6EDL7141XUMA1 vs BTS70402EPGXUMA1 Perbandingan
Perbandingan bersamaan detil 6EDL7141XUMA1 dari Infineon dan BTS70402EPGXUMA1 dari Infineon. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | 6EDL7141XUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| Merek | Infineon | Infineon |
| Kategori | Motor Drivers | Power MOSFET Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | Three-phase gate driver IC (smart gate driver) | — |
| Topologi | Three half-bridge drivers (high-side + low-side) | — |
| Tegangan Pemuat Kerja | 5.5 V to 60 V (recommended) | — |
| Peak Gate Drive Current | 1.5 A source / 1.5 A sink | — |
| Number of Half-Bridges | 3 | — |
| Drive Type | Non-Inverting | — |
| Programmable Drive Voltage | Yes (configurable via SPI) | — |
| Integrated Current Sense Amplifiers | 3 (bi-directional low-side, programmable gain) | — |
| R_DSON Sensing | Supported via internal phase-node connections | — |
| Current Sense Output Compatibility | 3.3 V and 5 V logic | — |
| Communication Interface | SPI (digital configuration, >50 parameters) | — |
| Integrated Bootstrap Diodes | Yes | — |
| Integrated Charge Pump | Yes | — |
| Paket | PG-VQFN-48-78 (7x7 mm power QFN with exposed pad) | PG-TSDSO-14 (exposed thermal pad) |
| Tipe Mounting | Surface Mount | Surface Mount |
| Rentang Suhu Kerja | [DATA_NEEDED: operating temperature range] | -40 °C to +150 °C junction |
| Level MSL | [DATA_NEEDED: MSL rating] | — |
| Status RoHS | Compliant (per Infineon product page) | — |
| Manufacturer | — | Infineon Technologies |
| Part Family | — | PROFET+2 (BTS70xxx series) |
| Fungsi | — | Smart High-Side Power Switch |
| Number of Channels | — | 4 |
| Konfigurasi Output | — | High-side, N-channel MOSFET |
| Continuous Load Current per Channel | — | 3.5 A (typical) |
| On-State Resistance (Ron) per Channel | — | 65 mOhm typical |
| Operating Voltage Range | — | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Logic Supply Voltage | — | 3.3 V / 5 V compatible MCU I/O |
| Protection Features | — | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| Diagnostic Interface | — | SPI status register, current-sense feedback |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| RoHS Compliance | — | Compliant |