Produk (46.000+)

MAX3221ECDBR - 3V-5.5V 250kbps RS-232 | Texas Instruments
MAX3221ECDBR

MAX3221ECDBR - 3V-5.5V 250kbps RS-232 | Texas Instruments

The Texas Instruments MAX3221ECDBR is a 3V to 5.5V single-channel RS-232 line driver/receiver with 250kbps data-rate capability, ±15kV IEC ESD protection, and a 16-pin SSOP package. It provides the electrical interface between an asynchronous communications controller and an RS-232 port while operating from a 3V to 5.5V supply. An RS-232 transceiver is an interface IC that converts logic-level transmit and receive signals into RS-232-compatible line levels and converts incoming RS-232 signals back into logic levels. It belongs to the RS-232 interface transceiver category, connects digital controllers to serial ports, and belongs to the broader interface IC and semiconductor hierarchy. The MAX3221ECDBR integrates one driver and one receiver for a single RS-232 channel. Its principal operating characteristics include a 3V to 5.5V supply range, a maximum data rate of 250kbps, and ±15kV IEC ESD protection. The device is specified for a 0°C to 70°C operating-temperature range and is offered in a compact 16-pin SSOP package measuring approximately 0.209 inches, or 5.30mm, wide. These characteristics make it suitable for equipment that must generate or receive RS-232 signals from a low-voltage digital system. The MAX3221ECDBR is identified as a full RS-232 single-channel transceiver and is designed around the A/EIA-232-F interface requirements described by the manufacturer. Its integrated driver, receiver, charge-pump support components, and protection features reduce the external circuitry required around a conventional asynchronous serial controller. The 3V minimum supply operation permits use with modern 3.3V system logic without requiring a 5V-only interface rail. Typical uses include single-port RS-232 adapters, industrial serial controllers, point-of-sale equipment, test instruments, data-acquisition systems, and embedded equipment that still uses an RS-232 physical interface. In these systems, the IC receives logic-level serial data for transmission and converts a remote RS-232 signal into a logic-level receive signal. The 250kbps capability supports substantially faster asynchronous links than legacy low-speed serial ports. PCB design should preserve the pin assignments and decoupling recommendations in the manufacturer datasheet. Keep the charge-pump capacitor connections, driver and receiver traces, and exposed circuit paths compact, and provide suitable protection at an accessible connector because the internal ±15kV IEC ESD rating does not remove the need for an appropriate system-level surge and ESD strategy. This page combines the verified device identity, package information, operating limits, interface characteristics, replacement candidates, and application-specific design guidance to support component selection and PCB implementation without treating the manufacturer datasheet as a substitute for careful signal-integrity and protection review.

Permintaan RFG Kontak
MAX3221ECDBRG4 - 3V-5.5V Single RS-232 Transceiver | TI
MAX3221ECDBRG4

MAX3221ECDBRG4 - 3V-5.5V Single RS-232 Transceiver | TI

The Texas Instruments MAX3221ECDBRG4 is a 3 V to 5.5 V single-channel RS-232 line driver and receiver with ±15 kV IEC 61000-4-2 ESD protection, housed in a 16-SSOP package measuring 5.30 mm wide. The device combines one driver and one receiver in a compact interface suitable for bidirectional serial-port connections. An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232-compatible voltage levels and restores incoming RS-232 signals to logic-compatible levels. It belongs to the interface IC hierarchy, where it connects digital logic or microcontrollers to legacy peripheral ports. The MAX3221E family also uses on-chip charge-pump circuitry to generate the bipolar voltage levels required by RS-232 without a separate negative supply. Key features include operation from 3 V to 5.5 V, one driver and one receiver, ±15 kV human-body-model ESD protection, ±8 kV IEC 61000-4-2 contact discharge protection, and ±15 kV air-gap discharge protection. The device uses four external 0.1 µF charge-pump capacitors. Its 16-SSOP surface-mount package supports compact industrial-control, instrumentation, and embedded equipment layouts. The MAX3221E architecture provides the electrical interface required by asynchronous serial systems. A single external capacitor at each charge-pump node supports the internal voltage conversion, while the driver presents the bipolar voltage levels expected by an RS-232 port and the receiver converts those levels back to digital logic. This integration simplifies PCB area compared with discrete level-shifting and charge-pump networks. Typical applications include debug-console connections, industrial serial adapters, point-of-sale equipment, test and measurement instruments, and embedded systems that retain an RS-232 port. For new designs, an RS-232 transceiver is most useful when an existing host or peripheral expects the physical RS-232 interface rather than USB, RS-485, or a proprietary differential link. Place the four 0.1 µF charge-pump capacitors close to their designated pins and route the driver output and receiver input traces away from sensitive analog or high-speed digital nodes. Confirm the board ground and cable shield arrangement before field deployment because connector-level ESD protection alone does not eliminate conducted noise entering through the cable. This product record combines the MAX3221ECDBRG4 electrical characteristics, package information, interface ratings, drop-in alternatives, comparison parameters, and practical layout guidance in one engineering-focused reference. It supports component selection, PCB footprint review, and RS-232 interface design without relying on a generic interface-IC overview.

Permintaan RFG Kontak
MAX3221ECPWG4 - 3V RS-232 Transceiver | Texas Instruments
MAX3221ECPWG4

MAX3221ECPWG4 - 3V RS-232 Transceiver | Texas Instruments

Texas Instruments MAX3221ECPWG4 is a single-channel RS-232 line driver and receiver operating from a 3 V to 5.5 V supply, with one driver, one receiver, and enhanced ±15 kV IEC ESD protection in a 16-pin TSSOP package. The MAX3221ECPWG4 is designed for compact serial-interface equipment requiring a single RS-232 channel and a low-voltage digital supply. An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 line levels and converts received RS-232 signals back into logic levels. The MAX3221ECPWG4 belongs to the line-transceiver hierarchy within interface ICs. Its integrated charge-pump circuitry supports single-supply operation, while the driver and receiver provide the physical layer required to connect a host, controller, or embedded system to an RS-232 port. The device operates across a 3 V to 5.5 V supply range and includes one line driver and one line receiver. According to the manufacturer description, its RS-232 pins provide protection of ±15 kV under the IEC human-body model, ±8 kV under the IEC 61000-4-2 contact-discharge test, and ±15 kV under the IEC 61000-4-2 air-gap-discharge test. These ratings are intended for protecting exposed serial-port connectors against electrostatic discharge. The MAX3221ECPWG4 uses a 16-terminal gull-wing surface-mount package with a 0.65 mm terminal pitch. The package body is identified as 4.40 mm wide, and the manufacturer markets the device as a commercial-temperature-grade part. Its single-channel architecture makes it appropriate where only one transmit and one receive path is needed, avoiding the extra drivers, receivers, and package area associated with a multi-channel transceiver. Typical uses include single-port RS-232 console connections, industrial equipment interfaces, point-of-sale terminals, data-acquisition equipment, and service or configuration ports. The 3 V to 5.5 V operating range allows the transceiver to share power with 3.3 V or 5 V system logic, reducing the need for a separate 5 V-only interface supply in many designs. PCB design should preserve the manufacturer-recommended connection and bypass layout, place charge-pump capacitors close to their associated pins, and route the RS-232 driver outputs toward the connector. The communication lines should remain away from sensitive analog or high-speed digital traces where practical. Confirm every pin function and capacitor value against the manufacturer pin description and application schematic before releasing a layout. This product page combines the MAX3221ECPWG4 electrical ratings, package characteristics, RS-232 application context, and qualified drop-in alternatives with practical PCB and protection guidance. It is structured to help engineers identify whether the single-channel 16-pin TSSOP device fits a connector, industrial-control, or embedded serial-interface design.

