AMD

XC95108-10PC84C - 108-Macrocell 5V In-System CPLD | AMD Xilinx

MPN: XC95108-10PC84C ✗ जीवन की समाप्ति
4.75 V to 5.25 V Vdss 84 pins, PLCC (J-lead, 29.31 x 29.31 mm) Package Non-volatile Fast FLASH, supports parallel programming of multiple XC9500 devices Memory
न्यूनतम ऑर्डर मात्रा: 1 |

XC95108-10PC84C अवलोकन

The AMD Xilinx XC95108-10PC84C is a 5 V in-system programmable CPLD (complex programmable logic device) built on Advanced CMOS 0.5 um Fast FLASH technology, providing 108 macrocells (about 2,400 usable gates) with 69 user I/O pins in an 84-pin PLCC (J-lead) surface-mount package rated for 0 C to +70 C commercial operation. It is the 10 ns speed grade of the XC9500 family, the original 5 V architecture that dominated glue-logic and legacy control designs of the late 1990s and early 2000s.

A CPLD is a user-programmable digital logic device in which each macrocell contains a programmable AND/OR logic array plus a flip-flop. Because the logic paths are short and deterministic, a CPLD gives predictable, single-cycle propagation delays and a simple timing model, which is exactly what designers need when a design must meet a fixed bus or handshake timing budget without deep timing analysis.

Key features include 10 ns maximum pin-to-pin logic delay for the -10 speed grade, 5 ns pin-to-pin logic delays on all pins with fCNT operation up to 125 MHz, in-system programmability with a minimum of 10,000 program/erase cycles, and support for parallel programming of multiple XC9500 devices on the same board. The device accepts a 4.75 V to 5.25 V internal supply range and is programmed through 5 V in-system programming, so no dedicated programmer or socket is required once the board is built.

Internally, the XC9500 architecture uses a uniform, non-volatile Fast FLASH configuration memory that is mapped into the logic array, giving the device deterministic, repeatable startup behaviour and allowing field reconfiguration of a deployed board through the same 5 V rails that carry system data. The XC95108 is offered in 84-pin PLCC, 68-pin PLCC, 84-pin PQFP and 100-pin TQFP packages, so the PLCC-84 footprint is shared with several family members for footprint-compatible board reuse.

Typical applications include ISA and PCI bus interface glue logic, multi-drop RS-485 and industrial field-bus conditioning, stepper and relay sequencing in legacy motion controllers, power-supply sequencing and battery-backed monitoring, and long-life test and measurement equipment where the original 5 V design must be maintained rather than redesigned.

When designing around this device, note that it is a legacy 5 V part: outputs are not 3.3 V tolerant, the 0 C to +70 C window excludes industrial temperature grades, and the 5 V in-system programming pins must be routed to accessible test pads or a connector so firmware can be updated after assembly. Plan the I/O budget carefully, since 69 usable I/O in PLCC-84 leaves the remaining pins for power, ground, configuration and control.

This page brings together the manufacturer specification summary, verified distributor availability listings, family-level drop-in alternatives in the same PLCC-84 footprint, and practical design notes that are not reproduced in the original datasheet, so engineers can evaluate a migration path without re-deriving the whole device family from scratch.

के लिए ड्रॉप-इन विकल्प XC95108-10PC84C — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं XC95108-10PC84C (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Usable Gates, RoHS Status, Device Type, Number of Macrocells, Operating Temperature.

