AMD

XC7A100T-L1FTG256I - 28nm Artix-7 FPGA, 256-BGA | AMD

MPN: XC7A100T-L1FTG256I ✓ सक्रिय
FTG256, 256-terminal BGA Package L1 Speed
न्यूनतम ऑर्डर मात्रा: 1 |

XC7A100T-L1FTG256I अवलोकन

The AMD XC7A100T-L1FTG256I is an Artix-7 FPGA built on a 28 nm process and supplied in a 256-terminal FTG256 ball-grid-array package. The device provides programmable logic, block RAM, and digital signal-processing resources for compact, low-power embedded systems. The L1 speed designation identifies the lower-cost performance grade in the Artix-7 family, while the I suffix denotes the industrial temperature option. The manufacturer documentation identifies an operating range from -40°C to 100°C for this ordering code.

An FPGA is a reconfigurable digital semiconductor whose programmable lookup tables, routing fabric, memory blocks, and DSP resources implement custom logic in parallel. Within the product hierarchy, the XC7A100T belongs to the Artix-7 family of FPGAs and combines general programmable logic with high-speed serial connectivity and embedded memory. Its architecture allows the same PCB to support multiple firmware or bitstream configurations, shortening development cycles for industrial control, communications, instrumentation, and embedded processing systems.

The Artix-7 family is positioned for low power consumption and cost-sensitive programmable logic. The XC7A100T designation identifies the 100T device density, with the exact logic-cell count, block-RAM capacity, DSP resources, I/O count, speed grade, temperature grade, and package dimensions recorded in the Artix-7 data sheet and product-selection tables. Configuration is performed through the device's dedicated configuration mechanism, and the FTG256 package supports the compact board-space requirements of embedded equipment.

Compared with a fixed-function application-specific integrated circuit, the FPGA provides programmable hardware parallelism, field update capability, and protection against late specification changes. The 28 nm Artix-7 architecture is useful when a design must combine control logic, high-speed interfaces, protocol conversion, or moderate parallel processing without committing to a custom ASIC. The same family also supports migration concepts between device densities, although every migration must be checked against package pinout, power, configuration, and timing constraints.

Typical applications include industrial automation, factory monitoring, data acquisition, network-interface control, embedded vision, test equipment, and compact communications systems. In each case, the FPGA handles parallel transactions and protocol-specific logic while external processors, memories, transceivers, and power regulators support the complete system. AMD's Artix-7 product page identifies the family's focus on low power, low cost, performance per watt, AMS integration, and high-speed transceiver line rates.

A practical design decision is to begin with the FTG256 footprint and speed-grade requirements rather than selecting only by FPGA density. Validate the complete ordering code, exposed-pad connection, decoupling network, configuration interface, memory interface constraints, and bank voltage requirements in the manufacturer data sheet before layout release. This page combines the available manufacturer, distributor, and package resources with application guidance and a package-focused comparison framework for engineering review.

के लिए ड्रॉप-इन विकल्प XC7A100T-L1FTG256I — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं XC7A100T-L1FTG256I (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package, Temperature Grade, Mounting Type, Logic Cells, Device Type.

AMD
Package: 256-ball FTBGA (FTG256)
Temperature Grade: Commercial (C): 0 C to +85 C
Mounting Type: Surface Mount (BGA)
इसके साथ तुलना करें XC7A100T-L1FTG256I →
AMD
Package: 256-ball FT BGA
Mounting Type: Surface mount
Logic Cells: 101,440 cells
इसके साथ तुलना करें XC7A100T-L1FTG256I →
AMD
Package: 256-pin FTG256 package
Temperature Grade: Commercial, 0°C to +85°C
Mounting Type: Surface Mount
इसके साथ तुलना करें XC7A100T-L1FTG256I →
AMD
Package: FTBGA-256
Temperature Grade: Industrial, -40°C to +100°C
Mounting Type: Surface mount
इसके साथ तुलना करें XC7A100T-L1FTG256I →
AMD
Package: 256-ball TFBGA (FTG256)
Temperature Grade: Extended commercial (E)
Mounting Type: Surface mount
इसके साथ तुलना करें XC7A100T-L1FTG256I →

