BSP742RIXUMA1 vs BSP742RXUMA1 مقایسه
مقایسه دقیق کنار به کنار BSP742RIXUMA1 توسط Infineon و BSP742RXUMA1 توسط Infineon. مشخصات کلیدی، پارامترهای الکتریکی، بسته‌بندی، وضعیت چرخه عمر، قیمت‌گذاری و موجودی را مقایسه کنید تا بهترین قطعه را برای نیازهای طراحی خود تعیین کنید.
مقایسه مشخصات
| پارامتر | BSP742RIXUMA1 | BSP742RXUMA1 |
|---|---|---|
| برند | Infineon | Infineon |
| دسته‌بندی | Power MOSFET Drivers | Power MOSFET Drivers |
| وضعیت چرخه عمر | فعال | فعال |
| Product Type | Smart High-Side Power Switch | Smart High-Side Power Switch |
| توپولوژی | 1:1 N-Channel High-Side | 1:1 N-Channel High-Side Switch |
| Family | miniPROFET | — |
| Output Current (Nominal) | 400 mA | — |
| RDS(on) Typical at 25°C | 250 mΩ | — |
| ولتاژ تغذیه کاری | 5 V to 34 V | — |
| Load Dump Tolerance | 41 V | — |
| Reverse Battery Protection | -16 V | — |
| On-State Resistance (max) | [DATA_NEEDED: RDS(on) maximum at 25°C] | — |
| محدودیت جریان | [DATA_NEEDED: current limit typical value] | — |
| خاموشی حرارتی | Yes with auto restart | — |
| Overvoltage Protection | Yes (including load dump) | — |
| Short Circuit Protection | Yes | — |
| Open Load Detection | Yes (diagnostic pin) | — |
| Demagnetization of Inductive Loads | Yes (internal) | — |
| بسته‌بندی | PG-DSO-8-6 (SOIC-8, 3.90 mm body) | PG-DSO-8-6 (8-pin SOIC, exposed pad variant) |
| نوع نصب | Surface Mount | Surface Mount |
| محدوده دمای کاری | -40 °C to +150 °C | -40°C to +150°C (TJ) |
| سطح MSL | [DATA_NEEDED: MSL rating] | — |
| وضعیت RoHS | Compliant | — |
| Operating Voltage Range (Vbb) | — | 5 V to 34 V |
| Continuous Load Current | — | 400 mA |
| On-Resistance R_DS(on) (typ) | — | 70 mΩ |
| On-Resistance R_DS(on) (max) | — | [DATA_NEEDED: R_DS(on) max value at 25C] |
| Quiescent Current (Iq typ) | — | 5 µA |
| Input Type | — | CMOS-compatible logic, active-high |
| AEC-Q100 Qualification | — | Qualified (Automotive Grade) |
| Protection Features | — | Overload, Short-Circuit, Thermal Shutdown with Restart, Overvoltage (Load Dump), Reverse Battery |
| Diagnostic Output | — | Yes (Status / Fault feedback) |
| Inductive Load Switching | — | Fast demagnetization integrated |
| RoHS Compliance | — | Compliant |
| MSL Moisture Sensitivity Level | — | MSL 2 (per JEDEC J-STD-020) |