BSP742RIXUMA1 vs BSP742RXUMA1 Perbandingan
Perbandingan bersamaan detil BSP742RIXUMA1 dari Infineon dan BSP742RXUMA1 dari Infineon. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | BSP742RIXUMA1 | BSP742RXUMA1 |
|---|---|---|
| Merek | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | Smart High-Side Power Switch | Smart High-Side Power Switch |
| Topologi | 1:1 N-Channel High-Side | 1:1 N-Channel High-Side Switch |
| Family | miniPROFET | — |
| Output Current (Nominal) | 400 mA | — |
| RDS(on) Typical at 25°C | 250 mΩ | — |
| Tegangan Pemuat Kerja | 5 V to 34 V | — |
| Load Dump Tolerance | 41 V | — |
| Reverse Battery Protection | -16 V | — |
| On-State Resistance (max) | [DATA_NEEDED: RDS(on) maximum at 25°C] | — |
| Batas Arus | [DATA_NEEDED: current limit typical value] | — |
| Penutupan Panas | Yes with auto restart | — |
| Overvoltage Protection | Yes (including load dump) | — |
| Short Circuit Protection | Yes | — |
| Open Load Detection | Yes (diagnostic pin) | — |
| Demagnetization of Inductive Loads | Yes (internal) | — |
| Paket | PG-DSO-8-6 (SOIC-8, 3.90 mm body) | PG-DSO-8-6 (8-pin SOIC, exposed pad variant) |
| Tipe Mounting | Surface Mount | Surface Mount |
| Rentang Suhu Kerja | -40 °C to +150 °C | -40°C to +150°C (TJ) |
| Level MSL | [DATA_NEEDED: MSL rating] | — |
| Status RoHS | Compliant | — |
| Operating Voltage Range (Vbb) | — | 5 V to 34 V |
| Continuous Load Current | — | 400 mA |
| On-Resistance R_DS(on) (typ) | — | 70 mΩ |
| On-Resistance R_DS(on) (max) | — | [DATA_NEEDED: R_DS(on) max value at 25C] |
| Quiescent Current (Iq typ) | — | 5 µA |
| Input Type | — | CMOS-compatible logic, active-high |
| AEC-Q100 Qualification | — | Qualified (Automotive Grade) |
| Protection Features | — | Overload, Short-Circuit, Thermal Shutdown with Restart, Overvoltage (Load Dump), Reverse Battery |
| Diagnostic Output | — | Yes (Status / Fault feedback) |
| Inductive Load Switching | — | Fast demagnetization integrated |
| RoHS Compliance | — | Compliant |
| MSL Moisture Sensitivity Level | — | MSL 2 (per JEDEC J-STD-020) |