XC7A100T-1FTG256I

✅ ड्रॉप-इन
AMD
📦 FTG256 (256-BGA)
Artix-7 · 101,440 cells · 240 slices · 4,860 Kb · 8 GTP transceivers · 170 I/O · 28 nm · 1 V

कीमत के लिए संपर्क करें

डेटाशीट देखें →

XC7A100T-1FTG256C

✅ ड्रॉप-इन
AMD
📦 FTG256 (256-BGA)
Artix-7 · 101,440 · 4,976,640 · 4,860 · 240 · -1 · Commercial (C): 0 C to +85 C · 256-ball FTBGA (FTG256)

कीमत के लिए संपर्क करें

डेटाशीट देखें →

XC7A100T-2FTG256I

✅ ड्रॉप-इन
AMD
📦 FTG256 (256-BGA)
Artix-7 field-programmable gate array (FPGA) · 101,440 cells · 170 pins · 628 slices · 4,976,640 bits · 28 nm · FTBGA-256 · -2

कीमत के लिए संपर्क करें

डेटाशीट देखें →

XC7A100T-2FTG256C

✅ ड्रॉप-इन
AMD
📦 FTG256 (256-BGA)
Artix-7 Field-Programmable Gate Array (FPGA) · 101,440 logic cells · 170 I/O · 240 DSP48E1 slices · 256-pin FTG256 package · FTBGA-256 / 256-LBGA · 17 mm x 17 mm · 28 nm

कीमत के लिए संपर्क करें

डेटाशीट देखें →

XC7A100T-3FTG256E

✅ ड्रॉप-इन
AMD
📦 FTG256 (256-BGA)
Artix-7 Field Programmable Gate Array (FPGA) · 101,440 cells · 170 I/Os · 28 nm · -3 · 256-ball TFBGA (FTG256) · LBGA · Surface mount

कीमत के लिए संपर्क करें

डेटाशीट देखें →

XC7A100T-L1FTG256I Maximum Ratings और Electrical Characteristics

Device Type Artix-7 field-programmable gate array
FPGA Family Artix-7
Device Designation XC7A100T
Process Technology 28 nm
पैकेज FTG256, 256-terminal BGA
Number of Terminals 256 terminals
I/O Count 170 I/O
Minimum Operating Temperature -40 °C
Maximum Operating Temperature 100 °C
Temperature Grade Industrial
Speed Grade L1
Programmable Logic Type FPGA
Architecture Artix-7 programmable logic architecture
माउंटिंग प्रकार Surface-mount ball-grid array

XC7A100T-L1FTG256I ftg256, 256-terminal bga पिन कॉन्फ़िगरेशन गाइड

XC7A100T-L1FTG256I (ftg256, 256-terminal bga पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।

XC7A100T-L1FTG256I के लिए ftg256, 256-terminal bga पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: XC7A100T-L1FTG256I.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

XC7A100T-L1FTG256I के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Automation Controller, Data Acquisition System, Communications Gateway, Test and Measurement Instrument, Embedded Vision Preprocessor, Power and Energy Management.

🏭

Industrial Automation Controller

The XC7A100T-L1FTG256I fits compact industrial controllers that coordinate sensors, actuators, interlocks, and machine-state logic in parallel. Its Artix-7 architecture allows protocol-specific interfaces and control sequences to be combined in one FPGA, reducing the number of discrete logic devices. The -40°C to 100°C industrial temperature range supports equipment deployed in controlled factory environments. Engineers should use the FTG256 pinout files for differential I/O and power placement, then validate timing and I/O voltage choices against the completed design.

🖥️

Data Acquisition System

The XC7A100T-L1FTG256I is well suited to data-acquisition front ends requiring simultaneous sampling control, digital filtering, buffering, and interface management. Its programmable fabric can implement multiple acquisition channels and format conversion in parallel while the FTG256 package limits board footprint. The L1 grade should be selected only after static timing analysis confirms timing closure for the target clock rates and I/O paths. Power estimation must use the actual utilization and switching activity rather than a generic device-level figure.

🌐

Communications Gateway

The XC7A100T-L1FTG256I can implement communication gateways that combine interface conversion, packet handling, buffering, and control functions in a single programmable device. Parallel FPGA resources allow multiple data paths to operate concurrently, while the 28 nm Artix-7 family is positioned for low-power and low-cost implementations. Package escape routing, differential-pair impedance, clock jitter, and transceiver supply requirements must be reviewed before layout. A grade-2 XC7A100T FTG256 option may be preferable when the L1 timing margin is insufficient.

