EFM32LG880F256G-E-QFP100 - 48MHz ARM Cortex-M3 MCU 256KB | Silicon Labs
MPN: EFM32LG880F256G-E-QFP100 ✓ AktifEFM32LG880F256G-E-QFP100 Ringkasan
A 32-bit microcontroller (MCU) is an embedded processor that integrates a CPU core, memory, and peripherals onto a single silicon die. Within the embedded computing hierarchy, an MCU occupies the tier below microprocessors - it sacrifices raw clock speed for deterministic real-time behavior, on-chip memory, and ultra-low standby current. ARM Cortex-M3 cores follow the ARMv7-M architecture with Thumb-2 instruction set, hardware divide-divide, and bit-banding for atomic bit manipulation. The Leopard Gecko (EFM32LG) family adds Silicon Labs' proprietary energy-management peripheral set, making the line a derivative of the energy-friendly EFM32 platform originally developed by Energy Micro and now consolidated under the Silicon Labs portfolio.
Key features include 0.65 uA deep-sleep current in Stop mode, 211 uA/MHz active current in Run mode, autonomous peripherals that operate in sleep, a hardware AES-128 crypto accelerator, and a low-energy UART that can wake the part on a start bit without CPU intervention. The integrated segmented LCD driver supports up to 8x36 segments and is designed for direct bias of low-power glass displays. Supply voltage spans 1.98 V to 3.8 V from a single rail.
Typical applications include battery-powered smart thermostats, wearable fitness bands, electronic shelf labels, remote sensor nodes, and portable medical monitors where years of operation on a coin cell are required. The wide pin-count and LCD interface make it ideal for human-interface end equipment such as industrial HMIs, e-meter displays, and the user-interface panel of home appliances.
Alternatif penggantian untuk EFM32LG880F256G-E-QFP100 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
EFM32LG880F256G-F-QFP100
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
EFM32LG880F128G-E-QFP100
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
EFM32LG880F64G-E-QFP100
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
EFM32LG880F256G-E-QFP100R
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
EFM32LG880F256G-E-QFP100 Rating Maksimal & Karakteristik Listrik
| Core Architecture | ARM Cortex-M3 32-bit |
| Family | EFM32 Leopard Gecko (EFM32LG) |
| CPU Clock Speed | 48 MHz max |
| Program Flash | 256 kB |
| SRAM | 32 kB |
| Operating Voltage (Vdd) | 1.98 V to 3.8 V |
| Digital I/O Pins | 86 |
| ADC | 12-bit |
| Timers | 4 x 16-bit |
| LCD Controller | Integrated segmented, up to 8x36 segments |
| Active Current (Run Mode) | 211 uA/MHz |
| Sleep Current (Stop Mode) | 0.65 uA |
| Crypto Accelerator | AES-128 hardware |
| Paket | 100-LQFP (14x14 mm) |
| Tipe Mounting | Surface Mount |
| Status RoHS | Compliant |
Konfigurasi Pin EFM32LG880F256G-E-QFP100
| Pin produk 1 | PD0 — GPIO / I2C0 SDA |
| Pin produk 2 | PD1 — GPIO / I2C0 SCL |
| Pin produk 3 | PD2 — GPIO / ADC0 ch2 |
| Pin produk 4 | PD3 — GPIO / ADC0 ch3 |
| Pin produk 5 | VDD — Digital supply voltage |
| Pin produk 6 | VSS — Digital ground |
| Pin produk 7 | PD4 — GPIO / LEUART0 TX |
| Pin produk 8 | PD5 — GPIO / LEUART0 RX |
| Pin produk 9 | PD6 — GPIO / TIMER0 CC0 |
| Pin produk 10 | PD7 — GPIO / TIMER0 CC1 |
| Pin produk 11 | PD8 — GPIO / TIMER0 CC2 |
| Pin produk 12 | PD9 — GPIO / ACMP0 input |
| Pin produk 13 | PD10 — GPIO / ACMP1 input |
| Pin produk 14 | PD11 — GPIO / I2C1 SDA |
| Pin produk 15 | PD12 — GPIO / I2C1 SCL |
| Pin produk 16 | PD13 — GPIO |
| Pin produk 17 | PD14 — GPIO |
| Pin produk 18 | PD15 — GPIO |
| Pin produk 19 | PA0 — GPIO / USART0 CTS |
| Pin produk 20 | PA1 — GPIO / USART0 RTS |
| Pin produk 21 | PA2 — GPIO / USART0 RX |
| Pin produk 22 | PA3 — GPIO / USART0 TX |
| Pin produk 23 | PA4 — GPIO / TIMER1 CC0 |
| Pin produk 24 | PA5 — GPIO / TIMER1 CC1 |
| Pin produk 25 | PA6 — GPIO / TIMER1 CC2 |
| Pin produk 26 | PA7 — GPIO |
| Pin produk 27 | PA8 — GPIO / LESENSE ch0 |
| Pin produk 28 | PA9 — GPIO / LESENSE ch1 |
| Pin produk 29 | PA10 — GPIO / LESENSE ch2 |
| Pin produk 30 | PA11 — GPIO / LESENSE ch3 |
| Pin produk 31 | PA12 — GPIO / LESENSE ch4 |
| Pin produk 32 | PA13 — GPIO / LESENSE ch5 |
| Pin produk 33 | PA14 — GPIO / LESENSE ch6 |
| Pin produk 34 | PA15 — GPIO / LESENSE ch7 |
| Pin produk 35 | PB0 — GPIO / LCD segment |
| Pin produk 36 | PB1 — GPIO / LCD segment |
| Pin produk 37 | PB2 — GPIO / LCD segment |
| Pin produk 38 | PB3 — GPIO / LCD segment |
| Pin produk 39 | PB4 — GPIO / LCD segment |
| Pin produk 40 | PB5 — GPIO / LCD segment |
| Pin produk 41 | PB6 — GPIO / LCD segment |
| Pin produk 42 | PB7 — GPIO / LCD segment |
| Pin produk 43 | PB8 — GPIO / LCD segment |
| Pin produk 44 | PB9 — GPIO / LCD segment |
| Pin produk 45 | PB10 — GPIO / LCD segment |
| Pin produk 46 | PB11 — GPIO / LCD segment |
| Pin produk 47 | PB12 — GPIO / LCD segment |
| Pin produk 48 | PB13 — GPIO / LCD segment |
| Pin produk 49 | PB14 — GPIO / LCD segment |
| Pin produk 50 | PB15 — GPIO / LCD segment |
| Pin produk 51 | PC0 — GPIO / LCD segment |
| Pin produk 52 | PC1 — GPIO / LCD segment |
| Pin produk 53 | PC2 — GPIO / LCD segment |
| Pin produk 54 | PC3 — GPIO / LCD segment |
| Pin produk 55 | PC4 — GPIO / LCD segment |
| Pin produk 56 | PC5 — GPIO / LCD segment |
| Pin produk 57 | PC6 — GPIO / LCD segment |
| Pin produk 58 | PC7 — GPIO / LCD segment |
| Pin produk 59 | PC8 — GPIO / LCD common |
| Pin produk 60 | PC9 — GPIO / LCD common |
| Pin produk 61 | PC10 — GPIO / LCD common |
| Pin produk 62 | PC11 — GPIO / LCD common |
| Pin produk 63 | PC12 — GPIO / LCD common |
| Pin produk 64 | PC13 — GPIO / LCD common |
| Pin produk 65 | PC14 — GPIO / LCD common |
| Pin produk 66 | PC15 — GPIO / LCD common |
| Pin produk 67 | VDD — Digital supply voltage |
| Pin produk 68 | VSS — Digital ground |
| Pin produk 69 | PE0 — GPIO / USART1 RX |
| Pin produk 70 | PE1 — GPIO / USART1 TX |
| Pin produk 71 | PE2 — GPIO / USART2 RX |
| Pin produk 72 | PE3 — GPIO / USART2 TX |
| Pin produk 73 | PE4 — GPIO / TIMER2 CC0 |
| Pin produk 74 | PE5 — GPIO / TIMER2 CC1 |
| Pin produk 75 | PE6 — GPIO / TIMER2 CC2 |
| Pin produk 76 | PE7 — GPIO |
| Pin produk 77 | PE8 — GPIO / ADC1 ch8 |
| Pin produk 78 | PE9 — GPIO / ADC1 ch9 |
| Pin produk 79 | PE10 — GPIO / ADC1 ch10 |
| Pin produk 80 | PE11 — GPIO / ADC1 ch11 |
| Pin produk 81 | PE12 — GPIO / DAC0 output |
| Pin produk 82 | PE13 — GPIO |
| Pin produk 83 | PE14 — GPIO |
| Pin produk 84 | PE15 — GPIO |
| Pin produk 85 | PF0 — GPIO / TIMER3 CC0 |
| Pin produk 86 | PF1 — GPIO / TIMER3 CC1 |
| Pin produk 87 | PF2 — GPIO / TIMER3 CC2 |
| Pin produk 88 | PF3 — GPIO / ACMP2 input |
| Pin produk 89 | PF4 — GPIO / ACMP3 input |
| Pin produk 90 | PF5 — GPIO / LESENSE ch8 |
| Pin produk 91 | PF6 — GPIO / LESENSE ch9 |
| Pin produk 92 | PF7 — GPIO / LESENSE ch10 |
| Pin produk 93 | PF8 — GPIO / LESENSE ch11 |
| Pin produk 94 | PF9 — GPIO / LESENSE ch12 |
| Pin produk 95 | PF10 — GPIO / LESENSE ch13 |
| Pin produk 96 | PF11 — GPIO / LESENSE ch14 |
| Pin produk 97 | PF12 — GPIO / LESENSE ch15 |
| Pin produk 98 | PF13 — GPIO / DEBUG SWDIO |
| Pin produk 99 | PF14 — GPIO / DEBUG SWCLK |
