ADM485ARZ vs DS90C402M Perbandingan
Perbandingan bersamaan detil ADM485ARZ dari Analog Devices dan DS90C402M dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Analog Devices
ADM485ARZ - 5V 5Mbps Half-Duplex RS-485/RS-422 Transceiver | Analog Devices (Tape & Reel)
ADM485ARZ ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | ADM485ARZ | DS90C402M |
|---|---|---|
| Merek | Analog Devices | Texas Instruments |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Type | Transceiver | — |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| Tegangan Pemuat | 5 V (single supply) | — |
| Laju Data | 5 Mbps (max) | — |
| Receiver Hysteresis | [DATA_NEEDED: receiver hysteresis] | — |
| Common-Mode Range | -7 V to +12 V | — |
| Driver Differential Output | [DATA_NEEDED: VOD min/max] | — |
| Rentang Suhu Kerja | -40 C to +85 C | [DATA_NEEDED: operating temperature range] |
| Paket | SOIC-8 (SO-8) / SO-8 | 8-lead SOIC |
| Tipe Mounting | Surface Mount | Surface mount |
| ESD Protection | [DATA_NEEDED: ESD HBM rating] | — |
| Status RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| REACH Status | Unaffected | [DATA_NEEDED: REACH status] |
| Level MSL | 1 (Unlimited) | — |
| Compliance | ROHS3 Compliant | — |
| Enable Pins | Yes (DE driver enable, RE receiver enable, active-low/GPIO logic) | — |
| Device Type | — | Dual LVDS receiver |
| Receiver Configuration | — | 2 receivers |
| Input Threshold Sensitivity | — | ±100 mV |
| Common-Mode Noise Protection | — | Supported |
| Data-Rate Optimization | — | High data rate |
| Power Optimization | — | Low power |
| Interface Pairing | — | DS90C401 companion device |
| Topologi | — | Dual high-speed point-to-point interface |
| Package Family | — | SOIC surface-mount package family |
| Jumlah Pin | — | 8 |
| Tegangan Pemuat Kerja | — | [DATA_NEEDED: operating supply voltage] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Maximum Data Rate | — | [DATA_NEEDED: maximum data rate] |
| Arus Pemuat | — | [DATA_NEEDED: supply current] |
| Differential Input Termination | — | [DATA_NEEDED: input termination requirement] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| MSL | — | [DATA_NEEDED: moisture sensitivity level] |