DRV8886ATPWP vs DRV8886ATPWPR Perbandingan
Perbandingan bersamaan detil DRV8886ATPWP dari Texas Instruments dan DRV8886ATPWPR dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Texas Instruments
DRV8886ATPWP - 37V 2A Bipolar Stepper Driver | Texas Instruments
DRV8886ATPWP ✓ AktifTexas Instruments
DRV8886ATPWPR - 37V 2A Stepper Driver w/ AutoTune | Texas Instruments
DRV8886ATPWPR ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | DRV8886ATPWP | DRV8886ATPWPR |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Motor Drivers | Motor Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Motor Type | Bipolar Stepper | Bipolar stepper (2-phase) |
| Number of Full H-Bridges | 2 | — |
| Load Voltage Rating (VM max) | 37 V | — |
| Minimum Operating VM | 8 V | — |
| Logic Supply Voltage (VCC) | 3 V to 5.5 V | 3 V to 5.5 V |
| Full-Scale Output Current | 2 A (per H-bridge, 25°C PCB-dependent) | — |
| RMS Output Current | 1.4 A (24 V, TA=25°C, PCB design-dependent) | — |
| Peak Output Current | 3 A | — |
| HS + LS On-Resistance (RDSon) | 550 mΩ | — |
| Control Interface | STEP / DIR (Hardware GPIO) | STEP / DIR (indexer built-in) |
| Microstepping Levels | Full to 1/16 step | 1, 2, 4, 8, 16, 32 (up to 1/16 native) |
| Integrated Current Sense | Yes (internal sense, no external resistors) | — |
| AutoTune / Smart Tune Decay | Yes | — |
| Decay Modes | Smart tune, mixed, slow, fast (programmable) | — |
| Sleep Current | 20 µA | [DATA_NEEDED: nSLEEP quiescent current] |
| PWM Chopping Frequency | Up to 100 kHz | — |
| Rentang Suhu Kerja | -40°C to +125°C | — |
| Temperature Grade | Automotive | — |
| Paket | HTSSOP-24 (PWP) PowerPAD | HTSSOP-24 (PWP) with PowerPAD, 7.8 mm x 4.4 mm |
| Tipe Mounting | Surface Mount | Surface Mount |
| Level MSL | 2 (per JEDEC J-STD-020) | 2 |
| Terminal Finish | Nickel-Palladium-Gold | — |
| Peak Reflow Temperature | 260°C | — |
| Status RoHS | Compliant | — |
| Number of Half-Bridges | — | 4 (2 H-bridges) |
| Operating Supply Voltage (VM) | — | 8 V to 37 V |
| Maximum Full-Scale Output Current | — | 2 A |
| RMS Output Current (24 V, TA = 25 C) | — | 1.4 A |
| Current Sensing | — | Integrated (no external sense resistors) |
| Decay Mode | — | AutoTune (smart-tune, adaptive mixed decay) |
| RDS(on) per FET (typ) | — | 750 mOhm (HS + LS, TA = 25 C) per TI datasheet |
| Protection Features | — | OCP, OTP/TSD, UVLO, open-load detect, fault flag (nFAULT) |
| Suhu Kerja | — | -40 C to +125 C |
| RoHS / Pb-Free | — | Yes (compliant) |