Produk (46.000+)

MAX202ICSE+T - 120kbps Dual RS-232 Transceiver | Analog Devices
MAX202ICSE+T

MAX202ICSE+T - 120kbps Dual RS-232 Transceiver | Analog Devices

Analog Devices MAX202ICSE+T is a dual RS-232 line transceiver with two drivers and two receivers, data rates up to 120 kbps, and a 4.5 V to 5.5 V single supply. It is packaged in a 16-pin narrow SOIC and includes on-chip charge-pump circuitry for ±5 V EIA/TIA-232E output levels. The MAX202ICSE+T is designed for equipment requiring bidirectional RS-232 connectivity from a 5 V supply and external 0.1 µF charge-pump capacitors. An RS-232 transceiver is an interface IC that combines line drivers and line receivers in one package. The driver converts low-voltage logic signals into bipolar RS-232 levels, while the receiver converts bipolar line signals back into logic-compatible levels. The RS-232 interface belongs to the interface IC hierarchy, where transceiver functions bridge older serial equipment and modern embedded or computer-based control systems. The MAX202 offers two transmit channels, two receive channels, operation from a 4.5 V to 5.5 V supply, and data rates in excess of 120 kbps when loaded according to EIA/TIA-232E. Its integrated charge-pump circuitry eliminates the need for a separate bipolar supply. The 16-pin SOIC package supports compact surface-mount designs, while the +T ordering code identifies the tape-and-reel shipping format. Technically, the charge-pump network creates the positive and negative voltage rails needed by the line drivers. Four external 0.1 µF capacitors support the charge-pump function. The receivers provide hysteresis for reliable signal detection, while the drivers maintain approximately ±5 V EIA/TIA-232E output levels. The listed operating range for the MAX202ICSE is 0°C to 70°C, with 500 mV receiver hysteresis. Typical uses include RS-232 links between embedded controllers and industrial peripherals, service-console adapters, laboratory equipment, and legacy communication ports. The device is particularly suitable when a system already has a 5 V rail and needs bidirectional serial connectivity without adding a separate negative power supply. Appropriate transient protection and grounding remain necessary when connecting to external cables. When laying out the PCB, place all four charge-pump capacitors close to their associated IC pins and keep the high-current driver outputs away from sensitive receiver and logic traces. Confirm the external cable length, signal integrity, grounding strategy, and protection requirements against the operating environment. The MAX202ICSE+T does not provide a complete board-level surge-protection solution. This product page consolidates the MAX202 family specifications, package details, temperature-grade alternatives, and practical PCB guidance into an engineer-focused reference. It also identifies the functional distinctions among compatible MAX202 ordering codes so that a replacement can be selected without changing the existing 16-pin SOIC footprint.

Permintaan RFG Kontak
MAX202ID - 120kbps Dual RS-232 Transceiver | Texas Instruments
MAX202ID

MAX202ID - 120kbps Dual RS-232 Transceiver | Texas Instruments

The Texas Instruments MAX202ID is a 5 V dual RS-232 line driver and receiver, commonly called a 2/2 transceiver, with a maximum data rate of 120 kbps and ±15 kV ESD protection in a 16-pin SOIC package. It provides two line drivers, two line receivers, and an onboard dual charge-pump circuit. The interface meets TIA/EIA-232-F requirements and bridges TTL or CMOS logic levels with the positive and negative voltage signaling used by RS-232. An RS-232 transceiver is an interface IC within the broader communications-interface and semiconductor hierarchy. Its driver channels convert logic-level inputs into bipolar RS-232 outputs, while its receiver channels convert bipolar serial inputs into logic-level signals. The MAX202ID integrates both directions into one package, making it suitable for asynchronous serial links, industrial control links, data acquisition equipment, and legacy computer peripherals. Key features include operation from a single 5 V supply, a 120 kbps maximum signaling rate, ±9 V output levels, and ±15 kV human-body-model ESD protection on the serial-port pins, including ground. Four external 0.1 µF capacitors support the integrated charge pump. The device is designed to be interchangeable with the Maxim MAX202 and is identified as a 16-SOIC part operating across the industrial temperature range. Technically, the MAX202ID combines two transmit channels and two receive channels with a dual charge pump. The charge pump generates the voltage excursions needed by RS-232 even though the IC itself operates from 5 V. Pin-compatible alternatives identified in the supplied cross-reference material include MAX202EESE+T and MAX202EWE+; their package and terminal compatibility should still be checked against the exact production schematic before substitution. Typical uses include RS-232 links between microcontrollers and external equipment, instrumentation, service interfaces, and industrial serial adapters. Its 120 kbps rate is suitable for many asynchronous control and data-transfer applications but is not the choice for higher-bandwidth RS-232 links. The integrated ESD protection improves resilience when the connector is exposed to user-contact transients. Design attention should be given to charge-pump capacitor placement, grounding, and the voltage drop across the external RS-232 connection. The four specified 0.1 µF capacitors should be placed close to their associated pins, and the ground path should be short and continuous. A logic-side supply decoupler and appropriately rated serial connector are also important for reliable operation. This page consolidates the verified manufacturer and distributor information, practical RS-232 design guidance, application fit, and same-footprint replacement context for engineers evaluating the MAX202ID. Distributor pricing and availability should be checked against the current source data before purchase.

Permintaan RFG Kontak
MAX202IDG4 - 5V Dual RS-232 Transceiver | Texas Instruments
MAX202IDG4

MAX202IDG4 - 5V Dual RS-232 Transceiver | Texas Instruments

The Texas Instruments MAX202IDG4 is a 5 V dual RS-232 line driver and receiver with two transmit channels, two receive channels, and integrated charge-pump voltage generation. It supports data rates up to 120 kbps, provides ±9 V driver outputs, and includes ±15 kV ESD protection on the serial-port pins. The device is packaged in a 16-pin SOIC. An RS-232 interface transceiver is an interface IC that converts logic-level signals between a computer or embedded controller and the voltage levels used by an RS-232 serial link. In the signal path, the line-driver section converts TTL or CMOS logic into bipolar RS-232 levels, while the receiver section restores the logic signal. As a transceiver, the MAX202IDG4 combines both functions within one package. Key features include a single 5 V supply, dual-driver and dual-receiver configuration, ±15 kV ESD protection, and operation over the industrial temperature range of -40°C to +85°C. The integrated dual charge-pump circuit generates the positive and negative voltages required by the RS-232 drivers, eliminating the need for external supply rails. The ±9 V output swing provides compatibility with standard RS-232 links. The device meets EIA-232-F requirements and supports full-duplex serial communication through two independent driver and receiver paths. Its 120 kbps maximum data rate suits legacy serial ports, industrial control links, service interfaces, and embedded systems that retain an RS-232 connector. The integrated ESD structures improve robustness at connector-facing pins, although external protection and layout practices remain important in exposed environments. Typical applications include industrial serial controllers, laboratory equipment, POS terminals, data-acquisition systems, and service ports for embedded equipment. The MAX202IDG4 is particularly useful where a logic-level UART must communicate with an RS-232 host through a 16-SOIC footprint. When laying out the circuit, place the charge-pump capacitors and the receiver and driver bypass capacitors directly beside their associated pins. Route connector-side traces away from sensitive logic, and connect the interface ground reference properly. Verify the UART baud rate against the device's 120 kbps limit and confirm the cable length against the selected RS-232 standard. This page combines manufacturer specifications, application guidance, drop-in comparison options, and practical interface-design notes to help engineers evaluate the MAX202IDG4 beyond a basic catalog description.

Permintaan RFG Kontak
MAX202IDR - 120kbps Dual RS-232 Transceiver | Texas Instruments (Tape & Reel)
MAX202IDR

MAX202IDR - 120kbps Dual RS-232 Transceiver | Texas Instruments (Tape & Reel)

The Texas Instruments MAX202IDR is a 5 V dual RS-232 line driver and receiver, commonly called a 2/2 transceiver, with a maximum data rate of 120 kbps and ±15 kV ESD protection in a 16-pin SOIC package. It provides two line drivers, two line receivers, and an onboard dual charge-pump circuit. The interface meets TIA/EIA-232-F requirements and bridges TTL or CMOS logic levels with the positive and negative voltage signaling used by RS-232. An RS-232 transceiver is an interface IC within the broader communications-interface and semiconductor hierarchy. Its driver channels convert logic-level inputs into bipolar RS-232 outputs, while its receiver channels convert bipolar serial inputs into logic-level signals. The MAX202IDR integrates both directions into one package, making it suitable for asynchronous serial links, industrial control links, data acquisition equipment, and legacy computer peripherals. Key features include operation from a single 5 V supply, a 120 kbps maximum signaling rate, ±9 V output levels, and ±15 kV human-body-model ESD protection on the serial-port pins, including ground. Four external 0.1 µF capacitors support the integrated charge pump. The device is designed to be interchangeable with the Maxim MAX202 and is identified as a 16-SOIC part operating across the industrial temperature range. Technically, the MAX202IDR combines two transmit channels and two receive channels with a dual charge pump. The charge pump generates the voltage excursions needed by RS-232 even though the IC itself operates from 5 V. Pin-compatible alternatives identified in the supplied cross-reference material include MAX202EESE+T and MAX202EWE+; their package and terminal compatibility should still be checked against the exact production schematic before substitution. Typical uses include RS-232 links between microcontrollers and external equipment, instrumentation, service interfaces, and industrial serial adapters. Its 120 kbps rate is suitable for many asynchronous control and data-transfer applications but is not the choice for higher-bandwidth RS-232 links. The integrated ESD protection improves resilience when the connector is exposed to user-contact transients. Design attention should be given to charge-pump capacitor placement, grounding, and the voltage drop across the external RS-232 connection. The four specified 0.1 µF capacitors should be placed close to their associated pins, and the ground path should be short and continuous. A logic-side supply decoupler and appropriately rated serial connector are also important for reliable operation. This page consolidates the verified manufacturer and distributor information, practical RS-232 design guidance, application fit, and same-footprint replacement context for engineers evaluating the MAX202IDR. Distributor pricing and availability should be checked against the current source data before purchase.

Permintaan RFG Kontak
MAX202IN - 120kbps Dual RS-232 Transceiver | Texas Instruments
MAX202IN

MAX202IN - 120kbps Dual RS-232 Transceiver | Texas Instruments

The Texas Instruments MAX202IN is a 5 V dual RS-232 line driver and receiver with two transmit channels, two receive channels, integrated charge-pump voltage conversion, and ±15 kV human-body-model ESD protection on the serial-port pins. It operates at up to 120 kbit/s and uses external 0.1 µF charge-pump capacitors. The MAX202IN is packaged for through-hole industrial and legacy serial-interface designs, subject to confirmation of the exact ordering code and package variant. An RS-232 transceiver is the interface between a modern controller’s logic-level UART signals and the higher-voltage, ground-referenced RS-232 bus. A line driver converts outgoing logic levels into RS-232 levels, while a line receiver converts incoming bus levels into logic-compatible signals. In the signal-chain hierarchy, the MAX202IN belongs to the interface-IC class and specifically implements an RS-232 line interface for asynchronous serial communication. The verified device data identifies a 5 V supply, 120 kbit/s operation, ±9 V output capability, and ±15 kV ESD protection. These specifications suit equipment that needs bidirectional RS-232 conversion, including PC serial adapters, industrial control links, instrumentation, and legacy peripheral connections. The integrated charge pump generates the bipolar voltage required by RS-232 drivers, reducing the external support circuit compared with discrete implementations. The device uses a dual charge-pump circuit with four small external capacitors. These capacitors must be selected and placed according to the manufacturer datasheet, with short, symmetric routing helping preserve signal and charge-pump performance. The serial-port pins are the primary ESD-sensitive interface, so external protection may still be considered when cables are long, exposed, or routed through industrial environments. Typical applications include multi-drop or point-to-point serial links, service-console equipment, test systems, and embedded controller interfaces that retain an RS-232 physical layer. Because the MAX202IN is designed for 5 V operation, verify the host supply, logic levels, connector wiring, and ground strategy before placing it in a modern 3.3 V design. Do not infer 3.3 V compatibility from the RS-232 signal levels alone. For reliable PCB integration, use the manufacturer’s specified capacitor values, keep the charge-pump loop compact, route driver outputs and receiver inputs away from sensitive analog nodes, and provide a low-impedance ground return. Verify receive thresholds and bus termination against the system cable length and topology. This product page combines the verified manufacturer data, package requirements that remain subject to datasheet confirmation, and application guidance for engineers evaluating a legacy serial interface.

Permintaan RFG Kontak
MAX202IPW - 5V Dual RS-232 Transceiver | Texas Instruments
MAX202IPW

MAX202IPW - 5V Dual RS-232 Transceiver | Texas Instruments

The Texas Instruments MAX202IPW is a 5 V dual-channel RS-232 line driver and receiver rated for data rates up to 120 kbit/s, with ±9 V output swing, ±15 kV ESD protection, and a 16-pin TSSOP package. The device provides two transmit channels and two receive channels for bidirectional serial-port interfaces. An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232-compatible differential voltage levels and converts received RS-232 signals back into logic levels. The MAX202 belongs to the RS-232 transceiver hierarchy, combining line drivers, line receivers, and a dual charge-pump circuit in one package. It connects asynchronous communication controllers, such as microcontrollers and UART peripherals, to RS-232 serial ports. Key features include a nominal 5 V supply, operation across a 4.5 V to 5.5 V supply range, ±9 V output swing, and ±15 kV human-body-model ESD protection on the serial-port pins. The IC supports operation to 120 kbit/s and includes on-chip charge-pump circuitry, reducing the external component count compared with discrete RS-232 designs. The MAX202 provides two drivers and two receivers, allowing two RS-232 links to be implemented with one device. Its on-chip dual charge pump generates the voltage conversion required by the transmitter stage. Four external 0.1 µF capacitors support the charge-pump function, and the device is designed to meet TIA/EIA-232-F and ITU V.28 interface requirements. Typical applications include industrial serial-port equipment, data-acquisition systems, point-of-sale terminals, service interfaces, embedded control systems, and legacy peripheral connectivity. The MAX202IPW is particularly appropriate where compact PCB area, bidirectional RS-232 communication, and built-in ESD protection are important. Designers should place the four 0.1 µF charge-pump capacitors close to their associated pins, maintain short return paths, and connect the transceiver ground to the equipment ground. Cable-side ESD protection and isolation requirements should be evaluated separately because the integrated ±15 kV protection specification does not remove the need for a robust mechanical and grounding design. This product data combines the verified manufacturer specifications with same-package replacement analysis, practical layout guidance, and a parameter-by-parameter comparison. It is intended to help engineers identify whether a candidate is truly pin-compatible rather than merely functionally similar.

