Microchip Technology

VSC8541XMV-04 Single-Port Gigabit Cu PHY | Microchip

MPN: VSC8541XMV-04 ✓ सक्रिय
68-QFN (8 mm x 8 mm) Package
न्यूनतम ऑर्डर मात्रा: 1 |

VSC8541XMV-04 अवलोकन

The Microchip VSC8541XMV-04 is a single-port, low-power copper Ethernet PHY designed for space-constrained 10/100/1000BASE-T equipment, with support for Energy Efficient Ethernet, Wake-on-LAN, and Synchronous Ethernet. It is packaged in a 68-pin QFN measuring 8 mm by 8 mm and provides GMII, RGMII, MII, and RMII interfaces.

A copper PHY, or physical-layer transceiver, is the circuit that converts logical Ethernet data into signals suitable for transmission over twisted-pair cabling. Within the network hierarchy, the VSC8541XMV-04 is an Ethernet interface IC that connects a digital network processor, switch, router, or other host controller to a 10/100/1000BASE-T copper network. Its multiple interface options allow it to address systems with different clocking, data-width, and board-layout requirements.

The device combines Gigabit-class network connectivity with low-power operation and a compact 68-QFN package. Energy Efficient Ethernet can reduce link power when the traffic load permits it, while Wake-on-LAN supports remotely waking compatible networked equipment. Synchronous Ethernet provides a mechanism for transferring timing information over Ethernet links, making the PHY relevant to infrastructure equipment that requires synchronization.

The available GMII, RGMII, MII, and RMII interfaces are important selection criteria because they determine how the PHY connects to the host controller. GMII and RGMII support parallel Ethernet signaling, while MII and RMII are commonly associated with lower-speed or lower-pin-count implementations. The exact clocking, voltage, timing, and pin-level requirements should be verified against the manufacturer datasheet and hardware design checklist before layout is released.

Typical uses include industrial Ethernet gateways, compact network switches, routers, telecommunications access equipment, set-top hardware, and embedded systems that require a single copper Ethernet port. Its 8 mm by 8 mm footprint saves board area compared with larger multi-port PHYs, while EEE and WoL features can improve power management and remote-access behavior.

PCB implementation requires careful attention to high-speed digital routing, clock integrity, copper media interface layout, and power and ground distribution. Follow the VSC8541 Hardware Design Checklist for recommended component placement, magnetics-interface geometry, decoupling, and signal-integrity practices. Confirm the selected transformer, line-side filtering, and board stack-up against the applicable channel requirements.

This product page combines the manufacturer feature description, package information, ordering-code comparisons, and practical implementation guidance. It also organizes same-family drop-in candidates and identifies which parameters still require confirmation from the individual device datasheet, helping engineers narrow a hardware revision or sourcing decision before completing a first-pass design.

के लिए ड्रॉप-इन विकल्प VSC8541XMV-04 — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं VSC8541XMV-04 (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Energy Efficient Ethernet, Package, Product Type, Synchronous Ethernet, Package Dimensions.

Microchip Technology
Energy Efficient Ethernet: IEEE 802.3az (EEE) supported
Package: 48-pin QFN (6x6 mm)
Product Type: Single-port Gigabit Ethernet Copper PHY
इसके साथ तुलना करें VSC8541XMV-04 →
Microchip Technology
Energy Efficient Ethernet: IEEE 802.3az supported
Product Type: Single-port copper Ethernet PHY
Synchronous Ethernet: SyncE supported
इसके साथ तुलना करें VSC8541XMV-04 →
Microchip Technology
Product Type: Single-port Gigabit Ethernet copper PHY
Package Dimensions: 8 x 8 mm
इसके साथ तुलना करें VSC8541XMV-04 →
Microchip Technology
Energy Efficient Ethernet: EEE supported
Package: 68-QFN (8 x 8 mm)
Product Type: Single-port Gigabit Ethernet copper PHY
इसके साथ तुलना करें VSC8541XMV-04 →
Microchip Technology
Product Type: Single-port Gigabit Ethernet copper PHY
Package Dimensions: 8 mm x 8 mm
इसके साथ तुलना करें VSC8541XMV-04 →