Xilinx
Usable Gates: 2,400 gates
Number of Macrocells: 108 macrocells
इसके साथ तुलना करें XC95108-10PC84C →
AMD
Usable Gates: 1,600 gates
RoHS Status: Non-compliant
Device Type: In-system programmable CPLD
इसके साथ तुलना करें XC95108-10PC84C →

XC95108-20PC84C

✅ ड्रॉप-इन
📦 84-pin PLCC (J-lead)
same 108 macrocells, 69 I/O and 84-pin PLCC footprint, but 20 ns tpd versus 10 ns tpd (+100% slower)

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

XC9572-15PC84C

✅ ड्रॉप-इन
📦 84-pin PLCC (J-lead)
same 84-pin PLCC 5 V footprint and 69 I/O, but 72 macrocells versus 108 (-33% logic capacity) and 15 ns tpd versus 10 ns tpd

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

XC9572-10PC84C

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
AMD
📦 84-pin PLCC (J-lead)
In-system programmable CPLD · Four 36V18 function blocks · 72 macrocells · 1,600 gates · 69 I/O · -10 · 5 ns · 7.5 ns

कीमत के लिए संपर्क करें

डेटाशीट देखें →

XC95108L-10PC84C

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
📦 84-pin PLCC (J-lead)
same XC9500 5 V architecture and 84-pin PLCC pinout with 108 macrocells, lower macrocell power/performance variant versus the standard -10 grade

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

XC95144-10PC84C

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
📦 84-pin PLCC (J-lead)
same 84-pin PLCC 5 V footprint, but 144 macrocells versus 108 (+33% logic capacity) at the same 10 ns speed grade

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

XC95108-10PC84C Maximum Ratings और Electrical Characteristics

Device Type In-system programmable CPLD (XC9500 5 V family)
Macrocells 108
Usable Gates 2,400
User I/O Pins 69
Pin Count / Package 84 pins, PLCC (J-lead, 29.31 x 29.31 mm)
माउंटिंग प्रकार Surface Mount
Internal Supply Voltage 4.75 V to 5.25 V
Max Pin-to-Pin Logic Delay (tpd) 10 ns (-10 speed grade)
Pin-to-Pin Logic Delay (best case) 5 ns on all pins, fCNT to 125 MHz
ऑपरेटिंग तापमान 0 C to +70 C (TA)
Programmable Type In-system programmable, minimum 10,000 program/erase cycles
Technology Advanced CMOS 0.5 um Fast FLASH
Configuration Memory Non-volatile Fast FLASH, supports parallel programming of multiple XC9500 devices
RoHS स्थिति RoHS non-compliant
Lead Free Status Contains lead
Part Status Obsolete (legacy 5 V CPLD generation)
Programming 5 V in-system programming

XC95108-10PC84C 5 ns on all pins, fcnt to 125 mhz पिन कॉन्फ़िगरेशन गाइड

XC95108-10PC84C (5 ns on all pins, fcnt to 125 mhz पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।

XC95108-10PC84C के लिए 5 ns on all pins, fcnt to 125 mhz पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: XC95108-10PC84C.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

XC95108-10PC84C के लिए उपयुक्त है 6 अनुप्रयोगs: Legacy ISA / PCI Bus Interface Glue Logic, Multi-Drop RS-485 and Field-Bus Conditioning, Stepper Motor and Relay Sequencing Control, 5V Power Supply Sequencing and System Supervision, Embedded Microcontroller Coprocessor and Bus Glue, Long-Life Test and Measurement Equipment Retrofit.

🖥️

Legacy ISA / PCI Bus Interface Glue Logic

The XC95108-10PC84C is a natural fit for ISA and PCI peripheral cards of the type still found in industrial PCs, test benches and instrumentation. With 108 macrocells (about 2,400 usable gates) and 69 user I/O pins, it can absorb address decode, command strobes, buffer arbitration and FIFO control that would otherwise consume several 74-series logic families. The 10 ns maximum pin-to-pin delay of the -10 speed grade keeps bus strobe-to-acknowledgement paths short, and 5 V in-system programming means a card can be reconfigured in the field through accessible test pads without a socketed programmer.

🌐

Multi-Drop RS-485 and Field-Bus Conditioning

In multi-drop industrial communication nodes, the XC95108-10PC84C can implement bus arbitration, direction control, CRC generation and bit-stuffing framing around a 5 V transceiver. Its deterministic single-cycle timing makes it easy to meet the timing budget of legacy field-bus protocols, where byte-level framing must be completed inside a fixed timer interval. The 69 available I/O pins suit nodes that carry several channels of digital status alongside the bus, and the 0 C to +70 C rating covers indoor enclosure temperatures. For harsher factory environments, a wider-temperature 3.3 V XC9500XL or CoolRunner XLC part is preferred.

🔧

Stepper Motor and Relay Sequencing Control

The XC95108-10PC84C suits open-loop stepper and relay sequencing blocks in legacy motion controllers and industrial machinery, where a small microcontroller is either absent or only supervises motion. Each macrocell's flip-flop and product-term array allows precise pulse-width, direction and interlock logic for step generation, with 108 macrocells giving room for acceleration tables, limit-switch decoding and homing sequences. The 10 ns delay class keeps step-to-step jitter low, and the 5 V supply matches legacy stepper driver enable and opto-isolator input stages. Because the operating range is 0 C to +70 C, enclosure heating or a temperature-rated replacement should be considered near motors.

⚡

5V Power Supply Sequencing and System Supervision

In 5 V-only systems with multiple rails, the XC95108-10PC84C can implement power-supply sequencing, rail monitoring, watchdog heartbeat and reset generation without adding a microcontroller to a simple board. Each macrocell can latch a rail-good level and hold the next enable until the previous rail settles, which is exactly the deterministic behaviour a sequencer needs. With 69 I/O, a single device can supervise several supplies plus fault inputs, and the 5 V in-system programming path lets a technician reload the sequencing table after a field fault. Use the device's non-volatile Fast FLASH configuration so the sequence survives power cycling without a boot loader.

🧩

Embedded Microcontroller Coprocessor and Bus Glue

When a legacy 8-bit microcontroller such as an 8051-class part lacks address space or port count, the XC95108-10PC84C can act as a coprocessor handling address decode, port expansion, timing generation and data buffering. The 108 macrocells and 69 I/O pins allow a wide peripheral bus to be emulated with fixed-cycle access, while the 10 ns delay class keeps interrupt acknowledge and DMA-style handshake windows comfortable. The device's 5 V in-system programming also enables a shared programming header that can load both the coprocessor logic and the host firmware in one manufacturing step, simplifying factory test and field upgrades.

🔬

Long-Life Test and Measurement Equipment Retrofit

The XC95108-10PC84C is widely encountered inside older test and measurement platforms - switch control, relay matrices, trigger routing and front-panel state machines - where a board must be repaired rather than redesigned. Because the device stores its configuration in non-volatile Fast FLASH, a replacement can be programmed in-circuit to reproduce the original behaviour, which shortens repair turnaround considerably. The 69 I/O pins suit dense point matrices and status buses, and the 0 C to +70 C range covers instrument-room conditions. For new instrument development, pair the same functional block with a modern 3.3 V CPLD such as the XC2C128 or CoolRunner XLC family.