🔧

Test and Measurement Instrument

The XC7A100T-L1FTG256I is appropriate for programmable test equipment where sequencing, pattern generation, capture, and data reduction require flexible parallel logic. Its configurable architecture lets engineering teams revise measurement algorithms without changing the PCB, while the industrial temperature range supports controlled laboratory and service environments. The FTG256 implementation must include thermal-via and exposed-pad treatment appropriate to the selected power budget. Timing closure should be checked across voltage and temperature corners before hardware release.

📺

Embedded Vision Preprocessor

The XC7A100T-L1FTG256I can implement an embedded-vision preprocessor for pixel transport, thresholding, line detection, color conversion, and frame timing before data reaches an external processor. Parallel operations map naturally to FPGA logic and can reduce host processing latency. The FTG256 package supports compact camera and display modules, but high-speed interfaces require careful bank planning, trace matching, and clocking. Use the official package files to assign pins and verify that all selected I/O standards meet the board's signal-integrity limits.

⚡

Power and Energy Management

The XC7A100T-L1FTG256I is suitable for programmable energy-control systems that monitor power-conversion stages, coordinate switching sequences, and perform fast control calculations. The FPGA's parallel logic can execute multiple control loops and fault-handling paths with deterministic timing. The L1 industrial device supports operation across a -40°C to 100°C range, but power-system safety, isolation, and surge requirements require separate qualification. Decoupling, supply sequencing, exposed-pad grounding, and thermal design should follow the Artix-7 power and package guidance.