Permintaan RFG Kontak
MAX202IPWRE4 - 120 kbit/s Dual RS-232 Transceiver | Texas Instruments
MAX202IPWRE4

MAX202IPWRE4 - 120 kbit/s Dual RS-232 Transceiver | Texas Instruments

The Texas Instruments MAX202IPWRE4 is a 5 V dual RS-232 line driver and receiver with ±15 kV ESD protection, operating at up to 120 kbit/s in a 16-pin TSSOP package. The integrated device contains two line drivers, two line receivers, and a dual charge-pump circuit. Its pin-to-pin interface supports the transmission and reception of RS-232 signals between an asynchronous communication controller and a serial-port connector. An RS-232 transceiver is an interface IC that converts logic-level signals into bipolar RS-232 line levels and converts received line signals back into logic-compatible levels. It belongs to the interface IC hierarchy, where transceivers combine drivers, receivers, and voltage-level conversion for reliable data links. The MAX202IPWRE4 implements this function with integrated charge pumps and external bypass capacitors, reducing the discrete component count required around a conventional RS-232 port. The principal operating characteristics include a 5 V supply, a maximum data rate of 120 kbit/s, and ±15 kV human-body-model ESD protection on the serial-port connection pins, including ground. The device meets or exceeds TIA/EIA-232-F and ITU v.28 requirements. Two external 0.1 µF capacitors support the charge-pump circuit, while its 2/2 transceiver organization supports two transmit and two receive channels in one package. Internally, the dual charge-pump circuit generates the positive and negative voltage levels required by RS-232 drivers. The receivers convert those bipolar levels into CMOS-compatible signals for the host controller. This integrated architecture is especially useful for legacy serial equipment, industrial control links, service interfaces, and embedded systems that retain an RS-232 port while using modern digital control logic. Typical uses include point-to-point asynchronous serial links, instrument-control consoles, barcode and identification equipment, industrial diagnostics, and communication between a host UART and a DB9 or equivalent RS-232 connector. The dual-channel arrangement can serve two independent serial directions or paired command-and-status paths where channel count permits. System designers should also account for the cable, grounding, and connector requirements of the RS-232 standard. Place each 0.1 µF charge-pump capacitor close to its designated IC pins and provide a low-impedance connection to the device ground. Keep the interface trace routing compact, and route the exposed RS-232 pins only toward the external connector because those nets carry high-voltage transients. A suitable serial connector and protection network should be placed close to the board edge. This page consolidates the MAX202IPWRE4 electrical characteristics, package information, qualified comparison references, and practical PCB guidance into an engineer-focused guide. It also identifies where the available cross-reference records do not establish enough evidence to claim additional drop-in replacements.

Permintaan RFG Kontak
MAX211CAI+ - +5V RS-232 Transceiver, 4 Drivers/5 Receivers, SSOP-28
MAX211CAI+

MAX211CAI+ - +5V RS-232 Transceiver, 4 Drivers/5 Receivers, SSOP-28

The Maxim Integrated MAX211CAI+ is a +5V RS-232 transceiver with four 0.1µF external charge-pump capacitors and integrated DC-DC charge-pump circuitry in a 28-pin SSOP package. It delivers four RS-232 drivers and five RS-232 receivers, supporting data rates in excess of 120 kbps while maintaining ±5V EIA/TIA-232E compliant output levels. The MAX211CAI+ operates from a single +4.5V to +5.5V supply. An RS-232 transceiver is an interface IC that converts logic-level UART signals (0/5V CMOS/TTL) to the bipolar ±5V to ±12V voltage levels required by the legacy EIA/TIA-232E serial communication standard. RS-232 transceivers sit between a microcontroller UART and an external DB9/DB25 connector, providing level shifting, inverting, and electrostatic discharge protection. In the broader component taxonomy, the MAX211CAI+ belongs to line transceivers -> interface ICs -> integrated circuits. Key features include single +5V supply operation (no ±12V rails needed), 4 drivers + 5 receivers, integrated charge pump with four small 0.1µF capacitors, ±5V RS-232 output levels compliant with EIA/TIA-232E, and guaranteed data rate above 120 kbps. The 28-pin SSOP (Shrink Small Outline Package) occupies approximately 40% of the board area of an equivalent 28-pin SO package. The MAX211CAI+ uses Maxim's proprietary charge-pump architecture with a flying capacitor and reservoir capacitors to generate the +10V and -10V rails needed for true RS-232-compliant signaling from a single +5V input. This eliminates the need for multiple system power rails and permits direct connection to any 5V microcontroller UART. The device is built on a BiCMOS process that combines bipolar drivers for robust ±5V output swing with CMOS logic for low power consumption. Typical applications include point-of-sale terminals, industrial control serial ports, legacy PC serial ports, embedded debugging consoles, and any MCU-to-RS232 interface. The MAX211CAI+ is widely used in designs that need to retain compatibility with older RS-232 peripherals while running off a single 5V rail. When designing with the MAX211CAI+, place the four 0.1µF charge-pump capacitors (C1+, C1-, C2+, C2-) as close to the IC pins as possible to minimize parasitic inductance. Use 10µF tantalum or ceramic bypass capacitors on VCC and V+ pins to suppress ripple from the charge-pump switching. For ESD protection on the RS-232 side, add an external TVS diode array rated for ±15kV HBM. This page consolidates distributor pricing (DigiKey, Mouser, LCSC), drop-in alternatives, and practical PCB-layout notes for the MAX211CAI+ that the bare datasheet does not provide.

Permintaan RFG Kontak
MAX211CDB - 120 kbit/s 4/5 RS-232 Transceiver | Texas Instruments
MAX211CDB

MAX211CDB - 120 kbit/s 4/5 RS-232 Transceiver | Texas Instruments

The Texas Instruments MAX211CDB is a 5 V multichannel RS-232 line driver and receiver with four drivers, five receivers, operation up to 120 kbit/s, and ±15 kV human-body-model ESD protection on the bus pins. It is packaged in a 28-pin SSOP. According to the Texas Instruments product page, its driver outputs swing to ±9 V, allowing it to meet the voltage requirements of RS-232 systems operating from one 5 V supply. An RS-232 transceiver is an interface IC that converts logic-level signals into differential, voltage-swinged serial signals and converts received RS-232 levels back into logic-level voltages. In the interface hierarchy, the MAX211CDB belongs to the RS-232 transceiver, interface IC, and semiconductor categories. Its four-driver and five-receiver arrangement supports multiport communications equipment while providing three driver channels in shutdown for applications requiring partial low-power operation. Key features include four drivers, five receivers, a 120 kbit/s operating rate, ±9 V driver output swing, ±15 kV ESD protection, and low supply current in shutdown. The integrated charge-pump circuitry supports single-supply operation. These characteristics make the device suitable for computers, industrial controllers, data-acquisition equipment, and other systems that exchange serial data over longer cable runs than TTL or CMOS interfaces can reliably support. The RS-232 electrical interface uses unbalanced, single-ended signaling with a large voltage range relative to common-mode noise. The MAX211CDB is designed for TIA/EIA-232-F and ITU V.28 operation, as stated in the retrieved manufacturer-material summary. Its receiver and driver circuitry provide the voltage translation required at the boundary between digital logic and the RS-232 cable interface. The integrated ESD protection is particularly valuable when an exposed connector receives cable transients. Typical uses include four-wire RS-232 links, multi-channel serial adapters, test equipment, and embedded systems that retain legacy peripheral connections. In a complete interface, the controller UART connects to TTL-level driver inputs, while each driver output feeds an external connector through the application’s protection and routing network. Receivers return cable signals to the UART through external resistor networks when the selected pinout calls for them. Designers should confirm the exact DB package pinout and external charge-pump capacitor values from the manufacturer datasheet. Decoupling capacitors must be placed close to the supply pins, and cable-side routing should minimize exposed stubs. External protection, series resistance, and connector grounding should be selected with the target ESD, surge, and cable-length requirements in mind. This page consolidates verified manufacturer and distributor information, package details, RS-232 design considerations, and drop-in alternatives into an engineering-focused selection resource. It also distinguishes verified specifications from parameters that still require confirmation from the current manufacturer datasheet.