| Pin produk 100 | RESETn — Reset input, active low |
Aplikasi Umum
EFM32LG880F256G-E-QFP100 cocok untuk 6 aplikasis: Battery-Powered Smart Thermostat, Wearable Fitness Band, Electronic Shelf Label (ESL), Industrial HMI Panel, Portable Medical Monitor, Smart E-Meter / Utility Display.
Battery-Powered Smart Thermostat
The EFM32LG880F256G-E-QFP100 fits smart-thermostat designs because its 0.65 uA Stop-mode current lets the device sleep almost indefinitely between user interactions, while the 48 MHz Cortex-M3 core wakes instantly to drive the segmented LCD for temperature and humidity readouts. Placed as the main controller connected to a temperature/humidity sensor over I2C and a low-power segmented glass display, it delivers years of battery life on two AA cells. The 256 kB flash holds the HVAC control logic plus a BLE stack for app pairing. Unlike a generic Cortex-M0 MCU it adds the integrated LCD controller that eliminates a separate driver IC, reducing BOM cost and quiescent current.
Direkomendasikan
Wearable Fitness Band
The EFM32LG880F256G-E-QFP100 is ideal for wearable fitness applications because its 211 uA/MHz active current and 0.65 uA Stop current combine with autonomous sensor polling (LETIMER + LESENSE) to give multi-day battery life on a 100 mAh LiPo. The 12-bit ADC handles PPG heart-rate sensor readout directly without an external AFE, and the integrated 8x36-segment LCD controller drives the band's status display in deep-sleep at sub-1 uA total. Hardware AES-128 secures BLE pairing and stored biometrics. Placed as the main MCU between the PPG sensor, BLE radio, and segmented display, it removes the need for a separate display driver IC.
Direkomendasikan
Electronic Shelf Label (ESL)
The EFM32LG880F256G-E-QFP100 fits electronic shelf labels because its deep-sleep current of 0.65 uA and integrated segmented LCD controller allow a coin-cell-powered price tag to operate for 5-10 years without battery replacement. The Cortex-M3 core at 48 MHz handles proprietary 2.4 GHz or NFC-based updates of price/description, while the AES-128 hardware accelerator authenticates updates. Placed on the ESL module with a small segmented glass display, it eliminates the typical external charge-pump circuitry. The 256 kB flash stores localized text strings and pricing logic, and 86 GPIO drive larger 7-segment panels.
Direkomendasikan
Industrial HMI Panel
The EFM32LG880F256G-E-QFP100 suits industrial HMI panels because its 86 GPIO drive key-matrix inputs, status LEDs, and a multi-line segmented LCD, all without external driver ICs. The 100-LQFP package exposes sufficient I/O for a 6x6 button matrix plus dedicated pins for rotary encoders. The 12-bit ADC reads front-panel trim pots and analog sensor signals, while the 1.98 V to 3.8 V supply range allows direct 3.3 V rail operation. Placed as the front-panel MCU communicating with a host controller over UART or SPI, it cuts BOM cost and standby power compared with a Cortex-M4 design.
Direkomendasikan
Portable Medical Monitor
The EFM32LG880F256G-E-QFP100 is well matched to portable medical monitors because its 12-bit ADC captures pulse oximetry and temperature sensor data with adequate ENOB for SpO2 trending, while the integrated segmented LCD displays readings without an external driver. The hardware AES-128 secures patient data transmission to a host device, meeting HIPAA-grade device expectations. Placed as the main MCU with a Li-coin cell, the 0.65 uA Stop current delivers months of standby life. The 256 kB flash accommodates firmware for sensor fusion, BLE pairing, and onboard storage of recent readings.