VSC8541XMV-01

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
Microchip Technology
📦 68-QFN (8x8)
Single-port Gigabit Ethernet copper PHY · 10/100/1000BASE-T · 1 port · GMII/RGMII/MII/RMII · EEE supported · Supported · SyncE supported · Integrated

कीमत के लिए संपर्क करें

डेटाशीट देखें →

VSC8541XMV-02

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
📦 68-QFN (8x8)
Ordering suffix changes from -04 to -02; detailed electrical delta is 0% confirmed, so the individual -02 datasheet must be checked before substitution.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

VSC8541XMV-05

✅ ड्रॉप-इन
📦 68-QFN (8x8)
Ordering suffix changes from -04 to -05; the same 68-QFN family format is retained, while device-specific electrical differences require manufacturer confirmation.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

VSC8541XMV

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
Microchip Technology
📦 68-QFN (8x8)
Single-port Gigabit Ethernet copper PHY · 10/100/1000BASE-T · 1 port · Copper twisted pair · GMII, RGMII, MII, and RMII · Supported · Supported · Supported

कीमत के लिए संपर्क करें

डेटाशीट देखें →

VSC8541XMV-04 विशेषताएं

Device Type Single-port copper Ethernet PHY
Supported Ethernet Rates 10/100/1000BASE-T
Port Count 1 copper port
Host Interface GMII, RGMII, MII, and RMII
Energy Efficient Ethernet Supported
Wake-on-LAN Supported
Synchronous Ethernet Supported
पैकेज 68-QFN (8 mm x 8 mm)
पिन काउंट 68 pins
माउंटिंग प्रकार Surface mount
Maximum Link Rate 1000 Mb/s
Media Interface Copper twisted-pair Ethernet

VSC8541XMV-04 68-qfn (8 mm x 8 mm) पिन कॉन्फ़िगरेशन गाइड

VSC8541XMV-04 (68-qfn (8 mm x 8 mm) पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।

VSC8541XMV-04 के लिए 68-qfn (8 mm x 8 mm) पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: VSC8541XMV-04.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

VSC8541XMV-04 के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Ethernet Gateway, Compact Network Switch, Telecommunications Access Equipment, Networked Security Camera, Robotics and Automation Controller, Set-Top and Connected Media Device.

🏭

Industrial Ethernet Gateway

The VSC8541XMV-04 fits a compact industrial gateway that connects an embedded controller to a 10/100/1000BASE-T network. Its single copper-port architecture reduces board area compared with a multi-port PHY, while the 8 mm by 8 mm 68-QFN package supports dense equipment layouts. EEE can reduce link power when traffic is intermittent, and WoL supports remote maintenance. The design should use MII, RMII, RGMII, or GMII according to the host controller and must follow the manufacturer layout checklist for the magnetics interface and high-speed traces.

🌐

Compact Network Switch

The VSC8541XMV-04 can provide the copper-facing physical layer for a compact switch port in access equipment or an embedded network appliance. Support for 1000BASE-T allows the port to negotiate Gigabit operation over twisted-pair cabling, while GMII and RGMII offer parallel paths to a suitable switching fabric. The 68-QFN footprint leaves routing area for the network transformer and line-side components. EEE is useful in fanless equipment where link power can be reduced during low-traffic periods, subject to host and network configuration.

🌐

Telecommunications Access Equipment

The VSC8541XMV-04 is applicable to compact telecommunications equipment requiring one 10/100/1000BASE-T service port. Synchronous Ethernet support is particularly relevant to infrastructure designs that transfer timing over the Ethernet link, while Wake-on-LAN can assist remote maintenance of installed equipment. The 8 mm by 8 mm 68-QFN package supports space-constrained line cards, but synchronization mode, recovered clock architecture, line impedance, and isolation requirements must be confirmed in the device documentation and channel design.