What is the AMD XC7A100T-L1FTG256I?
The AMD XC7A100T-L1FTG256I is a 28 nm Artix-7 FPGA in a 256-terminal FTG256 ball-grid-array package. It combines programmable logic, embedded memory, DSP resources, and high-speed I/O for low-power embedded and industrial designs. The XC7A100T denotes the device density, L1 identifies the performance grade, and the I suffix denotes the industrial temperature option.
Where can I download the XC7A100T-L1FTG256I datasheet?
The XC7A100T-L1FTG256I datasheet can be obtained from AMD's Artix-7 product page or the linked Artix-7 data sheet. The device documentation covers architecture, DC and AC switching characteristics, packaging, pinout, and configuration information. Use the complete ordering code and the matching FTG256 package files when assigning PCB pins and power rails.
Where can I find the XC7A100T-L1FTG256I pinout?
The XC7A100T-L1FTG256I pinout is published through AMD's Artix-7 package device pinout files, which provide package information in TXT and CSV formats. Select the XC7A100T device and FTG256 package before assigning signals. The package contains 256 terminals, and the exposed-pad and power configuration must be implemented according to the package files and data sheet.
What is the operating temperature range of XC7A100T-L1FTG256I?
The XC7A100T-L1FTG256I is specified for industrial operation from -40°C to 100°C. This temperature range is stated for the L1FTG256I ordering code in the product documentation. Designers should still verify module temperature, airflow, board construction, and adjacent heat sources because the package temperature depends on the complete assembly.
What package does XC7A100T-L1FTG256I use?
The XC7A100T-L1FTG256I uses the FTG256 package, a 256-terminal ball-grid-array package. The family documentation identifies the target as a 256-terminal field-programmable gate array. Pin assignments, differential-pair routing, supply connections, and the exposed thermal pad must match the official FTG256 package files before PCB sign-off.
What can replace the XC7A100T-L1FTG256I on the same PCB?
The closest same-package choices are XC7A100T-1FTG256I, XC7A100T-1FTG256C, XC7A100T-2FTG256I, XC7A100T-2FTG256C, and XC7A100T-3FTG256E, all of which use the FTG256 footprint. A replacement still requires verification of the speed grade, temperature range, power characteristics, configuration interface, timing constraints, and any design-tool or bitstream implications.
Is XC7A100T-1FTG256I the same as XC7A100T-L1FTG256I?
The XC7A100T-1FTG256I and XC7A100T-L1FTG256I are not identical ordering codes even though both use the XC7A100T device and FTG256 package. The 1 ordering code denotes a different speed designation from L1, so timing, power, qualification, and lifecycle details must be compared before substitution. Pin compatibility alone does not establish equivalent timing performance.
When should I choose XC7A100T-L1FTG256I over a faster XC7A100T grade?
Choose XC7A100T-L1FTG256I when its L1 timing and industrial temperature rating satisfy the design while a lower-cost performance grade is appropriate. Choose a faster XC7A100T FTG256 option when the timing budget cannot be met at L1 or when additional performance margin is required. Validate the final choice with static timing analysis under the actual voltage, temperature, and corner conditions.
Is XC7A100T-L1FTG256I suitable for industrial automation?
The XC7A100T-L1FTG256I is suitable for industrial automation applications that fall within its -40°C to 100°C operating range and fit its FTG256 footprint. Its programmable parallel logic is useful for motion sequencing, machine interlocks, data acquisition, and communications gateways. Confirm electromagnetic, environmental, and functional-safety requirements separately because those qualifications are not established by the MPN alone.
What is the difference between XC7A100T-L1FTG256I and XC7A100T-2FTG256I?
Both devices use the XC7A100T density and FTG256 package, but their speed designations differ: L1 versus grade 2. The higher speed grade generally provides better timing performance and may have different power characteristics. The deciding factor is whether the L1 device meets the design's setup and hold timing at every implemented corner; otherwise, grade 2 offers additional timing margin.
What is the best AMD equivalent for XC7A100T-L1FTG256I?
The best same-footprint AMD alternatives include XC7A100T-1FTG256I and XC7A100T-2FTG256I because they retain the XC7A100T device and FTG256 package while changing the speed or temperature suffix. Choose the ordering code that meets the required performance grade and temperature range, then verify pinout, configuration, timing, and power before approving the substitution.
How is XC7A100T-L1FTG256I programmed or configured?
The XC7A100T-L1FTG256I is configured through its dedicated FPGA configuration interface, while programmable logic is developed with AMD/Xilinx design software and synthesized into a bitstream. The precise configuration modes, voltage requirements, startup behavior, and supported cable or interface details should be taken from the Artix-7 configuration documentation. Do not infer those requirements from the distributor listings.
How much power does XC7A100T-L1FTG256I consume?
XC7A100T-L1FTG256I power consumption depends on the selected I/O standards, clocking, resource utilization, logic activity, and core voltage. Use the DC and AC switching-characteristics data for static and configuration limits, and use the power estimator for project-specific utilization. A single fixed power value is not meaningful before the design's clocks, I/O activity, and termination are defined.
Where can I buy XC7A100T-L1FTG256I and what is the lead time?
Use the Request a Quote form on this page to request XC7A100T-L1FTG256I availability, unit pricing, minimum order quantity, and current lead time. Include the exact ordering code, quantity, required delivery date, and destination. Factory lead time and stock status can vary with the requested configuration and date, so they should be confirmed at quotation.
What is the price of XC7A100T-L1FTG256I?
The current XC7A100T-L1FTG256I price is established through the Request a Quote form on this page. The form should be completed with the exact ordering code, quantity, destination, and required delivery date. A written quotation provides the applicable unit price and confirms whether the part is available for the requested schedule.
Is XC7A100T-L1FTG256I in stock?
Current XC7A100T-L1FTG256I stock should be confirmed through the Request a Quote form on this page. Because the quantity-break listing does not establish availability for this exact suffix and package code, the form is the appropriate route for confirming stock, allocation, and delivery timing. Include the required quantity and target date in the request.