अनुशंसित उत्पादों का सारांश

XC9572XL-7VQ64I AMD उपयोग में: Legacy ISA / PCI Bus Interface Glue Logic CS82C54-12 Renesas Electronics उपयोग में: Legacy ISA / PCI Bus Interface Glue Logic XC2C256-7PQ208C AMD उपयोग में: Legacy ISA / PCI Bus Interface Glue Logic CS4223-KSR Cirrus Logic Inc. उपयोग में: Multi-Drop RS-485 and Field-Bus Conditioning APA300-FGG144 Microchip Technology उपयोग में: Multi-Drop RS-485 and Field-Bus Conditioning, Stepper Motor and Relay Sequencing Control XC2C384-7PQ208C Xilinx उपयोग में: Multi-Drop RS-485 and Field-Bus Conditioning A3P400-FGG256 Microchip Technology उपयोग में: Stepper Motor and Relay Sequencing Control, Long-Life Test and Measurement Equipment Retrofit MC74F243M onsemi उपयोग में: Stepper Motor and Relay Sequencing Control DS90C387VJD-TI Texas Instruments उपयोग में: 5V Power Supply Sequencing and System Supervision R5F110NJGLA#U0 Renesas Electronics उपयोग में: 5V Power Supply Sequencing and System Supervision APA150-FG144I Microchip Technology उपयोग में: 5V Power Supply Sequencing and System Supervision MC74F538N onsemi उपयोग में: Embedded Microcontroller Coprocessor and Bus Glue ATXMEGA64A1-CUR Microchip Technology उपयोग में: Embedded Microcontroller Coprocessor and Bus Glue XC2C128-7CP132C AMD उपयोग में: Embedded Microcontroller Coprocessor and Bus Glue XC9572XL-5VQ44C AMD उपयोग में: Long-Life Test and Measurement Equipment Retrofit TS924IPT STMicroelectronics उपयोग में: Long-Life Test and Measurement Equipment Retrofit
What is the XC95108-10PC84C?
The XC95108-10PC84C is a 108-macrocell, 5 V in-system programmable CPLD from the XC9500 family, supplied in an 84-pin PLCC J-lead package. According to the Xilinx/AMD XC95108 in-system programmable CPLD data sheet, the device provides 108 macrocells (approximately 2,400 usable gates) and 69 user I/O pins, and it is the 10 ns speed grade. The part is built on Advanced CMOS 0.5 um Fast FLASH technology and operates from a 4.75 V to 5.25 V internal supply.
What is the XC95108-10PC84C pinout and package?
The XC95108-10PC84C is packaged in an 84-pin PLCC (PLCC-84) with J-shaped leads on a 29.31 mm x 29.31 mm body, surface mount. Of the 84 pins, 69 are user I/O, with the remainder used for VCC, ground, program and control signals. Because the PLCC-84 outline is shared across the XC9500 family, board footprints can be reused across several devices. Use the pin-description table in the manufacturer data sheet when assigning tracks and when checking J-lead clearances against adjacent connectors and heatsinks.
Where to download the XC95108-10PC84C datasheet PDF?
The authoritative document is the XC95108 In-system Programmable CPLD Data Sheet (DS066), published by Xilinx, now AMD. The AMD documentation portal hosts the current revision of DS066 for the XC95108 device, and the XC9500 family product specification covers the shared 5 V Fast FLASH architecture. These two documents together give pin tables, macrocell architecture, DC characteristics, AC timing and 5 V in-system programming waveforms needed to review a legacy design.
Is the XC95108-10PC84C still in production?
The XC95108-10PC84C is an obsolete legacy part: it belongs to the original 5 V XC9500 CPLD generation, which was superseded by the 3.3 V XC9500XL and CoolRunner families. Because the device is no longer in general production, new designs should not be started on it and supply is limited to remaining stock and legacy channels. The manufacturer lists the part as obsolete, so any ongoing build should be supported by sourcing from inventory rather than by an allocation.
What is the difference between XC95108-10PC84C and XC95108-20PC84C?
The two parts are functionally identical in macrocell count, I/O count and package; the only difference is the speed grade. The -10 suffix gives a 10 ns maximum pin-to-pin logic delay while the -20 suffix gives 20 ns, so the -20 part is roughly 50 percent slower and is the choice when timing margin matters more than throughput. Both share the same 84-pin PLCC footprint and 5 V supply, so they are drop-in interchangeable for most designs.
XC95108-10PC84C vs XC9572-15PC84C - which is better for a legacy 5V control board?
Choose the XC95108-10PC84C when logic depth is the priority: it offers 108 macrocells against 72 on the XC9572-15PC84C, a 50 percent larger logic array, plus a faster 10 ns speed grade versus 15 ns. Both share the 84-pin PLCC 5 V footprint and 69 I/O pins, so the XC95108 is the better fit for dense decode or glue logic. The XC9572-15PC84C is preferable when the design is I/O-dense rather than macrocell-dense and when a slower, lower-power logic path is acceptable.