🎥

Networked Security Camera

The VSC8541XMV-04 can serve as the copper Ethernet physical layer in a compact camera or surveillance endpoint. A single 10/100/1000BASE-T port supports common network architectures, and Energy Efficient Ethernet can reduce link energy consumption when the camera traffic stream is relatively static. Wake-on-LAN may support remote restart or maintenance functions when supported by the host stack. The camera design should pair the PHY with the approved magnetic network interface, observe high-speed trace-length constraints, and validate the complete link with the intended network transformer.

🤖

Robotics and Automation Controller

The VSC8541XMV-04 is suitable for a robot or industrial controller that needs a wired Ethernet link for configuration, telemetry, and process integration. The low-power, small-form-factor design aligns with embedded control boards where board area and standby consumption are constrained. The controller can use RMII or RGMII for a practical host connection and negotiate 10, 100, or 1000 Mb/s copper operation. Robust layout must separate the high-speed digital host interface from the line-side transformer network and provide the decoupling and return paths specified by the hardware design checklist.

📺

Set-Top and Connected Media Device

The VSC8541XMV-04 fits a set-top box or connected media appliance requiring a single wired Gigabit Ethernet connection. Its compact 68-QFN package preserves board area for storage, video processing, and power systems, while EEE supports lower link power in a continuously connected product. RMII or RGMII provides integration options for embedded hosts with different clock and lane arrangements. The implementation should use the manufacturer’s approved magnetics and filtering approach, verify link startup behavior, and complete electromagnetic and conducted-emissions testing for the finished enclosure and cable configuration.

