ADM485ARZ vs ADM485AQ Karşılaştırma
Ayrıntılı yan yana karşılaştırma ADM485ARZ tarafından Analog Devices ve ADM485AQ tarafından Analog DevicesAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Analog Devices
ADM485ARZ - 5V 5Mbps Half-Duplex RS-485/RS-422 Transceiver | Analog Devices (Tape & Reel)
ADM485ARZ ✓ Aktif
Özellik Karşılaştırması
| Parametre | ADM485ARZ | ADM485AQ |
|---|---|---|
| Marka | Analog Devices | Analog Devices |
| Kategori | Interface ICs | Interface ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Type | Transceiver | — |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| Besleme Gerilimi | 5 V (single supply) | 5 V |
| Veri Hızı | 5 Mbps (max) | — |
| Receiver Hysteresis | [DATA_NEEDED: receiver hysteresis] | — |
| Common-Mode Range | -7 V to +12 V | — |
| Driver Differential Output | [DATA_NEEDED: VOD min/max] | — |
| İşletim Sıcaklığı Aralığı | -40 C to +85 C | Commercial and industrial temperature range |
| Paket | SOIC-8 (SO-8) / SO-8 | 8-pin ceramic DIP |
| Montaj Türü | Surface Mount | — |
| ESD Protection | [DATA_NEEDED: ESD HBM rating] | — |
| RoHS Durumu | Compliant | [DATA_NEEDED: RoHS status] |
| REACH Status | Unaffected | [DATA_NEEDED: REACH status] |
| MSL Seviyesi | 1 (Unlimited) | — |
| Compliance | ROHS3 Compliant | — |
| Enable Pins | Yes (DE driver enable, RE receiver enable, active-low/GPIO logic) | — |
| Product Type | — | Differential RS-485/RS-422 line transceiver |
| Maximum Data Rate | — | 5 Mbit/s |
| Driver and Receiver Count | — | 1 differential driver and 1 differential receiver |
| Communication Standards | — | EIA RS-485 and RS-422 |
| Ağ Yapısı | — | Bidirectional multipoint bus transmission lines |
| Package Designation | — | AQ |
| Switching Speed | — | Extremely fast switching speed |
| Driver Propagation Delay | — | Minimal |
| Differential Signaling | — | Balanced data transmission |
| EMI Behavior | — | Low skew is designed to minimize EMI interference |
| Montaj Stili | — | Through-hole |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 status] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Absolute Maximum Ratings | — | [DATA_NEEDED: absolute maximum ratings] |
| Operating Voltage Range | — | [DATA_NEEDED: operating voltage range] |
| Besleme Akımı | — | [DATA_NEEDED: supply current] |
| Differential Output Voltage | — | [DATA_NEEDED: differential output voltage] |
| Receiver Input Sensitivity | — | [DATA_NEEDED: receiver input sensitivity] |
| Common-Mode Rejection | — | [DATA_NEEDED: common-mode rejection] |
| Power Dissipation | — | [DATA_NEEDED: power dissipation] |