ADM485ARZ vs DS90C402M Comparação
Comparação detalhada lado a lado de ADM485ARZ por Analog Devices e DS90C402M por Texas Instruments. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Analog Devices
ADM485ARZ - 5V 5Mbps Half-Duplex RS-485/RS-422 Transceiver | Analog Devices (Tape & Reel)
ADM485ARZ ✓ AtivoComparação de especificações
| Parâmetro | ADM485ARZ | DS90C402M |
|---|---|---|
| Marca | Analog Devices | Texas Instruments |
| Categoria | Interface ICs | Interface ICs |
| Status do ciclo de vida | Ativo | Ativo |
| Type | Transceiver | — |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| Tensão de alimentação | 5 V (single supply) | — |
| Taxa de dados | 5 Mbps (max) | — |
| Receiver Hysteresis | [DATA_NEEDED: receiver hysteresis] | — |
| Common-Mode Range | -7 V to +12 V | — |
| Driver Differential Output | [DATA_NEEDED: VOD min/max] | — |
| Faixa de temperatura de operação | -40 C to +85 C | [DATA_NEEDED: operating temperature range] |
| Encapsulamento | SOIC-8 (SO-8) / SO-8 | 8-lead SOIC |
| Tipo de montagem | Surface Mount | Surface mount |
| ESD Protection | [DATA_NEEDED: ESD HBM rating] | — |
| Status RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| REACH Status | Unaffected | [DATA_NEEDED: REACH status] |
| Nível MSL | 1 (Unlimited) | — |
| Compliance | ROHS3 Compliant | — |
| Enable Pins | Yes (DE driver enable, RE receiver enable, active-low/GPIO logic) | — |
| Device Type | — | Dual LVDS receiver |
| Receiver Configuration | — | 2 receivers |
| Input Threshold Sensitivity | — | ±100 mV |
| Common-Mode Noise Protection | — | Supported |
| Data-Rate Optimization | — | High data rate |
| Power Optimization | — | Low power |
| Interface Pairing | — | DS90C401 companion device |
| Topologia | — | Dual high-speed point-to-point interface |
| Package Family | — | SOIC surface-mount package family |
| Número de pinos | — | 8 |
| Tensão de alimentação de operação | — | [DATA_NEEDED: operating supply voltage] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Maximum Data Rate | — | [DATA_NEEDED: maximum data rate] |
| Corrente de alimentação | — | [DATA_NEEDED: supply current] |
| Differential Input Termination | — | [DATA_NEEDED: input termination requirement] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| MSL | — | [DATA_NEEDED: moisture sensitivity level] |