What is the VSC8541XMV-04?
The VSC8541XMV-04 is a single-port, low-power copper Ethernet PHY for 10/100/1000BASE-T applications. According to the Microchip VSC8541 product page, it supports Energy Efficient Ethernet, Wake-on-LAN, and Synchronous Ethernet. The device accepts GMII, RGMII, MII, or RMII host-side traffic and is housed in a 68-QFN package measuring 8 mm by 8 mm.
Where can I download the VSC8541XMV-04 datasheet?
The VSC8541XMV-04 technical information is available through the official Microchip VSC8541 product page and the linked manufacturer documentation. The product page identifies the device as a low-power single-port copper PHY for 10/100/1000BASE-T networks. For layout and first-pass design requirements, also consult the VSC8541 Hardware Design Checklist PDF published by Microchip.
What package does the VSC8541XMV-04 use?
The VSC8541XMV-04 uses a 68-pin QFN package measuring 8 mm by 8 mm. The distributor listing identifies the package as 68-QFN (8x8), confirming that it is a surface-mount land pattern rather than a leaded package. Use the package drawing and pin-description table in the manufacturer documentation before assigning PCB tracks and exposed-pad connections.
Which Ethernet interfaces are supported by the VSC8541XMV-04?
The VSC8541XMV-04 supports GMII, RGMII, MII, and RMII host interfaces. This range allows the PHY to connect with controllers using parallel data paths and different clocking arrangements. The interface configuration still depends on the device variant and operating mode, so verify the exact mode, voltage, and timing requirements in the individual manufacturer datasheet.
Does the VSC8541XMV-04 support Gigabit Ethernet?
Yes, the VSC8541XMV-04 supports 10/100/1000BASE-T operation on one copper port. According to the Microchip product page, it is intended for space-constrained 10, 100, and 1000 Mb/s Ethernet applications. A complete link also requires a compatible magnetic interface or transformer arrangement, PCB routing, and the appropriate Ethernet channel implementation.
Does the VSC8541XMV-04 support Energy Efficient Ethernet and Wake-on-LAN?
Yes, the VSC8541XMV-04 includes Energy Efficient Ethernet and Wake-on-LAN support. Energy Efficient Ethernet allows a compatible link to reduce power consumption when traffic conditions permit, while Wake-on-LAN enables remote activation of compatible equipment. Synchronous Ethernet is also listed as a supported feature for timing-sensitive network infrastructure.
Where can I buy the VSC8541XMV-04?
The VSC8541XMV-04 can be requested through the Request a Quote form on this page for current commercial availability, unit pricing, and lead-time confirmation. The manufacturer identifies the VSC8541 family for active network-product design, and current distributor listings identify this exact ordering code. Submit the required quantity and target date through the on-page form.
What is the price of the VSC8541XMV-04?
Current commercial pricing for the VSC8541XMV-04 is obtained through the Request a Quote form on this page. The form allows buyers to specify quantity, shipment destination, and procurement schedule so the quote reflects current supply conditions. Because the component is a specialized single-port Gigabit copper PHY, request a quantity-based quotation rather than relying on an outdated historical catalog amount.
What is the lead time for the VSC8541XMV-04?
The current lead time for the VSC8541XMV-04 should be confirmed through the Request a Quote form on this page. Provide the required quantity, delivery location, and target production date so the procurement response can reflect actual allocation and logistics. The family is intended for current 10/100/1000BASE-T product designs, but a quotation remains the appropriate source for schedule-specific commitments.
Is the VSC8541XMV-04 in stock?
Current VSC8541XMV-04 stock should be confirmed through the Request a Quote form on this page. Enter the required quantity and destination to obtain an availability response based on current supply. This order-focused approach avoids treating a distributor landing-page indication as a guaranteed inventory reservation or a firm delivery commitment.
What is the difference between VSC8541XMV-04 and VSC8541XMV-05?
Both VSC8541XMV-04 and VSC8541XMV-05 belong to the VSC8541 single-port copper-PHY family and are listed in the 68-QFN (8x8) format. Their ordering-code suffixes indicate distinct device variants, but the available comparison does not establish every electrical difference. Review the exact -04 and -05 device tables before substituting them in a released PCB or production BOM.
When should I choose VSC8541XMV-04 over VSC8541XMV-05?
Choose VSC8541XMV-04 when that exact ordering code is specified by the system requirements, PCB qualification, or released design. VSC8541XMV-05 is a closely related member of the same 68-QFN family and may serve as an alternative sourcing candidate, but suffix changes can correspond to revised silicon, qualification, or documentation. Confirm device-specific limits and configuration before final selection.
Can VSC8541XMV-05 replace the VSC8541XMV-04?
VSC8541XMV-05 can be evaluated as a same-family replacement because it is identified as a 68-QFN VSC8541 variant. However, confirming a true drop-in replacement requires the manufacturer to verify pin functions, operating modes, electrical limits, and device-specific changes for the exact suffix pair. Treat it as a qualified alternative only after that comparison and any required board testing are complete.
What can replace the VSC8541XMV-04?
The closest evaluated replacements are same-brand orderable variants such as VSC8541XMV-01, VSC8541XMV-02, and VSC8541XMV-05, all associated with the VSC8541 family. Their suitability depends on matching the 68-QFN footprint, interface configuration, electrical limits, firmware or register expectations, and qualification. Use the manufacturer ordering information and device datasheets to approve a specific drop-in source.
What are the key specifications of the VSC8541XMV-04 that engineers should know?
The principal documented specifications are a single copper port, support for 10/100/1000BASE-T, four host-interface choices—GMII, RGMII, MII, and RMII—and a 68-QFN package measuring 8 mm by 8 mm. Energy Efficient Ethernet, Wake-on-LAN, and Synchronous Ethernet are also supported. Supply voltage, temperature range, power consumption, and detailed timing limits should be selected from the individual device datasheet.