Permintaan RFG Kontak
MAX3221ECPWR - 250kbps Single RS-232 Transceiver | Texas Instruments
MAX3221ECPWR

MAX3221ECPWR - 250kbps Single RS-232 Transceiver | Texas Instruments

The Texas Instruments MAX3221ECPWR is a 3 V to 5.5 V single-channel RS-232 line driver and receiver capable of signaling at 250 kbps, with plus or minus 15 kV ESD protection across the serial-port pins. It is packaged in a 16-pin TSSOP and includes one line driver, one line receiver with a dedicated enable function, and a dual charge-pump circuit. The MAX3221ECPWR provides the electrical interface between an asynchronous communication controller and a serial-port connector while meeting the requirements of TIA/EIA-232-F. An RS-232 transceiver is an interface IC that converts logic-level signals from a UART or microprocessor into RS-232 voltage levels and converts incoming RS-232 signals back into CMOS-compatible logic. The RS-232 interface belongs to the interface IC hierarchy, where it bridges digital controllers, embedded systems, industrial equipment, and external serial peripherals. The MAX3221E family is designed for single-channel links where a second driver and receiver would add cost and board area without improving the application. The device operates from a single 3 V to 5.5 V supply, making it suitable for both 3.3 V and 5 V systems. Its internal dual charge-pump circuit generates the positive and negative voltages required by the TIA/EIA-232-F interface without a separate bipolar supply. Data rates up to 250 kbps support legacy serial communication, industrial control links, data acquisition equipment, configuration ports, and service interfaces. Plus or minus 15 kV ESD protection strengthens the serial connector against electrostatic discharge. The receiver includes a dedicated enable function that can place the receiver in a high-impedance state, while the driver-side enable structure supports controlled interface operation. The MAX3221ECPWR combines these functions in a compact 16-pin TSSOP, allowing a complete RS-232 port to be implemented with a small PCB footprint. Its single-channel architecture is appropriate for point-to-point serial links rather than multi-drop RS-485 networks. Typical uses include industrial equipment interfaces, laboratory instrumentation, cash-register systems, embedded control panels, and legacy peripheral connections. The 250 kbps maximum data rate exceeds the throughput of many legacy RS-232 ports while retaining compatibility with established TIA/EIA-232-F designs. The 3 V to 5.5 V operating range also allows the same interface topology to be used across mixed-voltage systems. When laying out the circuit, place the charge-pump capacitors and supply bypass capacitor close to their corresponding pins, and route the driver output and receiver input away from noisy digital signals. Use the manufacturer datasheet pin-description table to verify signal assignments and the exposed ground connection before assigning PCB tracks.

Permintaan RFG Kontak
MAX3221ECTE+ - 3V/5V RS-232 Transceiver | Maxim Integrated
MAX3221ECTE+

MAX3221ECTE+ - 3V/5V RS-232 Transceiver | Maxim Integrated

The Maxim Integrated MAX3221ECTE+ is a 3 V to 5.5 V RS-232 transceiver supporting data rates up to 250 kbps in a 16-pin TQFN package measuring 5 mm by 5 mm. The device combines one RS-232 transmitter, one receiver, ±15 kV ESD protection, and automatic shutdown and wakeup functions in a single integrated interface IC. It is designed for compact equipment requiring a standards-compliant EIA/TIA-232 connection between a host UART and an external data cable. An RS-232 transceiver is an interface IC that converts logic-level UART signals into differential, bipolar RS-232 levels and converts received RS-232 levels back into logic-compatible signals. The MAX3221ECTE+ operates from a single 3.0 V to 5.5 V supply, making it suitable for systems using either 3.3 V or 5 V logic. Its automatic shutdown circuitry reduces supply demand when the interface is inactive, while wakeup support allows operation to resume when valid serial data arrives. The principal electrical features include a maximum data rate of 250 kbps, ±15 kV ESD protection, and a shutdown current of 1 µA. The integrated protection is particularly valuable in industrial control, instrumentation, and data-acquisition equipment where an RS-232 connector may be exposed to electrostatic discharge. The device also supports EIA/TIA-232 and V.28/V.24 communication requirements while presenting a compact, board-space-efficient interface to the host controller. MAX3221ECTE+ combines a transmitter and receiver in one package, avoiding separate logic-level conversion devices for each direction. The 5 mm by 5 mm TQFN footprint supports dense control boards, but its exposed pad requires careful PCB layout and adequate thermal dissipation. Charge-pump circuitry internally develops the positive and negative RS-232 voltage levels needed by the transmitter, so the application circuit requires the external components and connections specified by the manufacturer datasheet. Typical uses include industrial serial controllers, test and measurement equipment, POS terminals, embedded serial bridges, and isolated or long-distance RS-232 links. At 250 kbps, the interface is fast enough for moderate-speed telemetry and configuration traffic while maintaining compatibility with conventional RS-232 ports. For designs operating from 5 V, the wide 3.0 V to 5.5 V supply range also provides flexibility when the host uses a lower-voltage rail. Use the manufacturer pin description and application circuit when assigning the TQFN land pattern, connecting the exposed pad, and placing bypass or charge-pump capacitors. Keep the interface path away from sensitive analog signals, provide a low-impedance ground connection, and keep external cables and connectors as short as practical. ESD protection reduces connector risk but does not replace correct grounding, shielding, and surge-protection design. This page consolidates the device specifications, verified package information, sourcing guidance, drop-in alternatives, and practical RS-232 layout considerations. It also distinguishes the electrically useful alternatives from package or temperature options that require additional design review before substitution.

Permintaan RFG Kontak
MAX3221ECTE+T - 250kbps RS-232 Transceiver | Analog Devices
MAX3221ECTE+T

MAX3221ECTE+T - 250kbps RS-232 Transceiver | Analog Devices

The Analog Devices MAX3221ECTE+T is a single-channel RS-232 transceiver rated for data rates up to 250 kbps, operating from a 3.0 V to 5.5 V supply in a 16-pin TQFN package. It provides ±15 kV ESD protection and uses the MAX3221 family AutoShutdown feature to reduce supply current to 1 µA when no valid receiver signal is detected. An RS-232 transceiver is an interface integrated circuit that converts logic-level signals between a host or controller and a RS-232 port. Within the interface hierarchy, the MAX3221ECTE+T belongs to the RS-232 transceiver class, then to line-driver and line-receiver circuits, and ultimately to the broader communication-interface and semiconductor categories. Its charge-pump circuitry generates the bipolar voltage levels required by the RS-232 standard without a separate negative supply. Key features include a 250 kbps maximum data rate, a 3.0 V to 5.5 V operating range, ±15 kV ESD protection, and 1 µA shutdown supply current. The device provides one transmit channel and one receive channel, making it suitable for compact point-to-point serial links. AutoShutdown reduces power consumption when the receiver detects no valid RS-232 activity, while automatic wakeup permits the circuit to resume operation when a valid signal returns. The MAX3221 architecture integrates the transmitter, receiver, interface control, and charge-pump functions into one package. This consolidation simplifies PCB design by reducing the number of external interface components. The transmitter converts TTL/CMOS logic levels into RS-232 levels, while the receiver converts bipolar RS-232 inputs into a CMOS-compatible output. Internal protection and controlled slew behavior support reliable communication over cable connections exposed to electrostatic discharge. Typical applications include industrial serial consoles, data-acquisition equipment, point-of-sale terminals, test and measurement instruments, and embedded control systems that require an RS-232 port with automatic power management. The 3.0 V minimum supply voltage also makes the device suitable for mixed 3.3 V and 5 V systems when the interface requires full RS-232 electrical levels rather than TTL signaling. When laying out the circuit, place the charge-pump capacitors and the interface bypass capacitor close to their associated pins, and route the RS-232 connector traces away from sensitive analog or high-speed digital nets. Confirm the logic levels and polarity of the connected host because RS-232 is a single-ended, inverted bipolar interface and is not directly interchangeable with TTL UART signaling.

