ADM485ARZ vs ADM485AQ Perbandingan
Perbandingan bersamaan detil ADM485ARZ dari Analog Devices dan ADM485AQ dari Analog Devices. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Analog Devices
ADM485ARZ - 5V 5Mbps Half-Duplex RS-485/RS-422 Transceiver | Analog Devices (Tape & Reel)
ADM485ARZ ✓ Aktif
Perbandingan Spesifikasi
| Parameter Umum | ADM485ARZ | ADM485AQ |
|---|---|---|
| Merek | Analog Devices | Analog Devices |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Type | Transceiver | — |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| Tegangan Pemuat | 5 V (single supply) | 5 V |
| Laju Data | 5 Mbps (max) | — |
| Receiver Hysteresis | [DATA_NEEDED: receiver hysteresis] | — |
| Common-Mode Range | -7 V to +12 V | — |
| Driver Differential Output | [DATA_NEEDED: VOD min/max] | — |
| Rentang Suhu Kerja | -40 C to +85 C | Commercial and industrial temperature range |
| Paket | SOIC-8 (SO-8) / SO-8 | 8-pin ceramic DIP |
| Tipe Mounting | Surface Mount | — |
| ESD Protection | [DATA_NEEDED: ESD HBM rating] | — |
| Status RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| REACH Status | Unaffected | [DATA_NEEDED: REACH status] |
| Level MSL | 1 (Unlimited) | — |
| Compliance | ROHS3 Compliant | — |
| Enable Pins | Yes (DE driver enable, RE receiver enable, active-low/GPIO logic) | — |
| Product Type | — | Differential RS-485/RS-422 line transceiver |
| Maximum Data Rate | — | 5 Mbit/s |
| Driver and Receiver Count | — | 1 differential driver and 1 differential receiver |
| Communication Standards | — | EIA RS-485 and RS-422 |
| Topologi | — | Bidirectional multipoint bus transmission lines |
| Package Designation | — | AQ |
| Switching Speed | — | Extremely fast switching speed |
| Driver Propagation Delay | — | Minimal |
| Differential Signaling | — | Balanced data transmission |
| EMI Behavior | — | Low skew is designed to minimize EMI interference |
| Gaya Mounting | — | Through-hole |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 status] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Absolute Maximum Ratings | — | [DATA_NEEDED: absolute maximum ratings] |
| Operating Voltage Range | — | [DATA_NEEDED: operating voltage range] |
| Arus Pemuat | — | [DATA_NEEDED: supply current] |
| Differential Output Voltage | — | [DATA_NEEDED: differential output voltage] |
| Receiver Input Sensitivity | — | [DATA_NEEDED: receiver input sensitivity] |
| Common-Mode Rejection | — | [DATA_NEEDED: common-mode rejection] |
| Power Dissipation | — | [DATA_NEEDED: power dissipation] |