Permintaan RFG Kontak
MAX211CDBR - 120 kbit/s 4/5 RS-232 Transceiver | Texas Instruments (Tape & Reel)
MAX211CDBR

MAX211CDBR - 120 kbit/s 4/5 RS-232 Transceiver | Texas Instruments (Tape & Reel)

The Texas Instruments MAX211CDBR is a 5 V multichannel RS-232 line driver and receiver with four drivers, five receivers, operation up to 120 kbit/s, and ±15 kV human-body-model ESD protection on the bus pins. It is packaged in a 28-pin SSOP. According to the Texas Instruments product page, its driver outputs swing to ±9 V, allowing it to meet the voltage requirements of RS-232 systems operating from one 5 V supply. An RS-232 transceiver is an interface IC that converts logic-level signals into differential, voltage-swinged serial signals and converts received RS-232 levels back into logic-level voltages. In the interface hierarchy, the MAX211CDBR belongs to the RS-232 transceiver, interface IC, and semiconductor categories. Its four-driver and five-receiver arrangement supports multiport communications equipment while providing three driver channels in shutdown for applications requiring partial low-power operation. Key features include four drivers, five receivers, a 120 kbit/s operating rate, ±9 V driver output swing, ±15 kV ESD protection, and low supply current in shutdown. The integrated charge-pump circuitry supports single-supply operation. These characteristics make the device suitable for computers, industrial controllers, data-acquisition equipment, and other systems that exchange serial data over longer cable runs than TTL or CMOS interfaces can reliably support. The RS-232 electrical interface uses unbalanced, single-ended signaling with a large voltage range relative to common-mode noise. The MAX211CDBR is designed for TIA/EIA-232-F and ITU V.28 operation, as stated in the retrieved manufacturer-material summary. Its receiver and driver circuitry provide the voltage translation required at the boundary between digital logic and the RS-232 cable interface. The integrated ESD protection is particularly valuable when an exposed connector receives cable transients. Typical uses include four-wire RS-232 links, multi-channel serial adapters, test equipment, and embedded systems that retain legacy peripheral connections. In a complete interface, the controller UART connects to TTL-level driver inputs, while each driver output feeds an external connector through the application’s protection and routing network. Receivers return cable signals to the UART through external resistor networks when the selected pinout calls for them. Designers should confirm the exact DB package pinout and external charge-pump capacitor values from the manufacturer datasheet. Decoupling capacitors must be placed close to the supply pins, and cable-side routing should minimize exposed stubs. External protection, series resistance, and connector grounding should be selected with the target ESD, surge, and cable-length requirements in mind. This page consolidates verified manufacturer and distributor information, package details, RS-232 design considerations, and drop-in alternatives into an engineering-focused selection resource. It also distinguishes verified specifications from parameters that still require confirmation from the current manufacturer datasheet.

Permintaan RFG Kontak
MAX211CDW - 5V 4/5 RS-232 Transceiver | Texas Instruments
MAX211CDW

MAX211CDW - 5V 4/5 RS-232 Transceiver | Texas Instruments

The Texas Instruments MAX211CDW is a 5 V multichannel RS-232 line driver and receiver with four drivers, five receivers, ±9 V output levels, ±15 kV ESD protection, and operation up to 120 kbit/s in a 28-pin SOIC package. It provides the electrical interface between an asynchronous communication controller and a serial-port connector. An RS-232 transceiver is an interface IC that combines logic-level driver and receiver circuits with the voltage levels required by the TIA/EIA-232-F and ITU V.28 serial-interface standards. These devices translate low-voltage digital signals into bipolar RS-232 levels at the transmitter and convert received bipolar signals back into logic levels. The MAX211CDW also includes a dual charge-pump circuit for generating the required positive and negative voltage rails. Key features include four RS-232 drivers, five RS-232 receivers, a single 5 V supply, ±15 kV ESD protection on serial-port connection pins, and a maximum data rate of 120 kbit/s. The five receivers provide more receive channels than the four transmit channels, allowing additional modem-control or handshake signals to be monitored without requiring separate receiver circuitry. The MAX211CDW uses a dual charge-pump architecture together with four small external capacitors to produce the bipolar voltage levels required by an RS-232 link. According to the manufacturer product information, the device provides pin-to-pin ESD protection across the serial-port connection pins, including ground, and meets the electrical requirements of TIA/EIA-232-F. These characteristics make the IC appropriate for legacy and industrial asynchronous serial interfaces. Typical applications include industrial equipment controllers, data-acquisition systems, instrument interfaces, point-of-sale equipment, and RS-232 ports on embedded systems. The integrated protection is particularly useful where cables connect to external equipment through long or exposed routes, while the 120 kbit/s rate supports common asynchronous serial protocols and simple command exchanges. Designers should place the charge-pump capacitors close to their associated pins, maintain the recommended external-capacitor values, and provide adequate PCB ground connectivity. Decoupling near VCC is also important because the charge pump and switching elements can return ripple to the supply rail. A clean layout helps preserve signal integrity and makes the protection circuitry more effective. This page consolidates verified manufacturer and distributor information, identifies same-family drop-in candidates, and adds practical placement guidance, comparison parameters, and application-specific selection criteria that are not presented as a single block in the manufacturer datasheet.

Permintaan RFG Kontak
MAX211CDWG4 - 4/5 RS-232 Transceiver, 120kbps | Texas Instruments
MAX211CDWG4

MAX211CDWG4 - 4/5 RS-232 Transceiver, 120kbps | Texas Instruments

Texas Instruments MAX211CDWG4 is a 5 V multichannel RS-232 line driver and receiver with four drivers, five receivers, operation to 120 kbit/s, and a 28-pin SOIC package. It operates from a 4.5 V to 5.5 V supply and is specified for the commercial temperature range of 0°C to +70°C. An RS-232 transceiver is an interface IC that combines voltage-conversion line drivers and receivers with a logic-level UART interface. The MAX211 family belongs to the hierarchy RS-232 transceiver → serial interface IC → interface IC → semiconductor. By converting between logic-level signals and RS-232 levels, it enables equipment with a serial UART port to communicate with peripherals, computers, industrial controllers, and other equipment using the TIA/EIA-232-F electrical interface. Four driver channels support bidirectional serial links, while the five receiver channels provide additional receive capability. The MAX211CDWG4 operates to 120 kbit/s, making it suitable for moderate-speed data links rather than high-speed differential communications. Its 5 V supply operation is compatible with conventional 5 V logic systems, although the interface voltage levels remain RS-232 bipolar signals rather than CMOS levels. The device provides ±15 kV HBM ESD protection on its RS-232 pins and meets or exceeds TIA/EIA-232-F and ITU V.28 requirements. Shutdown operation reduces supply current to a typical 1 µA, which helps conserve power when the interface is inactive. These protections and shutdown characteristics are important in industrial and commercial environments where cables can be exposed to electrostatic discharge or where predictable low-power operation is required. Typical applications include RS-232 ports on industrial controllers, test equipment, data-acquisition systems, point-of-sale equipment, and embedded serial interfaces. The 28-pin SOIC package also supports conventional surface-mount assembly. Designers should account for RS-232's unbalanced signaling, cable-length limitations, ground-reference issues, and the need for suitable interface protection when connecting the device to external equipment. Place the device close enough to the connector to minimize the unprotected length of the RS-232 traces. Use the pin-description table in the manufacturer datasheet when assigning signals and decoupling pins. If the system also uses RS-485, RS-422, or USB, select the corresponding interface IC rather than treating an RS-232 transceiver as a universal serial-port solution. This page combines device specifications, replacement guidance, pin and application considerations, and parameter-level comparisons to support engineering selection and PCB implementation. Use the Request a Quote form for current commercial availability, lead time, and sourcing support.

Permintaan RFG Kontak
MAX211CDWR - 5V 4/5 RS-232 Transceiver | Texas Instruments (Tape & Reel)
MAX211CDWR

MAX211CDWR - 5V 4/5 RS-232 Transceiver | Texas Instruments (Tape & Reel)

The Texas Instruments MAX211CDWR is a 5 V multichannel RS-232 line driver and receiver with four drivers, five receivers, ±9 V output levels, ±15 kV ESD protection, and operation up to 120 kbit/s in a 28-pin SOIC package. It provides the electrical interface between an asynchronous communication controller and a serial-port connector. An RS-232 transceiver is an interface IC that combines logic-level driver and receiver circuits with the voltage levels required by the TIA/EIA-232-F and ITU V.28 serial-interface standards. These devices translate low-voltage digital signals into bipolar RS-232 levels at the transmitter and convert received bipolar signals back into logic levels. The MAX211CDWR also includes a dual charge-pump circuit for generating the required positive and negative voltage rails. Key features include four RS-232 drivers, five RS-232 receivers, a single 5 V supply, ±15 kV ESD protection on serial-port connection pins, and a maximum data rate of 120 kbit/s. The five receivers provide more receive channels than the four transmit channels, allowing additional modem-control or handshake signals to be monitored without requiring separate receiver circuitry. The MAX211CDWR uses a dual charge-pump architecture together with four small external capacitors to produce the bipolar voltage levels required by an RS-232 link. According to the manufacturer product information, the device provides pin-to-pin ESD protection across the serial-port connection pins, including ground, and meets the electrical requirements of TIA/EIA-232-F. These characteristics make the IC appropriate for legacy and industrial asynchronous serial interfaces. Typical applications include industrial equipment controllers, data-acquisition systems, instrument interfaces, point-of-sale equipment, and RS-232 ports on embedded systems. The integrated protection is particularly useful where cables connect to external equipment through long or exposed routes, while the 120 kbit/s rate supports common asynchronous serial protocols and simple command exchanges. Designers should place the charge-pump capacitors close to their associated pins, maintain the recommended external-capacitor values, and provide adequate PCB ground connectivity. Decoupling near VCC is also important because the charge pump and switching elements can return ripple to the supply rail. A clean layout helps preserve signal integrity and makes the protection circuitry more effective. This page consolidates verified manufacturer and distributor information, identifies same-family drop-in candidates, and adds practical placement guidance, comparison parameters, and application-specific selection criteria that are not presented as a single block in the manufacturer datasheet.

Permintaan RFG Kontak
MAX211CWI+ - 4/5 RS-232 Transceiver | Analog Devices
MAX211CWI+

MAX211CWI+ - 4/5 RS-232 Transceiver | Analog Devices

The Analog Devices MAX211CWI+ is a single-supply RS-232 and V.28 transceiver with four drivers, five receivers, integrated charge-pump circuitry, and a 28-pin wide SOIC package. It operates from 4.5V to 5.5V and supports data rates in excess of 120kbps. The device uses 0.1uF external charge-pump capacitors, while its drivers maintain the ±5V EIA/TIA-232E output levels specified for loaded operation. An RS-232 transceiver is an interface IC that converts between single-ended logic signals and the bipolar voltage levels used by RS-232 links. In the signal hierarchy, MAX211CWI+ belongs to interface ICs and uses driver and receiver sections to connect digital equipment across a serial cable. Its integrated charge pump doubles the supply and inverts it to produce positive and negative transmitter voltages from one +5V input. The principal feature is its four-driver, five-receiver arrangement, which suits equipment with several serial ports, control signals, or status lines. The MAX211 family is specified for data rates above 120kbps and uses four external 0.1uF capacitors for charge-pump operation. The wide SOIC package provides a leaded surface-mount format while keeping the board footprint compatible with the MAX211 family variants identified in the supplied references. The MAX211CWI+ is intended for +5V systems that need RS-232 drivers and receivers rather than RS-422 or RS-485 differential signaling. It can be used in data acquisition, industrial control, test equipment, and embedded serial ports. Because RS-232 is a single-ended, unbalanced interface, cable routing, grounding, and protection against transients remain important system-level considerations. A key design consideration is that the external charge-pump capacitors must be placed close to the device and selected according to the manufacturer guidance. The receiving logic threshold and driver output levels should be checked against the connected equipment, especially when cables are long or the link includes unprotected industrial wiring. The supplied data does not provide a full electrical limit table, so values not explicitly stated there are marked as data needed rather than inferred. This page combines the verified manufacturer and distributor product information with a cautious selection guide, package-aware comparison, and practical integration notes. It distinguishes confirmed MAX211 family details from parameters that require the complete manufacturer datasheet before design release.

Permintaan RFG Kontak
MAX211EAI+ - 120kbps 4/5 RS-232 Transceiver | Analog Devices
MAX211EAI+

MAX211EAI+ - 120kbps 4/5 RS-232 Transceiver | Analog Devices

The Analog Devices MAX211EAI+ is a +5 V RS-232 and V.28 transceiver with four line drivers, five line receivers, and integrated charge-pump circuitry in a 28-pin SSOP package. It supports data rates up to 120 kbps and uses four 0.1 uF external capacitors. The device provides the electrical interface between an asynchronous communication controller and an RS-232 serial-port connector. An RS-232 transceiver is an interface IC that converts logic-level signals between a host controller and a cable-based serial link. The MAX211 family combines drivers, receivers, and voltage-conversion circuitry into a single interface device. It belongs to the interface IC hierarchy and allows a +5 V system to communicate through RS-232 without requiring separate negative supply rails or external line-driver ICs. The MAX211EAI+ supports EIA/TIA-232E and CCITT V.28 operation at data rates up to 120 kbps when loaded according to the cited standards. Its four drivers maintain approximately plus or minus 5 V EIA/TIA-232E output levels, while the five receivers support the logic-side receive function. Four external 0.1 uF charge-pump capacitors allow operation from a single +5 V supply. The integrated dual charge-pump architecture generates the voltage required by the RS-232 line drivers and reduces the number of external supply rails required by the design. The MAX211EAI+ is packaged in the 28-pin SSOP package, identified as EAI in the ordering code. This package provides a compact option for industrial and communication equipment where board area is constrained but a conventional through-hole RS-232 package is unnecessary. Typical uses include industrial serial controllers, instrumentation, POS terminals, data-acquisition equipment, and embedded systems that require a +5 V RS-232 port. The 120 kbps capability is suitable for moderate-speed asynchronous serial communication, while the integrated drivers and receivers reduce the component count compared with separate transmitter and receiver devices. PCB design must reserve the four specified 0.1 uF capacitors and maintain the charge-pump routing recommended by the manufacturer datasheet. Keep high-current charge-pump loops compact, provide an uninterrupted ground plane, and place interface protection close to the connector because external cables can introduce ESD and surge events. This page combines verified manufacturer information, distributor availability, family-level drop-in guidance, package details, and practical PCB design considerations to help engineers evaluate the MAX211EAI+ for compact +5 V RS-232 interface designs.

Permintaan RFG Kontak
MAX211EEAI+ 4/5 RS-232 Transceiver | Analog Devices
MAX211EEAI+

MAX211EEAI+ 4/5 RS-232 Transceiver | Analog Devices

Analog Devices MAX211EEAI+ is a four-driver, five-receiver RS-232 and V.28 transceiver with an integrated charge pump for operation from a single +5 V supply. It supports data rates in excess of 120 kbps, provides ±15 kV ESD protection on the RS-232 interface, and is packaged in a 28-pin SSOP. The MAX211 family is designed for bidirectional serial communication systems that require TTL/CMOS logic interfacing, compliant ±5 V RS-232 signal levels, and enhanced electrostatic protection. An RS-232 transceiver is an interface IC that converts between single-ended TTL or CMOS logic levels and differential, bipolar RS-232 signals. In the broader semiconductor hierarchy, the MAX211EEAI+ belongs to the interface IC family, combining line drivers, line receivers, and charge-pump voltage generation in one device. This integration allows a host controller or UART to connect to a cable-based RS-232 port without external level-shifting transistors or a separate negative supply rail. The device includes four TTL-compatible transmitters and five receivers. The transmitters produce the ±5 V output levels required by EIA/TIA-232E, while the receivers convert incoming RS-232 signals into logic-compatible levels. Its integrated charge-pump circuitry generates the positive and negative voltages required by the RS-232 drivers from one +5 V supply. The MAX211EEAI+ also supports data rates above 120 kbps when operated in accordance with the EIA/TIA-232E loading requirements. A major feature of the MAX211EEAI+ is its ±15 kV human-body-model ESD protection, which improves interface robustness in environments where cables may be connected or disconnected. The receive and transmit sections provide practical channel counts for systems requiring several serial links, status inputs, control signals, or bidirectional communication through one RS-232 connector. Its 28-pin SSOP package offers a compact surface-mount footprint compared with the larger 28-pin wide SO option also offered in the MAX211 family. Typical uses include industrial equipment interfaces, data-acquisition systems, instrumentation, service consoles, embedded serial adapters, and legacy peripheral connectivity. The device is especially useful when an embedded controller must communicate through a multi-channel RS-232 interface while maintaining a single +5 V power architecture. Because it is a bipolar RS-232 interface rather than a modern differential bus transceiver, it is best suited to point-to-point cable links and compatible equipment rather than long-distance, high-noise industrial Ethernet-style networks. Designers should provide the charge-pump capacitors specified by the manufacturer, connect unused inputs to defined logic levels, and treat the ESD-protected RS-232 pins as external connector pins. Keep the interface ground reference connected with the signal cable, route the interface connector and cable away from sensitive analog signals, and validate the complete board under the grounding conditions of the target system. This page combines the manufacturer specifications, package details, application guidance, comparison information, and verified drop-in candidates for engineers evaluating the MAX211EEAI+. It also highlights practical distinctions among confirmed SSOP-28 alternatives so PCB reuse can be assessed without confusing a package-compatible device with an electrically equivalent but differently pinned part.

Permintaan RFG Kontak
MAX211EEWI+ - 15kV ESD 4/5 RS-232 Transceiver | Maxim
MAX211EEWI+

MAX211EEWI+ - 15kV ESD 4/5 RS-232 Transceiver | Maxim

The Maxim Integrated MAX211EEWI+ is a 4/5 RS-232 transceiver with four drivers and five receivers, 15kV ESD protection, and single-supply operation from 4.5V to 5.5V. The device is offered in a 28-pin wide small-outline SOIC package and includes an integrated charge pump for single 5V operation. An RS-232 transceiver is an interface IC that converts logic-level signals to and from RS-232 line levels. It belongs to the transceiver class, interface IC hierarchy, and broader semiconductor category. The MAX211EEWI+ combines four driver channels with five receiver channels, allowing multiple serial ports or asymmetric communication paths to share one package while providing a standardized physical interface for data transmission. Key features include 15kV ESD protection, TTL-compatible tri-state driver operation, and operation from a 4.5V to 5.5V supply. The integrated charge pump eliminates the need for a separate external charge-pump supply arrangement for standard single-supply RS-232 operation. Its four-driver and five-receiver organization also provides receiver headroom when a system requires more receive channels than transmit channels. The E suffix identifies the electrically enhanced device family, while the wider temperature capability associated with the EWI+ ordering code is -40°C to +85°C. The MAX211 family is also offered in 28-pin wide SO and SSOP configurations, but the target ordering code uses the 28-pin wide SOIC package. Exact propagation delay, slew rate, receiver thresholds, and input capacitance should be confirmed against the manufacturer datasheet before finalizing a high-speed interface design. Typical uses include industrial serial-port equipment, data acquisition systems, instrumentation, control panels, and embedded systems that connect TTL or CMOS logic to RS-232 equipment. The five-receiver, four-driver arrangement is particularly useful where more input channels are required than output channels. Integrating the charge pump also reduces external circuitry and simplifies single-rail implementation compared with charge-pump-free or externally assisted alternatives. Designers should verify signal-level compatibility, grounding, connector selection, and cable length for the selected RS-232 standard. ESD protection is valuable at the connector interface, but external protection may still be needed for severe industrial surge environments. Keep ground and signal routing controlled, place the charge-pump capacitors close to their specified pins, and avoid using TTL outputs without first confirming the required driver-enable and tri-state behavior. This page combines the Maxim family specifications, verified distributor listings, pin-compatible family alternatives, and application-focused engineering guidance to support component selection and PCB design planning.

Permintaan RFG Kontak
MAX211EWI+ - 4/5 RS-232 Transceiver, 5V, 120kbps | ADI
MAX211EWI+

MAX211EWI+ - 4/5 RS-232 Transceiver, 5V, 120kbps | ADI

The Analog Devices MAX211EWI+ is a four-driver, five-receiver RS-232 and V.28 transceiver designed for single +5 V supply operation. It supports data rates in excess of 120 kbps, maintains ±5 V EIA/TIA-232E driver output levels, and uses an integrated charge pump to generate the bipolar voltages required by RS-232. The device is supplied in a 28-pin wide SOIC package and requires four external 0.1 µF capacitors for charge-pump operation. An RS-232 transceiver is an interface IC that converts logic-level signals between a host or controller and a cable-based RS-232 link. Within the interface hierarchy, the MAX211EWI+ combines a charge-pump voltage converter, RS-232 line drivers, and line receivers into one mixed-signal device. This integration allows a single +5 V system to communicate with legacy RS-232 equipment without a separate negative supply or external RS-232 line-power circuit. Key features include four RS-232 drivers, five receivers, operation above 120 kbps, integrated charge-pump circuitry, and single-supply operation from a nominal +5 V rail. The four external 0.1 µF capacitors required by the EWI+ variant simplify voltage generation but must be placed close to their designated pins to limit charge-pump switching noise. The device provides ±5 V driver levels while operating from a 5 V supply, matching the classic RS-232 electrical requirement for bipolar signaling. The MAX211 architecture divides the transceiver into a charge-pump converter, four driver channels, and five receiver channels. Its integrated charge pump generates the positive and negative rail voltages used by the drivers. Because these rails are switched internally, PCB layout and capacitor placement materially affect radiated and conducted noise. The wide SOIC outline offers adequate lead spacing for through-hole assembly while occupying less area than a 28-pin standard SOIC. Typical applications include industrial serial controllers, test equipment, point-of-sale terminals, instrumentation, and data-acquisition systems. Five receiver channels allow one port to monitor four incoming RS-232 lines while the fourth transmitter drives a separate link, making the device useful for console and diagnostic interfaces. The 120 kbps-plus capability is appropriate for configuration links and moderate-rate data transfers rather than modern high-speed serial protocols. Designers should treat the external charge-pump capacitors and signal routing as critical layout elements. Keep the four 0.1 µF capacitors adjacent to their charge-pump pins, route the charge-pump output as a short and quiet net, and provide adequate bypass capacitance on the +5 V supply. Because the MAX211EWI+ is a legacy RS-232 interface rather than an EIA/TIA-422 or RS-485 transceiver, cable length, grounding, and protection-network design remain application-specific responsibilities. This page combines manufacturer specifications, distributor references, drop-in family alternatives, and application-focused design guidance. It highlights the practical differences between temperature and packaging order codes and identifies the verification gaps that must be closed before a PCB redesign or cross-brand substitution is approved.

Permintaan RFG Kontak
MAX211IDB - 5V RS-232 Transceiver, 120kbps, ±15kV ESD | TI
MAX211IDB

MAX211IDB - 5V RS-232 Transceiver, 120kbps, ±15kV ESD | TI

The Texas Instruments MAX211IDB is a 5-V multichannel RS-232 line driver/receiver with ±15 kV ESD protection, packaged in a 28-pin SSOP (DB). The device integrates four line drivers, five line receivers, and a dual charge-pump circuit, supports data rates up to 120 kbps, and provides ±9 V output swing for compliant TIA/EIA-232-F signaling. What is an RS-232 line driver/receiver? An RS-232 transceiver is an interface IC that translates between the low-voltage logic levels used by a UART or microcontroller (typically 0 V to 5 V or 3.3 V) and the higher-voltage bipolar signaling levels required by the legacy TIA/EIA-232-F standard (±5 V to ±15 V). It belongs to the broader family of line transceivers (interface ICs > drivers, receivers, transceivers) and acts as the electrical translator between an asynchronous communication controller and a DB-9 or DB-25 serial-port connector. The on-chip charge pump generates the bipolar rails from a single 5 V supply, eliminating the need for external ±12 V power. Key features of the MAX211IDB include integrated dual charge pump with four external 0.1 µF capacitors, ±15 kV ESD protection on serial-port connection pins (Human-Body Model per TIA/EIA-232-F requirements), four drivers and five receivers, true TTL/CMOS input compatibility on receiver inputs, and a low 1.5 mA typical supply current. The device operates from a single 5 V supply and requires no external ±12 V rails, simplifying industrial and embedded designs. Internally the MAX211IDB uses a switched-capacitor voltage converter (charge pump) to derive +10 V and -10 V from the 5 V input. These rails feed the drivers, allowing them to swing beyond the supply rails per RS-232 specifications. The drivers are inverting (true RS-232 inverters), while the receivers invert again so overall the data path is non-inverting between the UART TX/RX lines and the cable-side DTR/DSR/RTS/CTS/RI/DCD lines. Typical applications include industrial PCs and point-of-sale terminals, serial-port debug consoles on embedded systems, legacy modem interfaces, factory automation controllers, and any system requiring TIA/EIA-232-F signaling from a single 5 V rail. When designing with this part, place the four charge-pump capacitors as close to the IC pins as possible and provide adequate ground plane beneath the SSOP-28 body to keep EMI and supply ripple low.

Permintaan RFG Kontak
MAX211IDBR - 5V RS-232 Transceiver, 120kbps, ±15kV ESD | TI (Tape & Reel)
MAX211IDBR

MAX211IDBR - 5V RS-232 Transceiver, 120kbps, ±15kV ESD | TI (Tape & Reel)

The Texas Instruments MAX211IDBR is a 5-V multichannel RS-232 line driver/receiver with ±15 kV ESD protection, packaged in a 28-pin SSOP (DB). The device integrates four line drivers, five line receivers, and a dual charge-pump circuit, supports data rates up to 120 kbps, and provides ±9 V output swing for compliant TIA/EIA-232-F signaling. What is an RS-232 line driver/receiver? An RS-232 transceiver is an interface IC that translates between the low-voltage logic levels used by a UART or microcontroller (typically 0 V to 5 V or 3.3 V) and the higher-voltage bipolar signaling levels required by the legacy TIA/EIA-232-F standard (±5 V to ±15 V). It belongs to the broader family of line transceivers (interface ICs > drivers, receivers, transceivers) and acts as the electrical translator between an asynchronous communication controller and a DB-9 or DB-25 serial-port connector. The on-chip charge pump generates the bipolar rails from a single 5 V supply, eliminating the need for external ±12 V power. Key features of the MAX211IDBR include integrated dual charge pump with four external 0.1 µF capacitors, ±15 kV ESD protection on serial-port connection pins (Human-Body Model per TIA/EIA-232-F requirements), four drivers and five receivers, true TTL/CMOS input compatibility on receiver inputs, and a low 1.5 mA typical supply current. The device operates from a single 5 V supply and requires no external ±12 V rails, simplifying industrial and embedded designs. Internally the MAX211IDBR uses a switched-capacitor voltage converter (charge pump) to derive +10 V and -10 V from the 5 V input. These rails feed the drivers, allowing them to swing beyond the supply rails per RS-232 specifications. The drivers are inverting (true RS-232 inverters), while the receivers invert again so overall the data path is non-inverting between the UART TX/RX lines and the cable-side DTR/DSR/RTS/CTS/RI/DCD lines. Typical applications include industrial PCs and point-of-sale terminals, serial-port debug consoles on embedded systems, legacy modem interfaces, factory automation controllers, and any system requiring TIA/EIA-232-F signaling from a single 5 V rail. When designing with this part, place the four charge-pump capacitors as close to the IC pins as possible and provide adequate ground plane beneath the SSOP-28 body to keep EMI and supply ripple low.

Permintaan RFG Kontak
MAX211IDBRE4 - 5V RS-232 Transceiver | Texas Instruments
MAX211IDBRE4

MAX211IDBRE4 - 5V RS-232 Transceiver | Texas Instruments

Texas Instruments MAX211IDBRE4 is a 5 V multichannel RS-232 line driver/receiver with four drivers, five receivers, operation to 120 kbit/s, and ±15 kV human-body-model ESD protection in a 28-pin SSOP package. The device operates from a 4.5 V to 5.5 V supply over a -40°C to +85°C temperature range and includes a low-power shutdown mode. An RS-232 transceiver is an interface IC that converts low-voltage digital signals into RS-232 levels and converts incoming RS-232 signals back into logic-compatible levels. It belongs to the hierarchy of RS-232 interface transceivers, multi-channel line drivers and receivers, interface ICs, and semiconductors. Such devices simplify bidirectional serial connectivity between equipment such as industrial controllers, test equipment, and legacy computer peripherals. The MAX211IDBRE4 combines four line drivers with five receivers, allowing four outputs and five inputs to share one interface package. Its maximum data rate of 120 kbit/s suits legacy serial ports and control links. Input receiver hysteresis of 500 mV improves noise immunity, while ±15 kV HBM protection improves tolerance of electrostatic discharge on serial-port connections. The specified 5 V operation is compatible with conventional 5 V digital systems. Internally, the receiver side uses Schmitt-trigger inputs, which provide hysteresis between the low and high switching thresholds. This helps prevent repeated switching as a noisy input crosses the transition region. The integrated driver and receiver functions support asymmetric channel counts, while the shutdown circuit reduces supply current to 1 µA typical when the interface is not active. These characteristics make the device useful where several RS-232 ports must share a common logic-side supply. Typical applications include multiport industrial controllers, programmable logic controller communications, test and measurement equipment, instrument-control interfaces, and legacy peripheral connections. The 28-pin SSOP surface-mount package also allows reuse of an existing MAX211-family circuit footprint without changing to a through-hole package. Design the circuit with short, appropriately terminated RS-232 routes, maintain the specified 4.5 V to 5.5 V supply range, and account for ground potential differences between connected equipment. Use the manufacturer pin-description table and application guidance when assigning connector-side and logic-side signals. Verify shutdown-state behavior and ESD requirements at the complete system level. This page combines the MAX211IDBRE4 electrical specifications, package details, RS-232 design guidance, comparison parameters, and qualified drop-in alternatives to support faster component selection and PCB-level replacement decisions.