When should I choose the XC95108-10PC84C over a 3.3V CPLD?
Choose the XC95108-10PC84C only when the surrounding system is genuinely 5 V: the device requires 4.75 V to 5.25 V and its outputs are 5 V CMOS levels, so it cannot be tied directly to 3.3 V logic. In addition, the 0 C to +70 C commercial temperature window rules it out of harsh industrial environments. For any new 3.3 V or mixed-signal design, an XC9500XL, CoolRunner XLC or comparable modern device is the better engineering choice.
Is the XC95108-10PC84C suitable for long-life industrial equipment?
The XC95108-10PC84C is suitable only for mild commercial environments because its rated operating range is 0 C to +70 C. It suits bench instruments, test and measurement platforms, legacy PC add-in cards and indoor controller boards that must be maintained without a redesign. For factory-floor equipment with extended temperature requirements, choose a 3.3 V XC9500XL or CoolRunner XLC part, which offers wider temperature grades and lower supply voltage.
What can replace the XC95108-10PC84C?
The most direct replacement is another XC9500-family device in the same 84-pin PLCC footprint: the XC95108-20PC84C for a slower but electrically identical part, the XC9572-15PC84C or XC9572-10PC84C for a smaller 72-macrocell array, and the XC95144-10PC84C when more logic capacity is needed. Because the macrocell count changes between options, confirm macrocell usage, I/O assignment and timing in the design tool before releasing a new board.
Is the XC95108-20PC84C the same as the XC95108-10PC84C?
No, they are the same device in different speed grades rather than identical parts. The XC95108-10PC84C has a 10 ns maximum pin-to-pin logic delay while the XC95108-20PC84C has a 20 ns delay, so they share the 108 macrocells, 69 I/O pins, 84-pin PLCC package and 5 V supply but differ in timing. For a drop-in substitution, confirm that the slower part still meets the critical path requirement in your design.
Is there a cross-brand drop-in replacement for the XC95108-10PC84C?
There is no cross-manufacturer PLCC-84 5 V CPLD that offers a verified pin-for-pin match to the XC95108 footprint, so a true drop-in from another vendor is not available. Cross-brand migration in practice means moving to a different package and supply rail, for example to a 3.3 V CoolRunner XLC or Lattice CPLD in a QFN or TQFP outline, which requires a new PCB layout, revised I/O standardisation and recompiled design files rather than a simple part substitution.
Where can I buy the XC95108-10PC84C?
The XC95108-10PC84C is an obsolete legacy device, so supply comes from remaining distributor and specialist inventory rather than from a current production allocation. Use the Request a Quote form on this page to ask for current availability, remaining stock and the supported order multiples for the 84-pin PLCC package. Quote requests are the fastest way to confirm lead time for a part that is no longer in general production.
What is the lead time for the XC95108-10PC84C?
Lead time for an obsolete XC9500-series device depends entirely on remaining channel inventory rather than on a manufacturing schedule, and it can vary substantially between suppliers and between quarters. Request the current lead time through the Request a Quote form on this page, and state your required quantity, package variant and annual consumption so the available stock can be matched to your build schedule. For safety-critical or long-life programs, consider a last-time-buy or an approved alternate device.
Is the XC95108-10PC84C in stock?
Stock levels for the XC95108-10PC84C change continuously because the device is obsolete and is supplied only from residual inventory. Distributor listings and aggregated part pages show the part as orderable, but that is not a guarantee of inventory for any quantity you require. Use the Request a Quote form on this page to check current stock, quantity breaks and scheduled delivery for the exact 84-pin PLCC ordering code you need.
What are the key specifications of the XC95108-10PC84C that engineers should know?
The key facts are: 108 macrocells and about 2,400 usable gates, 69 user I/O pins, an 84-pin PLCC J-lead surface-mount package, a 4.75 V to 5.25 V internal supply range, and a 10 ns maximum pin-to-pin logic delay for the -10 speed grade. Additional design-critical parameters are 5 ns pin-to-pin logic delays on all pins with fCNT operation up to 125 MHz, in-system programmability with a minimum of 10,000 program/erase cycles, 0 C to +70 C commercial operation and 0.5 um Advanced CMOS Fast FLASH technology.

