BTS6133DAUMA1 vs BTS5014SDAAUMA1 Karşılaştırma
Ayrıntılı yan yana karşılaştırma BTS6133DAUMA1 tarafından Infineon ve BTS5014SDAAUMA1 tarafından InfineonAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | BTS6133DAUMA1 | BTS5014SDAAUMA1 |
|---|---|---|
| Marka | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Manufacturer | Infineon Technologies | — |
| Part Number | BTS6133DAUMA1 | — |
| Product Type | Smart High-Side Power Switch | Smart High-Side Power Switch |
| Technology | SIPMOS (N-channel MOSFET with control IC) | — |
| Switch Configuration | 1:1 (single high-side) | — |
| Çıkış Sayısı | 1 | — |
| Peak Drain Current | 41 A | — |
| Continuous Load Current | 8 A | — |
| Operating Voltage Range | [DATA_NEEDED: VBB operating range] | — |
| On-State Resistance (RDS(on)) | [DATA_NEEDED: RDS(on) at 25C] | [DATA_NEEDED: RDS(on) at 25C] |
| Paket | PG-TO252-5-11 (DPAK-5) | PG-TO252-5-11 (DPAK-5, 4 leads + tab) |
| Pin Sayısı | 5 | — |
| Montaj Türü | Surface Mount | Surface Mount |
| İşletim Sıcaklığı Aralığı | -40C to +150C | -40 C to +150 C (junction) |
| Protection Features | Over-temperature, short-circuit, overload, under-voltage, over-voltage, current limitation | — |
| Diagnostic Feedback | Yes (status / fault pin) | — |
| MSL Seviyesi | 3 (per JEDEC J-STD-020, typical for DPAK) | — |
| RoHS Durumu | Compliant | Compliant |
| AEC-Q100 Qualified | AEC-Q100 qualified (automotive grade) | — |
| Datasheet Document Size | 257 Kbytes (15 pages) | — |
| Number of Channels | — | 1 |
| Ağ Yapısı | — | N-Channel vertical power MOSFET with charge pump |
| Nominal Load Current | — | 6 A |
| İşletim Besleme Gerilimi | — | 5 V to 28 V (load-dump tolerant to 41 V) |
| Standby Current | — | [DATA_NEEDED: standby current uA] |
| Akım Sınırı | — | [DATA_NEEDED: ICL typical] |
| Load Type | — | Resistive, inductive, capacitive |
| Diagnostic Features | — | Current sense (IS), fault status (ST), open-drain |
| Protection Functions | — | Over-current, over-temperature, over-voltage, ESD |
| ESD Protection | — | [DATA_NEEDED: HBM/CDM rating] |
| Process Technology | — | Infineon SMART7 |