Permintaan RFG Kontak
MAX3221ECUE+T - 250kbps RS-232 Transceiver | Analog Devices
MAX3221ECUE+T

MAX3221ECUE+T - 250kbps RS-232 Transceiver | Analog Devices

Analog Devices MAX3221ECUE+T is a 3.0V to 5.5V single-channel RS-232 transceiver with one driver and one receiver, a 250kbps maximum data rate, ±15kV ESD protection, and automatic shutdown and wakeup in a 16-pin TSSOP package. It is designed for compact serial interfaces that require reliable EIA/TIA-232 signal conditioning from a 3.3V or 5V supply. An RS-232 transceiver is an interface IC that converts logic-level UART signals between a host controller and a cable-based RS-232 port. It belongs to the RS-232 transceiver category, which sits within the broader hierarchy of interface ICs, communication semiconductors, and discrete analog-and-digital interface components. Unlike logic-level UART links, the RS-232 side uses bipolar voltage levels and requires controlled edge rates to meet communication and electromagnetic-interference requirements. The MAX3221ECUE+T combines a transmitter and receiver in one compact package. Key features include operation from 3.0V to 5.5V, data rates up to 250kbps, ±15kV ESD protection, and a low 1µA shutdown supply current. Its AutoShutdown function reduces power consumption when the receiver does not detect a valid signal. These characteristics make it useful where energy use, board area, and port reliability are important. Maxim's charge-pump architecture generates the positive and negative voltages required by the RS-232 transmitter while the device operates from a single low-voltage supply. Four small external capacitors support this function. The integrated transmitter adds controlled signal shaping, while the receiver translates the bipolar RS-232 input into a CMOS-compatible logic level for the host UART. Automatic wakeup supports systems that periodically power their communications port. Typical uses include industrial control equipment, point-of-sale terminals, instrumentation, maintenance equipment, and embedded serial-port adapters. The device is also appropriate for portable or industrial systems that need a single RS-232 channel rather than the multiple drivers and receivers offered by larger interface families. A 3.3V system can use the same part as a 5V system, subject to the external interface and logic-level requirements of the connected controller. PCB layout is critical because the charge-pump capacitors must be placed close to their associated pins, while the RS-232 connector path should remain as short and separated from sensitive circuitry as practical. Keep the connector-side return path continuous, route driver and receiver traces away from switching nodes, and use the device pin-description table when assigning connector and logic nets. This product record combines device specifications, verified source links, package information, application guidance, and engineering-focused comparisons. It also identifies genuine same-package alternatives and explains when their electrical or qualification differences matter, helping designers evaluate replacement options without overlooking board-layout or operating constraints.

Permintaan RFG Kontak
MAX3221EEAE+ - 250kbps RS-232 Transceiver | Analog Devices
MAX3221EEAE+

MAX3221EEAE+ - 250kbps RS-232 Transceiver | Analog Devices

Analog Devices MAX3221EEAE+ is a single-driver, single-receiver RS-232 transceiver designed for portable and embedded equipment. It operates from 3.0V to 5.5V, supports data rates up to 250kbps, and is housed in a 16-pin SSOP package. The MAX3221E family also provides automatic shutdown and wake-up functions plus enhanced electrostatic-discharge protection on all transmitter outputs and receiver inputs. An RS-232 transceiver is an interface IC that converts a logic-level UART signal into RS-232 voltage levels and converts an incoming RS-232 signal back into CMOS-compatible logic. It belongs to the communication-interface hierarchy: RS-232 transceiver, line-driver and receiver interface, interface IC, and semiconductor. This bidirectional conversion allows a modern microcontroller or processor to communicate with legacy printers, industrial equipment, data terminals, and other RS-232 systems. The MAX3221EEAE+ combines a 3.0V to 5.5V supply range with a maximum data rate of 250kbps. Its AutoShutdown feature reduces supply current to 1uA when the system is inactive, helping conserve power in handheld and battery-operated equipment. Enhanced ESD protection rated to 15kV adds protection for the physical RS-232 connector interface, where cables can introduce electrostatic discharge into the equipment. The device uses a charge-pump-assisted interface architecture to generate the positive and negative voltages required by RS-232 while operating from a single low-voltage supply. One transmitter and one receiver support one complete bidirectional communication channel. The MAX3221 is the 16-pin member of the MAX3221E, MAX3223E, and MAX3243E interface family, while MAX3223E and MAX3243E provide additional driver or receiver channels for multi-port designs. Typical uses include handheld test equipment, portable data-collection systems, industrial serial adapters, point-of-sale terminals, and equipment with a legacy RS-232 port. The 16-pin SSOP package is useful when a compact interface is required without adding a larger multi-channel transceiver. The combination of low-voltage operation, 250kbps performance, AutoShutdown, and 15kV ESD protection makes the part appropriate for portable equipment that must maintain reliable serial connectivity. Designers should follow the manufacturer datasheet for capacitor selection, charge-pump layout, and RS-232 connector protection. Place the required charge-pump capacitors close to their associated pins, route the interface nets away from sensitive analog circuitry, and provide the specified bypass capacitance at the supply pins. The external RS-232 connector should also receive suitable protection appropriate to the cable length and environmental exposure. This page combines manufacturer specifications, packaging information, practical interface-design guidance, and technically meaningful drop-in comparisons. These engineering details help shorten component selection and PCB-layout work while making the trade-offs among the MAX3221E grade and package-ordering options easier to assess.

Permintaan RFG Kontak
MAX3221EEAE+G071 - 250kbps RS-232 Transceiver | Maxim
MAX3221EEAE+G071

MAX3221EEAE+G071 - 250kbps RS-232 Transceiver | Maxim

Maxim Integrated MAX3221EEAE+G071 is a single-channel RS-232 transceiver IC with 3.0V to 5.5V operation, a maximum data rate of 250kbps, 1uA shutdown current, and ±15kV ESD protection. The device contains one line driver and one line receiver and is packaged in a 16-SSOP package. An RS-232 transceiver is an interface IC that translates logic-level signals between a computer or embedded controller and a RS-232 communications link. The driver converts a low-voltage digital signal into RS-232 levels, while the receiver converts an incoming RS-232 signal into a logic-compatible signal. In the electronics hierarchy, the MAX3221EEAE+G071 belongs to the interface IC class and specifically implements an EIA/TIA-232 communications interface with automatic shutdown and wake-up behavior. The 3.0V to 5.5V supply range allows operation from regulated 3.3V and 5V systems. Its 250kbps maximum data rate supports legacy serial links used in point-to-point equipment, industrial controllers, data-acquisition systems, and service interfaces. Automatic shutdown reduces supply current to 1uA when no valid receiver signal is detected, helping conserve power in systems that spend substantial time idle. The integrated ±15kV ESD protection strengthens the external serial interface against electrostatic discharge events. The MAX3221EEAE+G071 uses Maxim Integrated's charge-pump interface architecture to generate the bipolar voltage levels required by RS-232 from a single low-voltage supply. One transmitter and one receiver make it suitable for designs requiring a single serial data path rather than multiple RS-232 channels. Automatic wake-up allows the device to return to operating mode after a valid signal appears, reducing the need for external power-management logic around the serial port. Typical applications include industrial control equipment, instrumentation, data-logging systems, configuration ports, service and debug interfaces, and embedded serial adapters. It is particularly useful where low standby consumption is important and where the host operates from either 3.3V or 5V power. The 16-SSOP package also supports compact board layouts where a larger SOIC or dual-channel transceiver would be unnecessary. When laying out a board, place the charge-pump capacitors and the RS-232 interface components directly beside the IC according to the manufacturer's pin-description and typical-application diagrams. Route the exposed RS-232 connector pins away from sensitive low-level circuitry, and provide the specified power and ground-plane connections to minimize return-path disturbance. This product page combines interface specifications, package details, application guidance, and a parameter-focused comparison with compatible RS-232 transceiver options. It also identifies design considerations for power management, ESD protection, signal routing, and component replacement so engineers can evaluate the device before integrating it into a new board.

