BTS6133DAUMA1 vs BTS5014SDAAUMA1 Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci BTS6133DAUMA1 disebabkan oleh Infineon dan BTS5014SDAAUMA1 disebabkan oleh Infineon. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Pengandingan Spesifikasi
| Parametr | BTS6133DAUMA1 | BTS5014SDAAUMA1 |
|---|---|---|
| Merek | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Manufacturer | Infineon Technologies | — |
| Part Number | BTS6133DAUMA1 | — |
| Product Type | Smart High-Side Power Switch | Smart High-Side Power Switch |
| Technology | SIPMOS (N-channel MOSFET with control IC) | — |
| Switch Configuration | 1:1 (single high-side) | — |
| Bilangan Output | 1 | — |
| Peak Drain Current | 41 A | — |
| Continuous Load Current | 8 A | — |
| Operating Voltage Range | [DATA_NEEDED: VBB operating range] | — |
| On-State Resistance (RDS(on)) | [DATA_NEEDED: RDS(on) at 25C] | [DATA_NEEDED: RDS(on) at 25C] |
| Kemasan | PG-TO252-5-11 (DPAK-5) | PG-TO252-5-11 (DPAK-5, 4 leads + tab) |
| Kiraan Pin | 5 | — |
| Jenis Pemasangan | Surface Mount | Surface Mount |
| Gambaran Suhu Operasi | -40C to +150C | -40 C to +150 C (junction) |
| Protection Features | Over-temperature, short-circuit, overload, under-voltage, over-voltage, current limitation | — |
| Diagnostic Feedback | Yes (status / fault pin) | — |
| Aras MSL | 3 (per JEDEC J-STD-020, typical for DPAK) | — |
| Status RoHS | Compliant | Compliant |
| AEC-Q100 Qualified | AEC-Q100 qualified (automotive grade) | — |
| Datasheet Document Size | 257 Kbytes (15 pages) | — |
| Number of Channels | — | 1 |
| Tetstruktur | — | N-Channel vertical power MOSFET with charge pump |
| Nominal Load Current | — | 6 A |
| Tegangan Pemberi Arus Operasi | — | 5 V to 28 V (load-dump tolerant to 41 V) |
| Standby Current | — | [DATA_NEEDED: standby current uA] |
| Had Arus | — | [DATA_NEEDED: ICL typical] |
| Load Type | — | Resistive, inductive, capacitive |
| Diagnostic Features | — | Current sense (IS), fault status (ST), open-drain |
| Protection Functions | — | Over-current, over-temperature, over-voltage, ESD |
| ESD Protection | — | [DATA_NEEDED: HBM/CDM rating] |
| Process Technology | — | Infineon SMART7 |