के लिए इंजीनियरिंग संदर्भ डेटा XC7A100T-L1FTG256I — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose XC7A100T-L1FTG256I when the design targets the L1 performance grade, requires the industrial temperature option, and uses the FTG256 footprint. Select XC7A100T-2FTG256I when timing analysis shows that L1 lacks sufficient margin but industrial operation remains required. Use XC7A100T-1FTG256I when the specific grade-1 timing target and industrial requirements are acceptable. Choose commercial-suffix variants only when the product's environmental exposure remains within the commercial specification. XC7A100T-3FTG256E is appropriate when the extended temperature suffix and grade-3 timing are required. In every case, confirm that all candidates share the XC7A100T FTG256 pinout, review configuration and power requirements, rerun timing analysis, and validate the final ordering code before production release.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद XC7A100T-1FTG256I XC7A100T-1FTG256C XC7A100T-2FTG256I XC7A100T-2FTG256C XC7A100T-3FTG256E
Package FTG256 (256-BGA) FTG256 (256-BGA) FTG256 (256-BGA) FTG256 (256-BGA) FTG256 (256-BGA) FTG256 (256-BGA)
Brand AMD AMD AMD AMD AMD AMD
FPGA Family Artix-7 Artix-7 Artix-7 Artix-7 Artix-7 Artix-7
Device Density XC7A100T XC7A100T XC7A100T XC7A100T XC7A100T XC7A100T
Speed Designation L1 1 1 2 2 3
Temperature Grade Industrial, -40°C to 100°C Industrial Commercial Industrial Commercial Extended
Process Technology 28 nm 28 nm 28 nm 28 nm 28 nm 28 nm
Programmable Logic Type FPGA FPGA FPGA FPGA FPGA FPGA
I/O Count 170 I/O 170 I/O 170 I/O 170 I/O 170 I/O 170 I/O

मुख्य विशेषताएँ

  • Same-family speed grade aligned with the target L1 design (बनामXC7A100T-2FTG256I)
  • Industrial temperature ordering for controlled factory environments (बनामXC7A100T-2FTG256C)
  • Compact 256-terminal package with 170 I/O (बनामXC7A100T-1FTG256C)
  • Low-power 28 nm Artix-7 platform for programmable parallel logic (बनामXC7A100T-3FTG256E)

डिज़ाइन नोट्स

Use the Artix-7 power-planning guidance to separate core and I/O supply requirements, specify the required sequencing, and connect the FTG256 exposed pad to the appropriate ground plane. Estimated: regulator efficiency and total current cannot be calculated without the design's core voltage, I/O voltage, utilization, clock rate, and switching activity. Validate those values with the AMD power estimator before selecting regulators and magnetics.

Assign every ball from the official XC7A100T FTG256 package file and preserve the recommended ball assignment for configuration, clocks, and high-speed interfaces. Place decoupling capacitance at the associated power balls, keep high-speed return paths continuous, and provide thermal vias beneath the exposed pad. Do not derive the footprint from a similarly named FGG package because the ball assignments differ.

Do not treat a same-package ordering code as automatically equivalent. A change from L1 to grade 1, 2, or 3 can alter timing and power, while commercial, industrial, and extended suffixes change environmental requirements. Before replacing XC7A100T-L1FTG256I, compare the complete ordering table, rerun timing at the required voltage and temperature corners, and reconfirm configuration behavior.

Separate high-speed clock and serial-interface routes from sensitive control or measurement paths, and maintain continuous reference planes beneath BGA escape traces. Match differential pair geometry according to the selected I/O standard and fabrication constraints. Constrain clocks and supply distribution in the design tool, then review the post-route timing and signal-integrity exceptions before releasing the PCB for fabrication.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals status was identified for this exact ordering code. AEC-Q100 is not applicable because this is an FPGA rather than an automotive-qualified discrete semiconductor.

डेटा सत्यापन तिथि: 2026-11-18 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

xc7a100t l1ftg256i xc7a100t datasheet xc7a100t fpga xc7a100t l1ftg256i datasheet pdf xc7a100t l1ftg256i pinout xc7a100t 1ftg256i xc7a100t 2ftg256i xc7a100t 3ftg256e xc7a100t l1ftg256i equivalent xc7a100t l1ftg256i replacement xc7a100t l1ftg256i price xc7a100t l1ftg256i stock AMD xc7a100t l1ftg256i xc7a100t l1ftg256i industrial automation xc7a100t l1ftg256i vs xc7a100t-2ftg256i

संबंधित कंपोनेंट्स और शब्द

AMD Xilinx XC7A100T-L1FTG256I XC7A100T-1FTG256I XC7A100T-1FTG256C XC7A100T-2FTG256I XC7A100T-2FTG256C XC7A100T-3FTG256E Artix-7 FPGA field-programmable gate array programmable logic logic cell block RAM DSP resource FTG256 BGA 256-ball grid array surface-mount package 28 nm process technology industrial temperature grade speed grade I/O configuration bitstream static timing analysis AMD Vivado Design Suite UG475 RoHS REACH
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें