ADM485ARZ vs DS90C402M Karşılaştırma
Ayrıntılı yan yana karşılaştırma ADM485ARZ tarafından Analog Devices ve DS90C402M tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Analog Devices
ADM485ARZ - 5V 5Mbps Half-Duplex RS-485/RS-422 Transceiver | Analog Devices (Tape & Reel)
ADM485ARZ ✓ AktifÖzellik Karşılaştırması
| Parametre | ADM485ARZ | DS90C402M |
|---|---|---|
| Marka | Analog Devices | Texas Instruments |
| Kategori | Interface ICs | Interface ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Type | Transceiver | — |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| Besleme Gerilimi | 5 V (single supply) | — |
| Veri Hızı | 5 Mbps (max) | — |
| Receiver Hysteresis | [DATA_NEEDED: receiver hysteresis] | — |
| Common-Mode Range | -7 V to +12 V | — |
| Driver Differential Output | [DATA_NEEDED: VOD min/max] | — |
| İşletim Sıcaklığı Aralığı | -40 C to +85 C | [DATA_NEEDED: operating temperature range] |
| Paket | SOIC-8 (SO-8) / SO-8 | 8-lead SOIC |
| Montaj Türü | Surface Mount | Surface mount |
| ESD Protection | [DATA_NEEDED: ESD HBM rating] | — |
| RoHS Durumu | Compliant | [DATA_NEEDED: RoHS status] |
| REACH Status | Unaffected | [DATA_NEEDED: REACH status] |
| MSL Seviyesi | 1 (Unlimited) | — |
| Compliance | ROHS3 Compliant | — |
| Enable Pins | Yes (DE driver enable, RE receiver enable, active-low/GPIO logic) | — |
| Device Type | — | Dual LVDS receiver |
| Receiver Configuration | — | 2 receivers |
| Input Threshold Sensitivity | — | ±100 mV |
| Common-Mode Noise Protection | — | Supported |
| Data-Rate Optimization | — | High data rate |
| Power Optimization | — | Low power |
| Interface Pairing | — | DS90C401 companion device |
| Ağ Yapısı | — | Dual high-speed point-to-point interface |
| Package Family | — | SOIC surface-mount package family |
| Pin Sayısı | — | 8 |
| İşletim Besleme Gerilimi | — | [DATA_NEEDED: operating supply voltage] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Maximum Data Rate | — | [DATA_NEEDED: maximum data rate] |
| Besleme Akımı | — | [DATA_NEEDED: supply current] |
| Differential Input Termination | — | [DATA_NEEDED: input termination requirement] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| MSL | — | [DATA_NEEDED: moisture sensitivity level] |