DRV8886ATPWP vs DRV8886ATPWPR Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng DRV8886ATPWP sa pamamagitan ng Texas Instruments at DRV8886ATPWPR sa pamamagitan ng Texas Instruments. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Texas Instruments
DRV8886ATPWP - 37V 2A Bipolar Stepper Driver | Texas Instruments
DRV8886ATPWP ✓ NakahandaTexas Instruments
DRV8886ATPWPR - 37V 2A Stepper Driver w/ AutoTune | Texas Instruments
DRV8886ATPWPR ✓ NakahandaPagsanggunian na paghahambing
| Parametro | DRV8886ATPWP | DRV8886ATPWPR |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Kategorya | Motor Drivers | Motor Drivers |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Motor Type | Bipolar Stepper | Bipolar stepper (2-phase) |
| Number of Full H-Bridges | 2 | — |
| Load Voltage Rating (VM max) | 37 V | — |
| Minimum Operating VM | 8 V | — |
| Logic Supply Voltage (VCC) | 3 V to 5.5 V | 3 V to 5.5 V |
| Full-Scale Output Current | 2 A (per H-bridge, 25°C PCB-dependent) | — |
| RMS Output Current | 1.4 A (24 V, TA=25°C, PCB design-dependent) | — |
| Peak Output Current | 3 A | — |
| HS + LS On-Resistance (RDSon) | 550 mΩ | — |
| Control Interface | STEP / DIR (Hardware GPIO) | STEP / DIR (indexer built-in) |
| Microstepping Levels | Full to 1/16 step | 1, 2, 4, 8, 16, 32 (up to 1/16 native) |
| Integrated Current Sense | Yes (internal sense, no external resistors) | — |
| AutoTune / Smart Tune Decay | Yes | — |
| Decay Modes | Smart tune, mixed, slow, fast (programmable) | — |
| Sleep Current | 20 µA | [DATA_NEEDED: nSLEEP quiescent current] |
| PWM Chopping Frequency | Up to 100 kHz | — |
| Hanay ng Temperature na Operasyon | -40°C to +125°C | — |
| Temperature Grade | Automotive | — |
| Packhaging | HTSSOP-24 (PWP) PowerPAD | HTSSOP-24 (PWP) with PowerPAD, 7.8 mm x 4.4 mm |
| Uri ng Pagpapasok | Surface Mount | Surface Mount |
| Level ng MSL | 2 (per JEDEC J-STD-020) | 2 |
| Terminal Finish | Nickel-Palladium-Gold | — |
| Peak Reflow Temperature | 260°C | — |
| Tindminan RoHS | Compliant | — |
| Number of Half-Bridges | — | 4 (2 H-bridges) |
| Operating Supply Voltage (VM) | — | 8 V to 37 V |
| Maximum Full-Scale Output Current | — | 2 A |
| RMS Output Current (24 V, TA = 25 C) | — | 1.4 A |
| Current Sensing | — | Integrated (no external sense resistors) |
| Decay Mode | — | AutoTune (smart-tune, adaptive mixed decay) |
| RDS(on) per FET (typ) | — | 750 mOhm (HS + LS, TA = 25 C) per TI datasheet |
| Protection Features | — | OCP, OTP/TSD, UVLO, open-load detect, fault flag (nFAULT) |
| Temperature na Operasyon | — | -40 C to +125 C |
| RoHS / Pb-Free | — | Yes (compliant) |