XC7A100T-L1FTG256I - 28nm Artix-7 FPGA, 256-BGA | AMD
MPN: XC7A100T-L1FTG256I ✓ Hoạt độngXC7A100T-L1FTG256I Tóm tắt
An FPGA is a reconfigurable digital semiconductor whose programmable lookup tables, routing fabric, memory blocks, and DSP resources implement custom logic in parallel. Within the product hierarchy, the XC7A100T belongs to the Artix-7 family of FPGAs and combines general programmable logic with high-speed serial connectivity and embedded memory. Its architecture allows the same PCB to support multiple firmware or bitstream configurations, shortening development cycles for industrial control, communications, instrumentation, and embedded processing systems.
The Artix-7 family is positioned for low power consumption and cost-sensitive programmable logic. The XC7A100T designation identifies the 100T device density, with the exact logic-cell count, block-RAM capacity, DSP resources, I/O count, speed grade, temperature grade, and package dimensions recorded in the Artix-7 data sheet and product-selection tables. Configuration is performed through the device's dedicated configuration mechanism, and the FTG256 package supports the compact board-space requirements of embedded equipment.
Compared with a fixed-function application-specific integrated circuit, the FPGA provides programmable hardware parallelism, field update capability, and protection against late specification changes. The 28 nm Artix-7 architecture is useful when a design must combine control logic, high-speed interfaces, protocol conversion, or moderate parallel processing without committing to a custom ASIC. The same family also supports migration concepts between device densities, although every migration must be checked against package pinout, power, configuration, and timing constraints.
Typical applications include industrial automation, factory monitoring, data acquisition, network-interface control, embedded vision, test equipment, and compact communications systems. In each case, the FPGA handles parallel transactions and protocol-specific logic while external processors, memories, transceivers, and power regulators support the complete system. AMD's Artix-7 product page identifies the family's focus on low power, low cost, performance per watt, AMS integration, and high-speed transceiver line rates.
A practical design decision is to begin with the FTG256 footprint and speed-grade requirements rather than selecting only by FPGA density. Validate the complete ordering code, exposed-pad connection, decoupling network, configuration interface, memory interface constraints, and bank voltage requirements in the manufacturer data sheet before layout release. This page combines the available manufacturer, distributor, and package resources with application guidance and a package-focused comparison framework for engineering review.
Bộ thay thế dễ dàng lắp đặt cho XC7A100T-L1FTG256I — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với XC7A100T-L1FTG256I (cùng hình factor và footprint) — khác nhau ở Package, Temperature Grade, Mounting Type, Logic Cells, Device Type.
XC7A100T-1FTG256I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC7A100T-1FTG256C
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC7A100T-2FTG256I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC7A100T-2FTG256C
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC7A100T-3FTG256E
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC7A100T-L1FTG256I Tỷ lệ tối đa & tính chất điện
| Device Type | Artix-7 field-programmable gate array |
| FPGA Family | Artix-7 |
| Device Designation | XC7A100T |
| Process Technology | 28 nm |
| Hộp | FTG256, 256-terminal BGA |
| Number of Terminals | 256 terminals |
| I/O Count | 170 I/O |
| Minimum Operating Temperature | -40 °C |
| Maximum Operating Temperature | 100 °C |
| Temperature Grade | Industrial |
| Speed Grade | L1 |
| Programmable Logic Type | FPGA |
| Architecture | Artix-7 programmable logic architecture |
| Kiểu lắp đặt | Surface-mount ball-grid array |
Hướng dẫn cấu hình chân XC7A100T-L1FTG256I ftg256, 256-terminal bga
Cấu hình chân cho XC7A100T-L1FTG256I (ftg256, 256-terminal bga gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho XC7A100T-L1FTG256I.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
XC7A100T-L1FTG256I phù hợp cho 6 Áp dụngs: Industrial Automation Controller, Data Acquisition System, Communications Gateway, Test and Measurement Instrument, Embedded Vision Preprocessor, Power and Energy Management.
Industrial Automation Controller
The XC7A100T-L1FTG256I fits compact industrial controllers that coordinate sensors, actuators, interlocks, and machine-state logic in parallel. Its Artix-7 architecture allows protocol-specific interfaces and control sequences to be combined in one FPGA, reducing the number of discrete logic devices. The -40°C to 100°C industrial temperature range supports equipment deployed in controlled factory environments. Engineers should use the FTG256 pinout files for differential I/O and power placement, then validate timing and I/O voltage choices against the completed design.
Được đề xuất
Data Acquisition System
The XC7A100T-L1FTG256I is well suited to data-acquisition front ends requiring simultaneous sampling control, digital filtering, buffering, and interface management. Its programmable fabric can implement multiple acquisition channels and format conversion in parallel while the FTG256 package limits board footprint. The L1 grade should be selected only after static timing analysis confirms timing closure for the target clock rates and I/O paths. Power estimation must use the actual utilization and switching activity rather than a generic device-level figure.