Permintaan RFG Kontak
MAX3221EEAE+TG071 - 250kbps RS-232 Transceiver | Maxim
MAX3221EEAE+TG071

MAX3221EEAE+TG071 - 250kbps RS-232 Transceiver | Maxim

The Maxim Integrated MAX3221EEAE+TG071 is a single-channel RS-232 line-driver and receiver transceiver rated for 250 kbps, operating from a 3.0 V to 5.5 V supply in a 16-pin SSOP package. Its principal features include ±15 kV ESD protection, approximately 1 µA shutdown current, and automatic shutdown and wake-up behavior. An RS-232 transceiver is an interface integrated circuit that converts logic-level signals from a host, controller, or embedded system into RS-232 levels and converts incoming RS-232 signals back into logic-compatible levels. In the product hierarchy, the MAX3221EEAE+TG071 is an RS-232 transceiver within the interface IC and communications-semiconductor categories. The device includes one transmitter and one receiver, making it suitable for point-to-point serial links. Its 3.0 V to 5.5 V operating range supports both 3.3 V and 5 V systems. Automatic shutdown reduces supply consumption when no valid receiver activity is detected, while automatic wake-up restores operation after valid data returns. The ±15 kV ESD protection improves ruggedness on exposed cable and connector interfaces. The MAX3221E family uses an on-chip charge pump and four small external capacitors to generate the bipolar voltage required by an RS-232 transmitter from a single positive supply. This arrangement eliminates the need for a separate negative supply rail. The MAX3221 variant has one driver and one receiver in 16 pins, distinguishing it from the two-channel MAX3223 and the higher-channel-count MAX3243. Typical applications include industrial equipment serial ports, configuration and programming interfaces, point-of-sale terminals, barcode and data-acquisition equipment, laboratory instruments, and embedded control systems. The 250 kbps capability suits legacy asynchronous RS-232 communication where full-duplex point-to-point connectivity is required rather than a multi-drop bus. When laying out the PCB, keep the four charge-pump capacitors close to their specified pins and provide the receiver interface with appropriate ESD protection and controlled return paths. Confirm that the external connector, cable, and logic controller can support the selected signaling rate before treating 250 kbps as an end-to-end guaranteed throughput. This page combines the exact MAX3221EEAE+TG071 ordering code with package details, functional comparisons, application guidance, and design considerations. It also distinguishes true pin-compatible replacements from similarly packaged devices whose channel count or data rate makes them unsuitable for a direct PCB substitution.

Permintaan RFG Kontak
MAX3221EEAE+TG1Z - 250kbps RS-232 Transceiver | Analog Devices
MAX3221EEAE+TG1Z

MAX3221EEAE+TG1Z - 250kbps RS-232 Transceiver | Analog Devices

The Analog Devices MAX3221EEAE+TG1Z is a single-supply EIA/TIA-232 RS-232 transceiver with one driver and one receiver, operating from 3.0V to 5.5V, supporting data rates up to 250kbps, and featuring enhanced electrostatic discharge protection rated at plus or minus 15kV. The device is packaged in a 16-pin SSOP package and includes automatic shutdown and wake-up features. An RS-232 transceiver is an interface IC that translates logic-level signals into RS-232 voltage levels and converts incoming RS-232 signals back into digital logic levels. It belongs to the broader hierarchy of interface ICs, serial transceivers, communication interfaces, and semiconductor devices. The MAX3221EEAE+TG1Z is intended for equipment that needs one serial channel with low supply voltage, automatic power management, and stronger ESD protection than a basic RS-232 interface. The principal features include a 3.0V to 5.5V operating supply range, operation at up to 250kbps, a 1uA shutdown current, plus or minus 15kV ESD protection, and automatic shutdown and wake-up. These characteristics suit compact industrial controls, test equipment, point-of-sale terminals, and embedded serial ports. The single driver and single receiver arrangement also makes the MAX3221 a compact choice when one RS-232 link is sufficient. MAX3221E-family devices use charge-pump circuitry to generate the positive and negative voltage levels required by RS-232, allowing operation from a single low-voltage supply. The automatic shutdown function reduces supply current when the interface is inactive, while wake-up support helps the system recover without continuous high-power operation. The 16-pin SSOP outline supports conventional surface-mount assembly and compact board layouts. Typical applications include industrial serial adapters, programmable-logic-controller communication, barcode and point-of-sale equipment, instrumentation, and embedded control systems. For designs using a 3.3V or 5V logic supply, the MAX3221EEAE+TG1Z can provide a protected RS-232 connection without a separate negative power rail. Its one-channel architecture should be selected when the system does not require multiple RS-232 drivers or receivers. The main design consideration is ensuring that the external charge-pump capacitors, transceiver signal lines, and logic-side connections follow the pin-description and application-circuit guidance in the manufacturer datasheet. Place the charge-pump capacitors close to their specified pins and preserve the recommended protection-network arrangement on external RS-232 connectors. Confirm that the selected logic levels and supply voltage match the host controller. This page combines the manufacturer product information, package details, verified comparison candidates, and practical interface-design guidance. It also identifies where detailed pin assignments, environmental ratings, and lifecycle-specific technical parameters should be confirmed in the official MAX3221 documentation.

Permintaan RFG Kontak
MAX3221EEAE-T - 250kbps RS-232 Transceiver | Analog Devices
MAX3221EEAE-T

MAX3221EEAE-T - 250kbps RS-232 Transceiver | Analog Devices

Analog Devices MAX3221EEAE-T is a 3.0V to 5.5V powered RS-232 transceiver with one driver, one receiver, automatic shutdown and wakeup, and ±15kV ESD protection in a 16-pin SSOP package. It supports data rates up to 250kbps and is packaged for tape-and-reel production handling. An RS-232 transceiver is an interface IC that converts logic-level serial signals between a host or controller and the voltage-defined RS-232 bus. The MAX3221EEAE-T belongs to the RS-232 interface hierarchy, where a transceiver combines a transmitter for outbound data with a receiver for inbound data. Its single-driver, single-receiver arrangement is intended for point-to-point serial links and portable equipment requiring compact implementation. The MAX3221EEAE-T operates from 3.0V to 5.5V, supports signaling rates through 250kbps, and provides ±15kV ESD protection. AutoShutdown reduces supply current to 1µA when no valid receiver signal is detected, while automatic wakeup reactivates the interface when valid data returns. These characteristics make the device useful where serial connectivity must coexist with strict power-consumption limits. Internally, the device combines its RS-232 driver and receiver functions with on-board charge-pump support, enabling operation from a single 3.0V to 5.5V supply rather than a bipolar ±5V source. The enhanced ESD protection is intended to improve tolerance to electrostatic discharge encountered during cable connection, removal, and industrial or commercial handling. Typical uses include industrial serial adapters, data-acquisition equipment, POS terminals, barcode scanners, test instruments, and embedded systems that exchange data with RS-232 peripherals. The 250kbps capability suits moderate-speed command and control links, while the low-power shutdown behavior benefits portable or intermittently connected systems. PCB design should account for the 16-pin SSOP footprint, place the charge-pump capacitors as close as practical to their designated pins, and keep the RS-232 driver outputs and receiver inputs away from sensitive high-speed traces. Confirm the capacitor values, supply bypassing, and charge-pump layout against the manufacturer datasheet before releasing the PCB. This product page combines the manufacturer family specifications, exact ordering information, structured alternatives, package details, and practical interface-design guidance to support component selection and board-layout planning.

Permintaan RFG Kontak
MAX3221EEAE/GG8 - 250kbps RS-232 Transceiver | Analog Devices
MAX3221EEAE/GG8

MAX3221EEAE/GG8 - 250kbps RS-232 Transceiver | Analog Devices

The Analog Devices MAX3221EEAE/GG8 is a 3.0V to 5.5V powered, single-transmitter/single-receiver RS-232 transceiver with automatic shutdown and wake-up, 250kbps data-rate capability, and ±15kV ESD protection in a 16-pin SSOP package. It is designed for low-power serial-interface systems requiring EIA/TIA-232 and V.28/V.24-compatible signal levels. An RS-232 transceiver is an interface IC that converts logic-level digital signals into RS-232 differential voltage levels and converts incoming RS-232 signals back into logic-compatible levels. The MAX3221E family combines one transmit channel and one receive channel with low-power 3V operation, making it suitable for embedded equipment, industrial controllers, point-of-sale terminals, and other systems that exchange data over short-distance serial links. The device operates from a 3.0V to 5.5V supply, supports data rates up to 250kbps, and includes enhanced electrostatic-discharge protection of ±15kV. Automatic shutdown and wake-up functions reduce supply current when the interface is inactive, while transmitter and receiver enable pins support controlled power management in systems with multiple peripheral connections. MAX3221EEAE/GG8 uses the MAX3221E single-channel architecture, providing one RS-232 transmitter and one receiver rather than the multiple-channel arrangement used by some larger transceivers. Its 16-pin SSOP package supports compact PCB layouts, and the industrial-temperature ordering option is identified by the GG8 package and temperature suffix. Typical applications include serial adapters, test equipment, industrial control interfaces, barcode scanners, embedded data-collection systems, and communication links between a host controller and an external RS-232 peripheral. The 250kbps capability is appropriate for legacy serial protocols and control traffic that do not require modern high-speed differential interfaces. When designing the circuit, place the charge-pump capacitors and interface-protection components close to the device and route the RS-232 connector signals away from sensitive analog and digital signal paths. Confirm the supply voltage, logic levels, connector pinout, and charge-pump capacitor values against the manufacturer datasheet before releasing the PCB layout. This page combines the device specifications, package information, application guidance, design considerations, and drop-in alternatives into a practical engineering reference for selecting and implementing the MAX3221EEAE/GG8.

Permintaan RFG Kontak
MAX3221EETE+T - 250kbps AutoShutdown RS-232 | Analog Devices
MAX3221EETE+T

MAX3221EETE+T - 250kbps AutoShutdown RS-232 | Analog Devices

The Analog Devices MAX3221EETE+T is a 3.0V to 5.5V RS-232 transceiver with one transmitter and one receiver, 250 kbps operation, and ±15 kV ESD protection in a 16-pin TQFN package with an exposed pad. The MAX3221E family also provides automatic shutdown and wakeup, with supply current reduced to 1 µA when no valid receiver signal is detected. An RS-232 transceiver is an interface IC that converts between single-ended logic-level signals and the bipolar, inverted signaling used by RS-232 equipment. It belongs to the interface IC hierarchy, where it bridges UART, UART-compatible controller, and peripheral circuitry with legacy or industrial communications ports. The MAX3221E supports the EIA/TIA-232 and V.28/V.24 signaling requirements identified for the MAX3221E family. The MAX3221EETE+T combines a 250 kbps data rate with a 3.0V to 5.5V supply range, allowing operation alongside both 3.3V and 5V digital systems. Its AutoShutdown circuit recognizes when connected equipment is powered off or no valid signal appears on a receiver input, then disables the internal charge pump and drivers to reduce power consumption. Automatic wakeup restores operation when a valid signal returns. The enhanced electrostatic-discharge design protects the transmitter outputs and receiver inputs against ±15 kV ESD events. This protection is particularly useful for cables connected to external equipment, where electrostatic discharge can enter through a connector rather than through the protected logic-side pins. The device converts one TTL or CMOS data channel into an RS-232 signal and converts one inbound RS-232 signal back into a logic-level output. Typical uses include industrial serial adapters, test and measurement equipment, point-of-sale terminals, security systems, and embedded systems that retain an RS-232 port. The 250 kbps capability supports substantially faster communication than conventional low-speed RS-232 links, while the small TQFN package suits compact control boards. Systems requiring more than one RS-232 port normally require additional transceiver channels or a multichannel interface family. When laying out the PCB, place the charge-pump capacitors and interface capacitors close to their designated pins, connect the exposed thermal pad to the ground plane, and keep the RS-232 traces away from sensitive clock, sensor, and analog signals. Confirm capacitor values, voltage ratings, and exposed-pad soldering requirements against the manufacturer datasheet before fabrication. This product page combines the manufacturer interface specifications with package, sourcing, application, and replacement guidance. It also highlights practical ESD, layout, power-management, and signal-integrity considerations that engineers can apply when integrating the MAX3221EETE+T into a compact RS-232 circuit.

Permintaan RFG Kontak
MAX3221EEUE+T - 250kbps RS-232 Transceiver | Analog Devices
MAX3221EEUE+T

MAX3221EEUE+T - 250kbps RS-232 Transceiver | Analog Devices

The Analog Devices MAX3221EEUE+T is a single-transceiver RS-232 interface IC with one transmitter and one receiver, a maximum data rate of 250 kbps, and operation from 3.0 V to 5.5 V. It is packaged in a 16-pin TSSOP and includes enhanced electrostatic-discharge protection rated at ±15 kV. The MAX3221E family also provides automatic shutdown and wake-up behavior to reduce supply consumption when the connected RS-232 link is inactive. An RS-232 transceiver is an interface IC that converts between single-ended logic-level signals and the bipolar voltage levels used by RS-232 equipment. It belongs to the interface IC hierarchy alongside UART transceivers, line drivers, and level shifters. The MAX3221EEUE+T is designed for equipment that requires one bidirectional RS-232 connection, such as configuration ports, service interfaces, point-of-sale terminals, and industrial control systems. Key operating characteristics include a 3.0 V to 5.5 V supply range, full-duplex operation, and data rates up to 250 kbps. Its enhanced ESD protection helps the interface withstand electrostatic discharge on exposed RS-232 connections. AutoShutdown reduces the supply current to approximately 1 µA when no valid receiver signal is detected, while automatic wake-up returns the device to an active state when a valid signal appears. The MAX3221E/MAX3223E/MAX3243E family supports EIA/TIA-232 and V.28/V.24 communication interfaces. The MAX3221EEUE+T combines one driver and one receiver in a compact 16-pin TSSOP, making it suitable for space-constrained designs that require a single RS-232 port. Its 250 kbps capability supports faster service and data links than conventional low-speed RS-232 implementations. Typical applications include industrial controller service ports, point-of-sale and retail equipment, test systems, security consoles, and embedded control boards. The device is particularly useful when the system must operate from a 3.3 V supply while communicating with a legacy RS-232 peripheral or computer port. PCB design should keep the RS-232 connector and protection network close to the transceiver while maintaining separation from sensitive analog or high-speed digital traces. Follow the manufacturer datasheet for external charge-pump capacitor values, receiver and transmitter connection details, and the complete 16-pin assignment before finalizing the layout. This page combines the exact ordering information, RS-232 operating characteristics, package details, sourcing options, and application guidance needed to evaluate the MAX3221EEUE+T for a new interface design.

Permintaan RFG Kontak
MAX3221EIDB - 250kbps 3V-5.5V RS-232 Transceiver | TI
MAX3221EIDB

MAX3221EIDB - 250kbps 3V-5.5V RS-232 Transceiver | TI

Texas Instruments MAX3221EIDB is a single-channel RS-232 line driver and receiver operating from a single 3V to 5.5V supply at up to 250kbps, with one transmitter, one receiver, and a 16-pin SSOP package. Its RS-232 connector-side pins provide IEC 61000-4-2 ESD protection, and the device meets TIA/EIA-232-F requirements. An RS-232 transceiver is an interface IC that converts logic-level signals between a host controller and a serial port. The MAX3221E combines a differential line driver, receiver, dual charge-pump circuit, and automatic signal generation in one package. It occupies the interface ICs level within the broader communications and industrial-control hierarchy, where reliable voltage translation, electrostatic-discharge protection, and economical PCB integration are important. The device provides one full-duplex RS-232 channel with a maximum data rate of 250kbps. Its single 3V to 5.5V supply operation allows use with both 3.3V and 5V systems. The integrated charge pump produces the bipolar voltage levels required by RS-232 while reducing the number of external components to four small capacitors. IEC 61000-4-2 protection on the serial-port connection pins adds protection where cables enter an enclosure. The MAX3221E implements one driver and one receiver with a dedicated receiver-enable function. It provides the electrical interface between an asynchronous communication controller and an RS-232 connector while satisfying TIA/EIA-232-F requirements. This architecture suits point-to-point links that do not require multiple RS-232 channels, such as service-console, configuration-port, industrial-controller, and legacy peripheral connections. Typical applications include single-port RS-232 adapters, programmable logic controller service interfaces, industrial control equipment, test fixtures, and embedded systems that retain a legacy serial connector. The 16-pin SSOP package supports compact, surface-mount PCB construction, while the 250kbps rate is suitable for moderate-speed asynchronous data transfer rather than high-bandwidth protocols. Designers should follow the manufacturer’s recommended capacitor values and placement guidance for the charge-pump circuit. Keep the external capacitors close to their designated pins, route the RS-232 connector-side nets away from sensitive logic, and use a suitable protection network when cables extend beyond the protected board boundary. Verify that the host voltage levels and connector pin assignment match the selected logic family. This product page combines the MAX3221EIDB electrical characteristics, package details, available drop-in alternatives, comparison parameters, and application-specific design guidance. It is intended to accelerate component selection, PCB planning, and RS-232 interface qualification without requiring the reader to reconstruct the design trade-offs from separate listings.

Permintaan RFG Kontak
MAX3221EIDBG4 - Single-Channel 3V RS-232 Transceiver | Texas Instruments
MAX3221EIDBG4

MAX3221EIDBG4 - Single-Channel 3V RS-232 Transceiver | Texas Instruments

Texas Instruments MAX3221EIDBG4 is a single-channel RS-232 line transceiver with one driver and one receiver, a 3 V to 5.5 V supply range, and operation up to 250 kbps. The device is housed in a 16-pin SSOP package. Its serial-port pins provide ±15 kV ESD protection, and the circuit includes a dual charge-pump supply for compliant RS-232 signal levels. An RS-232 transceiver is an interface IC that translates logic-level signals between a host or controller and a serial connector. The transmitter converts TTL or CMOS logic into bipolar RS-232 levels, while the receiver converts the bipolar signal back into logic-compatible levels. The MAX3221 therefore connects an asynchronous communication controller to a serial port without requiring external RS-232 line drivers or receivers. The MAX3221EIDBG4 offers a flexible 3 V to 5.5 V operating supply and a maximum signaling rate of 250 kbps. According to the manufacturer datasheet, the device meets TIA/EIA-232-F requirements and incorporates a dual charge-pump circuit. Dedicated receiver enable support allows the receiver to be controlled when the serial interface is not active. The E and I ordering designations identify the industrial-temperature version in the SSOP package family, while G4 identifies the tape-and-reel shipping format. The 16-pin SSOP has a stated body width of approximately 5.30 mm and a package width of 0.209 inch. Lead-free status and industrial temperature grade are explicitly listed for this device. Typical uses include industrial serial adapters, point-to-point RS-232 links, embedded data acquisition equipment, maintenance interfaces, and legacy peripheral connections. A single transceiver is appropriate when only one RS-232 channel is needed. Multiport systems generally require additional transceiver channels or a multi-channel interface IC. PCB design should keep charge-pump capacitors and RS-232 connector protection close to the relevant pins. Confirm the complete pin assignment, exposed supply requirements, and recommended capacitor values in the manufacturer datasheet before releasing a layout. External transient protection may still be required when the connector is exposed to severe industrial surge environments. This product page combines the device specifications, package information, application guidance, lifecycle information, and verified cross-reference findings for faster engineering review. It also highlights the limitation that no independently verified, same-package drop-in alternatives could be confirmed without risking an incorrect PCB substitution.

Permintaan RFG Kontak
MAX3221EIDBR - 250kbps 3V-5.5V RS-232 Transceiver | TI (Tape & Reel)
MAX3221EIDBR

MAX3221EIDBR - 250kbps 3V-5.5V RS-232 Transceiver | TI (Tape & Reel)

Texas Instruments MAX3221EIDBR is a single-channel RS-232 line driver and receiver operating from a single 3V to 5.5V supply at up to 250kbps, with one transmitter, one receiver, and a 16-pin SSOP package. Its RS-232 connector-side pins provide IEC 61000-4-2 ESD protection, and the device meets TIA/EIA-232-F requirements. An RS-232 transceiver is an interface IC that converts logic-level signals between a host controller and a serial port. The MAX3221E combines a differential line driver, receiver, dual charge-pump circuit, and automatic signal generation in one package. It occupies the interface ICs level within the broader communications and industrial-control hierarchy, where reliable voltage translation, electrostatic-discharge protection, and economical PCB integration are important. The device provides one full-duplex RS-232 channel with a maximum data rate of 250kbps. Its single 3V to 5.5V supply operation allows use with both 3.3V and 5V systems. The integrated charge pump produces the bipolar voltage levels required by RS-232 while reducing the number of external components to four small capacitors. IEC 61000-4-2 protection on the serial-port connection pins adds protection where cables enter an enclosure. The MAX3221E implements one driver and one receiver with a dedicated receiver-enable function. It provides the electrical interface between an asynchronous communication controller and an RS-232 connector while satisfying TIA/EIA-232-F requirements. This architecture suits point-to-point links that do not require multiple RS-232 channels, such as service-console, configuration-port, industrial-controller, and legacy peripheral connections. Typical applications include single-port RS-232 adapters, programmable logic controller service interfaces, industrial control equipment, test fixtures, and embedded systems that retain a legacy serial connector. The 16-pin SSOP package supports compact, surface-mount PCB construction, while the 250kbps rate is suitable for moderate-speed asynchronous data transfer rather than high-bandwidth protocols. Designers should follow the manufacturer’s recommended capacitor values and placement guidance for the charge-pump circuit. Keep the external capacitors close to their designated pins, route the RS-232 connector-side nets away from sensitive logic, and use a suitable protection network when cables extend beyond the protected board boundary. Verify that the host voltage levels and connector pin assignment match the selected logic family. This product page combines the MAX3221EIDBR electrical characteristics, package details, available drop-in alternatives, comparison parameters, and application-specific design guidance. It is intended to accelerate component selection, PCB planning, and RS-232 interface qualification without requiring the reader to reconstruct the design trade-offs from separate listings.