के लिए इंजीनियरिंग संदर्भ डेटा XC95108-10PC84C — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the XC95108-10PC84C when you must maintain or repair an existing 5 V design that uses a 84-pin PLCC footprint and needs 108 macrocells with a 10 ns logic delay - for example ISA/PCI glue logic, RS-485 framing, stepper sequencing or instrument point matrices. Pick the XC95108-20PC84C if the same board needs a cheaper, slower timing grade and the critical path has ample margin. Pick the XC9572-15PC84C or XC9572-10PC84C when the design is I/O-dense rather than macrocell-dense and 72 macrocells are sufficient, or when a faster grade is preferred at reduced logic capacity. Pick the XC95144-10PC84C when the design has outgrown 108 macrocells but must stay in the 84-pin PLCC 5 V outline. For any new 3.3 V, industrial-temperature or RoHS-compliant design, migrate to a modern XC9500XL, CoolRunner XLC or equivalent device instead of starting on this obsolete part.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद XC95108-20PC84C XC9572-15PC84C XC9572-10PC84C XC95144-10PC84C
Package 84-pin PLCC (J-lead) 84-pin PLCC (J-lead) - same 84-pin PLCC (J-lead) - same 84-pin PLCC (J-lead) - same 84-pin PLCC (J-lead) - same
Brand AMD (Xilinx XC9500 family) AMD (Xilinx XC9500 family) AMD (Xilinx XC9500 family) AMD (Xilinx XC9500 family) AMD (Xilinx XC9500 family)
Macrocells 108 (approx. 2,400 usable gates) 108 (approx. 2,400 usable gates) 72 - 33% lower logic capacity 72 - 33% lower logic capacity 144 - 33% higher logic capacity
User I/O Pins 69 69 69 69 69
Max Pin-to-Pin Logic Delay (tpd) 10 ns 20 ns - 100% slower 15 ns - 50% slower 10 ns - same speed grade 10 ns - same speed grade
Internal Supply Voltage 4.75 V to 5.25 V (5 V) 4.75 V to 5.25 V (5 V) 5 V family 5 V family 5 V family
Programming 5 V in-system programmable, min 10,000 program/erase cycles 5 V in-system programmable 5 V in-system programmable 5 V in-system programmable 5 V in-system programmable
Operating Temperature 0 C to +70 C (commercial) 0 C to +70 C (commercial) 0 C to +70 C (commercial) 0 C to +70 C (commercial) 0 C to +70 C (commercial)
Technology Advanced CMOS 0.5 um Fast FLASH Advanced CMOS 0.5 um Fast FLASH Advanced CMOS 0.5 um Fast FLASH Advanced CMOS 0.5 um Fast FLASH Advanced CMOS 0.5 um Fast FLASH
Lifecycle Status Obsolete Obsolete (legacy 5 V generation) Obsolete (legacy 5 V generation) Obsolete (legacy 5 V generation) Obsolete (legacy 5 V generation)
RoHS Compliance RoHS non-compliant (contains lead) RoHS non-compliant RoHS non-compliant RoHS non-compliant RoHS non-compliant