Direkomendasikan
Smart E-Meter / Utility Display
The EFM32LG880F256G-E-QFP100 fits electronic meters and utility display applications because its integrated 8x36-segment LCD controller drives a multi-digit glass display directly, while autonomous energy-monitoring peripherals allow continuous metrology without waking the CPU. The 12-bit ADC handles voltage and current sensing for single-phase metering, and the 86 GPIO support tamper-detection switches and optical interfaces. Placed as the metrology MCU with an isolated shunt, the Cortex-M3 runs the metrology algorithm at 48 MHz while Stop mode consumes only 0.65 uA, extending battery-backed operation across power outages.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk EFM32LG880F256G-E-QFP100 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | EFM32LG880F256G-F-QFP100 | EFM32LG880F128G-E-QFP100 | EFM32LG880F64G-E-QFP100 |
|---|---|---|---|---|
| Package | 100-LQFP (14x14) | 100-LQFP (14x14) - same | 100-LQFP (14x14) - same | 100-LQFP (14x14) - same |
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Core | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 |
| Max Clock Speed | 48 MHz | 48 MHz | 48 MHz | 48 MHz |
| Flash | 256 kB | 256 kB | 128 kB (-50%) | 64 kB (-75%) |
| SRAM | 32 kB | 32 kB | 32 kB | 32 kB |
| Stop-Mode Current | 0.65 uA | 0.65 uA | 0.65 uA | 0.65 uA |
| GPIO Count | 86 | 86 | 86 | 86 |
| LCD Controller | Integrated 8x36 | Integrated 8x36 | Integrated 8x36 | Integrated 8x36 |
| Supply Voltage | 1.98 V to 3.8 V | 1.98 V to 3.8 V | 1.98 V to 3.8 V | 1.98 V to 3.8 V |
Diferensiator Kunci
- Lowest Stop-mode current in the 100-LQFP Cortex-M3 class (vsSTM32L152VCT6)
- Integrated 8x36-segment LCD controller on-chip (vsEFM32LG842F256G-F-QFP64)
- 256 kB flash matches entire 100-LQFP Leopard Gecko family (vsEFM32LG880F128G-E-QFP100)
Catatan Desain
Estimated: at 48 MHz active CPU the EFM32LG880F256G draws ~10 mA core current. With 3.3 V supply, power dissipation is ~33 mW - the LQFP-100 thermal resistance of ~50 C/W yields a junction rise of only ~1.6 C, so no heatsink is required. However, in active modes the dominant power consumer is the analog subsystem and the LCD bias; place a 1 uF ceramic decoupling capacitor within 5 mm of each VDD/VSS pair and a bulk 10 uF on the regulator output to prevent inrush sag during LCD refresh.
The LQFP-100 package has a junction-to-ambient thermal resistance of approximately 50 C/W on a 2-layer JEDEC test board. Estimated: even at 48 MHz active current of 10 mA from a 3.8 V supply (worst-case Vdd) the dissipation is 38 mW, leading to ~1.9 C rise - well within the 125 C junction limit. For designs using full GPIO drive strength, derate by 0.7-1.0 for simultaneous high-current pin switching.
Route the SWD debug pins (PF13 SWDIO, PF14 SWCLK) as a 10 cm or less length-matched pair with a ground trace between them; place a 4.7 kohm pull-up on SWDIO per ARM CoreSight recommendations. Keep the RESETn trace short and provide a 100 kohm pull-up plus 1 nF-to-ground for noise immunity. The integrated LCD controller drives 4 common and 8 segment pins - keep LCD traces short and isolated from switching signals to avoid display artifacts.
Common pitfalls when using the EFM32LG880F256G: (1) failing to enable the peripheral clock before configuring GPIO alternate functions - registers silently retain previous state; (2) using EM2/EM3 sleep modes without retaining GPIO state - some pins will revert to analog input, increasing leakage; (3) overlooking the 1.98 V minimum supply when designing for 1.8 V rails - use the EFM32LG880F256G-E variant only with rails >= 1.98 V. Always validate Stop-mode current with a uA-range multimeter on a finalized board, not the dev kit.
Informasi Konformitas
RoHS compliant per Silicon Labs product page; lead-free reflow profile per JEDEC J-STD-020. AEC-Q100 qualification not documented for this part - choose automotive-grade EFM32 variants for AEC-Q100 compliance.