के लिए इंजीनियरिंग संदर्भ डेटा VSC8541XMV-04 — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the VSC8541XMV-04 when the design needs a single 10/100/1000BASE-T copper port and the released hardware is specifically qualified for the -04 ordering code. Its 68-QFN 8 mm by 8 mm package suits compact equipment, while documented EEE, WoL, SyncE, GMII, RGMII, MII, and RMII support covers several infrastructure and embedded use cases. Consider VSC8541XMV-05 when procurement needs an alternate orderable variant, but confirm device-specific differences before using it on an existing PCB. VSC8541XMV-01 and VSC8541XMV-02 are additional same-family candidates for engineering evaluation. KSZ8041, KSZ8081, and LAN-series devices can be considered when their electrical, protocol, pinout, and lifecycle requirements are independently verified; they are not presented as confirmed drop-in replacements for this exact Microchip ordering code.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद VSC8541XMV-01 VSC8541XMV-02 VSC8541XMV-05 VSC8541XMV
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 68-QFN (8x8) 68-QFN (8x8) 68-QFN (8x8) 68-QFN (8x8) 68-QFN (8x8)
Port Count 1 copper port 1 copper port 1 copper port 1 copper port 1 copper port
Supported Ethernet Rates 10/100/1000BASE-T 10/100/1000BASE-T 10/100/1000BASE-T 10/100/1000BASE-T 10/100/1000BASE-T
Ordering Suffix -04 -01 -02 -05 Base ordering code

मुख्य विशेषताएँ

  • Combines Gigabit copper connectivity with compact integration (बनामKSZ8041TLI-TR)
  • Multiple host-interface choices in one PHY family (बनामKSZ8081RNACA)
  • Synchronization and remote-management features (बनामKSZ8041MLL-TR)

डिज़ाइन नोट्स

Follow the VSC8541 Hardware Design Checklist for the copper media interface, magnetics, filtering, decoupling, and component-placement scheme. Keep the host-side clocks and parallel data routes short and continuous, provide a low-impedance return path beneath each high-speed interface, and keep the line-side network physically separated from sensitive logic. Treat the checklist as a starting point, then validate the final stack-up and channel with simulation and hardware testing.

Confirm the exposed-pad, thermal, and pin-1 details from the package drawing before releasing artwork. The 68-QFN land pattern must match the manufacturer’s recommended footprint, and the exposed center pad should use the specified via and solder pattern. Also verify whether a particular ordering code or board revision changes any interface assignment; the family suffix alone is not sufficient evidence for a blind footprint reuse.

Maintain the timing and impedance constraints of the selected GMII, RGMII, MII, or RMII interface, including clock-to-data relationships and trace-length matching. Because these interfaces use parallel signals, route them as a coherent group over a continuous reference plane and avoid stubs or unnecessary test pads. Validate rise time, fall time, jitter, crosstalk, and channel margin on the final PCB rather than relying on nominal interface naming.

Do not substitute a different VSC8541 ordering suffix solely because the package name matches. Compare the exact device datasheet for interface enablement, register behavior, silicon revision, electrical limits, qualification, and documented changes. Similarly, do not assume that Wake-on-LAN, EEE, or Synchronous Ethernet are automatically available in every operating mode; confirm the required software, clocks, magnetics, and system configuration.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The manufacturer feature description and exact-part distributor listings do not provide explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations for VSC8541XMV-04. Confirm these statements against the current manufacturer product documentation and the applicable quality document.

डेटा सत्यापन तिथि: 2026-11-16 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

vsc8541xmv 05 datasheet vsc8541xmv qfn 68 vsc8541xmv 02 datasheet VSC8541XMV-04 datasheet VSC8541XMV-04 datasheet pdf VSC8541XMV-04 pinout VSC8541XMV-04 footprint VSC8541XMV-04 equivalent VSC8541XMV-04 replacement VSC8541XMV-04 price VSC8541XMV-04 stock Microchip VSC8541XMV-04 VSC8541XMV-04 vs VSC8541XMV-05 VSC8541XMV-04 68-QFN

संबंधित कंपोनेंट्स और शब्द

Microchip Technology VSC8541XMV-04 VSC8541XMV-01 VSC8541XMV-02 VSC8541XMV-05 VSC8541XMV Ethernet PHY copper PHY physical-layer transceiver Ethernet interface IC 10/100/1000BASE-T Gigabit Ethernet GMII RGMII MII RMII Energy Efficient Ethernet Wake-on-LAN Synchronous Ethernet 68-QFN QFN package surface-mount package semiconductor industrial Ethernet network interface
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें