reference clock, and is packaged in a 175-NFBGA measuring 12 x 12 mm. It is intended for systems in which a USB link-layer controller connects to a USB 3.0 physical data path.
What are the key specifications of TUSB1310ZAY that engineers should know?
The key TUSB1310ZAY specifications are one USB 3.0 transceiver port, a maximum data rate of 5.0 Gbps, and support for PIPE3 and ULPI controller interfaces. Texas Instruments documents selectable reference-clock frequencies of 20, 25, 30, and 40 MHz and confirms that the transceiver can provide a clock to a USB link-layer controller. The package is 175-NFBGA, 12 x 12 mm. The manufacturer product page and datasheet should be checked for electrical limits and environmental ratings.
Which USB interface standards does TUSB1310ZAY support?
The TUSB1310ZAY supports the USB 3.0 SuperSpeed physical layer at up to 5.0 Gbps and exposes two controller-facing interface options: PIPE3 and ULPI. According to the Texas Instruments TUSB1310 product-page description, the device is a single-port physical-layer transceiver rather than a general-purpose USB link-layer controller. PIPE3 and ULPI are used to connect the transceiver to compatible USB controllers, allowing board-level integration choices to be matched to the selected controller.
Where can I download the TUSB1310ZAY datasheet PDF?
The official TUSB1310 datasheet and supporting documentation are available from the Texas Instruments product page at https://www.ti.com/product/TUSB1310. Use the manufacturer’s TUSB1310 data manual for the authoritative pin descriptions, electrical characteristics, application schematic, reference-clock requirements, layout guidance, and package drawings. Third-party datasheet indexes may reproduce the document, but the TI-hosted page is the preferred source for revision-controlled technical information.
Where can I find the TUSB1310ZAY pinout?
The TUSB1310ZAY pinout is defined by the Texas Instruments TUSB1310 datasheet because the device uses a 175-NFBGA package. The manufacturer’s pin-description table should be used to assign all balls, including power, ground, USB differential signals, clock connections, and controller-interface signals. The available product listing confirms the 175-NFBGA and 12 x 12 mm package, but it does not provide a reliable ball-by-ball assignment suitable for PCB construction.
What clock frequencies can TUSB1310ZAY use?
The TUSB1310ZAY supports selectable reference-clock frequencies of 20, 25, 30, and 40 MHz. According to the Texas Instruments part-details description, the device can operate from either a single crystal or an external reference clock. That flexibility allows the clock architecture to be aligned with the selected USB link-layer controller. Designers should still verify the required frequency, tolerance, startup behavior, and crystal-load configuration in the manufacturer data manual.
Where to buy TUSB1310ZAY online?
Use the Request a Quote form on this page to request the Texas Instruments TUSB1310ZAY with the required quantity, package, and delivery information. The form provides a direct purchasing path without relying on changing third-party stock figures. For technical screening, confirm that the requested device is the 175-NFBGA, 12 x 12 mm USB 3.0 transceiver and review its lifecycle and ordering information on the official Texas Instruments product page.
What is the price of TUSB1310ZAY?
Current TUSB1310ZAY pricing depends on order quantity, supply status, and the exact ordering configuration, so use the Request a Quote form on this page for a current quotation. No static price figure should be used for procurement approval because market conditions and availability can change. Submit the required quantity and target delivery details to obtain a current response tied to the exact 175-NFBGA device.
What is the lead time for TUSB1310ZAY?
The current lead time for TUSB1310ZAY should be confirmed through the Request a Quote form on this page using the required quantity and schedule. Lead time can vary with order volume, production scheduling, and inventory status. Texas Instruments’ TUSB1310 product and part-details pages are the appropriate places to confirm lifecycle status and ordering information, while the quotation request provides a transaction-specific availability response.
Is TUSB1310ZAY in stock?
Request current TUSB1310ZAY availability through the Request a Quote form on this page. Because inventory changes rapidly, a general product-page listing should not be treated as a guaranteed stock commitment. Include the required quantity, date code requirements, shipment destination, and production schedule so the quotation can reflect an actionable supply commitment rather than a general availability indication.
What is the difference between TUSB1310ZAY and TUSB1310AZAY?
Both TUSB1310ZAY and TUSB1310AZAY are listed as Texas Instruments single-port USB 3.0 transceivers in the 175-NFBGA, 12 x 12 mm package. The available distributor record confirms the shared package and USB 3.0 transceiver class, but it does not quantify the electrical, temperature, qualification, or ordering differences between the two orderable codes. Consult the manufacturer ordering table and data manual before treating the alternative as a functional substitute.
When should I choose TUSB1310ZAY over TUSB1310AZAY?
Choose TUSB1310ZAY when the exact manufacturer ordering code is required for an existing PCB, BOM, or production qualification. TUSB1310AZAY offers a same-package alternative that should be reviewed when the required orderable code differs. Because the available listings do not quantify all differences between the two versions, selection should depend on confirmed electrical limits, temperature grade, qualification status, clock configuration, and lifecycle requirements in the Texas Instruments documentation.
Is TUSB1310ZAY suitable for a USB 3.0 docking station?
The TUSB1310ZAY is suitable for a single-port USB 3.0 docking-station function when the architecture requires a dedicated SuperSpeed transceiver and either PIPE3 or ULPI controller connectivity. Its documented 5.0-Gbps rate and selectable 20, 25, 30, or 40 MHz reference clocks support integration with compatible USB link-layer controllers. A multi-port dock may require a multi-port hub controller and companion hub transceivers rather than a single-port device.
What can replace TUSB1310ZAY?
TUSB1310AZAY is the closest confirmed same-package candidate identified for the TUSB1310ZAY because both are Texas Instruments single-port USB 3.0 transceivers in the 175-NFBGA, 12 x 12 mm package. A confirmed drop-in replacement must also match the ball pattern, electrical limits, reference-clock configuration, and application behavior. Use the Request a Quote form to request an engineering review of the exact replacement requirement before changing the released BOM.
Is TUSB1310ZAY the same as TUSB1310ZAYR?
The TUSB1310ZAY and TUSB1310ZAYR identify closely related Texas Instruments ordering variants, but the available comparison data does not establish that every ball-level function and ordering attribute is identical. TUSB1310ZAYR is commonly distinguished by an additional orderable suffix, which can relate to shipping or reel configuration. Use the manufacturer ordering-information table to confirm the exact device, package, reel configuration, and production ordering conditions.
What is the best TI equivalent for TUSB1310ZAY?
TUSB1310AZAY is the best same-package Texas Instruments candidate identified from the available cross-reference results, since it is also listed as a 175-NFBGA, 12 x 12 mm, single-port USB 3.0 transceiver. No independently verified cross-manufacturer drop-in equivalent was identified. A substitution should not be approved solely from package and speed matching; verify pin functions, supply voltage, clocking, I/O characteristics, temperature grade, qualification, and lifecycle using the relevant manufacturer documentation.

Справочные инженерные данные для TUSB1310ZAY — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Select the TUSB1310ZAY when the design requires a single-port, 5.0-Gbps USB 3.0 physical layer, either PIPE3 or ULPI controller connectivity, and support for a 20, 25, 30, or 40 MHz reference clock. Its documented ability to provide a clock to the USB link-layer controller may simplify the system clock architecture. TUSB1310AZAY is the closest identified same-package Texas Instruments alternative when its ordering code matches the production requirements, but electrical, temperature, and qualification differences must be confirmed before substitution. A multi-port dock normally requires a hub controller and additional transceiver channels, while a design needing protocol conversion or USB Type-C port management must add the appropriate controller circuitry. No independently verified cross-manufacturer drop-in equivalent was identified, so a different supplier should not be assumed interchangeable.

Сравнение с аналогами

Параметр Этот товар TUSB1310AZAY
Package 175-NFBGA (12 x 12 mm) 175-NFBGA (12 x 12 mm)
Brand Texas Instruments Texas Instruments
Product Type USB 3.0 SuperSpeed transceiver USB 3.0 SuperSpeed transceiver
Number of Transceiver Ports 1 1

Ключевые отличия

  • Combines two controller interfaces in one transceiver (против TUSB1310AZAY)
  • Supports four documented reference-clock selections (против TUSB1310AZAY)
  • Can supply a clock to the USB link-layer controller (против TUSB1310AZAY)

Заметки по проектированию

Treat the USB 3.0 differential paths as controlled-impedance, length-sensitive interconnects. Follow the Texas Instruments TUSB1310 reference layout for ball escape order, connector and package alignment, via transitions, and return-path continuity. Keep the transceiver, crystal or clock source, and decoupling network close together, and avoid forcing USB traces through plane splits or poorly referenced vias. Full-stackup simulation and signal-integrity validation should include the selected connector launch and enclosure or cable environment.

Do not assume that a matching package and USB data rate prove that an alternative ordering code is a drop-in replacement. Compare every assigned ball, supply rail, signal type, clock input, clock output, control signal, and documented electrical limit against the released schematic. For TUSB1310ZAY and TUSB1310AZAY, the available records establish the same 175-NFBGA package and USB 3.0 transceiver class, but the remaining ordering-code differences require confirmation from the manufacturer documentation before substitution.

Use the power topology, supply rails, and decoupling configuration specified in the manufacturer data manual. Place low-inductance ceramic bypass capacitors immediately at the appropriate power and ground balls, provide the documented bulk capacitance, and keep high-current return paths away from sensitive clock and differential-signal regions. Validate steady-state and transient current against the selected USB operating mode. The exact rail voltage and capacitor values are not stated in the product listing and must not be inferred from generic USB designs.

Select the crystal or external clock according to the supported 20, 25, 30, or 40 MHz reference frequencies, and verify tolerance, jitter, startup time, load capacitance, and drive level against the data manual. Keep the clock path short and isolate it from noisy switching nodes. If the transceiver supplies a clock to the link-layer controller, analyze both devices’ input and output requirements together, including edge rate, return loss, and the possibility of clock-loop or shared-impedance problems.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The manufacturer product page and distributor listings do not explicitly state RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification status for this ordering code. AEC-Q100 is not applicable unless a specifically qualified ordering option is selected.

Данные проверены: 2026-11-10 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

TUSB1310ZAY datasheet TUSB1310ZAY pinout TUSB1310ZAY datasheet pdf TUSB1310ZAY equivalent TUSB1310ZAY replacement TUSB1310ZAY cross reference TUSB1310ZAY footprint TUSB1310ZAY schematic TUSB1310ZAY application circuit Texas Instruments TUSB1310ZAY TUSB1310ZAY 175-NFBGA TUSB1310ZAY price TUSB1310ZAY stock TUSB1310ZAY vs TUSB1310AZAY TUSB1310 5.0-Gbps PIPE3 ULPI

Связанные компоненты & термины

Texas Instruments TUSB1310ZAY TUSB1310AZAY TUSB1310 USB 3.0 SuperSpeed USB USB physical-layer transceiver USB interface IC PIPE3 interface ULPI interface USB link-layer controller 5.0 Gbps 20 MHz reference clock 25 MHz reference clock 30 MHz reference clock 40 MHz reference clock 175-NFBGA 12 x 12 mm package single-port transceiver differential signal integrity surface-mount semiconductor clock output
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