DRV8886ATPWP vs DRV8886ATPWPR Karşılaştırma

Ayrıntılı yan yana karşılaştırma DRV8886ATPWP tarafından Texas Instruments ve DRV8886ATPWPR tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.

Texas Instruments
DRV8886ATPWP DRV8886ATPWP - 37V 2A Bipolar Stepper Driver | Texas Instruments

DRV8886ATPWP - 37V 2A Bipolar Stepper Driver | Texas Instruments

DRV8886ATPWP ✓ Aktif

Özellik Karşılaştırması

Parametre DRV8886ATPWP DRV8886ATPWPR
Marka Texas Instruments Texas Instruments
Kategori Motor Drivers Motor Drivers
Yaşam Döngüsü Durumu Aktif Aktif
Motor Type Bipolar Stepper Bipolar stepper (2-phase)
Number of Full H-Bridges 2 —
Load Voltage Rating (VM max) 37 V —
Minimum Operating VM 8 V —
Logic Supply Voltage (VCC) 3 V to 5.5 V 3 V to 5.5 V
Full-Scale Output Current 2 A (per H-bridge, 25°C PCB-dependent) —
RMS Output Current 1.4 A (24 V, TA=25°C, PCB design-dependent) —
Peak Output Current 3 A —
HS + LS On-Resistance (RDSon) 550 mΩ —
Control Interface STEP / DIR (Hardware GPIO) STEP / DIR (indexer built-in)
Microstepping Levels Full to 1/16 step 1, 2, 4, 8, 16, 32 (up to 1/16 native)
Integrated Current Sense Yes (internal sense, no external resistors) —
AutoTune / Smart Tune Decay Yes —
Decay Modes Smart tune, mixed, slow, fast (programmable) —
Sleep Current 20 µA [DATA_NEEDED: nSLEEP quiescent current]
PWM Chopping Frequency Up to 100 kHz —
İşletim Sıcaklığı Aralığı -40°C to +125°C —
Temperature Grade Automotive —
Paket HTSSOP-24 (PWP) PowerPAD HTSSOP-24 (PWP) with PowerPAD, 7.8 mm x 4.4 mm
Montaj Türü Surface Mount Surface Mount
MSL Seviyesi 2 (per JEDEC J-STD-020) 2
Terminal Finish Nickel-Palladium-Gold —
Peak Reflow Temperature 260°C —
RoHS Durumu Compliant —
Number of Half-Bridges — 4 (2 H-bridges)
Operating Supply Voltage (VM) — 8 V to 37 V
Maximum Full-Scale Output Current — 2 A
RMS Output Current (24 V, TA = 25 C) — 1.4 A
Current Sensing — Integrated (no external sense resistors)
Decay Mode — AutoTune (smart-tune, adaptive mixed decay)
RDS(on) per FET (typ) — 750 mOhm (HS + LS, TA = 25 C) per TI datasheet
Protection Features — OCP, OTP/TSD, UVLO, open-load detect, fault flag (nFAULT)
İşletim Sıcaklığı — -40 C to +125 C
RoHS / Pb-Free — Yes (compliant)

Dökümanlar & Kaynaklar

Tüm Ürünleri Gözden Geçir BOM Oluştur Teklif İsteyin