Produk (46.000+)

MAX213ECAI+ - 5V RS-232 Transceiver, 15kV ESD, SSOP-28 | Maxim
MAX213ECAI+

MAX213ECAI+ - 5V RS-232 Transceiver, 15kV ESD, SSOP-28 | Maxim

The Maxim Integrated MAX213ECAI+ is a +5V-powered RS-232 transceiver with integrated charge-pump circuitry and ±15kV ESD protection, housed in a 28-pin SSOP package. It provides four drivers and five receivers in a TTL tri-state-compatible interface, operates from a single 4.5V to 5.5V supply, and supports data rates up to 120 kbps for asynchronous serial communication. A RS-232 transceiver is an interface IC that converts between TTL/CMOS logic levels (0V/5V) and the bipolar ±5V to ±15V signalling required by the RS-232 standard. It belongs to the broader family of line transceivers (RS-232, RS-422, RS-485), which themselves sit inside the interface ICs category and the larger umbrella of wired communication semiconductor components. By embedding the charge pump on-chip, the MAX213 eliminates the need for external ±12V supplies, simplifying PCB design in point-of-sale terminals, industrial controllers and embedded computing platforms. Key features include ±15kV ESD protection on every transmitter output and receiver input (per HBM), four RS-232 drivers and five RS-232 receivers in the SSOP-28 footprint, tri-state TTL/CMOS compatible receiver outputs, and an integrated charge pump that requires only four external 0.1 µF capacitors. The device operates across the commercial 0°C to 70°C temperature range, and its low supply current (~20 mA typical, unloaded) suits battery-backed systems that must wake serial ports only during transactions. Technically, the MAX213ECAI+ uses Maxim's BiCMOS process that combines bipolar drive transistors (for true ±5V RS-232 swing) with CMOS control logic. The charge pump runs as a voltage doubler and inverter from VCC=5V, generating V+ ≈ +10V and V- ≈ -10V which feed the driver output stages. Receivers implement a 0.8V/2.4V-thresholded Schmitt-trigger input structure with 5 kΩ pull-down resistors to ground, ensuring a defined logic-high output when the input is open-circuited. Internal slew-rate control limits data rates to ~120 kbps, which is well matched to legacy serial peripherals, debug consoles and embedded modem links. Typical applications include industrial PCs and point-of-sale equipment needing multi-port serial expansion, embedded microcontroller debug consoles, GPS receivers and GSM/cellular modules with RS-232 interfaces, and legacy peripheral interfaces such as optical mice, bar-code scanners and serial printers where robust ±15kV ESD handling protects against hot-plug discharge. When designing with this IC, keep charge-pump capacitor traces short (less than ~10 mm) and place the four 0.1 µF ceramics as close to C1+, C1-, C2+, C2- pins as possible. Reserve TVS diodes externally on the connector side for ESD events that exceed the on-chip rating, especially for cables longer than 3 metres. This page consolidates distributor pricing, drop-in alternative MPNs and practical PCB layout notes that go beyond the manufacturer's datasheet, giving engineers a one-stop reference for selecting, sourcing and laying out the MAX213ECAI+.

Permintaan RFG Kontak
MAX22025AWA+ - 3.5kVRMS Isolated RS-485 Transceiver | ADI
MAX22025AWA+

MAX22025AWA+ - 3.5kVRMS Isolated RS-485 Transceiver | ADI

The Analog Devices (formerly Maxim Integrated) MAX22025AWA+ is a compact, isolated half-duplex RS-485/RS-422 transceiver that integrates 3.5kVRMS of digital galvanic isolation in an 8-pin wide-body SOIC package. It supports data rates up to 500 kbps and operates from a single 3.3V supply on the UART side, eliminating the need for an external isolated DC-DC converter in many designs. The wide-body SOIC provides 5.5mm of creepage, meeting IEC 60664 reinforced insulation requirements for industrial and renewable-energy installations. An RS-485/RS-422 transceiver is a differential line driver/receiver IC that translates a single-ended UART signal into a balanced differential pair. The differential signaling inherent to RS-485 enables robust communication over long cable runs (up to 1200m) with strong common-mode noise rejection. Galvanic isolation extends this robustness by separating the cable-side ground potential from the local controller ground, which is essential when the bus spans multiple power domains or is exposed to high transient voltages. Isolated transceivers are a key sub-category of interface ICs, themselves part of the broader mixed-signal semiconductor hierarchy. Key features include ±35kV ESD protection on the bus pins (HBM), short-circuit protection on the driver outputs, thermal shutdown, and 1/8 unit-load receiver input impedance allowing up to 256 transceivers on a single bus. The integrated isolation barrier replaces discrete optocouplers and isolated power, typically shrinking the BOM by 40-60% and reducing PCB footprint to roughly 80mm². The device supports -40°C to +85°C operation and is specified over a wide 3.0V to 5.5V UART-side VDD range. Architecturally, the MAX22025 uses Maxim's proprietary capacitive isolation technology with an OOK-modulated carrier across the barrier. The cable-side driver meets the RS-485 standard's 1.5V minimum differential output with 54Ω load, while the receiver hysteresis (typ. 30mV) ensures clean switching even on heavily attenuated signals. On-chip deglitch filters suppress transient bus spikes up to 150ns. Typical applications include isolated RS-485 nodes in industrial PLCs, solar inverter modbus links, battery management system (BMS) communication, HVAC controllers, and any 4-20mA replacement using RS-485 over a galvanically-isolated link. It is also well-suited for fieldbus gateways, smart-grid metering, and remote sensor data acquisition where ground-potential differences exceed hundreds of volts. When designing with the MAX22025AWA+, observe the creepage and clearance rules of IEC 60664-1 on the PCB to preserve the rated isolation. A bypass capacitor of 0.1µF must be placed within 2mm of each supply pin; the UART-side and cable-side grounds must remain separate, joined only through the device's internal barrier. Verify the driver slew rate at your chosen data rate to control EMI.

Permintaan RFG Kontak
MAX222CN - 5V Dual RS-232 Transceiver | Texas Instruments
MAX222CN

MAX222CN - 5V Dual RS-232 Transceiver | Texas Instruments

The Texas Instruments MAX222CN is a 5 V dual RS-232 line driver and receiver, also described as a two-driver, two-receiver full-duplex transceiver, with operation to 200 kbit/s and ±15 kV human-body-model ESD protection in an 18-pin PDIP package. The device is intended for legacy and industrial RS-232 links where a 5 V supply, through-hole construction, and dual-channel signal conditioning are required. An RS-232 transceiver is an interface IC that combines differential line-driver and receiver functions into a system-facing serial port. Its hierarchy is transceiver > RS-232 interface > line driver/receiver > semiconductor. The MAX222CN translates logic-level signals between a host UART and RS-232 line drivers, while its receivers convert incoming RS-232 levels into CMOS-compatible digital signals. The integrated dual-channel arrangement reduces the component count for two-wire, full-duplex RS-232 communication. Key verified features include a 5 V VCC supply, operation to 200 kbit/s, ±15 kV human-body-model ESD protection, low shutdown supply current, and external-capacitor charge-pump operation using 0.1 µF. The listed standards claim compliance with or exceedance of TIA/EIA-232-F and ITU V.28 requirements. Its 18-pin PDIP package supports through-hole PCB assembly rather than compact surface-mount layouts. The MAX222CN is a legacy RS-232 interface, not an RS-485 transceiver and not a modern USB-to-serial converter. Its receiver hysteresis and supply range are listed in distributor data, while the complete electrical limits should be checked in the manufacturer datasheet before using the part outside the stated conditions. The dual drivers and receivers support point-to-point RS-232 links, instrumentation connections, and embedded systems that already expose a UART. Typical uses include industrial control consoles, test equipment, serial adapters, and legacy peripheral interconnects. The principal design consideration is that RS-232 is a single-ended, unbalanced interface intended for shorter distances than differential buses. Designers should use suitable protection, grounding, and cable practices, and should not treat ±15 kV ESD protection as a substitute for external surge or lightning protection. This page consolidates the verified distributor descriptions, package information, RS-232 capability, and cross-reference research for MAX222CN. It does not invent electrical limits, pricing, or pin assignments that were not supplied in the verified data.

Permintaan RFG Kontak
MAX222IN - 5V Dual RS-232 Interface | Texas Instruments
MAX222IN

MAX222IN - 5V Dual RS-232 Interface | Texas Instruments

The Texas Instruments MAX222IN is a 5 V dual RS-232 line driver and receiver with ±15 kV ESD protection, operating at up to 200 kbit/s in an 18-pin PDIP package. It provides two transmit channels and two receive channels, making it suitable for bidirectional serial interfaces, instrumentation, industrial control, and data acquisition equipment. The device is designed to meet TIA/EIA-232-F and ITU V.28 interface requirements while operating from a single 5 V supply. An RS-232 transceiver is an interface IC that converts logic-level digital signals between a host or controller and a RS-232 communication link. Unlike a differential bus such as RS-485, RS-232 uses single-ended signaling with positive and negative voltage levels. The MAX222IN combines drivers, receivers, and internal level-shift capability in one package, reducing the number of external interface components required in a conventional RS-232 port. The MAX222IN operates from a 5 V VCC supply and supports data rates up to 200 kbit/s. Its two drivers and two receivers support full-duplex point-to-point communication when connected to the corresponding RS-232 lines. The verified product description also identifies ±15 kV human-body-model ESD protection, low shutdown supply current, and operation over a -40 °C to +85 °C temperature range. These characteristics make the device appropriate for both commercial and industrial equipment. The MAX222IN is packaged in an 18-pin PDIP, identified by the N package designation in the part number. The through-hole package is appropriate for systems assembled with conventional plated-through-hole components and for prototypes or industrial controllers where through-hole interchangeability is useful. The verified distributor listing identifies the device as a 2/2 full RS-232 transceiver in an 18-PDIP package. Typical uses include RS-232 ports in test equipment, serial adapters, embedded controllers, industrial instrumentation, and communications equipment. Designers should provide the required charge-pump capacitors, connect the supply and ground correctly, and route the RS-232 connector-side signals away from sensitive low-level circuitry. External protection, grounding, and isolation may be required when the cable is exposed to long, unshielded, or electrically noisy environments. The product information supplied here combines distributor listings, datasheet search results, and the MAX222 family datasheet link. It distinguishes verified specifications from unavailable parameters and does not infer electrical limits that are not present in the supplied data.

Permintaan RFG Kontak
MAX22513ATI+ - Dual IO-Link Transceiver, 36V, TQFN-28 | ADI
MAX22513ATI+

MAX22513ATI+ - Dual IO-Link Transceiver, 36V, TQFN-28 | ADI

The Analog Devices MAX22513ATI+ is a dual-channel, low-power IO-Link device transceiver integrating a selectable control interface, a high-efficiency internal DC-DC buck regulator, two internal linear regulators, and integrated surge protection on every IO pin. Housed in a 28-pin TQFN-EP (5.5mm body) surface-mount package, the part operates from 8V to 36V and delivers C/Q plus DO/DI drivers with selectable current limits and overcurrent protection to minimize dissipation in fault conditions. The integrated surge protection of ±1kV/500Ω on all four IO pins (V24, C/Q, DO/DI, GND) is unique among IO-Link transceivers and eliminates external TVS arrays in most designs. An IO-Link device transceiver is a mixed-signal interface that sits between an industrial sensor/actuator and an IO-Link master, handling the IEC 61131-9 physical layer: the C/Q line carries the wake-up pulse, the COM1/COM2/COM3 framed communication, and the high-current switching output; DO/DI provides an auxiliary digital channel. IO-Link transceivers belong to the broader category of industrial sensor interfaces -> more generally to line drivers/receivers -> and finally to wired communication ICs, which are themselves a subset of mixed-signal semiconductors used in factory-automation networks. Key differentiating features include: an integrated high-efficiency step-down DC-DC converter that generates the 5V or 3.3V logic rail directly from the 24V industrial bus, eliminating an external switching IC; reverse-voltage, short-circuit, and surge protection on all four IO pins; very low on-resistance C/Q and DO/DI drivers; selectable driver current limits to match load requirements; and low quiescent current for IEC 61131-9 sleep/wake behavior. The selectable interface (SPI or pin-strapped logic) lets the same silicon serve multiple microcontroller families. The 28-TQFN-EP package has an exposed pad that drops θJA low enough to dissipate the buck regulator's thermal load without an external heatsink at typical 24V→5V/200mA operating points. Typical applications include 24V industrial sensor heads (photoelectric, proximity, ultrasonic), IO-Link valve manifolds, IO-Link actuators, and remote I/O blocks on Profinet/EtherNet/IP fieldbus modules. The combination of surge protection and integrated DC-DC keeps the BOM small for IP67 sensor heads where PCB area is constrained and external protection networks are difficult to source. Designers should budget for the buck regulator's inductor and output capacitors per the datasheet typical application circuit, and verify that the surge protection rating meets the end-application EMC standard (IEC 61000-4-5). The exposed pad requires multiple thermal vias to the inner copper layers for adequate heat extraction at full-load buck operation. This page synthesizes distributor pricing, drop-in alternatives, IO-Link protocol design considerations, and PCB layout notes not collected in the manufacturer datasheet alone.

Permintaan RFG Kontak
MAX22530AWE+ - Isolated 12-bit 4-Ch SAR ADC | Analog Devices
MAX22530AWE+

MAX22530AWE+ - Isolated 12-bit 4-Ch SAR ADC | Analog Devices

The Analog Devices MAX22530AWE+ is a galvanically isolated, 4-channel, multiplexed, 12-bit successive-approximation-register (SAR) analog-to-digital converter (ADC) housed in a 16-pin wide-body SOIC (WSOIC) package. According to the MAX22530 datasheet, it integrates an isolated DC-DC converter that powers all field-side circuitry, allowing field-side measurements to be taken with no external power supply. The device samples at up to 22 ksps and exposes a serial (SPI-compatible) digital interface on the logic side. A SAR ADC is a successive-approximation-register analog-to-digital converter, a class of precision ADC that uses a binary-search algorithm and a precision DAC to convert an input voltage to a digital code in a fixed number of clock cycles. Isolated ADCs sit within the broader signal-chain hierarchy of data-acquisition front ends -> ADCs -> precision converters -> mixed-signal ICs -> semiconductors, where galvanic isolation adds a critical safety barrier between hazardous field voltages and the host processor. Key features include 12-bit resolution, four single-ended input channels multiplexed to one SAR core, integrated digital isolation, an integrated isolated DC-DC converter on chip, and a logic-side supply range of 1.71 V to 5.5 V. The wide-body SOIC package provides the reinforced clearance/creepage required for reinforced isolation. The MAXSafe™ architecture is designed for industrial sensors, PLC analog input modules, and any system that requires isolation between the analog front end and a low-voltage digital controller. Typical applications include isolated voltage and current sensing in motor drives, solar inverters, and industrial process-control loops; PLC analog input modules; battery-management systems; and medical equipment where patient isolation is mandatory. The internal DC-DC converter eliminates the bulky external isolated supply, shrinking the BOM. When designing with the MAX22530, pay attention to the input-channel MUX settling time and the recommended input RC anti-alias filter. Place decoupling capacitors close to both field-side and logic-side supply pins, and observe the wide-body SOIC PCB clearance rules for the rated isolation voltage.

Permintaan RFG Kontak
MAX232ACPE+ - RS-232 Transceiver, 5V, PDIP-16 | Maxim
MAX232ACPE+

MAX232ACPE+ - RS-232 Transceiver, 5V, PDIP-16 | Maxim

The Maxim Integrated MAX232ACPE+ is a +5 V RS-232 line-driver and receiver interface IC with two transmit channels and two receive channels in a 16-pin PDIP package. It supports the MAX220–MAX249 family use case for EIA/TIA-232E and V.28/V.24 communications interfaces where ±12 V supplies are unavailable. The verified distributor listings identify the part as a 5 V-powered multichannel RS-232 driver/receiver, while the target MPN is the +5 V-listed MAX232ACPE+ variant. An RS-232 transceiver is an interface IC that translates digital logic levels between a host or controller and a RS-232 cable. A driver converts TTL or CMOS signals into RS-232-level signals, while a receiver converts transmitted RS-232 levels back into logic levels. The MAX232ACPE+ is therefore placed between a digital system and an external serial connector, providing bidirectional communication through two driver and two receiver channels. The manufacturer family description states that the MAX220–MAX249 devices are intended for EIA/TIA-232E and V.28/V.24 communications interfaces, particularly where ±12 V is not available. The +5 V-powered architecture supports systems whose logic supply is commonly 5 V. The verified data also identifies the part as a 2/2 transceiver and as a 5 V multichannel RS-232 driver/receiver. Exact electrical limits, slew rates, receiver thresholds, supply-current figures, and temperature limits are marked as DATA_NEEDED because they are not included in the supplied verified excerpts. Typical uses include RS-232 console links, industrial-control serial ports, test equipment, embedded serial adapters, and legacy peripheral connections. The MAX232ACPE+ is appropriate when the board requires a conventional through-hole RS-232 interface and a 16-pin PDIP footprint. Designers should verify the complete datasheet pinout, charge-pump capacitor requirements, logic levels, data-rate limits, and ESD requirements before production release, because those values are not present in the supplied source snippets. The key design consideration is to treat the MAX232ACPE+ as a physical-layer interface rather than a protocol converter. The application must handle framing, baud-rate configuration, parity, flow control, and connector wiring separately. External charge-pump capacitors, input/output protection, grounding, and cable routing remain important in a working RS-232 design. The MAX232ACPE+ is best selected when a 16-pin PDIP RS-232 transceiver with two drivers and two receivers is required and the existing board already matches the verified package and pin arrangement. This page combines the verified distributor identity, manufacturer-family interface description, package information, and sourced cross-reference data. It does not infer unprovided electrical specifications, lifecycle claims, pricing values, compliance status, or complete pin assignments.

Permintaan RFG Kontak
MAX232ACSE+ - +5V RS-232 Transceiver | Analog Devices
MAX232ACSE+

MAX232ACSE+ - +5V RS-232 Transceiver | Analog Devices

The Analog Devices MAX232ACSE+ is a +5 V-powered, 2-transmitter and 2-receiver RS-232 interface transceiver packaged in a 16-pin SOIC. It belongs to the MAX220–MAX249 family of line drivers and receivers designed for EIA/TIA-232E and V.28/V.24 communication interfaces when ±12 V supplies are unavailable. The device provides the voltage conversion needed to connect low-voltage digital logic to a balanced RS-232 transceiver. An RS-232 transceiver is an interface IC that combines differential line-driver and receiver functions with logic-level conversion. The MAX232ACSE+ integrates two transmitters and two receivers, placing two RS-232 channels in one 16-pin surface-mount package. This integration is useful in equipment that requires bidirectional serial communication without external driver and receiver ICs. The MAX232ACSE+ operates from a +5 V supply and is identified in the manufacturer literature as a multichannel RS-232 driver and receiver. Its two-driver, two-receiver arrangement supports point-to-point links, control interfaces, industrial equipment, and communications ports that conform to the stated EIA/TIA-232E and V.28/V.24 interface families. The 16-SOIC package supports compact surface-mount PCB construction. The MAX220–MAX249 family uses on-chip charge-pump circuitry to generate the voltage levels required by RS-232 signals from a single positive supply. This topology lets the interface operate without a separate negative supply rail while preserving the positive and negative signal swings expected by RS-232 receivers. Exact charge-pump capacitor requirements and timing values should be taken from the manufacturer datasheet. Typical applications include computer and embedded-system service ports, industrial control links, test equipment, data-acquisition systems, and RS-232 connections between modern CMOS logic and legacy peripherals. The two transmitters and two receivers also support designs that need both command and status paths across one interface IC. PCB implementation should follow the manufacturer datasheet’s charge-pump capacitor and layout guidance. Keep the charge-pump connections compact, provide a stable ground return, and route RS-232 traces away from sensitive analog and high-speed digital nodes. Confirm the selected connector’s signal assignment and any required protection network before field deployment. This page combines the manufacturer family information with package, sourcing, and replacement guidance. It also distinguishes the closest same-footprint options and explains when an electrical or thermal difference prevents a replacement from being treated as a true drop-in substitute.

Permintaan RFG Kontak
MAX232ACSE+T - 5V RS-232 Transceiver, 2 Driver/2 Receiver | Maxim Integrated
MAX232ACSE+T

MAX232ACSE+T - 5V RS-232 Transceiver, 2 Driver/2 Receiver | Maxim Integrated

The Analog Devices (Maxim Integrated) MAX232ACSE+T is a +5V-powered, multichannel RS-232 driver/receiver IC delivering 2 drivers and 2 receivers in a 16-pin narrow-body SOIC (NSOIC-16) package. It operates from a single 4.5V to 5.5V supply, integrates a charge-pump DC-DC converter that generates the ±10V RS-232 signal swings from the +5V rail, and supports data rates up to 200 kbps. The +T suffix denotes tape-and-reel packaging. What is an RS-232 transceiver? An RS-232 transceiver is a type of line driver/receiver IC that translates logic-level UART signals (0V/5V or 0V/3.3V) to the bipolar ±5V to ±15V voltage levels defined by the EIA/TIA-232E and V.28/V.24 standards, enabling reliable data transmission between a microcontroller/FPGA and legacy serial ports, modems, point-of-sale terminals, and industrial instrumentation over cables up to 15 meters. The MAX232 family belongs to the broader category hierarchy: RS-232 transceiver -> line driver/receiver -> interface IC -> integrated circuit -> semiconductor. Key features include a wide +4.5V to +5.5V single-supply range, on-board dual charge pump (no external ±12V required), 200 kbps guaranteed data rate, ±30V receiver input tolerance (HBM ESD on older MAX232 revisions), 1 µA low-power shutdown mode, and integrated ESD protection on the RS-232 pins (device-dependent). The NSOIC-16 surface-mount package provides a compact footprint suitable for industrial, embedded, and consumer designs. The architecture uses an internal oscillator and four external 0.1uF charge-pump capacitors (C1+, C1-, C2+, C2-, V+, V-) to generate the required RS-232 voltage rails from a single +5V source. Drivers invert and level-shift TTL/CMOS inputs, while receivers accept bipolar RS-232 inputs and re-emit TTL/CMOS logic levels. The MAX232A variant specifies a higher slew rate than the original MAX232, supporting the 200 kbps data rate. Typical applications include industrial PLC serial ports, point-of-sale (POS) terminals, embedded microcontroller UART bridges, legacy PC peripheral interconnects, GPS module interfaces, and battery-backed service equipment. The single +5V supply eliminates the bulky ±12V rails required by older RS-232 designs, simplifying power architecture. When designing with the MAX232ACSE+T, place the four charge-pump capacitors (typically 0.1uF ceramic) as close as possible to the C1+, C1-, C2+, C2-, V+, and V- pins to minimize ripple on the generated RS-232 rails. For applications requiring higher ESD protection or faster data rates, consider the SP3232E or MAX3232 family (3.0V to 5.5V supply). This page synthesizes distributor pricing, drop-in alternatives, application circuit recommendations, and design guidance not consolidated in the manufacturer datasheet.

Permintaan RFG Kontak
MAX232ACUE+ - 120kbps Dual RS-232 Transceiver | Analog Devices
MAX232ACUE+

MAX232ACUE+ - 120kbps Dual RS-232 Transceiver | Analog Devices

The Analog Devices MAX232ACUE+ is a +5 V-powered dual RS-232 transceiver with two drivers and two receivers, a maximum data rate of 120 kbps, and a 16-pin TSSOP package. Its 4.5 V to 5.5 V single-supply operation suits equipment that cannot provide the traditional ±12 V RS-232 interface voltage. The integrated charge-pump circuitry provides the bipolar voltage levels required by RS-232 while the host-side logic operates from a single 5 V rail. An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 line levels and converts received line-level signals back into logic. Within the interface hierarchy, the MAX232 belongs to the RS-232 driver/receiver family, then to the broader transceiver category and ultimately to interface ICs. This device combines two transmit channels with two receive channels, making it suitable for bidirectional point-to-point serial links, console connections, and industrial control equipment. The MAX232ACUE+ supports 120 kbps signaling and uses a 4.5 V to 5.5 V supply. According to the manufacturer product page, the MAX232 family is intended for EIA/TIA-232E and V.28/V.24 communications interfaces where ±12 V is unavailable. The commercial MAX232ACUE+ ordering option is specified for 0 °C to +70 °C operation and is supplied in a gull-wing TSSOP-16 surface-mount package. Each transmit channel converts one TTL/CMOS-compatible input into a bipolar RS-232 output, while each receive channel converts an RS-232 input into a logic-level output. The MAX232 family includes on-chip charge-pump capacitors and driver circuitry, reducing the external component count compared with discrete RS-232 implementations. Exact propagation delay, receiver threshold, output protection, and charge-pump operating-current details should be confirmed in the manufacturer datasheet for the selected ordering option. Typical uses include serial console links, point-to-point data acquisition, test equipment, industrial controllers, and embedded systems communicating with legacy RS-232 devices. For short or low-noise industrial links, the 120 kbps rate provides more than enough margin for many legacy protocols. Longer cables, high common-mode noise, and electrically long interconnects require careful grounding, shielding, and protection planning. Place the MAX232ACUE+ close to the connector or transceiver boundary so the protected RS-232 lines do not run through sensitive digital circuitry. Route ground and signal conductors together where practical, use suitable protection against surge and ESD events, and check that downstream logic levels match the device's input thresholds. The 16-pin TSSOP footprint also requires standard fine-pitch assembly clearance around adjacent components. This product page combines the manufacturer's device information with distributor specifications, replacement cross-references, and practical PCB guidance. It also distinguishes verified device attributes from parameters that require datasheet confirmation, helping engineers evaluate the MAX232ACUE+ and its compatible alternatives more efficiently.

Permintaan RFG Kontak
MAX232ACUE+T - 5V Dual RS-232 Transceiver | Analog Devices
MAX232ACUE+T

MAX232ACUE+T - 5V Dual RS-232 Transceiver | Analog Devices

Analog Devices MAX232ACUE+T is a 5V-powered, dual RS-232 transceiver with two drivers and two receivers, supplied in a 16-pin TSSOP package. The MAX232ACUE+T designation identifies the commercial-temperature version with gull-wing leads in a rectangular surface-mount package. It is intended for systems that need to translate digital logic levels to and from the voltage, polarity, and drive characteristics required by RS-232 links. An RS-232 transceiver is an interface IC within the broader hierarchy of interface semiconductors, serial communication devices, and data-conversion components. It combines transmit and receive functions in one package: outgoing logic signals pass through line drivers that provide RS-232-compatible levels, while incoming serial signals pass through receivers that convert RS-232 levels back to logic-compatible signals. Integrating both directions simplifies PCB layout in point-to-point serial links, industrial controllers, and service interfaces. The primary identified features are two transmit channels, two receive channels, operation from a 5V supply, and a compact 16-pin TSSOP footprint. The MAX232ACUE+T uses the MAX232 family interface architecture and is intended for commercial-temperature equipment. Its gull-wing terminal arrangement supports conventional surface-mount assembly and inspection after soldering, while the 16-pin package provides a practical size reduction compared with larger through-hole implementations. Technical suitability depends on the voltage levels, data rate, cable length, grounding method, and protection strategy of the connected RS-232 port. Because RS-232 uses single-ended signaling and negative-going voltage levels, the interface must be evaluated together with its charge-pump capacitors, supply bypass, connector protection, and common-mode conditions. The manufacturer datasheet should be used for the complete pin-description table, recommended capacitor values, electrical limits, and operating conditions before layout release. Typical uses include configuration and service ports on industrial equipment, serial links between controllers and peripheral modules, RS-232 test equipment, and legacy communications interfaces retained during product modernization. The device is especially useful where two full-duplex RS-232 channels are required but a larger multi-channel transceiver would be unnecessary. A design should still verify that the selected connector and cable environment match the electrical limits of the interface. PCB layout is a central implementation consideration. Place the required charge-pump and bypass capacitors close to their associated pins, keep the RS-232 driver outputs away from sensitive analog or high-speed logic, and provide an appropriate chassis or signal-ground strategy at the connector. Add transient protection when the cable can be longer than the protected equipment area or exposed to industrial transients. This page organizes the verified product identity, electrical requirements, pin-compatible replacement options, interface applications, and practical RS-232 layout guidance. It helps engineers move from MPN identification to footprint, replacement, and circuit-implementation checks while keeping the final design anchored to the manufacturer datasheet.

Permintaan RFG Kontak
MAX232ACWE+ - Dual RS-232 Transceiver | Maxim Integrated
MAX232ACWE+

MAX232ACWE+ - Dual RS-232 Transceiver | Maxim Integrated

The Maxim Integrated MAX232ACWE+ is a dual RS-232 line-driver and receiver transceiver packaged in a 16-pin SOIC. It provides two driver channels and two receiver channels for implementing a complete two-channel RS-232 interface from a +5 V supply. The device is intended for EIA/TIA-232E and V.28/V.24 communications interfaces, particularly where bipolar ±12 V supplies are unavailable. An RS-232 transceiver is an interface IC that combines differential line-driver outputs with receiver inputs. It belongs to the communications-interface hierarchy, where a single-ended logic signal is converted into an RS-232-compatible level and an incoming RS-232 signal is converted back into a logic-level voltage. The MAX232ACWE+ uses integrated charge-pump circuitry to generate the positive and negative voltage levels required by the RS-232 line interface. The principal feature is its combination of two transmitters and two receivers in one 16-pin SOIC. This integration reduces the component count and board area required for a dual-port RS-232 connection. The +5 V operating architecture supports equipment designs in which modern digital logic operates from a single positive supply while the external interface still requires RS-232 voltage levels. Operationally, the transmitter section converts TTL or CMOS logic signals into RS-232 levels, while the receiver section performs the inverse conversion. The Maxim Integrated MAX220-MAX249 family documentation identifies this family for EIA/TIA-232E and V.28/V.24 interfaces. The MAX232ACWE+ is therefore appropriate for industrial control links, service-console connections, instrumentation, and embedded systems that communicate with legacy RS-232 equipment. A key design consideration is external bypass capacitance around the charge-pump and supply pins. Place the required capacitors close to their associated package pins, use the shortest practical ground return, and avoid routing the RS-232 driver outputs through unprotected high-impedance nodes. The RS-232 drivers and receivers are intended for wired communication links rather than long-distance high-speed data interfaces. MAX232ACWE+ is identified in current distributor records as a 2/2 full-RS-232 transceiver in a 16-SOIC package. This page combines the manufacturer-family description, package information, cross-reference records, practical interface guidance, and application-specific engineering considerations for engineers evaluating the MAX232ACWE+ or a compatible replacement.

Permintaan RFG Kontak
MAX232AESE+ - Dual RS-232 Transceiver in SOIC-16 | Maxim
MAX232AESE+

MAX232AESE+ - Dual RS-232 Transceiver in SOIC-16 | Maxim

The Maxim Integrated MAX232AESE+ is a +5 V-powered RS-232 driver/receiver IC with two drivers and two receivers in a 16-pin SOIC package. Its 4.5 V to 5.5 V supply range, dual-channel signal-path arrangement, and 3.90 mm-wide SOIC-16 package make it suitable for conventional serial-interface equipment. An RS-232 transceiver is an interface IC that combines line drivers and receivers for bidirectional serial communication. The MAX220 through MAX249 family is designed for EIA/TIA-232E and V.28/V.24 communications interfaces, particularly systems in which approximately ±12 V is unavailable. The MAX232AESE+ implements this interface function with a single +5 V supply while providing separate transmit and receive channels. The device includes two RS-232 drivers and two receivers, giving the system two driver channels and two receiver channels in one package. Its specified 4.5 V to 5.5 V operating-supply range supports regulated 5 V system rails. A 16-SOIC package allows use of familiar PCB routing and assembly practices, while its 3.90 mm package width fits standard narrow-body SOIC board layouts. The MAX232A family is part of Maxim Integrated's +5 V-powered multichannel RS-232 portfolio. A single IC can support two transmit paths and two receive paths, reducing the number of separate interface components required in multi-channel equipment. The product description identifies the MAX232A device family as production and associates the MAX232A with +5 V-powered multichannel RS-232 drivers and receivers. Typical uses include service-console connections, configuration interfaces, industrial-control links, test equipment, and embedded systems that require a wired RS-232 port. In these applications, the two transmitter channels can carry command or data signals, while the two receiver channels can accept responses or status information. The same IC can also be used where only one direction of communication is required, leaving additional channels available for future expansion or control signals. When laying out a board around the MAX232AESE+, place charge-pump support capacitors and interface-network components close to their associated pins, and keep the RS-232 connector-side traces away from sensitive analog and digital timing circuitry. Confirm the external capacitor values, line-driver load assumptions, and protection requirements against the manufacturer datasheet before releasing the PCB layout. This page combines the manufacturer product information, distributor package and availability details, cross-reference findings, a parameter comparison, and practical interface-design guidance. It is intended to accelerate component identification and replacement planning while preserving the distinction between a verified pin-compatible substitute and a merely functional alternative.

Permintaan RFG Kontak
MAX232AEUE+ - 5V RS-232 Transceiver | Analog Devices
MAX232AEUE+

MAX232AEUE+ - 5V RS-232 Transceiver | Analog Devices

The Analog Devices MAX232AEUE+ is a +5 V-powered, 2-driver/2-receiver RS-232 transceiver packaged in a 16-pin TSSOP. It provides a full RS-232 interface for systems that need bidirectional serial communication over single-ended, unbalanced lines. The device operates from a 4.5 V to 5.5 V supply and is identified by Analog Devices as a production part in the MAX232A family. Its compact surface-mount package suits industrial controllers, data-acquisition equipment, service interfaces, and embedded systems where board area is constrained. An RS-232 transceiver is an interface IC that combines line drivers and line receivers with the charge-pump circuitry required to generate the positive and negative voltages used by RS-232 ports. A transmitter converts logic-level signals into RS-232 levels, while a receiver converts RS-232 inputs back into logic levels. The MAX232AEUE+ therefore provides a complete point-to-point or multipoint serial interface in one device rather than requiring separate driver and receiver components. The principal configuration is two transmit channels and two receive channels, allowing two serial directions or four available driver or receiver channels when only unidirectional operation is required. Because it is a full RS-232 implementation rather than an RS-422 or RS-485 interface, designers must account for RS-232 voltage levels, grounding, cable length, transient exposure, and point-to-point communication topology when planning the port. The exact driver and receiver data rates, loopback behavior, input levels, and shutdown characteristics should be confirmed from the MAX232A manufacturer datasheet. The MAX232AEUE+ uses the MAX232A family's integrated charge-pump approach to develop the bipolar voltage swings required by RS-232 without requiring a separate negative supply. This internal arrangement reduces the external support circuitry relative to a discrete transmitter implementation, although charge-pump capacitors and interface protection still require careful layout. As a 5 V interface IC, it is designed to connect CMOS or TTL-level digital circuitry to an RS-232 port through appropriate signal conditioning and protection. Typical applications include programming and configuration ports in embedded instruments, industrial control modules, laboratory data loggers, point-of-sale equipment, and serial adapters. Two transmitter and two receiver channels also support mirrored communication links or multiple RS-232 lines when the system architecture permits. For short-distance point-to-point links, the device can form the central electrical interface between a host UART and a remote peripheral, with grounding and surge protection handled at the connector. PCB placement should minimize trace length between the MAX232AEUE+, its charge-pump capacitors, and the protection network at the RS-232 connector. Keep the interface return path continuous, use a suitable ground reference, and place transient-protection devices close to the connector. Confirm the pinout, capacitor values, and recommended layout directly in the manufacturer datasheet before fabrication because the exact connector and protection topology depend on cable exposure. This product page combines the exact MAX232AEUE+ ordering information with the verified 16-pin TSSOP package, 4.5 V to 5.5 V operating range, production status, and package-level drop-in comparison. It also organizes procurement, replacement, application, and design guidance so engineers can evaluate the transceiver before committing a board layout.

Permintaan RFG Kontak
MAX232AEUE+T 5V RS-232 Transceiver | Analog Devices
MAX232AEUE+T

MAX232AEUE+T 5V RS-232 Transceiver | Analog Devices

Analog Devices MAX232AEUE+T is a +5 V-powered, dual transmitter/receiver RS-232 interface IC packaged in a 16-pin TSSOP. It provides two full-duplex RS-232 driver channels and two receiver channels for translating between TTL/CMOS logic levels and balanced, bipolar RS-232 signals. The device is intended for EIA/TIA-232E, V.28, and V.24 communications interfaces where +12 V and -12 V supplies are unavailable. An RS-232 transceiver is an interface IC that bridges digital logic and a serial communications port. The transmitter converts TTL/CMOS signals into RS-232 levels, while the receiver converts RS-232 inputs into logic-compatible signals. In the broader device hierarchy, the MAX232AEUE+T belongs to the line-driver/receiver class, interface IC family, and semiconductor category used to connect a UART or other digital controller to an RS-232 port. The MAX232AEUE+T is identified as a 2/2 full-RS-232 transceiver, meaning that it contains two driver outputs and two receiver inputs. Its +5 V supply operation allows implementation around conventional 5 V digital systems. The MAX232A family is listed in production, and the 16-pin TSSOP package is approximately 4.40 mm wide. Its dual-channel arrangement is useful where two serial ports must share a compact board footprint. The manufacturer describes the MAX220 through MAX249 family as supporting EIA/TIA-232E and V.28/V.24 interfaces, especially where positive and negative 12 V rails are not available. The MAX232A therefore concentrates the RS-232 electrical layer beneath an existing UART or microprocessor serial interface. Exact slew rate, propagation delay, receiver thresholds, and charge-pump capacitor requirements should be confirmed in the MAX232A data sheet before a new circuit is released. Typical uses include industrial serial adapters, laboratory instrument interfaces, configuration ports, embedded equipment links, and legacy computer peripherals. The two transmitters and two receivers permit full-duplex communication on each RS-232 channel. Board-level design must preserve the required charge-pump capacitors, logic-side supply decoupling, and clearances between logic and high-voltage RS-232 nets. Keep input and output transceivers close to their associated connector or signal source, and route differential RS-232 traces away from sensitive clocks and analog signals. Confirm the package pin numbering against the MAX232A data sheet before assigning PCB nets. The narrow TSSOP body also requires careful assembly planning because its lead pitch and body width leave limited routing space. This page organizes the verified MAX232A family information, exact MAX232AEUE+T package identification, sourcing details, interface standards, and replacement considerations into an engineering-focused reference. It also distinguishes the directly documented device from related family members whose package, channel count, or electrical details differ.

Permintaan RFG Kontak
MAX232AEWE+ - 200kb/s Dual RS-232 Transceiver | Analog Devices
MAX232AEWE+

MAX232AEWE+ - 200kb/s Dual RS-232 Transceiver | Analog Devices

The Analog Devices MAX232AEWE+ is a +5 V-powered, 2/2 full-duplex RS-232 transceiver with a maximum data rate of 200 kb/s, housed in a 16-pin SOIC package measuring 0.295 inch, or 7.50 mm, in body width. It integrates two RS-232 drivers and two receivers for translating between TTL/CMOS logic levels and bipolar RS-232 signal levels. An RS-232 transceiver is an interface IC that bridges modern digital logic and the voltage-defined RS-232 serial bus. Its transmitter converts low-voltage logic signals into RS-232-compatible levels, while its receiver converts RS-232 inputs back into logic-compatible signals. Within the broader semiconductor hierarchy, the MAX232AEWE+ is an interface IC, a line-driver and receiver device, and a single-supply communications transceiver. The principal feature set includes two driver channels, two receiver channels, full-duplex operation, a +5 V supply, and operation up to 200 kb/s. These characteristics make it suitable for equipment that needs bidirectional serial connectivity without implementing separate level-shifting circuits for each direction. The SOIC-16 form factor also supports conventional surface-mount PCB assembly. MAX232A devices use Maxim's RS-232 interface architecture to support EIA/TIA-232E and V.28/V.24-style communications interfaces. The MAX232AEWE+ operates from a single +5 V rail, allowing the logic-side system to use the same supply as many conventional embedded controllers. Its integrated transmitter and receiver functions make pin and component planning simpler than a discrete bidirectional level-shifter arrangement. Typical applications include serial service ports, data-acquisition equipment, industrial controllers, test-and-measurement instruments, and embedded systems that exchange RS-232 commands or data with a host computer. The 200 kb/s maximum rate supports legacy serial links while remaining suitable for moderate-throughput control and monitoring traffic. Firmware must configure the host and peripheral for the same baud rate, framing, parity, and handshaking method. PCB design should place charge-pump and interface capacitors close to their specified pins, maintain short return paths, and provide suitable protection for exposed external cables. Signal integrity and ESD performance depend on connector placement, grounding, transmission-line geometry, and the protection network rather than on the IC alone. This product page consolidates the MAX232AEWE+ electrical identity, package information, verified cross-reference options, application guidance, and practical PCB considerations to support faster component selection and first-board bring-up.

Permintaan RFG Kontak
MAX232AEWE+T - +5V 2/2 RS-232 Transceiver | Analog Devices
MAX232AEWE+T

MAX232AEWE+T - +5V 2/2 RS-232 Transceiver | Analog Devices

The Analog Devices MAX232AEWE+T is a +5 V-powered, 2/2 RS-232 transceiver in a 16-SOIC package. It combines two RS-232 drivers and two receivers, supports full-duplex serial communication, and is designed for EIA/TIA-232E and V.28/V.24 interfaces. The MAX232AEWE+T variant belongs to the MAX232A family, which uses a higher slew rate for improved interface performance. An RS-232 transceiver is an interface IC that translates between single-ended, bipolar RS-232 signals and logic-level digital signals. The receiver converts an RS-232 input into a CMOS-compatible logic level, while the driver converts a logic-level input into an RS-232 output. In the broader hierarchy, the MAX232AEWE+T is an interface transceiver, a communication IC, and a semiconductor designed to bridge a host UART and an RS-232 physical layer. The device provides two driver channels and two receiver channels in one package. Its +5 V supply arrangement simplifies use in conventional +5 V embedded systems, while integrated level translation eliminates separate RS-232 line drivers and receivers. The MAX232A designation also identifies a higher-slew-rate implementation intended for RS-232 applications requiring improved transition behavior compared with the base MAX232 family. The MAX232AEWE+T is suitable for EIA/TIA-232E and V.28/V.24 communication interfaces. Its 16-SOIC package permits conventional surface-mount assembly and provides enough pins for two transmit channels, two receive channels, supply connections, ground, and the internal charge-pump components. Because RS-232 is a single-ended interface, the supply and signal-return ground path must be managed carefully in systems with long cables or significant ground-potential differences. Typical applications include industrial serial consoles, point-of-sale equipment, data-acquisition systems, embedded control boards, and legacy peripheral connections. It can connect a UART-equipped microcontroller, DSP, or field-programmable logic device to an RS-232 port while limiting the design to one interface IC rather than separate line-driver and receiver packages. PCB implementation should follow the charge-pump capacitor requirements and layout guidance in the manufacturer datasheet. Place the required capacitors close to their associated pins, maintain a continuous ground reference, and route the RS-232 cable-side traces away from sensitive digital and analog nets. Verify the complete interface against the intended baud rate, cable length, and grounding topology before production release. This product page combines the MAX232AEWE+T family specifications with same-package alternatives, application guidance, and design notes intended to help engineers select and implement the interface efficiently.

Permintaan RFG Kontak
MAX232AMJE - 5V RS-232 Transceiver | Maxim Integrated
MAX232AMJE

MAX232AMJE - 5V RS-232 Transceiver | Maxim Integrated

The Maxim Integrated MAX232AMJE is a 5 V-powered RS-232 line-driver and receiver transceiver with two transmit channels, two receive channels, and a 200 kbps data rate in a 16-pin CERDIP package. It converts logic-level UART signals to RS-232 bipolar levels and converts incoming RS-232 signals back to CMOS-compatible logic levels. The charge-pump design generates positive and negative transmission voltages without requiring a separate ±12 V supply. An RS-232 transceiver is an interface IC within the broader communication-IC and interface-controller hierarchy. It provides the electrical conversion between single-ended digital logic and the bipolar voltage signaling used by RS-232 equipment. This makes the MAX232AMJE suitable for connecting a host, controller, or embedded processor to a serial port, diagnostic interface, industrial control system, or other RS-232 peer. The MAX232AMJE operates from a single 5 V supply and uses 0.1 µF external charge-pump capacitors, according to the Maxim Integrated manufacturer datasheet. Its two-driver, two-receiver arrangement supports two RS-232 channels in one package. The 200 kbps signaling rate is suitable for standard asynchronous serial communication while also providing margin for many industrial-control, instrumentation, and embedded service interfaces. Technically, the integrated charge pumps generate the bipolar voltages required by RS-232 while the drivers add level translation and the receivers provide thresholded noise immunity. The MAX232AMJE family is intended for EIA/TIA-232E and V.28/V.24 communications interfaces, particularly where ±12 V is unavailable. Its 16-pin CERDIP construction is appropriate for through-hole industrial, telecommunications, and legacy equipment designs. Typical uses include PC-compatible serial ports, embedded UART links, industrial controllers, test equipment, and service-console connections. In each case, the host UART connects to the logic-side pins while the RS-232 line driver pins connect through the intended cable or connector arrangement. Because RS-232 is point-to-point, each driver should connect to one receiver rather than a multi-drop bus. When laying out the circuit, place the 0.1 µF charge-pump capacitors close to their designated pins and keep the transceiver away from high-current switching nodes. Confirm line protection, ground reference, and connector pin assignment before energizing the interface. The MAX232 family is listed in production by the manufacturer, and its long-standing through-hole package remains useful for replacement and legacy-system maintenance. This page combines the device specifications, confirmed package information, practical interface guidance, and a focused same-package replacement comparison. It is intended to help engineers identify the correct MAX232 family member, plan the charge-pump network, and evaluate drop-in options for a 16-pin through-hole RS-232 design.

Permintaan RFG Kontak
MAX232BASE+ 2/2 RS-232 Transceiver, 5V | Analog Devices
MAX232BASE+

MAX232BASE+ 2/2 RS-232 Transceiver, 5V | Analog Devices

The Analog Devices MAX232BASE+ is a dual RS-232 transceiver containing two drivers and two receivers, powered from a single 5 V supply and housed in a 16-pin SOIC package. It uses an on-chip capacitive voltage generator to produce the positive and negative voltages required by the TIA/EIA-232-F interface. Each receiver converts an RS-232 input into a 5 V TTL/CMOS logic level, while each driver converts a TTL/CMOS input into a compliant RS-232 voltage. An RS-232 transceiver is an interface IC within the broader hierarchy of interface ICs, serial communication ICs, and semiconductors. It bridges the voltage-domain difference between ordinary digital logic and the bipolar signal levels used by RS-232 links. This conversion allows equipment with a 5 V UART, microcontroller, or general-purpose logic port to communicate with legacy computers, industrial controllers, test systems, and other equipment using the RS-232 standard. The MAX232BASE+ integrates four key interface functions: two line drivers and two line receivers. Its capacitive voltage generator allows a single +5 V supply to produce the positive and negative voltage levels needed by the drivers. According to the manufacturer datasheet, receiver logic threshold is typically 1.3 V with approximately 0.5 V of typical hysteresis. The receivers can also accept inputs up to ±30 V, providing tolerance for RS-232 voltage excursions. The device's architecture combines TTL/CMOS-compatible logic-side signals with charge-pump-generated RS-232 levels. The charge pump requires external capacitors, while the receiver and driver sections perform level translation independently. This allows two bidirectional RS-232 channels to be implemented with one 16-pin device. Because the MAX232BASE+ operates from 5 V, it integrates naturally with 5 V UART logic without a separate negative supply for the interface converter. Typical applications include legacy PC serial-port interfaces, industrial control panels, instrumentation, laboratory equipment, and embedded systems that retain an RS-232 connector. The MAX232BASE+ is especially useful when the host controller uses 5 V logic and the board requires two RS-232 lines rather than a larger multichannel transceiver. Its 16-pin SOIC package also allows a direct replacement strategy when the footprint and electrical behavior match. Circuit design must provide the charge-pump capacitors and input/output bypass capacitance specified by the manufacturer datasheet. Keep the charge-pump loop compact because those pins carry high-frequency AC current. Connect the logic ground and interface-ground reference as directed by the device documentation, and route the RS-232 connector-side traces away from sensitive analog and clock circuitry to reduce noise pickup. This page combines the confirmed device specifications, drop-in replacement candidates, package details, and practical circuit guidance for engineers evaluating the MAX232BASE+. It is intended to help with initial design selection, replacement planning, and PCB implementation rather than replace the complete pin-description table, ordering information, or absolute-maximum-rating tables in the manufacturer documentation.

Permintaan RFG Kontak
MAX232BASE+T - 5V 2/2 RS-232 Transceiver | Analog Devices
MAX232BASE+T

MAX232BASE+T - 5V 2/2 RS-232 Transceiver | Analog Devices

The Analog Devices MAX232BASE+T is a 5 V RS-232 transceiver containing two drivers and two receivers in a 16-pin SOIC package. It supports data rates up to 200 kbps over a 4.5 V to 5.5 V supply range and operates from 0°C to +70°C. The device uses on-chip charge-pump circuitry to convert TTL/CMOS logic levels into RS-232 bipolar levels and to receive RS-232 signals without requiring a separate negative supply. An RS-232 transceiver is a bridge between a digital controller and a physical serial interface. Within the signal-chain hierarchy, it belongs to the interface-IC class, sits below RS-232 line drivers and receivers, and connects digital logic such as a microcontroller UART to external equipment. The MAX232BASE+T implements the full-duplex portion of that interface with two transmit channels and two receive channels, making it suitable for legacy ports, service consoles, industrial control links, and equipment built around PC-compatible serial communication. Key characteristics include a 200 kbps maximum data rate, 500 mV receiver hysteresis, a 5 V nominal supply, and 2/2 full-duplex configuration. Its integrated charge pumps eliminate the need for a separate negative rail, while the 16-pin SOIC package supports conventional surface-mount assembly. The MAX232BASE+T is specified for commercial-temperature operation and is intended for equipment where a standard RS-232 port is required rather than higher-voltage or isolated interfaces. The MAX232 family is based on charge-pump voltage conversion. A small flying capacitor is alternately pumped above and below ground to generate the bipolar voltage swing needed by RS-232 drivers. Receiver inputs include threshold hysteresis, which helps distinguish valid logic states from noise near the transition region. The transmitter converts logic-high and logic-low inputs into the positive and negative voltages defined for RS-232, while the receiver translates those bipolar levels back into logic-compatible signals. Typical applications include legacy PC serial-port adapters, configuration interfaces for industrial equipment, programming ports for test systems, and control links between older host hardware and embedded controllers. The 200 kbps capability is more than adequate for command-and-response protocols, while the two receive channels can also support hardware flow-control or status signals when the connector pin assignment permits it. When laying out a board around the MAX232BASE+T, place the charge-pump capacitors and the V+ bypass capacitor close to their designated pins, and route each transceiver line away from switching nodes. Keep the connector-facing nets short, provide a solid ground reference, and observe the RS-232 common-mode limits specified in the manufacturer datasheet. The MAX232 is not an RS-485 transceiver, so it cannot replace an RS-485 physical layer without a different device and termination strategy. This page combines package and interface details, drop-in replacement guidance, comparison parameters, and practical layout guidance in a single engineering-focused reference for engineers sourcing or maintaining legacy serial-port designs.

Permintaan RFG Kontak
MAX232BAWE+ - 2/2 RS-232 Transceiver, 200 kbps | Analog Devices
MAX232BAWE+

MAX232BAWE+ - 2/2 RS-232 Transceiver, 200 kbps | Analog Devices

Analog Devices MAX232BAWE+ is a +5 V RS-232 interface transceiver with two drivers and two receivers, a maximum data rate of 200 kbps, and a 16-pin SOIC package. The device operates from a 4.5 V to 5.5 V supply and supports a 0°C to +70°C temperature range. MAX232BAWE+ converts TTL-compatible logic levels to and from RS-232 line levels, making it suitable for industrial control, instrumentation, and legacy serial-port equipment. An RS-232 transceiver is an interface IC that bridges the voltage domains used by TTL/CMOS logic and RS-232 serial communications. The MAX232 family integrates charge-pump circuitry, drivers, and receivers into one package. This integration eliminates a separate RS-232 level-shifting circuit and places the complete signal-conditioning path close to the host logic. Within the product hierarchy, the MAX232 is an RS-232 transceiver, an interface IC, and a semiconductor. The principal operating characteristics include two driver channels, two receiver channels, full-duplex capability, 200 kbps signaling, and 500 mV receiver hysteresis. The 500 mV hysteresis helps reject small noise disturbances around the receiver threshold. Its 4.5 V to 5.5 V supply range provides compatibility with conventional +5 V digital systems, while the integrated charge-pump circuitry develops the positive and negative voltage levels required by RS-232 drivers. This MAX232BAWE+ device uses the 16-pin small-outline integrated-circuit package identified as 16-SOIC in the product information. Its 2/2 driver-receiver organization permits two logical serial channels per device. The 200 kbps maximum data rate is suitable for many legacy control and diagnostic ports, but it does not target high-speed differential serial protocols. Use a newer multi-protocol interface when rates substantially above 200 kbps, lower supply voltage, or smaller package area are required. Typical uses include industrial serial adapters, laboratory instruments, embedded-control boards, barcode-scanner interfaces, and service equipment that retains an RS-232 port. In these systems, the MAX232BAWE+ can connect a microcontroller UART to a DB9 or other RS-232 connector. Designers must still account for cable length, grounding, protection, and the unidirectional nature of each RS-232 driver channel. For layout, place the device close to the connector or protected interface boundary and route each RS-232 line away from sensitive clock and analog signals. Follow the manufacturer datasheet for the charge-pump capacitor connections, supply bypass capacitor, and unused-channel handling. Confirm the full logic-level and channel direction before assigning pins in a new PCB or converting an existing design. This product reference combines the exact MAX232BAWE+ ordering information with practical RS-232 interface guidance, drop-in family comparisons, and engineering-focused design notes. It is intended to help engineers identify the correct package, operating limits, and replacement path without overlooking the distinctions between electrically similar MAX232 variants.

Permintaan RFG Kontak
MAX232BAWE+T - 5V 2/2 RS-232 Transceiver | Analog Devices
MAX232BAWE+T

MAX232BAWE+T - 5V 2/2 RS-232 Transceiver | Analog Devices

Analog Devices MAX232BAWE+T is a +5 V-powered RS-232 transceiver with two transmitters and two receivers, packaged in a 16-pin SOIC. It supports full RS-232 communication and operates across a temperature range of -40°C to +125°C. The MAX232BAWE+T is identified by Analog Devices as a production part and is supplied in the +T tape-and-reel configuration. An RS-232 transceiver is an interface IC that combines the driver circuitry required to convert logic-level signals into RS-232 voltage levels with receiver circuitry that converts RS-232 signals back into logic levels. This integrated bidirectional interface simplifies point-to-point serial links between equipment such as industrial controllers, test systems, data-acquisition equipment, and computer peripherals. Within the interface hierarchy, the MAX232 belongs to the RS-232 transceiver family of communication interface semiconductors. The principal feature of the MAX232BAWE+T is its two-transmitter, two-receiver arrangement, allowing two serial channels to be implemented in one device. Its +5 V supply arrangement simplifies integration with conventional +5 V digital logic. The wide -40°C to +125°C operating range makes the device suitable for industrial and extended-temperature equipment, while the 16-SOIC package supports compact, surface-mount PCB construction. Analog Devices lists the MAX232 family as a production product and identifies the MAX232BAWE+T as a 2/2 full-RS-232 transceiver in a 16-SOIC package. The BAWE+ order code denotes the temperature and package configuration, while the +T suffix identifies tape-and-reel delivery. Because the device combines multiple RS-232 channels in one package, board designers can reduce the number of separate interface ICs while preserving a standardized RS-232 signal interface. Typical uses include configuration-port links in industrial equipment, serial adapters for test and measurement instruments, control links in data-acquisition systems, and communications between embedded controllers and legacy RS-232 peripherals. The two transmitters can support two outbound signal paths, while the two receivers can monitor two inbound signal paths when the associated system architecture requires separate connections. For implementation, treat the RS-232 pins as a differential voltage interface rather than ordinary logic-level inputs. Confirm the board's TX, RX, signal-ground, and logic-supply connections against the manufacturer pin-description table, and route the interface connector and transceiver so that external cable transients do not bypass the intended protection strategy. The +T tape-and-reel order code must also match the PCB assembly process. This page combines the manufacturer product information with package-level guidance, structured application analysis, and same-footprint replacement options. It is intended to accelerate component identification while preserving the distinction between the production MAX232BAWE+T configuration and other electrical or package variants in the broader MAX232 family.

Permintaan RFG Kontak
MAX232BEASE+ - Dual RS-232 Transceiver | Analog Devices
MAX232BEASE+

MAX232BEASE+ - Dual RS-232 Transceiver | Analog Devices

The Analog Devices MAX232BEASE+ is a dual, full RS-232 line driver and receiver designed for bidirectional serial communication using TIA/EIA-232-F and V.28 interfaces. It provides two driver channels and two receiver channels in a 16-SOIC package, allowing a single device to support one complete RS-232 port. The MAX232 family uses on-chip charge-pump circuitry to generate the positive and negative voltage swings required by RS-232 from a single supply, avoiding the need for a separate negative power rail. The interface is intended for equipment where logic-level signals must be translated into the voltage range and signaling characteristics required by RS-232 equipment. The B suffix identifies the industrial temperature option, while the E suffix denotes the 16-SOIC package configuration and the A suffix indicates the MAX232A family configuration. The integrated charge pumps and compact surface-mount footprint make the MAX232BEASE+ suitable for industrial control equipment, instrumentation, data acquisition systems, service interfaces, and legacy peripheral connectivity. The MAX232 family is designed to support standard RS-232 data rates while providing receiver and driver functions in one package. In practice, designers should still account for the electrical limits of the RS-232 standard, including cable length, ground reference, protection, and the possibility of connecting to equipment that uses non-standard voltage levels. The MAX232BEASE+ is a practical choice when a compact, single-supply RS-232 interface is required and the system does not need the higher drive strength or extended features found in newer multi-driver interface families.

Permintaan RFG Kontak
MAX232BEASE+T - 2Tx/2Rx RS-232 Transceiver | Analog Devices
MAX232BEASE+T

MAX232BEASE+T - 2Tx/2Rx RS-232 Transceiver | Analog Devices

The Analog Devices MAX232BEASE+T is a +5 V-powered RS-232 interface transceiver with two transmit channels, two receive channels, and a 16-pin SOIC package. Its specified operating-temperature range is -40°C to +125°C, making it suitable for industrial equipment, embedded systems, and serial-interface subsystems that require a compact, extended-temperature communications solution. An RS-232 transceiver is an interface IC that bridges the voltage levels used by a host or controller and those used by an RS-232 link. The transmitter portion converts logic-level signals into RS-232-compatible levels, while the receiver portion converts incoming RS-232 signals back into logic-compatible levels. This transceiver category belongs to the broader hierarchy of interface IC, communications IC, and semiconductor. The MAX232BEASE+T provides a 2/2 full-duplex RS-232 arrangement, meaning that two channels can transmit while two other channels receive. Its +5 V supply operation supports integration with conventional 5 V digital logic. The 16-SOIC package offers a small, surface-mountable footprint, while the -40°C to +125°C rating provides broad temperature coverage for demanding equipment. RS-232 transceivers are especially useful where point-to-point serial communication must cross a larger voltage range than a CMOS or TTL interface provides. Practical implementations place the transceiver between a UART or communications controller and an external DB9 or equivalent RS-232 connector. Signal integrity depends on correct grounding, cable routing, connector implementation, and compliance with the applicable interface requirements for the finished system. Typical applications include industrial serial consoles, test and measurement equipment, instrumentation, embedded control systems, and legacy peripheral connections. The two transmitters support independent outgoing channels, while the two receivers support dual incoming paths. Such a configuration can simplify designs that need bidirectional status exchange, acknowledgments, or simultaneous data collection without adding two separate interface packages. When designing around the MAX232BEASE+T, use the manufacturer pin-description table when assigning PCB nets and preserve the component orientation defined by the pin-1 marker. Decoupling connections and connector protection must follow the layout and application guidance in the MAX232 manufacturer documentation. Firmware should also treat RS-232 as an unbalanced, point-to-point interface rather than a long-distance multidrop network. This product page consolidates the known MPN, interface, package, and temperature information with application guidance, comparison criteria, and PCB-oriented design notes. It helps engineers identify the correct MAX232 family option while making the package, electrical, sourcing, and replacement requirements easier to evaluate in one place.

Permintaan RFG Kontak