BSP452HUMA1 vs BSP452 Perbandingan
Perbandingan bersamaan detil BSP452HUMA1 dari Infineon dan BSP452 dari Infineon. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | BSP452HUMA1 | BSP452 |
|---|---|---|
| Merek | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | Smart High-Side Power Switch | Smart High-Side Power Switch (Classic PROFET 12V) |
| Family | Classic PROFET 12V | — |
| Number of Channels | 1 | 1 |
| Switch Type | N-Channel (integrated vertical power FET) | — |
| Tegangan Pemuat Kerja | 5 V to 34 V | — |
| Continuous Load Current | 700 mA | — |
| On-State Resistance (RDS(on)) | 0.16 ohm (typical) | — |
| Paket | PG-SOT223-4 (3+Tab) | PG-SOT223-4 (4-pin SOT-223 with tab) |
| Tipe Mounting | Surface Mount | Surface Mount |
| Automotive Qualification | AEC-Q100 qualified | — |
| Short-Circuit Protection | Yes (integrated) | — |
| Overvoltage Protection | Yes (clamp) | — |
| Overtemperature Protection | Yes (shutdown with hysteresis) | — |
| Overload Protection | Yes | — |
| ESD Protection | Yes (input pin) | — |
| Inductive Load Switching | Yes (with negative output clamp) | — |
| Suhu Kerja | -40 C to +150 C (junction) | — |
| Level MSL | 1 (per JEDEC J-STD-020) | — |
| Status RoHS | Compliant | — |
| Technology | — | N-channel vertical power FET with charge pump (Smart SIPMOS) |
| Input Compatibility | — | CMOS compatible logic-level input, ground referenced |
| Nominal Load Current | — | 1.1 A |
| DC Continuous Load Current (DigiKey listing) | — | 700 mA |
| Supply Voltage (Vbb) | — | 60 V max (avalanche rated) |
| On-Resistance (Rds(on)) | — | [DATA_NEEDED: typical Rds(on) in mOhm] |
| Rentang Suhu Kerja | — | [DATA_NEEDED: Tj range, likely -40C to +150C for automotive] |
| Diagnostic Feedback | — | Yes (status output) |
| Protection Features | — | Over-temperature, over-voltage (clamping), ESD, current limit, reverse battery |
| ESD Rating (HBM, per datasheet) | — | Tested per MIL-STD-883D Method 3015.7 |
| Load Dump Protection | — | Per ISO 7637-1 and DIN 40839 |
| Lead-Free / RoHS | — | Yes (Infineon standard) |