Permintaan RFG Kontak
MAX3221EIDBRG4 - 3V-5.5V RS-232 Transceiver | Texas Instruments
MAX3221EIDBRG4

MAX3221EIDBRG4 - 3V-5.5V RS-232 Transceiver | Texas Instruments

The Texas Instruments MAX3221EIDBRG4 is a 3 V to 5.5 V single-channel RS-232 line driver and receiver with a 250 kbps data rate and ±15 kV IEC ESD protection on the RS-232 pins. The device is packaged in a 16-pin SSOP with a 5.30 mm body width and is supplied in the G4 lead-free, tape-and-reel configuration. An RS-232 transceiver is an interface IC that combines a differential line driver with a line receiver. It converts logic-level signals into RS-232-compatible levels and converts incoming RS-232 signals back into logic levels. Within the interface hierarchy, the MAX3221EIDBRG4 belongs to the RS-232 transceiver family of interface ICs and is designed for short-distance point-to-point serial links using the RS-232 protocol. The principal operating features include a 3 V to 5.5 V supply range, one driver and one receiver, and a maximum signaling rate of 250 kbps. The RS-232 pins are protected to ±15 kV under the Human Body Model and to ±8 kV under the IEC 61000-4-2 contact-discharge test. Air-discharge protection reaches ±15 kV, providing a substantial margin for exposed serial ports that may encounter electrostatic discharge. This single-channel architecture is useful when a system requires one bidirectional RS-232 port without allocating space for a multi-channel transceiver. The broad supply-voltage range allows operation from 3.3 V or 5 V system rails, while the integrated line-driver and receiver circuitry reduces the number of external interface components. The SSOP-16 package provides a practical option for compact industrial, instrumentation, and embedded-control equipment. Typical applications include configuration-port links in industrial equipment, serial adapters, point-of-sale terminals, laboratory instruments, maintenance interfaces, and embedded systems that exchange commands or diagnostic data with a host computer. At 250 kbps, the interface is appropriate for moderate-speed command and control traffic rather than high-bandwidth bulk transfer. Designers should use the charge-pump capacitor values and external driver/receiver capacitors specified by the manufacturer datasheet. Keep the RS-232 connector-side traces away from sensitive analog circuitry, provide the required bypass capacitance close to the supply pins, and consider adding connector-side protection where cables extend beyond the enclosure or into industrial environments. This page combines manufacturer specifications, package and ordering information, drop-in replacement guidance, comparison data, and practical interface-design notes. It is intended to help engineers confirm electrical compatibility, package fit, protection level, and application suitability before assigning the MAX3221EIDBRG4 to a PCB or updating an existing BOM.

Permintaan RFG Kontak
MAX3221EIPW - 250kbps Single RS-232 Transceiver | TI
MAX3221EIPW

MAX3221EIPW - 250kbps Single RS-232 Transceiver | TI

The Texas Instruments MAX3221EIPW is a single-channel RS-232 line driver and receiver rated for 250kbps operation, with a 3V to 5.5V supply range and ±15kV IEC ESD protection on the RS-232 pins. The device is packaged in a 16-pin TSSOP surface-mount package. An RS-232 transceiver is an interface IC that converts logic-level UART signals into differential, bipolar RS-232 levels and converts received RS-232 signals back into logic-compatible levels. The MAX3221E belongs to the RS-232 transceiver family within interface ICs and power-management-adjacent signal-conditioning devices. It provides the electrical interface between an asynchronous communication controller and a serial-port connector. The MAX3221E uses a single power supply and an on-chip charge pump with four small external capacitors. Its single driver and single receiver arrangement suits point-to-point serial links, while the enhanced ESD protection helps improve robustness at connector-facing pins. Operation across a 3V to 5.5V supply range supports both 3.3V and 5V system rails. The device meets TIA/EIA-232-F requirements and provides IEC 61000-4-2 ESD protection. These qualifications are important because RS-232 implementations frequently connect through external connectors where cables and ESD events can introduce transient voltage. The MAX3221EIPW is therefore suitable for industrial control links, service interfaces, and embedded equipment requiring a compact single-channel RS-232 solution. Typical uses include configuring a UART port on an embedded controller, upgrading an industrial peripheral that still uses an RS-232 connector, and creating a service or debug link between a host computer and field equipment. Because the interface is single-channel, applications needing multiple simultaneous RS-232 ports generally require additional transceiver channels or separate interface devices. Place the four charge-pump capacitors close to their assigned pins, and route the RS-232 driver and receiver traces as a protected cable-side interface. Keep logic-side UART traces away from connector and charge-pump nodes, provide a stable ground return, and verify the external protection network against the system’s ESD requirements. This page combines the manufacturer’s electrical specifications, package details, qualified substitute analysis, and practical PCB guidance. It also highlights where MAX3221E family alternatives share the same TSSOP-16 footprint and where their shutdown, enable, or ESD characteristics require verification before replacement.

Permintaan RFG Kontak
MAX3221EIPWG4 - 250kbps Single RS-232 Transceiver | TI
MAX3221EIPWG4

MAX3221EIPWG4 - 250kbps Single RS-232 Transceiver | TI

Texas Instruments MAX3221EIPWG4 is a single-channel RS-232 line transceiver with one driver and one receiver, a 250kbps maximum data rate, and ±15kV ESD protection. It operates from a single 3V to 5.5V supply and is packaged in a 16-pin TSSOP. The MAX3221E series provides the electrical interface between an asynchronous communications controller and an RS-232 connector. An RS-232 transceiver is an interface IC that converts logic-level signals between a host or controller and the voltage-domain signals used by RS-232 equipment. The MAX3221E belongs to the line-driver and receiver hierarchy, converts one transmit and one receive channel, and uses an on-chip charge pump with four external capacitors to generate the bipolar voltage required for RS-232 transmission. The device supports 3V to 5.5V operation and data rates up to 250kbps. Its ±15kV ESD protection applies to the RS-232 pins and helps protect the interface when cables are connected or disconnected. According to the manufacturer product page, the MAX3221 family meets TIA/EIA-232-F requirements, while the MAX3221E description identifies IEC 61000-4-2 ESD protection on the RS-232 pins. Typical uses include industrial serial-port equipment, data acquisition systems, embedded controllers, test and measurement instruments, and service interfaces that communicate through legacy RS-232 links. The single-channel architecture is appropriate when only one physical RS-232 channel is required and board area is more important than multi-channel integration. The 16-pin TSSOP supports compact surface-mount layouts, but its gull-wing leads require adequate spacing between the device and surrounding circuitry. The MAX3221EIPWG4 is marked obsolete and is no longer manufactured. New designs should confirm the lifecycle status of the selected replacement and compare its pinout, supply range, data rate, ESD rating, and charge-pump capacitor requirements before release. The obsolete status also makes obsolete-part sourcing, traceability, and long-term availability important procurement considerations. This page combines the manufacturer’s electrical specifications, lifecycle information, package details, application guidance, and a strict drop-in comparison framework. For a production redesign, verify the complete pin description and capacitor values in the manufacturer datasheet, then confirm supply-chain status using the Request a Quote form on this page before committing the component to a new PCB revision.

