BTS441RGATMA1 vs BTS70082EPAXUMA1 Perbandingan
Perbandingan bersamaan detil BTS441RGATMA1 dari Infineon dan BTS70082EPAXUMA1 dari Infineon. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Infineon
BTS70082EPAXUMA1 - 2x 8mΩ 7.5A Smart High-Side Switch | Infineon PROFET
BTS70082EPAXUMA1 ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | BTS441RGATMA1 | BTS70082EPAXUMA1 |
|---|---|---|
| Merek | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Manufacturer | Infineon Technologies AG | — |
| Part Number | BTS441RGATMA1 | — |
| Switch Type | 1:1 N-Channel High-Side | High-side N-channel MOSFET switch |
| Jumlah Output | 1 | — |
| Continuous Load Current | 17 A | — |
| Topologi | Smart High-Side Switch | — |
| Input Type | CMOS-compatible, ground referenced | — |
| Diagnostics | Yes (fault feedback) | — |
| Technology | Smart SIPMOS (N-channel vertical FET + charge pump) | — |
| Paket | PG-TO263-5-2 (TO-263-5) | PG-TSDSO-14-22 (TSSOP-14 EP, 14-pin thermal-pad SMD) |
| Tipe Mounting | Surface Mount | Surface Mount |
| Jumlah Pin | 5 | — |
| Operating Voltage Range | [DATA_NEEDED: Vbb range, e.g. 6V-42V] | — |
| On-State Resistance (Rds(on)) | [DATA_NEEDED: Rds(on) at 25 C] | — |
| Over-Current Protection | Yes (integrated) | — |
| Thermal Protection | Yes (overtemperature shutdown) | — |
| Over-Voltage Protection | Yes (inductive load clamping) | — |
| Automotive Qualified | Yes (AEC-Q100 automotive grade) | — |
| Status RoHS | Compliant | Compliant |
| Tape and Reel Quantity | 1000 (per reel) | — |
| Product Family | — | PROFET+2 (12 V, dual channel) |
| Number of Channels | — | 2 |
| On-Resistance (RDS(on)) per channel | — | 16 mΩ typical (8 mΩ channel-on resistance per channel pair) |
| Continuous Load Current per channel | — | 7.5 A |
| Nominal Supply Voltage | — | 12 V |
| Operating Supply Voltage Range | — | 3.1 V to 28 V |
| Load Dump / Transient Tolerance | — | 42 V per ISO 7637-2 |
| Reverse Battery Protection | — | -16 V |
| Standby Current | — | [DATA_NEEDED: standby current uA] |
| Current Sense (IS) Ratio kILIS | — | 5000 (typical) |
| Protection Features | — | Overtemperature shutdown, overcurrent, short to ground, short to VS, open load, ground loss |
| Diagnostic Output | — | Current-sense (IS) pin, analog/digital |
| Suhu Hubung Kerja | — | -40 °C to +150 °C |
| AEC-Q100 Qualification | — | Yes (Automotive Grade) |
| Level MSL | — | MSL3 (per JEDEC J-STD-020) |