Được đề xuất
Communications Gateway
The XC7A100T-L1FTG256I can implement communication gateways that combine interface conversion, packet handling, buffering, and control functions in a single programmable device. Parallel FPGA resources allow multiple data paths to operate concurrently, while the 28 nm Artix-7 family is positioned for low-power and low-cost implementations. Package escape routing, differential-pair impedance, clock jitter, and transceiver supply requirements must be reviewed before layout. A grade-2 XC7A100T FTG256 option may be preferable when the L1 timing margin is insufficient.
Được đề xuất
Test and Measurement Instrument
The XC7A100T-L1FTG256I is appropriate for programmable test equipment where sequencing, pattern generation, capture, and data reduction require flexible parallel logic. Its configurable architecture lets engineering teams revise measurement algorithms without changing the PCB, while the industrial temperature range supports controlled laboratory and service environments. The FTG256 implementation must include thermal-via and exposed-pad treatment appropriate to the selected power budget. Timing closure should be checked across voltage and temperature corners before hardware release.
Được đề xuất
Embedded Vision Preprocessor
The XC7A100T-L1FTG256I can implement an embedded-vision preprocessor for pixel transport, thresholding, line detection, color conversion, and frame timing before data reaches an external processor. Parallel operations map naturally to FPGA logic and can reduce host processing latency. The FTG256 package supports compact camera and display modules, but high-speed interfaces require careful bank planning, trace matching, and clocking. Use the official package files to assign pins and verify that all selected I/O standards meet the board's signal-integrity limits.
Được đề xuất
Power and Energy Management
The XC7A100T-L1FTG256I is suitable for programmable energy-control systems that monitor power-conversion stages, coordinate switching sequences, and perform fast control calculations. The FPGA's parallel logic can execute multiple control loops and fault-handling paths with deterministic timing. The L1 industrial device supports operation across a -40°C to 100°C range, but power-system safety, isolation, and surge requirements require separate qualification. Decoupling, supply sequencing, exposed-pad grounding, and thermal design should follow the Artix-7 power and package guidance.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho XC7A100T-L1FTG256I — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | XC7A100T-1FTG256I | XC7A100T-1FTG256C | XC7A100T-2FTG256I | XC7A100T-2FTG256C | XC7A100T-3FTG256E |
|---|---|---|---|---|---|---|
| Package | FTG256 (256-BGA) | FTG256 (256-BGA) | FTG256 (256-BGA) | FTG256 (256-BGA) | FTG256 (256-BGA) | FTG256 (256-BGA) |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| FPGA Family | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 |
| Device Density | XC7A100T | XC7A100T | XC7A100T | XC7A100T | XC7A100T | XC7A100T |
| Speed Designation | L1 | 1 | 1 | 2 | 2 | 3 |
| Temperature Grade | Industrial, -40°C to 100°C | Industrial | Commercial | Industrial | Commercial | Extended |
| Process Technology | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm |
| Programmable Logic Type | FPGA | FPGA | FPGA | FPGA | FPGA | FPGA |
| I/O Count | 170 I/O | 170 I/O | 170 I/O | 170 I/O | 170 I/O | 170 I/O |
Bảo phân biệt quan trọng
- Same-family speed grade aligned with the target L1 design (vsXC7A100T-2FTG256I)
- Industrial temperature ordering for controlled factory environments (vsXC7A100T-2FTG256C)
- Compact 256-terminal package with 170 I/O (vsXC7A100T-1FTG256C)
- Low-power 28 nm Artix-7 platform for programmable parallel logic (vsXC7A100T-3FTG256E)
Ghi chú thiết kế
Use the Artix-7 power-planning guidance to separate core and I/O supply requirements, specify the required sequencing, and connect the FTG256 exposed pad to the appropriate ground plane. Estimated: regulator efficiency and total current cannot be calculated without the design's core voltage, I/O voltage, utilization, clock rate, and switching activity. Validate those values with the AMD power estimator before selecting regulators and magnetics.
Assign every ball from the official XC7A100T FTG256 package file and preserve the recommended ball assignment for configuration, clocks, and high-speed interfaces. Place decoupling capacitance at the associated power balls, keep high-speed return paths continuous, and provide thermal vias beneath the exposed pad. Do not derive the footprint from a similarly named FGG package because the ball assignments differ.
Do not treat a same-package ordering code as automatically equivalent. A change from L1 to grade 1, 2, or 3 can alter timing and power, while commercial, industrial, and extended suffixes change environmental requirements. Before replacing XC7A100T-L1FTG256I, compare the complete ordering table, rerun timing at the required voltage and temperature corners, and reconfirm configuration behavior.
Separate high-speed clock and serial-interface routes from sensitive control or measurement paths, and maintain continuous reference planes beneath BGA escape traces. Match differential pair geometry according to the selected I/O standard and fabrication constraints. Constrain clocks and supply distribution in the design tool, then review the post-route timing and signal-integrity exceptions before releasing the PCB for fabrication.
Thông tin tuân thủ
No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals status was identified for this exact ordering code. AEC-Q100 is not applicable because this is an FPGA rather than an automotive-qualified discrete semiconductor.