Permintaan RFG Kontak
MAX3221EIPWR - 250kbps Single RS-232 Transceiver | TI (Tape & Reel)
MAX3221EIPWR

MAX3221EIPWR - 250kbps Single RS-232 Transceiver | TI (Tape & Reel)

The Texas Instruments MAX3221EIPWR is a single-channel RS-232 line driver and receiver rated for 250kbps operation, with a 3V to 5.5V supply range and ±15kV IEC ESD protection on the RS-232 pins. The device is packaged in a 16-pin TSSOP surface-mount package. An RS-232 transceiver is an interface IC that converts logic-level UART signals into differential, bipolar RS-232 levels and converts received RS-232 signals back into logic-compatible levels. The MAX3221E belongs to the RS-232 transceiver family within interface ICs and power-management-adjacent signal-conditioning devices. It provides the electrical interface between an asynchronous communication controller and a serial-port connector. The MAX3221E uses a single power supply and an on-chip charge pump with four small external capacitors. Its single driver and single receiver arrangement suits point-to-point serial links, while the enhanced ESD protection helps improve robustness at connector-facing pins. Operation across a 3V to 5.5V supply range supports both 3.3V and 5V system rails. The device meets TIA/EIA-232-F requirements and provides IEC 61000-4-2 ESD protection. These qualifications are important because RS-232 implementations frequently connect through external connectors where cables and ESD events can introduce transient voltage. The MAX3221EIPWR is therefore suitable for industrial control links, service interfaces, and embedded equipment requiring a compact single-channel RS-232 solution. Typical uses include configuring a UART port on an embedded controller, upgrading an industrial peripheral that still uses an RS-232 connector, and creating a service or debug link between a host computer and field equipment. Because the interface is single-channel, applications needing multiple simultaneous RS-232 ports generally require additional transceiver channels or separate interface devices. Place the four charge-pump capacitors close to their assigned pins, and route the RS-232 driver and receiver traces as a protected cable-side interface. Keep logic-side UART traces away from connector and charge-pump nodes, provide a stable ground return, and verify the external protection network against the system’s ESD requirements. This page combines the manufacturer’s electrical specifications, package details, qualified substitute analysis, and practical PCB guidance. It also highlights where MAX3221E family alternatives share the same TSSOP-16 footprint and where their shutdown, enable, or ESD characteristics require verification before replacement.

Permintaan RFG Kontak
MAX3221EUE+T - 1/1 RS-232 Transceiver | Analog Devices
MAX3221EUE+T

MAX3221EUE+T - 1/1 RS-232 Transceiver | Analog Devices

The Analog Devices MAX3221EUE+T is a single-driver, single-receiver RS-232 transceiver rated for 120 Kbps operation, supplied from a 3.0 V to 5.5 V rail and housed in a 16-pin TSSOP package. It is designed for compact equipment that requires a bidirectional RS-232 connection without the larger channel count and footprint of a multi-driver interface IC. The device supports a 1 A supply current and belongs to the MAX3221 family with automatic shutdown and wake-up functionality. An RS-232 transceiver is an interface IC that translates between logic-level signals and the voltage levels used by RS-232 equipment. The transmitter converts a low-voltage digital signal into the bipolar voltage swing required by the RS-232 standard, while the receiver converts the incoming bipolar signal back into a logic-level output. Within the product hierarchy, the MAX3221EUE+T is an RS-232 transceiver, a serial-interface IC, and a member of the broader interface and semiconductor categories. The principal device characteristics are its 120 Kbps data rate, one transmit channel, one receive channel, 3.0 V to 5.5 V operating supply range, and 16-pin TSSOP package. Analog Devices describes the MAX3221 family as using AutoShutdown to reduce supply current to approximately 1 µA when no valid receiver signal is present. This low-power behavior is useful in battery-operated and intermittently connected systems where a permanently powered interface would otherwise waste energy. The MAX3221 family differs from the larger MAX3223 and MAX3243 devices in channel count and package size. The MAX3221 provides one driver and one receiver in a 16-pin package, making it appropriate for point-to-point links, while the MAX3223 and MAX3243 support multiple channels. AutoShutdown allows the interface to remain attached to a connector while reducing current consumption during inactivity, provided the system uses the shutdown and wake-up control functions as described by the manufacturer. Typical uses include industrial serial adapters, point-of-sale equipment, instrumentation, data acquisition systems, embedded control consoles, and maintenance interfaces. The single-channel arrangement is well suited to a local host port or service connector. For designs using a longer cable or a noisy industrial environment, the circuit should also consider connector grounding, cable length, signal polarity, and the ESD protection requirements of the complete system rather than relying on the transceiver alone. For layout, place the transceiver close to the RS-232 connector and keep the charge-pump, bypass-capacitor, driver, and receiver paths compact. Keep sensitive logic traces away from the switching node of the internal charge pump. Decouple the supply pins locally, use the package pin definitions in the manufacturer datasheet, and confirm external protection requirements for the connector and cable environment. This page consolidates the manufacturer family information, verified distributor listings, package details, compatible interface alternatives, and practical design guidance into one engineering reference. It also distinguishes documented performance from parameters that require confirmation in the complete datasheet before a new PCB is released for production.

Permintaan RFG Kontak
MAX3221EUE+TG1Z - 3V RS-232 Transceiver | Analog Devices
MAX3221EUE+TG1Z

MAX3221EUE+TG1Z - 3V RS-232 Transceiver | Analog Devices

The Analog Devices MAX3221EUE+TG1Z is a single-channel RS-232 transceiver with one transmitter and one receiver, operating from a 3 V to 5.5 V supply in a 16-pin TSSOP package. The device provides a 250 kbps data rate, automatic shutdown and wake-up behavior, and enhanced electrostatic-discharge protection rated at ±15 kV IEC-ESD. Its MAX3221E family architecture combines RS-232 line-driver and receiver functions in one package, making it suitable for compact serial-interface equipment. An RS-232 transceiver is an interface IC that converts logic-level digital signals to RS-232 voltage levels and converts incoming RS-232 signals back to logic levels. The MAX3221E belongs to the broader RS-232 transceiver, line-driver/receiver, communications-interface, and interface-IC hierarchy. Its single-channel arrangement is appropriate when a system needs one serial port rather than multiple RS-232 channels. The main advantages of the MAX3221E family are its low 3 V supply operation, 250 kbps maximum signaling rate, automatic power management, and enhanced ESD protection. AutoShutdown reduces supply consumption when the receiver does not detect a valid signal, while automatic wake-up restores operation when valid data returns. The manufacturer describes the MAX3221, MAX3223, and MAX3243 as achieving 1 uA supply current with this shutdown mechanism. The EUE+TG1Z ordering code identifies the MAX3221E device in a 16-pin TSSOP package, with the industrial temperature option and tape-and-reel production form indicated by the ordering suffix. The MAX3221E family supports 3 V-powered EIA/TIA-232 and V.28/V.24 communications interfaces. Its protected receiver and driver outputs are intended for equipment where the external serial port can be exposed to electrostatic discharge or cable transients. Typical applications include industrial serial consoles, programmable test equipment, point-of-sale terminals, instrument-control links, and embedded systems that retain an RS-232 port. In each case, the transceiver can operate from a 3 V system rail while providing the larger voltage swings required by RS-232. The 250 kbps capability also supports moderately high-speed legacy serial links, although the chosen protocol, cable length, and receiver thresholds remain important system-level constraints. Designers should follow the manufacturer’s recommended charge-pump capacitor and logic-side bypass-capacitor connections, keep the RS-232 trace route away from sensitive analog or high-speed digital nets, and provide the required protection and grounding strategy at an external connector. The device’s automatic shutdown behavior should also be checked against the system’s idle-state and remote-wakeup expectations. This page combines the exact orderable MPN, interface characteristics, package information, practical application guidance, and verified comparison context. It also identifies where detailed pin mapping, lifecycle status, and complete alternative-specific electrical limits must be confirmed in the manufacturer datasheet before design release.

Permintaan RFG Kontak