ADM485ARZ vs ADM485AQ Comparação
Comparação detalhada lado a lado de ADM485ARZ por Analog Devices e ADM485AQ por Analog Devices. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Analog Devices
ADM485ARZ - 5V 5Mbps Half-Duplex RS-485/RS-422 Transceiver | Analog Devices (Tape & Reel)
ADM485ARZ ✓ Ativo
Comparação de especificações
| Parâmetro | ADM485ARZ | ADM485AQ |
|---|---|---|
| Marca | Analog Devices | Analog Devices |
| Categoria | Interface ICs | Interface ICs |
| Status do ciclo de vida | Ativo | Ativo |
| Type | Transceiver | — |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| Tensão de alimentação | 5 V (single supply) | 5 V |
| Taxa de dados | 5 Mbps (max) | — |
| Receiver Hysteresis | [DATA_NEEDED: receiver hysteresis] | — |
| Common-Mode Range | -7 V to +12 V | — |
| Driver Differential Output | [DATA_NEEDED: VOD min/max] | — |
| Faixa de temperatura de operação | -40 C to +85 C | Commercial and industrial temperature range |
| Encapsulamento | SOIC-8 (SO-8) / SO-8 | 8-pin ceramic DIP |
| Tipo de montagem | Surface Mount | — |
| ESD Protection | [DATA_NEEDED: ESD HBM rating] | — |
| Status RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| REACH Status | Unaffected | [DATA_NEEDED: REACH status] |
| Nível MSL | 1 (Unlimited) | — |
| Compliance | ROHS3 Compliant | — |
| Enable Pins | Yes (DE driver enable, RE receiver enable, active-low/GPIO logic) | — |
| Product Type | — | Differential RS-485/RS-422 line transceiver |
| Maximum Data Rate | — | 5 Mbit/s |
| Driver and Receiver Count | — | 1 differential driver and 1 differential receiver |
| Communication Standards | — | EIA RS-485 and RS-422 |
| Topologia | — | Bidirectional multipoint bus transmission lines |
| Package Designation | — | AQ |
| Switching Speed | — | Extremely fast switching speed |
| Driver Propagation Delay | — | Minimal |
| Differential Signaling | — | Balanced data transmission |
| EMI Behavior | — | Low skew is designed to minimize EMI interference |
| Estilo de montagem | — | Through-hole |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 status] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Absolute Maximum Ratings | — | [DATA_NEEDED: absolute maximum ratings] |
| Operating Voltage Range | — | [DATA_NEEDED: operating voltage range] |
| Corrente de alimentação | — | [DATA_NEEDED: supply current] |
| Differential Output Voltage | — | [DATA_NEEDED: differential output voltage] |
| Receiver Input Sensitivity | — | [DATA_NEEDED: receiver input sensitivity] |
| Common-Mode Rejection | — | [DATA_NEEDED: common-mode rejection] |
| Power Dissipation | — | [DATA_NEEDED: power dissipation] |