BTS6133DAUMA1 vs BTS5014SDAAUMA1 Perbandingan
Perbandingan bersamaan detil BTS6133DAUMA1 dari Infineon dan BTS5014SDAAUMA1 dari Infineon. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | BTS6133DAUMA1 | BTS5014SDAAUMA1 |
|---|---|---|
| Merek | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Manufacturer | Infineon Technologies | — |
| Part Number | BTS6133DAUMA1 | — |
| Product Type | Smart High-Side Power Switch | Smart High-Side Power Switch |
| Technology | SIPMOS (N-channel MOSFET with control IC) | — |
| Switch Configuration | 1:1 (single high-side) | — |
| Jumlah Output | 1 | — |
| Peak Drain Current | 41 A | — |
| Continuous Load Current | 8 A | — |
| Operating Voltage Range | [DATA_NEEDED: VBB operating range] | — |
| On-State Resistance (RDS(on)) | [DATA_NEEDED: RDS(on) at 25C] | [DATA_NEEDED: RDS(on) at 25C] |
| Paket | PG-TO252-5-11 (DPAK-5) | PG-TO252-5-11 (DPAK-5, 4 leads + tab) |
| Jumlah Pin | 5 | — |
| Tipe Mounting | Surface Mount | Surface Mount |
| Rentang Suhu Kerja | -40C to +150C | -40 C to +150 C (junction) |
| Protection Features | Over-temperature, short-circuit, overload, under-voltage, over-voltage, current limitation | — |
| Diagnostic Feedback | Yes (status / fault pin) | — |
| Level MSL | 3 (per JEDEC J-STD-020, typical for DPAK) | — |
| Status RoHS | Compliant | Compliant |
| AEC-Q100 Qualified | AEC-Q100 qualified (automotive grade) | — |
| Datasheet Document Size | 257 Kbytes (15 pages) | — |
| Number of Channels | — | 1 |
| Topologi | — | N-Channel vertical power MOSFET with charge pump |
| Nominal Load Current | — | 6 A |
| Tegangan Pemuat Kerja | — | 5 V to 28 V (load-dump tolerant to 41 V) |
| Standby Current | — | [DATA_NEEDED: standby current uA] |
| Batas Arus | — | [DATA_NEEDED: ICL typical] |
| Load Type | — | Resistive, inductive, capacitive |
| Diagnostic Features | — | Current sense (IS), fault status (ST), open-drain |
| Protection Functions | — | Over-current, over-temperature, over-voltage, ESD |
| ESD Protection | — | [DATA_NEEDED: HBM/CDM rating] |
| Process Technology | — | Infineon SMART7 |