Permintaan RFG Kontak
MAX211IDBRG4 - 5V 120kbps RS-232 Transceiver | TI
MAX211IDBRG4

MAX211IDBRG4 - 5V 120kbps RS-232 Transceiver | TI

Texas Instruments MAX211IDBRG4 is a 5V multichannel RS-232 line driver and receiver with four drivers, five receivers, 120 kbit/s operation, and ±15 kV ESD protection, packaged in a 28-pin SSOP. It provides the electrical interface between an asynchronous communication controller and an RS-232 serial connector. An RS-232 transceiver is an interface IC that converts logic-level UART signals into RS-232 differential voltage levels and converts received RS-232 signals back into logic-compatible levels. This signal-conditioning layer sits between a serial communication controller and an external connector. The MAX211 belongs to the broader RS-232 interface, transceiver, interface IC, and semiconductor hierarchy. Its integrated dual charge pump generates the positive and negative voltage levels required by RS-232 while allowing operation from a single 5V supply. The device includes four RS-232 drivers, five RS-232 receivers, and pin-to-pin ESD protection rated at ±15 kV using the human-body model. It operates at up to 120 kbit/s and meets the requirements of TIA/EIA-232-F and ITU V.28, as identified in the manufacturer datasheet. An enable control supports low-power shutdown, while the low shutdown supply current helps suit equipment where the serial interface is not continuously active. The dual charge-pump architecture is a key technical feature. Four small external capacitors support the charge-pump circuit, allowing the interface to produce the bipolar voltage swings needed for RS-232 communication. The four-driver and five-receiver arrangement supports applications requiring more receive channels than transmit channels, while the shared 5V supply simplifies interface implementation in industrial-control, test, and embedded systems. Typical uses include multi-channel RS-232 port expansion, industrial data acquisition, service and configuration interfaces, legacy peripheral connectivity, and embedded control systems that retain a serial console. The industrial temperature range of −40°C to +85°C supports use across commercial and industrial environments where temperature variation is expected. PCB design should preserve short charge-pump capacitor connections and provide adequate input and output return paths for every RS-232 channel. Place ESD-protection and signal-routing structures near the connector when the external cable creates a direct electrostatic-discharge path. Confirm signal polarity, receiver direction, enable state, and connector mapping before releasing a new layout. This page combines the manufacturer’s electrical specifications, verified drop-in replacement information, application guidance, package details, and practical layout considerations to accelerate component selection and PCB implementation.

Permintaan RFG Kontak
MAX211IDW - 5V 120kbps RS-232 Transceiver | Texas Instruments
MAX211IDW

MAX211IDW - 5V 120kbps RS-232 Transceiver | Texas Instruments

Texas Instruments MAX211IDW is a 5 V multichannel RS-232 line driver and receiver with four drivers, five receivers, and ±15 kV ESD protection, packaged in a 28-pin SOIC. It supports data rates up to 120 kbit/s and operates across the industrial -40°C to +85°C temperature range. An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 line levels and converts received line-level signals back into digital logic. Within the interface hierarchy, MAX211IDW is a multichannel RS-232 transceiver built around four RS-232 line drivers, five line receivers, and a dual charge-pump circuit. This topology allows multiple serial channels to share one supply while providing bipolar voltage generation for the driver outputs. Key features include a 5 V supply, operation to 120 kbit/s, four line drivers, five line receivers, and ±15 kV ESD protection across the serial-port connection pins, including ground. The device is designed to meet the requirements of TIA/EIA-232-F and ITU V.28. Its additional fifth receiver provides flexibility for monitoring a modem handshake signal when the four main driver and receiver channels are already assigned. The MAX211 architecture uses a dual charge-pump circuit to generate the positive and negative voltages required by RS-232 drivers. Four small external capacitors support charge-pump operation. The resulting interface can place a communication controller on the logic side and a DB9 or other RS-232 connector on the line side without requiring discrete level-shifting circuits. Pin-to-pin ESD protection extends robustness across exposed serial-port connections. Typical uses include industrial serial-port adapters, data-acquisition equipment, POS terminals, service interfaces, and legacy computer peripherals. The 120 kbit/s operating rate supports moderate-speed asynchronous communication, while the four-driver and five-receiver arrangement is useful for systems requiring several handshake or control lines. The -40°C to +85°C range also suits industrial environments where commercial-temperature interface ICs may be insufficient. Designers should use the manufacturer's charge-pump capacitor and bypass-capacitor recommendations, place the external capacitors close to their pins, and keep sensitive logic and communications routing separated from exposed connector and ESD paths. The device is marked last-time-buy by a verified distributor listing, so new designs should confirm availability and consider a supported modern interface before committing to a large production run. This page combines verified manufacturer and distributor information with lifecycle context, drop-in alternatives, comparison parameters, and practical interface-design guidance. It highlights where MAX211IDW remains suitable for multichannel RS-232 and where supply availability or newer USB-to-serial solutions may be more appropriate.

Permintaan RFG Kontak
MAX211IDWR - 5V 120kbps RS-232 Transceiver | Texas Instruments (Tape & Reel)
MAX211IDWR

MAX211IDWR - 5V 120kbps RS-232 Transceiver | Texas Instruments (Tape & Reel)

Texas Instruments MAX211IDWR is a 5 V multichannel RS-232 line driver and receiver with four drivers, five receivers, and ±15 kV ESD protection, packaged in a 28-pin SOIC. It supports data rates up to 120 kbit/s and operates across the industrial -40°C to +85°C temperature range. An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 line levels and converts received line-level signals back into digital logic. Within the interface hierarchy, MAX211IDWR is a multichannel RS-232 transceiver built around four RS-232 line drivers, five line receivers, and a dual charge-pump circuit. This topology allows multiple serial channels to share one supply while providing bipolar voltage generation for the driver outputs. Key features include a 5 V supply, operation to 120 kbit/s, four line drivers, five line receivers, and ±15 kV ESD protection across the serial-port connection pins, including ground. The device is designed to meet the requirements of TIA/EIA-232-F and ITU V.28. Its additional fifth receiver provides flexibility for monitoring a modem handshake signal when the four main driver and receiver channels are already assigned. The MAX211 architecture uses a dual charge-pump circuit to generate the positive and negative voltages required by RS-232 drivers. Four small external capacitors support charge-pump operation. The resulting interface can place a communication controller on the logic side and a DB9 or other RS-232 connector on the line side without requiring discrete level-shifting circuits. Pin-to-pin ESD protection extends robustness across exposed serial-port connections. Typical uses include industrial serial-port adapters, data-acquisition equipment, POS terminals, service interfaces, and legacy computer peripherals. The 120 kbit/s operating rate supports moderate-speed asynchronous communication, while the four-driver and five-receiver arrangement is useful for systems requiring several handshake or control lines. The -40°C to +85°C range also suits industrial environments where commercial-temperature interface ICs may be insufficient. Designers should use the manufacturer's charge-pump capacitor and bypass-capacitor recommendations, place the external capacitors close to their pins, and keep sensitive logic and communications routing separated from exposed connector and ESD paths. The device is marked last-time-buy by a verified distributor listing, so new designs should confirm availability and consider a supported modern interface before committing to a large production run. This page combines verified manufacturer and distributor information with lifecycle context, drop-in alternatives, comparison parameters, and practical interface-design guidance. It highlights where MAX211IDWR remains suitable for multichannel RS-232 and where supply availability or newer USB-to-serial solutions may be more appropriate.

Permintaan RFG Kontak