मुख्य विशेषताएँ

  • Largest logic array in the 84-pin PLCC 5 V footprint (बनामXC9572-15PC84C)
  • Fastest speed grade available in the 5 V XC9500 PLCC-84 family (बनामXC95108-20PC84C)
  • Extra macrocell headroom for expansion without a footprint change (बनामXC9572-10PC84C)
  • Fully in-system programmable for field updates on legacy boards (बनामXC9572-15PC84C)

डिज़ाइन नोट्स

The 84-pin PLCC body measures 29.31 mm x 29.31 mm and uses J-shaped leads, so the socket-style footprint needs generous clearance for a PLCC socket if the board is to be reworked. Reserve a 1.0 mm to 1.27 mm grid of pads on a 0.1 inch pitch with the correct J-lead land pattern, and keep tall components and heat sinks away from the J-lead exit side. The exposed underside of a PLCC is not a thermal pad, so copper pours beneath the device add little more than a small heat-spreading effect.

Estimated: the XC9500 architecture consumes substantially more power than a 3.3 V CPLD because the internal supply is 5 V and the configuration cells are large. Budget 5 V rails with at least 10 percent headroom for inrush during in-system programming, and decouple each VCC pin group with a 0.1 uF ceramic capacitor plus a bulk electrolytic near the array. Because 5 V in-system programming draws additional current while erasing and writing Flash cells, avoid placing the programming test pads behind a series ferrite bead that would limit current during a field update.

Do not treat this device as a modern 3.3 V part: its I/O drive is 5 V CMOS and outputs are not 3.3 V tolerant, so any 3.3 V signal connected to an input or output can be over-stressed or fail to meet VIH/VIL thresholds. Also note the 0 C to +70 C commercial rating, which excludes most factory-floor and automotive environments. Finally, because the macrocell count differs across the XC9500 family, verify that a substituted part still fits the design in the programming tool before committing to a replacement.

Route the 5 V in-system programming pins (TCLK, TDI, TMS, TDO and the configuration control) to a dedicated header or pogo-pad block so the board can be reprogrammed in circuit after assembly or in the field. Keep these nets away from high-speed or high-current switching nodes, and provide a defined programming-mode strap so the device enters configuration mode predictably. Because the XC9500 family supports parallel programming of multiple devices, shared programming buses are acceptable when the per-device select logic is unambiguous.

With a 10 ns maximum pin-to-pin delay and operation up to 125 MHz fCNT, edge rates are fast enough that board-level return paths matter. Provide a continuous ground plane under the device, avoid splitting the plane beneath the package, and terminate any externally driven clock or latch input with a short stub and a source-terminating resistor. The macrocell architecture is deterministic, but long unprotected traces can still degrade setup margin against the 10 ns grade, so re-check critical paths with the timing report rather than relying on device delay numbers alone.

अनुपालन जानकारी

RoHS
Non Compliant
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
No
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The XC95108-10PC84C is listed as RoHS non-compliant and containing lead, consistent with the legacy 5 V XC9500 generation. AEC-Q100 qualification does not apply to this commercial 0 C to +70 C device, and no REACH, halogen-free or conflict-minerals statement is published for the part.

डेटा सत्यापन तिथि: 2026-11-11 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

XC95108 datasheet xc95108 xilinx xc95108 pinout XC95108-10PC84C datasheet pdf XC95108-10PC84C pinout XC95108-10PC84C price XC95108-10PC84C stock XC95108-10PC84C lead time XC95108-10PC84C equivalent XC95108-10PC84C replacement XC95108-10PC84C vs XC9572-15PC84C XC95108-10PC84C footprint PLCC-84 XC95108-10PC84C 108 macrocell 5V CPLD XC95108-10PC84C legacy ISA bus glue logic

संबंधित कंपोनेंट्स और शब्द

AMD Xilinx XC95108-10PC84C XC95108-20PC84C XC9572-15PC84C XC9572-10PC84C XC95144-10PC84C XC9500 family CPLD complex programmable logic device macrocell in-system programmable ISP Fast FLASH Advanced CMOS 0.5 um PLCC-84 PLCC J-lead surface mount SMD pin-to-pin logic delay fCNT 5 V CMOS logic RoHS ISA bus RS-485
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें